SMICM error while sending mail using SMTP server
Hi All,
We are not able send mails using SMTP server.
We have made every settings necessary in SCOT, SO16 , SMTP service is activated, default domain is maintained etc
Only things which seems to be wrong is in SMICM trace file.
[Thr 13] *** ERROR => NiBufIConnect: non-buffered connect pending after 5000ms (hdl 29;10.26.24.44:1090) [nibuf.cpp 4608]
[Thr 13] *** WARNING => Connection request from (0/1/0) to host: 10.26.24.44, service: 1090 failed (NIECONN_REFUSED)
[icxxconn_mt.c 2321]
This error is getting repeated in it.
BUt I am not sure why it it trying to hit 10.26.24.44, as we dont have any server by this ip. The ip is only not resolvable from the server.
1 more thing, at OS level, following parameter is maintained in profile :
icm/server_port_1 = PROT=SMTP,PORT=25000,TIMEOUT=180
But in SCOT, under SMTP node PORT is given as 25.
Kindly let me know what going wrong here?
Thanks
also getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
Similar Messages
-
Authentication Error while Sending Email from SMTP server.
Authentication Error while Sending Email from SMTP server. Can receive emails but cannot send emails from this account.
no email account was setup on the phone unless it was issued by your company.
gmail is required but no server address ports to enter.
my gmail account was setup before i took delivery of the phone but could have been done when phone was activated.
i added cox pop3 email and had to manually enter both pop3 and smtp servers with both boxes checked on both servers.
i doubt if it's a verizon issue. -
Error in sending mail using ssl server
Hi All
Please help in resolving the below issue i am getting the following error while sending mail. I am using the IMAP server and it is ssl configured.
DEBUG: setDebug: JavaMail version 1.4ea
DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtps,com.sun.mail.smtp.SMTPSSLTransport,Sun Microsystems, Inc]
DEBUG SMTP: useEhlo true, useAuth false
DEBUG SMTP: trying to connect to host "mail.test.com", port 465, isSSL true
DEBUG SMTP: exception reading response: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
javax.mail.MessagingException: Exception reading response;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
at com.sun.mail.smtp.SMTPTransport.readServerResponse(SMTPTransport.java:1462)
at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:1260)
at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:370)
at javax.mail.Service.connect(Service.java:275)
at com.test.test.JavaMailApp2.main(JavaMailApp2.java:59)
Caused by: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.fatalSE(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(Unknown Source)
at com.sun.mail.util.TraceInputStream.read(TraceInputStream.java:97)
at java.io.BufferedInputStream.fill(Unknown Source)
at java.io.BufferedInputStream.read(Unknown Source)
at com.sun.mail.util.LineInputStream.readLine(LineInputStream.java:75)
at com.sun.mail.smtp.SMTPTransport.readServerResponse(SMTPTransport.java:1440)
... 4 more
Caused by: sun.security.validator.ValidatorException: PKIX path validation failed: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
at sun.security.validator.PKIXValidator.doValidate(Unknown Source)
at sun.security.validator.PKIXValidator.doValidate(Unknown Source)
at sun.security.validator.PKIXValidator.engineValidate(Unknown Source)
at sun.security.validator.Validator.validate(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.validate(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
... 17 more
Caused by: java.security.cert.CertPathValidatorException: subject/issuer name chaining check failed
at sun.security.provider.certpath.PKIXMasterCertPathValidator.validate(Unknown Source)
at sun.security.provider.certpath.PKIXCertPathValidator.doValidate(Unknown Source)
at sun.security.provider.certpath.PKIXCertPathValidator.engineValidate(Unknown Source)
at java.security.cert.CertPathValidator.validate(Unknown Source)
... 24 moreBelow is the source code of the program.
