Send Email Using PDF Maker for Word 2007

I am using Word 2007 with the Acrobat PDFMaker Office COM add-in. When I try to Mail Merge to a PDF, I get an error message that says "Acrobat PDFMaker was not able to mail merge the document." I click OK, and a new box says "Run-time error '5825'". Any ideas?

This thread may have your answer:
http://forums.adobe.com/message/1924439
(Paul_Kuczmierczyk) writes:
6. Dec 18, 2008 10:09 AM in response to: (Ray_Whitfield)
Re: PDF Maker Mail Merge error
I've had this same problem with one word document and I think I figured out what is going on, at least in my case. I'm using Word 2003. I tried a test of one merge record, and it worked, but when I tried to complete the entire merge, it failed. After trying several times to no avail, I noticed that the first word in my document had the red spell check underline, even though the word was not spelled wrong. When I placed my mouse cursor in front of the first letter of the word, the font information said "ZWAdobeF" and the size was 1. After I deleted this and tried the merge to e-mail through the Adobe plugin, it worked flawlessly. After the merge was completed however, that font reappeared in front of the first word in my document.
I hope this helps some people out there.
Also, I'm using Adobe Acrobat 8 Professional, Windows XP SP3.

Similar Messages

How to insert a Chart using Template Builder for Word 2007

Hello,
I am trying to insert a chart in my report, but the OK button in the Chart dialog box is disabled. I am able to move the data but OK button would never become available.
Does anybody knows what happend?
I' using BI Publisher 10.1.3.4 and Word 2007
Any help would be really appreciated :)
Regards,
Blanca

Hi,
Probably this will help you.
Uninstall the template builder for word and restart you system and re-install it.
Because this is add in component in MS Word.So some times this installation is not perfect.Try it once.
I hope this will work

PDF Maker Crashing WORD

I am asking a question for a change and have not been able to find the search to look for past answers. Anyway, I have a WORD file (269 pages and 23MB) on which I have tried using PDF Maker in WORD 2007 (and 2010). First, using all the variations of AA (8 and above) that I have for 2007, the Adobe PDF printer has worked fine. However, only AA8 has worked for the file with WORD 2007. With 2007 and AA9.52 and the newest AA and WORD 2010, WORD crashes when page 62 is reached. My student has the same problem. I have clipped pages around p. 62 to a new PDF and now the crash appears at p. 3 (I did this to be sure it was not a file size issue, though I still had emptied the TEMP folder).
Apparently something in the DOC (not DOCX) file is causing an issue. Any suggestions of what to look for?
In the meantime, I will try to delete portions to see if I can find the problem. However, after a while WORD puts PDF Maker in the bad guys location and I have to fish that out to reactivate it. Yes I know that I am finally on the receiving end of the problem rather than trying to suggest solutions. I suspect I will be able to track it down as to the cause, but thought someone might have an idea to speed up the process since I can't seem to search for a solution (pointing me there would be nice also). At least we can use the printer and so this is not a do or die situation.

I traced the problem down to a bitmap. When I tried to clip the bitmap, I got a message in Irfanview (graphics package) that the image could not be converted. When I chose edit drawing, I was able to clip the bitmap out and back into the document. Then PDF Maker was used with no problem after this copy process. The issue is really trying to trace down to the bad image or font (in this case an image), copy it and then reinsert the image. Was then able to apply PDF Maker.

PDF Maker - Converting Word 2010 headlines to PDF Bookmarks

Hi Guys,
I'm facing some issues within my organization using the Adobe Acrobat PDF Maker for Word 2010.
Since version 10.1.1 it seems that the bookmark creation tool malfunctions .
I'm trying to produce a PDF bookmarks based on word 2010 headlines , when I'm comparing version 10.1.1 output to 10.1.2,10.1.3,10.1.4 and even 11 outputs I can notice a variety of changes although all my settings are identical .
Is there any known issue regarding this problem ?
As for now - I cannot upgrade any of my users to any version higher than 10.1.1.
Should I report a new bug ?
Any help will be really appreciated .
Thanks !

