Send Error Type or Description of failed messgaes in body of mail using SMTP adapter
Hi,
I want to send failed messages error type or description to admin to notify him for error occurs in BizTalk, with Error description in body part.
I have set Send port option for "Enable routing of failed messages" and created a send port having SMTP adapter. Now in body I want to send error description.
Pls advise how can I achieve this.
-- Kind Regards Sandeep
When failed message routing is enabled, BizTalk Server does not suspend the message—it routes the message instead.
When a failed message is generated, BizTalk Server promotes error-report-related message context properties and demotes regular message context properties before publishing the failed message. Compare this to the default behavior when
failed message routing is not enabled: Messages that fail are suspended. --------
MSDN
So if i were in this situation i would prefer to route the failed message to SMTP as well as to some kind of transport from which i can again receive the message ( like MSMQ or File).
I mean create a send port group and bind 2 send port to this group (SMTP and MSMQ) and bind this group to that orchestration (specified in previous post) which subscribe the Failed Messages. Then bind the MSMQ location to your receive
location to retry.
I am not sure wheather it is the optimal solution or not ..... but it will work. Kindly let me know if you are not clear with what i said.
Regards
Similar Messages
-
SMICM error while sending mail using SMTP server
Hi All,
We are not able send mails using SMTP server.
We have made every settings necessary in SCOT, SO16 , SMTP service is activated, default domain is maintained etc
Only things which seems to be wrong is in SMICM trace file.
[Thr 13] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 29;10.26.24.44:1090) [nibuf.cpp 4608]
[Thr 13] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2321]
This error is getting repeated in it.
BUt I am not sure why it it trying to hit 10.26.24.44, as we dont have any server by this ip. The ip is only not resolvable from the server.
1 more thing, at OS level, following parameter is maintained in profile :
icm/server_port_1 = PROT=SMTP,PORT=25000,TIMEOUT=180
But in SCOT, under SMTP node PORT is given as 25.
Kindly let me know what going wrong here?
Thanksalso getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript() -
Sending an email with text Content using SMTP Adapter.
I am trying to send an email Message with the .txt attachment using SMTP adapter. I am getting an XML input and I am mapping the input Schema to Flat File Schema. I am trying to Send this Flat File(.txt attachment) in the Email. But I am receiving it as
HTML format only.
The Expression in the Message Transform is,
SMTPUtils.Part.SetContentType(OutgoingFlatFile_Msg.BodyFlatFile,"text");
OutgoingFlatFile_Msg(SMTP.EmailBodyTextCharset)="UTF-8";
DynamicEmailPort(Microsoft.XLANGs.BaseTypes.Address) = "mailto:[email protected]";
OutgoingFlatFile_Msg(SMTP.CC) = "[email protected]";
OutgoingFlatFile_Msg(SMTP.Subject) = "TESTMAIL";
OutgoingFlatFile_Msg(SMTP.From) = "[email protected]";
OutgoingFlatFile_Msg(SMTP.SMTPHost) = "smtp.org";
OutgoingFlatFile_Msg(SMTP.SMTPAuthenticate) = 0;
The Email attachment is HTML format,
<?xml version="1.0" encoding="utf-8"?><ns0:Root xmlns:ns0="http://SampleSMTPEmail.OutgoingFlatFile"><Record><CustomerID>Cus001</CustomerID><OrderID>Ord001</OrderID></Record></ns0:Root>
How to attach the .txt file to the email.Have you tried the following steps:
Create the message (“msgEnvelope”) as a Multi-Part message, with the required message in the Message Body Part (“Attachment”)
Set the following properties of the Envelope Message:
msgEnvelope(SMTP.Subject) = <Email Subject>;
msgEnvelope(SMTP.From) = <Sender Email>;
msgEnvelope(SMTP.SMTPHost) = <Email Host name>";
// This is the default value
msgEnvelope(SMTP.SMTPAuthenticate) = 0;
// Set the message text included in the email
msgEnvelope(SMTP.EmailBodyText) = <Text in body of email>;
// Important - This is required if the EmailBodyText is set
msgEnvelope(SMTP.EmailBodyTextCharset) = "utf-8";
// A value of '1' means include Message Body Part as email attachment
msgEnvelope(SMTP.MessagePartsAttachments) = 1;
Set the following properties of the Message Body Part (“Attachment”):
// Important - Change this MIME type if not sending a Text file
msgEnvelope.Attachment(Microsoft.XLANGs.BaseTypes.ContentType) = "text/plain";
// Set the Filename of the attachment
msgEnvelope.Attachment(MIME.FileName) = <Physical name of the attachment>;
Set the following property on the Dynamic Send Port:
// We set the Email Address on the Port itself
Dynamic_Send_Port(Microsoft.XLANGs.BaseTypes.Address) = <recipient email address>;
http://biztalktalk.wordpress.com/2008/08/28/sending-attachments-through-a-dynamic-send-port/
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Sending mail using smtps protocol
Could anyone post a piece of code to show how to send a message using smtps protocol?