package com.test.test;
import java.security.Security;
import java.util.Properties;
import javax.mail.Authenticator;
import javax.mail.Message;
import javax.mail.MessagingException;
import javax.mail.NoSuchProviderException;
import javax.mail.PasswordAuthentication;
import javax.mail.Session;
import javax.mail.Transport;
import javax.mail.internet.AddressException;
import javax.mail.internet.InternetAddress;
import javax.mail.internet.MimeMessage;
public class JavaMailApp {
public static void main( String[] args )
String d_email = "[email protected]";
String d_uname = "ots.support";
String d_password = "password";
String d_host = "mail.test.com";
String d_port = "465"; //465,587
String m_to = "[email protected]";
String m_subject = "Testing";
String m_text = "Hey, this is the testing email.";
Properties props = new Properties();
props.put("mail.smtp.user", d_email);
props.put("mail.smtp.host", d_host);
props.put("mail.smtp.port", d_port);
props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.debug", "true");
props.put("mail.smtp.auth", "true");
props.put("mail.smtp.socketFactory.port", d_port);
props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
props.put("mail.smtp.socketFactory.fallback", "false");
SMTPAuthenticator auth = new SMTPAuthenticator();
Session session = Session.getInstance(props, auth);
session.setDebug(true);
MimeMessage msg = new MimeMessage(session);
try {
msg.setText(m_text);
msg.setSubject(m_subject);
msg.setFrom(new InternetAddress(d_email));
msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
Transport transport = session.getTransport("smtps");
transport.connect(d_host, 465, d_uname, d_password);
transport.sendMessage(msg, msg.getAllRecipients());
transport.close();
} catch (MessagingException e) {
// TODO Auto-generated catch block
e.printStackTrace();
public class SMTPAuthenticator extends Authenticator{
public PasswordAuthentication getPasswordAuthentication()
return new PasswordAuthentication("[email protected]", "password");
}I have also added the certificate to my keystore using the following command and still i am facing this issue.
keytool -import -trustcacerts -alias root -file mail_test_com.crt -keystore keystore.jks
Add to fierof2's Reputationthis is where i created the keystore.jks file
I navigated to the location C:\Program Files\Java\jdk1.6.0_13\bin in command prompt and typed the following command to create the keystore
keytool -import -trustcacerts -alias root -file mail_test_com.crt -keystore keystore.jksI was asked to set the password for keystore and then i was asked the question "Trust this certificate? [no]:" for which i gave yes.
If this is not the right place to create the keystore.jks can you please tell me what is correct location to create the keystore file. -
Error while sending mail using script task in ssis 2008
Hi,
i am trying to send mail using ssis 2008 script task.for my requirement i am not able to use send mail task.
code i have used is
declared read only variables system::packagename
Dim PACKAGE As String
PACKAGE = Dts.Variables("System::PackageName").Value.ToString()
Dim myHtmlMessage As MailMessage
Dim mySmtpClient As SmtpClient
myHtmlMessage = New MailMessage("[email protected]", "[email protected]", "PACKAGE STATUS", PACKAGE + "WAS FAILED")
mySmtpClient = New SmtpClient("smtp.gmail.com")
mySmtpClient.Credentials = New NetworkCredential("[email protected]", "mypassword")
mySmtpClient.EnableSsl = True
mySmtpClient.Port = 587
mySmtpClient.Send(myHtmlMessage)
error i am getting is
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
can any one tell me where i am going wrongalso getting error as follows
Error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.Mail.SmtpException: The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1
Authentication Required. Learn more at
at System.Net.Mail.MailCommand.CheckResponse(SmtpStatusCode statusCode, String response)
at System.Net.Mail.MailCommand.Send(SmtpConnection conn, Byte[] command, String from)
at System.Net.Mail.SmtpTransport.SendMail(MailAddress sender, MailAddressCollection recipients, String deliveryNotify, SmtpFailedRecipientException& exception)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at ST_c121e07caaa94c21bb1355d4f753112f.vbproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript() -
Error while sending mail through SMTP
Hi,
We are getting the following error while trying to send mail through SMTP.
'554 ERROR_MESSAGE_STATE: SMTP_NO_HANDLER( host:1-,subrc:0001)'
Please advice,
Regards,
SamHi All,
Configured SMTP as per the note 455140,i can able to send mails from SAP to the out side world,
mails in SAP.When i tried the test to check whether the SAP system is correctly set up to receive e-mails as per the note 607108, iam getting a connection closed message as below.
afgdev:pgdadm> telnet afgdev 2500
Trying...
Connected to afgdev.
Escape character is '^]'.
220 afgdev.abc.ae SAP 6.40(52) ESMTP service ready
helo afgdev
250 afgdev.abc.ae
mail from:<[email protected]>
250 Ok
rcpt to:<[email protected]>
250 Ok
data
354 Enter mail, end with "."
Hello,This is a test.