No I was referring to the post that started this thread:
"I'm facing some issues within my organization using the Adobe Acrobat PDF Maker for Word 2010.
Since version 10.1.1 it seems that the bookmark creation tool malfunctions .
I'm trying to produce a PDF bookmarks based on word 2010 headlines , when I'm comparing version 10.1.1 output to 10.1.2,10.1.3,10.1.4 and even 11 outputs I can notice a variety of changes although all my settings are identical .
Is there any known issue regarding this problem ?
As for now - I cannot upgrade any of my users to any version higher than 10.1.1.
Should I report a new bug ?
Any help will be really appreciated .
Thanks !"
Sound like appearanced order is changed between the different versions. He saying if you set up Bookmarks in one version it should look the same in all versions. Apparently the organization (Business) he belongs to, each station have different version of Acrobat.
The best answer would be have evenone update or upgrade to the same version.

Inability to use eps graphics in Word 2007 and make a pdf

Hi there …
I work at a small "intellectual capital" company where virtually all of our documents (our products!) depend on embedding eps "pictures" into Word and pdf'ing the result. While this process works great in Word 2003, it fails miserably in Word 2007 - the "mechanics" work fine and a pdf is produced, but the rendering of the eps images are terrible. I spent some effort looking into this issue trying to find a solution and came up with the following (thanks in part to this post) ... if anyone has any more details, corrections, or solutions feel free to post!
It appears that, over the years, there have been three flavors of eps import filters for Word ... (for the curious the filter is found in Program Files\Common Files\Microsoft Shared\Grphflt\EPSIMP32.FLT )
The simplest (and oldest) filter basically embeds the eps code unmodified into the Word doc and will display a raster preview of the image if one is included in the eps file. if the file is printed on a postscript printer or to Acrobat, the eps code is passed through (so it produces perfect pdfs, and the screen image in Word looks as good as the preview image embedded in the eps file). if the file is printed to a generic printer, no image appears (so it doesn't work for joe user).
The Word 2003-era filter pastes the eps code unmodified into the Word doc, then renders a (very poor) preview image (using an OEM'd eps converter). if a preview image is in the eps file it is ignored (which is bad). if the file is printed on a postscript printer or to Acrobat, the unmodified eps code is passed through (so it produces perfect pdfs, though the screen image in Word looks yucky). if the file is printed to a generic printer, the poorly rendered preview image is printed (so it works poorly but better than nothing for joe user - and probably gives joe user a bad impression of eps).
In what might be an attempt to improve things for joe user, the Word 2007 filter immediately interprets the eps code (using a slightly updated eps converter from the same OEM) and pastes the resulting rendered image into Word. It NO LONGER embeds the unmodified eps code in the Word doc. While the rendered image looks better than filter #2, it still leaves A LOT to be desired - in my brief testing, colors are VERY wrong and curves become choppy. if the file is printed on a postscript printer or to Acrobat, the poorly rendered image is used since the original eps code is gone (unacceptable for my purposes). if the file is printed to a generic printer, the poorly rendered image is printed (so it works better than Word 2003 for joe user).
So where does this leave anyone that wants to upgrade to Word 2007, use eps images, and make quality pdfs ??
Filters #1 & #2 were interchangeable in Word 2003. The true eps experts like #1 the best, and it is by far the simplest technically (76k of code vs 400+k), so they merrily swapped and used it with Word 2003. (Very) unfortunately filters #1 and #2 do not work with Word 2007 - if they did the problem would be nicely solved.
Find another graphics file format to work with? This is undesirable because the "beauty" of #1 & #2 above is the unmodified eps code gets fed to the pdf maker (which itself is native eps) - Word is just a transport (no "transcoding" loss in compression-speak). if there were an efficient way to convert eps to say wmf (microsoft's proprietary vector graphic format), and the images were able to survive two transcodes (from eps to wmf back to eps for pdf), it might be livable. But of course Adobe Illustrator cannot save as wmv (nor should it IMHO). Of note - there is another industry standard vector format - svg - which AI can save as but Word does not support.
Stay in Word 2003 doc format while using Word 2007 (don't use docx). Doesn't work. My testing shows a Word 2003 doc file with embedded eps created in Word 2003 (and pdf's correctly in Word 2003) does not pdf correctly in Word 2007.
Use a work-around. As suggested here, "Open the EPS in Illustrator. Select all, and Edit > Copy. In Word, Edit > Paste Special > Enhanced Metafile." This seems to work for small images such as logos, but not for larger graphical stuff (probably because of the internal transcoding to WMF).
Stay with Word 2003. This appears to be the only workable option for now IF you want to use Word and render eps pictures in pdf's with acceptable quality.
IMHO the best solution would be to have the very simple 76k filter #1 ported to Word 2007 (those who need the capability can swap the filter files) or (not as optimal but does not require swapping filter files) add the option in filter #3 to still embed the eps code. Microsoft is the right place to do it, or (politics aside), Adobe could and should do it (given some support from MSFT).
I am surprised this issue has not caused more rumblings from users - perhaps it has, the symptoms are just worded differently. Or maybe everyone is just staying with Word 2003 (which is what I have done until now). The problem is most companies are being forced to upgrade now, so I think this will become a bigger issue for Adobe / Microsoft going forward.
Thanks for listening. I look forward to your comments.
Andy