SSLNotes of 1.3.2ea version say that it's possibile, but i tried whithout success....
ThanksHello,
I can send the mail using SMTP with the help of java mail api. But i want to send mail using SMTPS protocol using java. The mail should be encrypted format.
So, my queries are:
1. How to send mail using SMTPS protocol?
2. I want to send the mail as encryption mail. So how to create encrypted mail.?
Thanks in advance.
From
Rajendra. -
Why do i get an error 66 when i sent a mail use SMTP Email Send File.vi?
When i use SMTP Email Send File.vi,it works very well for some special mail sever such as the sever of my company,For others,while debugging it ,i use a free email address from 163 (http://mail.163.com/) or Sina(http://mail.sina.com.cn/) i get an error 66.I use the default sever port number(incoming mail sever(POP3):110,Outgoing mail sever(SMTP):25).
Server information for 163:
incoming mail sever(POP3)op3.163.com
Outgoing mail sever(SMTP):smtp.163.com
Server information for Sina:
incoming mail sever(POP3)op3.sina.com
Outgoing mail sever(SMTP):smtp.sina.com
Thank you!According to the LabVIEW documentation error code 66 is: "The network connection was closed by the peer", which is not very helpful. There could be a number of reasons why this happens. Could also be that the server was down. I had trouble connecting to one of the sites you listed. Does the server require authentication? I tried the links you provided, but they're in a foreign language and I can't read them, so I can't tell. If authentication is required, then the SMTP VIs provided with LabVIEW won't work since they don't handle authentication. If the server requires authentication you can try the updated OpenG SMTP VIs that I had posted in this thread.
-
Why do i get an error 63 when i sent a mail use SMTP Email
I used "SMTP Email Send Message.vi" but i have allways the error 63. How can I reslove this error? Ist this a port error? a pop up displayes and shows that i should to change the option under the tool palette-> Server.Vi but Ido not know what i can do?
What SMTP server are you trying to use? Your own? Obviously, it is refusing your connection attempt. The SMTP VIs exclusively use the classic SMTP port (25), but many newer mail servers require different authentication, port, encryption, etc. for security reasons.
Start with this search.
LabVIEW Champion . Do more with less code and in less time . -
How to handle the failed records from the table when using DB Adapter
Hi,
I am reading some records from table using DB Adapter inside my synchronous BPEL process. Say like reading 100 records from table in between after successful reading of 90 records an error occured in 91st record due some various reasons(like DB down, Connection interrupted etc.). Then how to handle this situation, whether i have to read all the records from the begining and is there any option to continue from where it stopped reading.
Can please anybody help me out in the regard?
Thanks in advance
Regards,
Aejazwe had the same requirement some time ago and had two option:
1. ask the R/3 development team add a deletion indicator in the table (and thus not actually deleting the record). this deletion indicator could then be used like for any other standard datasource
this option was however refused, due to huge data volume after a while
2. at the end of the load we copied the ZTABLE1 to ZTABLE2. then in the begin of the load (day after) we compare the data of table1 to table2. entries available in table2 but not in table1 are deleted, and we put a 'D'. in deletion indicator; as we only keep the deleted entries for one day, the volume of the new table is acceptable.
