Send email notification when a concurrent request completes with Error

{color:#0000ff}I need to setup the system such that when a concurrent request completes with the status "Error", generate/send email notification to an application user. Please advice if you know how to configure the system to accomplish this.
Note: If the concurrent request completes with status "Normal" or "Warning", do not send/generate email notification to the application user.
Thanks.
{color}

We do what amOx does. I made a concurrent program that calls a sql script, and emails me of errored jobs. It is more convenient than logging in each day. I ran this twice daily, and the sql checks for the previous 12 hour time slice (ie - twice a day run).
..colin

Similar Messages

Send email notification when my question is answered by friends

Send email notification when my question is answered by friends

babowa wrote:
This is not FaceBook.
Thank goodness.....
Could be worse. It could be Twitter

HT5654 after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails. when plugged in to sync with itunes, it remains 'stuck' at syncing step 2 of 7 backing up. has anyone had similar problems? any solutions

after update to the latest version on my ipad, it no longer connects to the internet nor can i send emails. when plugged in to sync with itunes, it remains 'stuck' at syncing step 2 of 7 backing up. has anyone had similar problems? any solutions?

I had this problem. I held down the power switch to power down completely. Takes a few seconds. Then use the power switch to turn on. Might take a couple goes.
Kirk

Inventory transaction worker request completing with error.

when running Inventory transaction worker concuurent request completing with error.
Here I attached the error message ..
Oracle Inventory: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
INCTCW module: Inventory transaction worker
Current system time is 10-OCT-2010 08:22:07
No completion options were requested.
Output is not being printed because:
The print option has been disabled for this report.
Concurrent request completed
Current system time is 10-OCT-2010 08:22:08
Regards
***SBJ***

Hi, Did relinking fix your issue?
Thanks.
Hi,
I have the same problem. The Inventory transaction errors out randomly. Did relinking fix your issue?
Thanks
A/A
Hi,
No,I didn't tried to relink INCTCW.
Please try to relink the file and see if it helps.
Also, please go through the doc referenced above and check the database log file for any errors.
Thanks,
Hussein
user13098774 wrote:when running Inventory transaction worker concuurent request completing with error.
Here I attached the error message ..
Oracle Inventory: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
INCTCW module: Inventory transaction worker
Current system time is 10-OCT-2010 08:22:07
No completion options were requested.
Output is not being printed because:
The print option has been disabled for this report.
Concurrent request completed
Current system time is 10-OCT-2010 08:22:08
Regards
***SBJ***

Send email notification when the baseline and actual values are different in project

Hi
I am working with MS Project 2013 and Project Server 2013.
I need to the send email notification to the program manager (or to a user) whenever the project manager changes the task finish date for a task. Comparison should happen with the baseline finish and the difference needs to be updated to the Program Manager
over mail.
How to configure/customize email notification for changes in MPP.
Please suggest.
Regards,
Sudhir

If you are not having developer skills it will be complicated for you.
You need to create event handler by code, as in the below link:
http://msdn.microsoft.com/en-us/library/office/gg615466%28v=office.14%29.aspx
Then compare your values and finally send email by code.
Twitter : @MShoubaki | http://jo.linkedin.com/in/mshoubaki