Microsoft has released a hot fix that supposedly addresses this issue, it is at
http://support.microsoft.com/kb/977468
I downloaded the fix and tried it; it actually made the problem worse! Apparently they
are trying to fix their filter rather than bypassing it. What I am doing is
1. Making maps in AutoCaD Map and printing (plotting in autocad) them to a pdf file
2. Opening the pdf file in Acrobat and resaving it as eps
3. Importing the eps file into a Word 2007 document
4. Use Acrobat to convert the Word document to pdf
Before the hot fix when I did the process the resolution of the map in the final
pdf file was not as good as in the original made from AutoCad. Also the colors were
not correct. After installing the hotfix there are still these same problems but also now
any non horizontal text is not displaying correctly.
Be careful about trying this hotfix.
As others have noted, back in Word 2003 the above steps 1 - 4 worked very well and resulted
in a high quality pdf file with the map as good as in the original pdf.

Does any one have a sample code for sending email using IMAP ?

Hi
thank you for reading my post
I have tried to use SMTP and because of some problems i could not use it and i must use Imap (authentication required)
here is my SMTP code , does any one know how i can tune it to use Imap , or has a code snippet to send email using Imap ?
thanks
private static void postMail(String[] recipients, String subject, String message,
 String from) throws MessagingException {
 boolean debug = false;
 class SMTPAuthenticator extends javax.mail.Authenticator
 public PasswordAuthentication getPasswordAuthentication()
 return new PasswordAuthentication(mail_usrname,mail_password);
 //Set the host smtp address
 Properties props = new Properties();
 FileInputStream fis;
 try {
 System.out.println("Loading property file");
 fis = new FileInputStream(new File("c:/email.properties"));
 props.load(fis);
 System.out.println("property file done");
 } catch (FileNotFoundException e) {
 System.out.println("file not found");
 e.printStackTrace();
 } catch (IOException e) {
 System.out.println("can not read properties file");
 e.printStackTrace();
 /*props.put("mail.smtp.user", mail_usrname);
props.put("mail.smtp.host", smtpHost);
props.put("mail.smtp.port", smtpPort);
props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.socketFactory.port", smtpPort);
 // create some properties and get the default Session
 Authenticator auth = new SMTPAuthenticator();
 Session session = Session.getDefaultInstance(props, null);
 session.setDebug(debug);
 // create a message
 Message msg = new MimeMessage(session);
 // set the from and to address
 InternetAddress addressFrom = new InternetAddress(from);
 msg.setFrom(addressFrom);
 InternetAddress[] addressTo = new InternetAddress[recipients.length];
 for (int i = 0; i < recipients.length; i++) {
 addressTo[i] = new InternetAddress(recipients);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/HTML");
System.out.println(msg.toString());
Transport.send(msg);

Please try this out!!!!!!!!!
You can send emails using Outlook also. You can send email over Microsoft Exchange with this object (or another email server, using IMAP/POP).
Sub SendMailOutlook(aTo, Subject, TextBody, aFrom)
'Create an Outlook object
Dim Outlook 'As New Outlook.Application
Set Outlook = CreateObject("Outlook.Application")
'Create e new message
Dim Message 'As Outlook.MailItem
Set Message = Outlook.CreateItem(olMailItem)
With Message
'You can display the message To debug And see state
'.Display
.Subject = Subject
.Body = TextBody
'Set destination email address
.Recipients.Add (aTo)
'Set sender address If specified.
Const olOriginator = 0
If Len(aFrom) > 0 Then .Recipients.Add(aFrom).Type = olOriginator
'Send the message
.Send
End With
End Sub

The numbering format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended

The numbering in (Contents) format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended.