M. -
Can someone help me send mail using SMTP server?
I am having the most frustrating problem with SMTP outgoing email account. I use GoDaddy's Webmail (smtp.secureserver.net) and I receive all my emails through Apple Mail but I cannot send any. I haven't been able to for about two weeks now, aside from 3 or 4 fleeting windows of time when I could. Almost all of the time I try to send my emails, an error message says my outgoing account is offline. I've been on the phone with GoDaddy's tech support three times this week and did everything we could think of, which include these steps:
-Force Quit Apple Mail --> Restart Computer
-Change Default Ports to a specific one and uncheck "Use Secure Sockets Layer (SSL)"
-Check "Use only this server"
-Delete account completely from Apple Mail and re-load (which I had to go into Time Machine to recover messages, and lots a bunch in the process ugh!)
Nothing works! I depend on this email for my business, and I rely heavily on Apple Mail for this account. All of my other email accounts that I pull through Mail work fine, but of course they are not SMTP outgoing. Please help...I feel like I've tried everything and nothing works permanently.At this point there are 2 possible causes to your problem:
Apple Mail
Connectivity between you and the SMTP server
I can't help with (1) as I use Thunderbird as my mail client (the biggest advantage being I can take my mail files and move between different versions of Mac OS X). If you suspect that your problem is due to Apple Mail, then using another email client to send a test message will prove the point. If it works, then the problem lies with Apple Mail and somebody else will have to chip in. If it still fails, then there may be connectivity issue between you and the mail server.
If you google "telnet smtp test" (without the quotes), you will find many articles showing you how to test an SMTP connection using telnet. Don't be put off by the fact that many of the articles assume you are running Windows. The only Mac bit you need to know is that telnet is a command line utility accessed via Terminal. The rest is generic.
Telnet will allow you to interact with the mail server a line at a time and show you exactly what and where the problem is. If you get an unexpected response from the server, go back to GoDaddy and show them the output. If you don't get any response at all (i.e. "telnet smtpout.secureserver.net 25" just hangs), then take it up with your ISP as you are simply not getting through to the server.
Good luck. -
i'm new to java mail api
i'm using a machine which is in a network under a proxy server and a fire wall.our network has a smtp server.
i tried to send a amil using a smtp server.
my codes are
package mailtest;
import java.util.Properties;
import javax.mail.Session;
import javax.mail.internet.MimeMessage;
import javax.mail.internet.InternetAddress;
import javax.mail.MessagingException;
import java.io.*;
import javax.mail.Message;
import javax.mail.Transport;
public class FirstMail {
String mailServer;
String host;
public FirstMail() {
//global
mailServer="mail.smtp.host";
host="mail.informatics.lk";
// Get system properties
Properties myProperties=new Properties() ;
// Setup mail server
myProperties.put(mailServer,host) ;
myProperties.put("mail.smtp.auth", "true");
// Get session
Session myMailSession;
myMailSession=Session.getInstance(myProperties,null);
//myMailSession.setDebug(true);
// Define message
MimeMessage message=new MimeMessage(myMailSession);
// Set the from address
//try {
try {
message.setFrom(new InternetAddress("[email protected]","CHANAKA ARUNA"));
catch (UnsupportedEncodingException ex1) {
System.out.println("CAN NOT SEND FROM");
catch (MessagingException ex1) {
System.out.println("CAN NOT SEND FROM");
// Set the to address
try {
message.addRecipient(Message.RecipientType.TO, new InternetAddress("[email protected]"));
catch (MessagingException ex) {
System.out.println("CAN NOT SEND TO");
// Set the subject
try {
message.setSubject("RE:$$$$");
catch (MessagingException ex2) {
System.out.println("WRONG SUBJECT");
// Set the content
try {
message.setText("***chanaka***");
catch (MessagingException ex3) {
System.out.println("WRONG MESSAGE");
// Send message
try {
Transport.send(message);
System.out.println("MESSAGE SENT");
catch (MessagingException ex4) {
System.out.println("UNABLE TO SEND");
public static void main(String[] args) {
FirstMail firstMail1 = new FirstMail();
it was not work, but when i use the ip address of smtp server instead of mail.informatics.lk at
host="mail.informatics.lk";
it worked properly and i could get a mail to my yahoo address.