Connection closed.
afgdev:pgdadm>
rgds
Sam -
Can someone help me send mail using SMTP server?
I am having the most frustrating problem with SMTP outgoing email account. I use GoDaddy's Webmail (smtp.secureserver.net) and I receive all my emails through Apple Mail but I cannot send any. I haven't been able to for about two weeks now, aside from 3 or 4 fleeting windows of time when I could. Almost all of the time I try to send my emails, an error message says my outgoing account is offline. I've been on the phone with GoDaddy's tech support three times this week and did everything we could think of, which include these steps:
-Force Quit Apple Mail --> Restart Computer
-Change Default Ports to a specific one and uncheck "Use Secure Sockets Layer (SSL)"
-Check "Use only this server"
-Delete account completely from Apple Mail and re-load (which I had to go into Time Machine to recover messages, and lots a bunch in the process ugh!)
Nothing works! I depend on this email for my business, and I rely heavily on Apple Mail for this account. All of my other email accounts that I pull through Mail work fine, but of course they are not SMTP outgoing. Please help...I feel like I've tried everything and nothing works permanently.At this point there are 2 possible causes to your problem:
Apple Mail
Connectivity between you and the SMTP server
I can't help with (1) as I use Thunderbird as my mail client (the biggest advantage being I can take my mail files and move between different versions of Mac OS X). If you suspect that your problem is due to Apple Mail, then using another email client to send a test message will prove the point. If it works, then the problem lies with Apple Mail and somebody else will have to chip in. If it still fails, then there may be connectivity issue between you and the mail server.
If you google "telnet smtp test" (without the quotes), you will find many articles showing you how to test an SMTP connection using telnet. Don't be put off by the fact that many of the articles assume you are running Windows. The only Mac bit you need to know is that telnet is a command line utility accessed via Terminal. The rest is generic.
Telnet will allow you to interact with the mail server a line at a time and show you exactly what and where the problem is. If you get an unexpected response from the server, go back to GoDaddy and show them the output. If you don't get any response at all (i.e. "telnet smtpout.secureserver.net 25" just hangs), then take it up with your ISP as you are simply not getting through to the server.
Good luck. -
Having been on Thunderbird for some years I have suddenly got the following message when trying to send mail.
An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later..
I have checked the SMTP server settings in tools, account settings and they are as they have always been. Is there something I have missed?Sending through web mail is totally irrelevant to using an SMTP server. The message even says it is from the server. Why do you think this is a Thunderbird problem.
The provider has put in place measures to keep people from spamming other email recipients using thier SMTP server. You have seen the result of those measures. -
Urgent:-REP-50152: Error while sending mail
hi
i am using reports10g. i have called a report from a form and destype=mail.
i have already mention the smtp server name in conf. file but still receiving this error
REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
thanksYour smtp server forbids relaying, which is very common. Often a smtp server is configured to send only mails within the same domain without authentication. Otherwise, you need a username and password for the smtp server. I'm not sure if you can configure Reports to send mail through an authenticated server.
-
Error while sending mail from SAP system
Hi all,
I configured SAP connect in ecc6.0 ehp7 while sending mail using tx sost i am error
Message cannot be transferred to node SMTP due to connection error (final) , below is the icm log.
ERROR => IcmPlAllocBuf: MpiGetOutbuf failed (rc = 14(MPI_ESTALE: outdated MPI handle)) [icxxplugin.c 1222]
ERROR => SMTP SmtpClientClose: alloc failed, rc = -3 [smtp_plg.c 3738]
ERROR => IcmBufFree(id=0/32): MpiFreeBuf failed (rc=14), MPI_ESTALE: outdated MPI handle [icxxplugin.c 165
ERROR => IcmConnClose: PlugInStopConn failed (rc=701) [icxxconn.c 3433]
can any one please help on this
Thanks,
Narendar.Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu -
Error while sending mail from SAP
Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
A RAISE statement in the program "SA
condition "FOLDER_NOT_EXIST".
Since the exception was not intercep
program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
HasanHello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu -
SOAP Receiver- Error While Sending Message: 500 Internal Server Error
Hello,
Our scenario: IDoc to SOAP
I have added a third party system in the SLD and have used the same in my ID configuration.