Submitting Customized Report Request, Completed with Error Status

Dear All ,
Good Day ,,
1- I am using Oracle Application 11.5.0
2- Application And Data Base Server Unix AI
3- created Oracle Report file (i testes all sql statmets using toad , successfly)
5- Tested the report , passed parameters , it is running successfully .
6- Cpied the reports to the next path (E:\oracle\testappl\per\11.5.0\reports\US)
7- Created Executable file (has the same name of the rdf file)
8- Created Concurrent program contains the same Executable file and the output format is 'PDF', Style = 'Landscape' , printer = 'noprint' , the added the parameters (the same named in the rdf file)
9- Added the Concurrent program to the HRMS 'Reports & Process'
10- From the HRMS Manager Responsibility , i submitted the request , passed the parameters .
11- Refresh , Pending , Runing , phase 'Completed' , Status 'Error'
12-View Log .. :
Human Resources: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
KU_PAYSLIB module: KU_PAYSLIB
Current system time is 31-MAR-2010 23:29:55
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
TIME_PERIOD_ID='442'
ORGANIZATION_ID='1424'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
stat_low = 84
stat_high = 0
emsg:was terminated by signal 4
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program was terminated by signal 4
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 3192426.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 31-MAR-2010 23:29:56
12-When i change the output format to XML it completes with 'Normal Status' but , the next Log is appearing :
Human Resources: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
KU_PAYSLIB module: KU_PAYSLIB
Current system time is 31-MAR-2010 23:36:19
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
TIME_PERIOD_ID='442'
ORGANIZATION_ID='1424'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/oracle/testora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.28.0 - Production on Wed Mar 31 23:36:20 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 3192428
Number of copies : 0
Printer : noprint
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 31-MAR-2010 23:36:21
Thanks A lot

>
emsg:was terminated by signal 4
>
For this issue , pl see the solutions in this related thread - Re: The Concurrent Manager and Programs is failing random
>
REP-3000: Internal error starting Oracle Toolkit.
>
This typically indicates that an X server is not running on the Unix server. Pl see these MOS Docs
200474.1 - Comprehensive REP-3000 Troubleshooting and Overview Guide
207532.1 - Troubleshooting Tips for REP-3000 Error when Running PDF/POSTSCRIPT/HTML Reports
Searching on this topic in these forums will also retrieve many hits.
HTH
Srini

Sending Email Notification on Cancellation of Request

Hello Everybody,
Can someone please tell me , how to send a email notification to a user when he ,himself , or the system admin cancels that request ?
Say if a user raises a request to get provisioned to a resource.
If he or the system admin cancels that request, then
how to send a email notification to that user.
Any help/suggestion will be appreciated a lot.
Looking forward to a reply.
Regards,
Shriram.

Hi Shriram
In the provisioning process of that resource, Go to the provisioning task.
In that task window, Goto "Task to Object status mapping". There you should see one category as cancelled. Assign a status to that category. Now goto the notification tab and configure notification for that status.
I hope This is the answer you were looking for.
-Kiran Thakkar

Send Email Notification when comment blog in Sharepoint 2010

Hi,
Anyone can help me, when i comment on the blog, then send email directly ?. According to this link http://www.sitefinity.com/devnet/forums/sitefinity-3-x/general-discussions/blog-comment-notification.aspx
Its make some development or modifications, beside that is there any other way to do that without making modifications? probably just setting up in sharepoint admin?
Please advice,
Regards

Hi
I just found out that the the blog comments are stored in a list
htp://yoursite/Blog/Lists/Comments/AllComments.aspx
So you can write a workflow to send an email when a new item is created in this list.

Need Help of Sending Email Notification when new task assigned

Hi all,
How can we send a email alert notification for existing lead or new lead, when a new Task is assigned to particular person. Here in my requirement daily n number of tasks assigned to executives. So how can i send the same.
Thanks in advance.
Regards,
Ratan

Hi Ratan,
It is not clear from your question whether you are trying to trigger the email notification for the task or the lead, but it doesn't matter. You'll need to write a WF for the Lead/Task and trigger it when a new record is created and then in actions select the email notification.
Best of luck

Script to send email notification when sql server stops..

Hi,
I am looking for a script through which I can monitor sql server service status and if it down for any reason, I want to send email to Dba team. How to achieve this? Did anyone has already done similar kind of monitoring?
Again, I am not looking for any 3rd party monitoring system like SCOM etc.. I looking for a batch file or script outside sql which can solve this.
Any help would be greatly appreciated.
Thank you.