but i have seen some have used host name like
host="smtp.snet.yahoo.com";
how can i do it using yahoo smtp server.
also i want to know whethr i can use that our smtp server from a computer outside of the net work.
pls help me
txs lot.Almost certainly, if you are behind a proxy server it will only be a proxy for HTTP traffic, and you will not be able to communicate with an SMTP server outside your network. But you have your own SMTP server so why would you want to?
If you have a proxy server and an SMTP server then there will be people responsible for supporting them. Talk to those people and ask them to give you the basic explanation of networking that you need. -
After installing oracle getting Microsoft "Send Error Report" & crashes app
After I installed Oracle 8i on windows XP, I am getting this error very frequently. As soon as I boot the computer I get the pop-up "Send Error Report" 4-5 times. Also I got this while using Client & Profits, MS Power Point and lots of other application. I get this pop-up and the application crashes. This is strange.
Has anybody faced this also? Can anybody help me with this? Is it because Oracle overwrites some of Microsoft's JVM and other things..
Plese Help!!!What edition you are running? PO 8i (8.1.7) had some issues with XP. Check for your edition's certification wrt Windows XP. 9i is certified with XP
-
BPM scenario:single sender message type and multiple receiver message types
Hi,
I am doing a scenario in which i have a single file which may contain different record types say type A,B,C.
I want to separate all records of type A, all records of type B, also all records of type C into different files.
so i will have 3 files of type record A,B,C in destination.
I am using File adapter on both sides.
I think one way may be using ccBPM.Can you please inform me how to achieve it using BPM.
If there is any other way Please mention.You can use multimapping (with or without BPM)
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible ....without BPM
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure ....with BPM...is it that you will always get three output files? -
in an attempt to transfer FSMO roles to the 2012r2 DC the first thing I ran was dcdiag /e /c /v and after correcting some minor errors, I came upon this one in the DNS portion where a SRV record is missing and I have no idea how to fix/remove this. there's
only two DCs, 200.5 and 200.6 where the former is a Hyper-V VM running 2012r2 and the latter is a physical 2003r2 machine. I was able to successfully raise the levels to 2003 and join the 2012r2 DC. this missing SRV record does not look fatal and only warrants
a warning from dcdiag, however I would like to fix this so there's no trouble down the road. I've tried ipconfig /registerdns, but no dice. here is the message I'm concerned about:
Error:
Missing SRV record at DNS server 192.168.200.5:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
the bottom portion of the DNS section that contains this message is in the RReg section and is as follows:
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone cmedia.local
Test record dcdiag-test-record deleted successfully in zone cmedia.local
TEST: Records registration (RReg)
Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
Matching CNAME record found at DNS server 192.168.200.5:
a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
CM-DC1-HV-NYC01.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.5:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Matching CNAME record found at DNS server 192.168.200.6:
a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
CM-DC1-HV-NYC01.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.6:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Warning: Record Registrations not found in some network adaptersHi Ace Fekay, thank you for your help. I hope you're still with me despite my lack of responding. I needed time to move the VPN server from the DC to a separate VM and then following your instructions to disable WINS Proxy and IP routing. Some of the delay
was when I had to restart the 2003r2 server after disabling those two items since that cause DNS queries to the Internet to go unresolved with only the 2012r2 server. That's been corrected, but running dcdiag /c /e /v still gives some DNS problems. Here's
the latest run of that...