The issue is that I have made up a contract in Word.
The second page has a list of all contents of the contract.
gghhjhhbhbhhbhbjbhj....1
bv v vghvjvjnnnnnnnnn....2
When we convert to PDF some of the numbers change. Example 20 becomes 201.
Your help is appreciated.
Cheers Ocean designs.

Hi, I have used PDF export for some years. One file will NOT convert to readable text in Word. Some

Hi, I have used PDF export for some years. One file will NOT convert to readable text in Word. Some headers and maps in this document are converted OK but the body text is garbled. I have tried converting to Docx, Doc and RTF with no success. I disabled OCR and it made no difference. What can I do please?
Les

Hi,
Can you please provide me the file with which you are facing the issue.
Thanks

Writable PDF created with word 2007

Hello. My company created a PDF file from word 2007 in wich is possible to write. Form my PC (with adobe ten version, but even with the oldest version) is possible to write in, but not with my IOS version. A few month ago I try to use the with my Iphone and it was possible to write in the PDF file. Now I bougth an Ipad mini and it's not possible to write in with it an with Iphone too. Someone know why?!
Thank you!

quoque,
Thank you for sharing the PDF form with us.
I took a look at the PDF form in Adobe Reader for iOS and found out that it is protected, as indicated by the lock icon in the bottom bar.
The following is the screenshot of the Document Properties dialog (shown in the desktop version of Acrobat/Reader).
Your company's PDF form contains document restrictions with password security. (Only those who know the password can change the document restrictions of the PDF form.)
The dialog shows that the PDF form allows "Filling of form fields". However, if you add any document restrictions to a PDF document, the document will be encrypted for protection.
Unfortunately, Adobe Reader mobile products (for iOS, Android, etc.) do not support any changes to encrypted documents yet. That is the reason why you cannot fill out the form. It is a limitation in Reader mobile products. (There's nothing wrong with the PDF form itself.)
If you would like to make the PDF form "fillable" in Adobe Reader mobile products (as well as desktop products), you could remove the document restrictions and password security or regenerate a new PDF form from MS Word without setting any restrictions. But I am not sure if it is a feasible solution for your company.
Sorry for the inconvenience. Please let us know if you have further questions.

Convert to PDF in MS Word 2007, with CS2

Hello,
At work I have a menu/ribbon for "Convert to PDF" within Word 2007. At home, I am using Adobe CS2 and don't have this in Word. Is it available with CS2? I also don't seem to have Adobe PDF installed as a printer either, even though I have Acrobat installed. I'm using Windows 7.

I don't remember which version of Acrobat comes with CS2, thing it is AA7. Anyway, AA8.1 is needed as a minimum for WORD 2007 - PDF Maker use. If you do not have at least this version of Acrobat, you will have to just print to the Adobe PDF printer.

FAQ About Adobe LiveCycle Designer (send email) as PDF

HI my name is saeed and i want ask about when i make application form on this program i want put button (send email) as PDF not XML or html i meaning he send me email after full the application as Attach fail PDF not xml or html is this possible.
have god day
saeed

Goto command prompt and type ipconfig
You will get something like this:
Use the IP Address instead of the word hostname.
In my case, it would be http://10.13.34.155:8080/ReaderExtensions
The you will get something like this:

Sending email using IMAP through SMTP Port 587

Hi,
I have been sending Mail Merged email to people in organizations that I am active in, using IMAP embedded in StarOffice 5.2 (on Windows 98 Second Edition). This worked fine until a few weeks ago when I received an error message stating that AOL, as part of their anti-spam efforts, was no longer accepting third-party emails on default port 25. All third-party email must now use port 587. I looked in the IMAP dialog and in the Tools -> Options dialog, but did not see any place to change the SMTP port. The AOL error message information page had instructions for changing the port in other applications (Outlook, Eudora, etc.), but not for StarOffice. So, I have some questions:
1.Is it possible to change the port in StarOffice 5.2?
2.If not, how does StarOffice 8 send Mail Merged email? Does it use IMAP, and if so, can the port be changed?
3.Also, I like the integrated configuration in StarOffice 5.2, where database fields can be directly accessed in the Insert -> Fields -> Other dialog. In looking at the Mail Merge section in "SO8_What's New.pdf", it appears that Mail Merge in StarOffice 8 is restricted to predefined fields. Could I still access fields from my existing databases?
These is a lot of questions, but right now I am blocked from sending Mail Merged emails which is imparing communications with volunteers who are running educational programs. I appreciate any and all help that anyone can provide.