There are two ways to do it:
1). There is a job option wherein you can put the alert message and then in schedule option, select to alert you only when Sql Agent Services get restarted. So this way you will come to know when Sql Agent Services got restarted.
2). From any centralize\third server apart from your database server\host, you can put a job to execute almost around every 5 minutes to check service status and then call a batch file which will call OSQL code to execute sql code for sending alert
based on the message content you want to like below:
Scripts below, even you can tweak more on this as per your environment requirement and even you can merge some scripts to make one out of two or similar, however keeping each separate one helps to track scripts.
First Batch File with Name: ServiceStatusCheck.bat
with below content
Echo "Checking Service Status"
:Query
FOR /F "tokens=4 delims= " %%A IN ('SC QUERY "XXXXXXXXServiceNametobeCheckedPutHere" ^| FIND "STATE"') DO SET status=%%A
IF "%status%"=="STOPPED" GOTO Shootout
:Shootout
'email for success in first attempt
'Put path of batch file
"D:\Script\Successemail.bat"
Exit
Second Batch file with below content which will call Sql file to send alert: File Name: Successemail.bat
ECHO "Send Email Alert"
OSQL -E -S XXXXXXXXX -i "D:\Script\Successemail.sql"
ECHO "Done"
Exit
Third Sql File to send email: File Name: Successemail.sql
Declare @bodyT varchar(200)
Set @bodyT =
'Service was found in stopped status and Date & Time::'
+replace(convert(varchar(20),GETDATE(), 102),'.','/')
+'::'
+convert(varchar(20),GETDATE(), 108)
EXEC msdb.dbo.sp_send_dbmail
    @profile_name='Profilename',
    @recipients = '[email protected]',
    @body = @bodyT,
    @subject = 'Service was found in stopped status, Check Details!!'
GO
Santosh Singh

Using Alert Framework to send email notifications when Process Chain fails

Hi Everyone,
I've configured ALRTCATDEF in Solution Manager, selected the alerting option for Process Chains in - RSPC > Attributes > Alerting, but it looks like whenever any process chain fails, an email notification will be sent to the same recipients.
Is there anyway to have an ALRCATDEF - alert category for different process chains, so that different recipients receive notifications for different Process Chains.
Thanks,
Ken

Interesting....I was actually hoping for different recipients for different process chains.
E.g. for our
CRM process chain - Support Team 1
FI process chain - Support Team 2
and so on and so on.
I think the only way may be creating a custom process type and implementing a class for this process type that calls function SALRT_CREATE_API. Then adding this process type to the process chain, with a different variant for each.
However if anyone knows a way to do this in a SAP standard way using the Alert Framework, that would be great.
Cheers,
Ken

Request completed with error

the Concurrent request "Billing and Receipt History" is completing with following error message:
Enter Password:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP--1870639101: MSG-00101: Consolidated Billing Profile: Y
REP-0081: Error during file I/O operation.
REP-0124: Unable to write to the temporary file.
scafa 3
REP-0002: Unable to retrieve a string from the Report Builder message file.
REP--1870639101:
following is the filesystem status:
df -gFilesystem GB blocks Free %Used Iused %Iused Mounted on
/dev/hd4 0.50 0.46 8% 2461 3% /
/dev/hd2 2.00 0.17 92% 45635 52% /usr
/dev/hd9var 1.00 0.92 9% 2661 2% /var
/dev/hd3 3.50 0.65 82% 10424 7% /tmp
/dev/fwdump 0.50 0.50 1% 4 1% /var/adm/ras/platform
/dev/hd1 0.50 0.47 6% 252 1% /home
/proc - - - - - /proc
/dev/hd10opt 0.50 0.37 27% 2079 3% /opt
/dev/testdblv 20.00 11.14 45% 41930 2% /testdb
/dev/testdatalv 120.00 56.96 53% 78 1% /testdata
/dev/testappslv 56.00 15.48 73% 575441 14% /testapps
Please suggest any help.
Regards,
M.U.N.A