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
Starting test: DNS
See DNS test in enterprise tests section for results
......................... CM-DC-NY01 passed test DNS
See DNS test in enterprise tests section for results
......................... CM-DC1-NY01 passed test DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : cmedia
Starting test: CheckSDRefDom
......................... cmedia passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... cmedia passed test CrossRefValidation
Running enterprise tests on : cmedia.local
Starting test: DNS
Test results for domain controllers:
DC: cm-dc-NY01.cmedia.local
Domain: cmedia.local
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS Microsoft(R) Windows(R) Server 2003, Standard Edition (Service Pack level: 2.0) is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000001] HP NC373i Multifunction Gigabit Server Adapter:
MAC address is 00:00:00:00:00:00
IP Address is static
IP address: 192.168.200.6
DNS servers:
192.168.200.6 (cm-dc-NY01.cmedia.local.) [Valid]
192.168.200.5 (CM-DC1-NY01) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders are not configured on this DNS server
Root hint Information:
Name: a.root-servers.net. IP: 198.41.0.4 [Valid]
Name: a.root-servers.net. IP: 2001:503:ba3e::2:30 [Invalid (unreachable)]
Name: b.root-servers.net. IP: 192.228.79.201 [Valid]
Name: b.root-servers.net. IP: 2001:500:84::b [Invalid (unreachable)]
Name: c.root-servers.net. IP: 192.33.4.12 [Valid]
Name: c.root-servers.net. IP: 2001:500:2::c [Invalid (unreachable)]
Name: d.root-servers.net. IP: 199.7.91.13 [Valid]
Name: d.root-servers.net. IP: 2001:500:2d::d [Invalid (unreachable)]
Name: e.root-servers.net. IP: 192.203.230.10 [Valid]
Name: f.root-servers.net. IP: 192.5.5.241 [Valid]
Name: g.root-servers.net. IP: 192.112.36.4 [Valid]
Name: h.root-servers.net. IP: 128.63.2.53 [Valid]
Name: h.root-servers.net. IP: 2001:500:1::803f:235 [Invalid (unreachable)]
Name: i.root-servers.net. IP: 192.36.148.17 [Valid]
Name: j.root-servers.net. IP: 192.58.128.30 [Valid]
Name: j.root-servers.net. IP: 2001:503:c27::2:30 [Invalid (unreachable)]
Name: k.root-servers.net. IP: 193.0.14.129 [Valid]
Name: k.root-servers.net. IP: 2001:7fd::1 [Invalid (unreachable)]
Name: l.root-servers.net. IP: 198.32.64.12 [Invalid (unreachable)]
Name: l.root-servers.net. IP: 199.7.83.42 [Valid]
Name: m.root-servers.net. IP: 202.12.27.33 [Valid]
TEST: Delegations (Del)
Delegation information for the zone: cmedia.local.
Delegated domain name: _msdcs.cmedia.local.
DNS server: cm-dc-NY01.cmedia.local. IP:192.168.200.6 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone cmedia.local
Test record dcdiag-test-record deleted successfully in zone cmedia.local
TEST: Records registration (RReg)
Network Adapter [00000001] HP NC373i Multifunction Gigabit Server Adapter:
Matching CNAME record found at DNS server 192.168.200.6:
406b42db-de80-4d11-bc18-c68074007a76._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
cm-dc-NY01.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.6:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.pdc._msdcs.cmedia.local
Matching CNAME record found at DNS server 192.168.200.5:
406b42db-de80-4d11-bc18-c68074007a76._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
cm-dc-NY01.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.5:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.pdc._msdcs.cmedia.local
Warning: Record Registrations not found in some network adapters
DC: CM-DC1-NY01.cmedia.local
Domain: cmedia.local
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS Microsoft Windows Server 2012 Standard (Service Pack level: 0.0) is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter [00000010] Microsoft Hyper-V Network Adapter:
MAC address is 00:00:00:00:00:00
IP Address is static
IP address: 192.168.200.5, 0000::0000:0000:0000:0000
DNS servers:
192.168.200.5 (CM-DC1-NY01) [Valid]
192.168.200.6 (cm-dc-NY01.cmedia.local.) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders are not configured on this DNS server
Root hint Information:
Name: a.root-servers.net. IP: 198.41.0.4 [Valid]