An idoc will be triggered from R/3, which will received in PI, PI will transform the IDoc into SOAP message for the third party system.
I have tested the scenario in ID from Interface Determination and its successful.
But when i try to try to test it from RWB, using Test Message in Adapter Engine, I get an error,
"Error while sending message:500 Internal server error"
If we test it using a testing software like SOAP UI, it works fine but from PI we get the error mentioned above.
Regards,
AbhishekHello,
Since the IDOC adapter resides on the ABAP stack, you can use this URL instead (it will be sent to the integration engine as Venkata suggested)
http://host:port/sap/xi/engine?type=entry
Also check your firewall settings from PI to the third-party system.
Hope this helps,
Mark
Edited by: Mark Dihiansan on Feb 7, 2012 11:48 AM -
" Error while sending message: 500 Internal Server Error" RNIF Adapter
Hi,
I have configured B2B integration as Sender : RNIF adapter & Receiver: XI Adapter.
I am able to test the configuration successfully in ESR and ID. But, whille testing with RWB using same test data, i am getting the following error:
Error while sending message: 500 Internal Server Errot.
Could you anybody help me, what could be the reason? Even i am not getting any error messages in SXMB_MONI.
Thanks
LaxmanHope this helps..
-Is the 500 internal SErver Error in RWB is only for this issue and the message is successfully processed in SXMB_MONI?
Could be the PI Service User :PIAFUSER(Adapter framework user) login crendential issue or run out time error.
Try taking the payload from sxmb_moni and enter it in RWB > Adater engine> Test Message Tab > give proper sender interface information , enter payload and try sending message. check what is behaviour -
Terminated with error: REP-50152:Error while sending mail
Hi
Gets this error while sending report mails to external email id's
Terminated with error: REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
Any setting to be done in report config file?
thanks
MGIt should be like this
<pluginParam name="mailServer">%MAILSERVER_NAME%</pluginParam>
Specify the name of your mail server in the place of %MAILSERVER_NAME% above
Also make sure that this is not commented out.
Thanks, -
Imp: Error while sending message: 500 Internal Server Error
Hi all
while testing my scenarios- by sending the message through component monitoring in RWB I get the following error in Integration Server
<b>"Error while sending message: 500 Internal Server Error "</b>
It seems that integration server is not picking up the messages.
Can anyone help me on this?
thanks
AbhishekHi Abhishek,
Check whether the integration url is pointing to correct one something like http://host url:http port/sap/xi/engine?type=entry.
Please do refer the below blog:
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Prasanthi. -
Sending mail using smtps protocol
Could anyone post a piece of code to show how to send a message using smtps protocol?
SSLNotes of 1.3.2ea version say that it's possibile, but i tried whithout success....
ThanksHello,
I can send the mail using SMTP with the help of java mail api. But i want to send mail using SMTPS protocol using java. The mail should be encrypted format.
So, my queries are:
1. How to send mail using SMTPS protocol?
2. I want to send the mail as encryption mail. So how to create encrypted mail.?
Thanks in advance.
From
Rajendra.
Maybe you are looking for
-
Drill function implemented on Measure object column in the webi report
Post Author: madan kumar CA Forum: WebIntelligence Reporting Hi, I have a small issue in my project.(Maintenance Project)I created a measure object in the fact table of the existing universe and saved and exported to the repository. (Say Measure obje
-
Add New Field in Asset History Sheet
Hi, Can any one let me known how would we add a field in Asset History Sheet. I want Scrap Value(ANLB-SCHRW) to be added to the Asset History Sheet. I have seen the settings in Asset History Version, I can add a column to it. But I don't know how to
-
Problem in finding GHR.PLL
Hi folks, I am having problem while opening FOrms in my client. So, i copied the mentioned PLL to the forms60_path and i dont find GHR.PLL in my linux server. Only i can see GHR.PLX I think I have to copy GHR.PLL to open template in my client. Can yo
-
HT1338 how to upgrade from mac os x 10.4.11 to 10.5
how to upgrade from mac os x 10.4.11 to 10.5
-
Why is iTunes written in such a counter intuitive, complicated manner Compared to Real Player or Windows Media Player it is far more difficult to use and the commands do not even funtion in many cases. For instance, the instructions for transferring