Try to delete the files from the /tmp directory and see if this helps.$ df -g
Filesystem GB blocks Free %Used Iused %Iused Mounted on
/dev/hd4 0.50 0.46 8% 2461 3% /
/dev/hd2 2.00 0.17 92% 45635 52% /usr
/dev/hd9var 1.00 0.92 9% 2661 2% /var
/dev/hd3 3.50 3.39 4% 2541 1% /tmp
/dev/fwdump 0.50 0.50 1% 4 1% /var/adm/ras/platform
/dev/hd1 0.50 0.47 6% 252 1% /home
/proc - - - - - /proc
/dev/hd10opt 0.50 0.37 27% 2079 3% /opt
/dev/testdblv 20.00 11.14 45% 41934 2% /testdb
/dev/testdatalv 120.00 56.93 53% 78 1% /testdata
/dev/testappslv 56.00 15.47 73% 575448 14% /testapps
/dev/stagelv 51.00 7.22 86% 112970 7% /stage
/dev/visapp 40.00 9.56 77% 625906 22% /visapp
/dev/visdb 160.00 19.87 88% 42126 1% /visdb
$
Also, try to submit the concurrent program with smaller ranges of data (if application -- not sure what parameters you pass to this concurrent program).Request completed Normal with 100 records
If none of the above helps, log a SRShould I log SR if issue remains for huge number of records?

Send email/notification when server shutting down?

Is it possible to send out a notification via e-mail (or maybe even text) to all the users listed in the user accounts when the server is shutting down? We have been experiencing some severe weather here and I need to shut the server down on occasion when the power starts to gray out/black out. I would like to automatically initiate an emails alert to the users when OS X Server gets a shutdown commend. Can this be done?

Consider acquiring and configuring a less-interruptible power supply, and configure that to communicate with OS X Server via USB; options that will work include the APC SmartUPS supplies I've tried. (OS X Server doesn't generally "appreciate" having the power yanked, and if the grid is already greying out, it's a little late; I don't know that I'd trust the shutdown to complete.)
If you're shutting down the system via ssh session or equivalent (and not the GUI), you could write a shell script that does what you need prior to issuing the shutdown command.
If you're shutting down via UPS, there's a script that can be used but it's kinda far along and unlikely that mail or SMS will be read before the server is offline.

BPM Alerts not sending email notifications

Hello Experts,
I've successfully configured BPM within SolMan and alerts are being generated but I'm not receiving any email notifications. In the setup of Business Process Monitoring, "Contacts" have been maintained within the Solution Directory as well as the notifications section of the monitoring type with a sender and a valid recipient address . Both yellow and red alerts are being generated but no email notifications are being sent. Thresholds have also been maintained.
Researching other threads regarding this same issue points to tcode RZ20->SAP CCMS Technical Expert Monitors ->All Monitoring Contexts->BPM->Activate Maintanance Function-> and assiging Central auto reaction methods to MTE Class BPMRoot Context and the other BPM_APPMON_* MTE classes. Is there something that I am missing in order to have these alerts send email notifications when the alert threshold is reached?
I also defined the new Central Auto Reaction method and maintained the parameters properly which calls FM DSWP_BPM_SEND_ALERT. Please assist as I have exhausted all options. Please provide a step by step guide to setup alert notifications if possible.
Thanks
Mike

These notes might help you
[https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=543414]
[https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=546981]
check the timezone settings also [https://websmp130.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=572608]
regards
Naveen

Unable to send Email Notification for Oracle Identity Manager 11g for users

Hi All,
Can anyone please share a workaround to send email notifications when user is created through trusted recon in OIM 11G.Please Help Me out.
\oim_user

Hi
Do you just create the user in OIM and not anywhere else?
I have cofigured notification on the the target resources that i automatically assign to users as soon as they are created via trusted recon. Let say a user gets AD rersource. Ill notify whoever i want from there.
Another way i did it was using the post eventHandler code. I call an email service to notify admins on the status of the recon and post recon eventhandlers. snippet below..
tcEmailNotificationUtil emailNotificationUtil = new tcEmailNotificationUtil(dbReference);
emailNotificationUtil.constructEmail(emailTemp);
emailNotificationUtil.setBody(buildMailBody(message));
emailNotificationUtil.sendEmail(toAddress);
Let me know if this gives you an idea.

Send email notification when a concurrent request completes with Error

Similar Messages

Maybe you are looking for