Name: a.root-servers.net. IP: 2001:503:ba3e::2:30 [Invalid (unreachable)]
Name: b.root-servers.net. IP: 128.9.0.107 [Invalid (unreachable)]
Name: b.root-servers.net. IP: 192.228.79.201 [Valid]
Name: b.root-servers.net. IP: 2001:500:84::b [Invalid (unreachable)]
Name: c.root-servers.net. IP: 192.33.4.12 [Valid]
Name: c.root-servers.net. IP: 2001:500:2::c [Invalid (unreachable)]
Name: d.root-servers.net. IP: 128.8.10.90 [Invalid (unreachable)]
Name: d.root-servers.net. IP: 199.7.91.13 [Valid]
Name: d.root-servers.net. IP: 2001:500:2d::d [Invalid (unreachable)]
Name: e.root-servers.net. IP: 192.203.230.10 [Valid]
Name: f.root-servers.net. IP: 192.5.5.241 [Valid]
Name: f.root-servers.net. IP: 2001:500:2f::f [Invalid (unreachable)]
Name: g.root-servers.net. IP: 192.112.36.4 [Valid]
Name: h.root-servers.net. IP: 128.63.2.53 [Valid]
Name: h.root-servers.net. IP: 2001:500:1::803f:235 [Invalid (unreachable)]
Name: i.root-servers.net. IP: 192.36.148.17 [Valid]
Name: i.root-servers.net. IP: 2001:7fe::53 [Invalid (unreachable)]
Name: j.root-servers.net. IP: 192.58.128.30 [Valid]
Name: j.root-servers.net. IP: 2001:503:c27::2:30 [Invalid (unreachable)]
Name: k.root-servers.net. IP: 193.0.14.129 [Valid]
Name: k.root-servers.net. IP: 2001:7fd::1 [Invalid (unreachable)]
Name: l.root-servers.net. IP: 198.32.64.12 [Invalid (unreachable)]
Name: l.root-servers.net. IP: 199.7.83.42 [Valid]
Name: l.root-servers.net. IP: 2001:500:3::42 [Invalid (unreachable)]
Name: m.root-servers.net. IP: 2001:dc3::35 [Invalid (unreachable)]
Name: m.root-servers.net. IP: 202.12.27.33 [Valid]
TEST: Delegations (Del)
Delegation information for the zone: cmedia.local.
Delegated domain name: _msdcs.cmedia.local.
DNS server: cm-dc-NY01.cmedia.local. IP:192.168.200.6 [Valid]
TEST: Dynamic update (Dyn)
Test record dcdiag-test-record added successfully in zone cmedia.local
Test record dcdiag-test-record deleted successfully in zone cmedia.local
TEST: Records registration (RReg)
Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
Matching CNAME record found at DNS server 192.168.200.5:
a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
CM-DC1-NY01.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.5:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.5:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.5:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Matching CNAME record found at DNS server 192.168.200.6:
a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
CM-DC1-NY01.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.cmedia.local
Error:
Missing SRV record at DNS server 192.168.200.6:
_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
[Error details: 9003 (Type: Win32 - Description: DNS name does not exist.)]
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._udp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kpasswd._tcp.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_kerberos._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.gc._msdcs.cmedia.local
Matching A record found at DNS server 192.168.200.6:
gc._msdcs.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_gc._tcp.Default-First-Site-Name._sites.cmedia.local
Matching SRV record found at DNS server 192.168.200.6:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.cmedia.local
Warning: Record Registrations not found in some network adapters
Summary of test results for DNS servers used by the above domain controllers:
DNS server: 198.32.64.12 (l.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 198.32.64.12 [Err
or details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:500:1::803f:235 (h.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:1::803f:235 [Error details: 1460 (Type: Win32 - Description: This operation ret
urned because the timeout period expired.)]
DNS server: 2001:500:2::c (c.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:2::c [Error details: 1460 (Type: Win32 - Description: This operation returned b
ecause the timeout period expired.)]
DNS server: 2001:500:2d::d (d.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:2d::d [Error details: 1460 (Type: Win32 - Description: This operation returned
because the timeout period expired.)]