Please try this out!!!!!!!!!
You can send emails using Outlook also. You can send email over Microsoft Exchange with this object (or another email server, using IMAP/POP).
Sub SendMailOutlook(aTo, Subject, TextBody, aFrom)
'Create an Outlook object
Dim Outlook 'As New Outlook.Application
Set Outlook = CreateObject("Outlook.Application")
'Create e new message
Dim Message 'As Outlook.MailItem
Set Message = Outlook.CreateItem(olMailItem)
With Message
'You can display the message To debug And see state
'.Display
.Subject = Subject
.Body = TextBody
'Set destination email address
.Recipients.Add (aTo)
'Set sender address If specified.
Const olOriginator = 0
If Len(aFrom) > 0 Then .Recipients.Add(aFrom).Type = olOriginator
'Send the message
.Send
End With
End Sub

PDF embedded in Word 2007 won't open in final PDF

Hello -- I've embedded a PDF into a Word 2007 doc using Insert > Object > Create from File (and displayed as an icon). I can double-click to open the PDF while in Word, but after converting the file to PDF (using the "Create PDF" function, not printing to PDF), the "embedded" PDF is just a picture of the icon -- nothing opens. I've used the same procedure previously and had no problem opening the embedded file, and I don't think I changed any settings anywhere...but obviously I could be wrong... BTW, I'm using Acrobat 9 Pro. Any ideas? Thanks,
JG

Hi Steph99,
In addition to the reply from Paul
P Clement IV
above, the other Microsoft areas relating to
WORD in Office you could try asking in are;
http://social.technet.microsoft.com/Forums/en/word/threads
and
http://answers.microsoft.com/en-us/office/forum/word
Regards,
Click this link to see the NEW way of how to insert a picture into a forum post.
Installing VB6 on Windows 7
App Hub for Windows Phone & XBOX 360 developers.

BEx Broadcast - Not able to send email as PDF attachment

Hi All,
We have BI 7.0 and EP 7.0 of SP12.
From BEx broadcasting we couldnt able to send email in PDF format, but other format like HTML, Link, MHTML can able to send
It gives error like
Error:java.lang.ArrayIndexOutOfBoundsException
Error occured during the processing of framework class CL_RSRC_PRODUCER_PRECALC, type, PROD
Pls give me some input on this regard
Thanks
Karthik

Prerequisites - You selected Broadcast to Printer as the distribution type when you created the broadcast setting.
http://help.sap.com/saphelp_nw2004s/helpdata/en/13/f76f422f91c153e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/bf/220c40ac368f5ce10000000a155106/content.htm
Configuration - Broadcasting
http://help.sap.com/saphelp_nw2004s/helpdata/en/84/30984076b84063e10000000a1550b0/content.htm
https://forums.sdn.sap.com/click.jspa?searchID=4204837&messageID=2091321
https://forums.sdn.sap.com/click.jspa?searchID=4204809&messageID=2816847
Some Insights-
The PDF printing can be done from a BEx Web Application, BEx Web Analyzer, or BEx Report Designer. There are no current plans to make this available in the BEx Analyzer.
From the BEx Analyzer, you can use the "launch in web" functionality to then initiate print to PDF.
Hope it Helps
Chetan
@CP..

Send email using Orchestrator email object

We encounter intermittent issues while sending email using the Orchestrator email object. We've tried supplying values (anonymous/anonymous) for SMTP authentication, but this doesn't help. Is
there a beta fix available for this error? Is there a
workaround other than what is specified?<o:p></o:p>
Error Details:
Error sending e-mail. Exception in sending email: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated
 at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
 at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
 at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
 at System.Net.Mail.SmtpClient.Send(MailMessage message)
 at SendEmail.Send(SendEmail* )

I had this message also when you do not specify a seperate account for authentication and use the service account instead.
I suggest to make a seperate service account for mailing from orchestrator and set the credentials in smtp authentication. make sure to give this account a mailbox on his own OR give it the 'send as' rights on another mailbox and set the mailaddress
as the send adres. (note: make sure you use the send as rights and not the send on behalf rights, as this doesn't work, also do not use both the send as AND the send on behalf permission at the same time.)
when setting the send as permission take note that in exchange this default can take up to 2 hours to be effective.
regards,
Louis

Send Email Using PDF Maker for Word 2007

Similar Messages

Maybe you are looking for