DNS server: 2001:500:84::b (b.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:84::b [Error details: 1460 (Type: Win32 - Description: This operation returned
because the timeout period expired.)]
DNS server: 2001:503:ba3e::2:30 (a.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:503:ba3e::2:30 [Error details: 1460 (Type: Win32 - Description: This operation retu
rned because the timeout period expired.)]
DNS server: 2001:503:c27::2:30 (j.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:503:c27::2:30 [Error details: 1460 (Type: Win32 - Description: This operation retur
ned because the timeout period expired.)]
DNS server: 2001:7fd::1 (k.root-servers.net.)
2 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:7fd::1 [Error details: 1460 (Type: Win32 - Description: This operation returned bec
ause the timeout period expired.)]
DNS server: 128.8.10.90 (d.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 128.8.10.90 [Erro
r details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 128.9.0.107 (b.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DNS server 128.9.0.107 [Erro
r details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:500:2f::f (f.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:2f::f [Error details: 1460 (Type: Win32 - Description: This operation returned
because the timeout period expired.)]
DNS server: 2001:500:3::42 (l.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:500:3::42 [Error details: 1460 (Type: Win32 - Description: This operation returned
because the timeout period expired.)]
DNS server: 2001:7fe::53 (i.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:7fe::53 [Error details: 1460 (Type: Win32 - Description: This operation returned be
cause the timeout period expired.)]
DNS server: 2001:dc3::35 (m.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed
on the DNS server 2001:dc3::35 [Error details: 1460 (Type: Win32 - Description: This operation returned be
cause the timeout period expired.)]
DNS server: 128.63.2.53 (h.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.112.36.4 (g.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.168.200.5 (CM-DC1-NY01)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
DNS server: 192.168.200.6 (cm-dc-NY01.cmedia.local.)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
DNS delegation for the domain _msdcs.cmedia.local. is operational on IP 192.168.200.6
DNS server: 192.203.230.10 (e.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.228.79.201 (b.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.33.4.12 (c.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.36.148.17 (i.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.5.5.241 (f.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.58.128.30 (j.root-servers.net.)
All tests passed on this DNS server
DNS server: 193.0.14.129 (k.root-servers.net.)
All tests passed on this DNS server
DNS server: 198.41.0.4 (a.root-servers.net.)
All tests passed on this DNS server
DNS server: 199.7.83.42 (l.root-servers.net.)
All tests passed on this DNS server
DNS server: 199.7.91.13 (d.root-servers.net.)
All tests passed on this DNS server
DNS server: 202.12.27.33 (m.root-servers.net.)
All tests passed on this DNS server
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: cmedia.local
cm-dc-NY01 PASS PASS PASS PASS PASS WARN n/a
CM-DC1-NY01 PASS PASS PASS PASS PASS WARN n/a
......................... cmedia.local passed test DNS
Starting test: LocatorCheck
GC Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
PDC Name: \\cm-dc-NY01.cmedia.local
Locator Flags: 0xe00003fd
Time Server Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
Preferred Time Server Name: \\cm-dc-NY01.cmedia.local
Locator Flags: 0xe00003fd
KDC Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
......................... cmedia.local passed test LocatorCheck
Starting test: FsmoCheck
GC Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
PDC Name: \\cm-dc-NY01.cmedia.local
Locator Flags: 0xe00003fd
Time Server Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
Preferred Time Server Name: \\cm-dc-NY01.cmedia.local
Locator Flags: 0xe00003fd
KDC Name: \\CM-DC1-NY01.cmedia.local
Locator Flags: 0xe00071fc
......................... cmedia.local passed test FsmoCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope provided by the command line arguments
provided.
......................... cmedia.local passed test Intersite -
Creative Cloud Installation Failed Download Error - Error Type -7 and Error Code - 401
I subscribed to Creative Cloud in December 2012 and have been trying to install the applications, but the "Installation Failed" through the Adobe Application Manager. (see screenshot)
Here is a line from my log file:
01/08/13 11:08:48:346 | [WARN] | | ASU | PDApp | DownloadError | | | 6120 | Download Error has come with GDE Error type - -7 and error code - 401
I tried searching for the same error code in the "knowledge base" but couldn't locate any.
I am on a Windows 7 (x64) machine. I also have CS5.5 installed.
Anyone have this problem? Please help or point me in the right direction if you can. Thanks!Thanks Romsinha,
I tried the above steps, with no luck. I have admin rights on both laptop and desktop I'm trying to install to. I have updated my AAM on both machines with no issue (when using the direct link above). But when I click the 'Try' link to download an application, it shows the scrolling status bar for a few seconds, then "Installation Failed" 'Download error. Press Retry to try again or contact customer support. (-7)' Retry only produces same results.
Both machines are running Win 7 Pro - SP1 64bit
(laptop - 16 GB RAM & Core i7-2760QM 2.40 GHz processor)
(desktop - 8 GB RAM & Xeon W3520 2.67GHz processor)
I am running in a corporate setting with I'm sure all sorts of Firewall protection etc...
I'm planning on asking for a CC membership, but wanted to check out the new features first....
Thanks! -
When I do initial set up with creative cloud set up it wont run a send error message "installer failed to initialize" comes up. Why and how can I get passed this?
Error "Installer Failed to Initialize" | Install desktop application | Windows
-
Send error messages in DatabaseMail when SQL Job fails/succeeds
Hi ,
I have setup a profile and account for sending mail using DatabaseMail. I have a SQL JOB. If the job fails, I receive an Email.
Till this point, everything works fine. This is what the email looks like :
JOB RUN: 'GenerateJVForLabourAndOverheads_R11Testing' was run on 20-12-2012 at 10:10:50
DURATION: 0 hours, 0 minutes, 0 seconds
STATUS: Failed
MESSAGES: The job failed. The Job was invoked by Schedule 58 (Execute SP). The last step to run was step 1 (Execute SP).
Now what I want is, if the job fails for any reason, that error message should appear in the email message body.
for example, FK_Constraint error , Conversion errors or any error that caused my sql job to fail.
Is this possible ?
Any help appreciated,
Thanks,
Lok..This is one way to do, assuming your job has 2 steps and step 1 does the main part.
So,in your step 2 of the job, you can add the below code and
declare @body1 varchar(8000)
select top 1 @body1 = [Message] from msdb.dbo.sysjobhistory A INNER JOIN msdb.dbo.sysjobs B ON B.Job_id = A.Job_id
where B.Name = <<JobNaMe>> and A.step_id =1 order by instance_id desc
EXECUTE msdb.dbo.sp_send_dbmail @profile_name = <<YourMail profile>>
,@recipients = <<RecipeintEmail>>,@subject =<<Your subject>>,@body = @body1
I guess, you can also log the job step output to an outputfile and have it sent as an attachment to your mail... this might help if you have many steps in one job....
HTH!!
Please mark as 'Answer', if the solution solves your problem.
Maybe you are looking for
-
HT204266 How do i cancel my movie purchased when it stil downloading?
Hi there...if anyone could help me and tell me how to cancel my purchased for movie when it still downloading....now i paused the download..the bill only charged when the movie is fully download isn't? Can someone tell me what to do...
-
I am making a web part in VS 2010 for SharePoint 2010. The web part uses Report Viewer control. The files I have referenced in my project with "Copy Local = True" option are: Microsoft.ReportViewer.Common.dll Microsoft.ReportViewer.WebForms.dll Bot
-
Deploying war file on iplanet application server 6.5
Hi , We are trying to deploy WebObjects application on Iplanet Application server server 6.5. Steps we tried for deployment : 1) War file generated by WebObjects. 2) Started IPlanet Application server. 3) Opened the War file in the deployment tool. 4
-
What is this display XML format
If we go to ID.. in communication channel--> go to menu-> communication channel---> Display XML format what is that used for..
-
After dumping out a couple of hundred photos from my library iPhoto would not quit, I forced quit and now I have a couple of hundred "ghost" photos, the photo meta information without the photo. If I try to delete the "ghost" photos and empty iPhoto