Send file at JMS without PI, is it possible ?

Hi expert,
in my system there's not PI, is it possible to send file on JMS ? How can I do it ?
tks a lot

It is better write in the system from where you want to send the file.
>Can I solve this problem if I store the file in the sap directories, and JMS come inside sap directory to read the file ?
Do you mean JMS server has to read the file data. No, that is not possible.
JMS server concept is, we have to push/pull data using some JMS client.
Thanks,
- Gujjeti.
Edited by: Praveen Gujjeti on Mar 19, 2009 3:44 PM

Similar Messages

  • Sending files with and without BPM in one Interface.

    Hi All,
    I have to send three files to my receiver system. 2 files of same structure after little mapping need to be merged into single file (Using BPM) and once this is successful the third file needs to be posted without any mapping.
    I have thought of
    1. using two communication channels activated using a UNIX script externally
    2. using two comm channels with a activation time difference, i.e the 3rd file should be polled after some time when the first two files polled, but this is not helpful as if the two files doesnt process properly then 3rd file is not desired.
    Now my question is can we do this scenario using 1 comm. channel with EOIO , masking or anyother option.
    <b>Note: the third file should always be send after the processing of the first two files completes successfully.</b>
    Thanks & Regards.

    1. put two file in source folder and make synch scenario using BPM ,
    2. put third file in some other folder than source folder.
    3. after getting successful synch file responce, in the synch receiver file channel run OS command to put third file from other folder to source folder.
    hows that ???

  • B2B not sending file to JMS

    Need help.
    I polled a file through B2B listening channel and it worked fine.  However, I'm expecting the file to be published in a JMS Queue, which I have configured as a channel in the host company and in the agreement, but it doesn't seem to do anything after the file is consumed in the listening channel.  Am I missing a step here? Where does the file go after it is being consumed in the listening channel?
    Thanks for your help.

    Hi,
    That's good to know!
    I'd be interested in knowing a few more details if you have the time!
    Thanks!
    Cheers
    Tiago

  • Allow wireless PC to access files on my Mac via airport express - possible?

    I currently access the internet wirelessly via an airport express plugged into a netgear router, everything works great.
    I also have a spare pc that i would like to be able to access the net wirelessly - it currently doesnt have a wireless card but i figure if i just get a usb unit it should be able to without too many problems as it should just detect my airport network (hopefully anyway).
    Befor i go get the card tho, i was wondering if there will be a way to allow me to transfer files between the Mac HD and the PC HD - it wouldnt have to be 2-way, just so i could sit at my mac and send files over to the Pc - is this possible, and if so, a little help in how exactly to set it up would be appreciated!
    cheers!!

    using the guide on that page i have managed to
    connect to the Mac from the PC, but i am unable to
    see the folders on my external hard-drive
    You will need to use Sharepoints in order to share the external hard drive.
    http://www.hornware.com/sharepoints/
    iFelix

  • How to Send  message to MQ without using JMS Receiver Adapter

    Hi Frnds,
    Actually i am working one File to JMS scenario,I have to send message to MQ,What are the different ways we can send  message to MQ without using JMS Adapter.
    Regards,
    Raj

    Hi Ramesh,
    Thanks for your replay,could you please eloborate how to integrate that one with XI,and how to use in XI?
    regards,
    raj

  • Sender File Adapter always "Polling interval started" without complete

    Hi,
    I have problem with sender file adapter suddenlty the status from Communication Channel Log monitoring always with polling started without completed.
    4/25/11 11:40:33 AM   Polling interval started. Length: 10.0 seconds
    4/25/11 11:40:23 AM   Polling interval started. Length: 10.0 seconds
    4/25/11 11:40:13 AM   Polling interval started. Length: 10.0 seconds
    4/25/11 11:40:03 AM   Polling interval started. Length: 10.0 seconds
    Normal :
    4/25/11 11:41:50 AM   Polling interval started. Length: 10.0 seconds
    4/25/11 11:41:50 AM   Processing finished successfully
    4/25/11 11:41:50 AM   Processing started
    4/25/11 11:41:40 AM   Polling interval started. Length: 10.0 seconds
    4/25/11 11:41:40 AM   Processing finished successfully
    4/25/11 11:41:40 AM   Processing started
    I have tried to stop and start the channel but still no luck. This problem only happen for this particular communication channel others channel is working fine.
    Please advise other solution before i need to restart the java engine since this in the production environment. The problem is some of the process was delayed because this issue. CC was delayed to pickup the file.
    Thank You in advance.
    FL

    Hi Abhistek,
    Thank you for your correction. It was typo.
    Which assumption is correct ?
    1. All 3 instance running together in the same time ?  or
    2. Either 1 of the instance running once time manage by clustering setting.
    Example :
    15:01:00   ---> A
    15:02:00  -
    > A
    15:03:00  -
    > B
    15:04:00   -
    > B
    Currently :
    15:01:00   -
    > A    
    15:01:00   -
    > B (lock)
    15:02:00  -
    > A
    15:02:00  -
    > B (lock)
    It seems all 3 instance lose control from clustering ?
    Regards
    FL

  • How to send image file through mail without   any attachment

    Plz tell  me how to send image file through mail without any attachment  ( i mean not converting  that image into pdf or any format )  i want to send that text or image  through mail .

    Hi Sandeep,
    I think you can setup the type of email in Shared office Settings in transaction S016.
    There is an option called <Preset document classes>
    You choose this pushbutton to branch to the maintenance screen for the document classes that are directly displayed to users in the Business Workplace for selection when they use the Create function. The name under which the documents are displayed can also be maintained.
    http://help.sap.com/saphelp_nw70/helpdata/en/6c/69c30f418d11d1896e0000e8322d00/content.htm
    Haven't tried it though.
    Regards,
    Siddhesh

  • FCC configuration in Sender File Channel Without any key field name

    Hi Everyone,
    We have below flat file generated from ECC using standard tcode.
    The flat file is fixed length file and first record is header record followed by line items.
    There is no key field name in the file name.
    Can we read the file and convert into xml without any key field name?
    I want to understand if the FCC configuration for above file can be done without key name or not.
    Thanks,
    Vertika

    Hello,
    AFAIK, using FCC i really doubt u can convert file into xml.
    So technically, there are two options either read each line one by one and then do conversions in ur mapping or write a custom module which will read ur input file and convert into xml.
    Configuring Generic Sender File CC Adapter
    Thanks
    Amit Srivastava

  • Verification of recvr file channel  configuration without sending a message

    Hi,
    We need to test the configuration((such as directory, filename etc.,) of a receiver file channel. As we all know, in the case of sender channel, since it will keep polling the directory configured, if there is any incorrect directory, it will be indicated in the run time work bench, EVEN IF THE MESSAGE HAS NOt GONE THROUGH THE SENDER FILE CHANNEL. However in the case of receiver file channels, UNLESS THE MESSAGE GOES THROUGH THE RECEIVER FILE CHANNEL, we won't be able to identify the incorrect directory configuration.
    Thus, please let me know as to how to identify the incorrect directory configuration in the case of RECEIVER FILE CHANNELS, without sending any message through the same.
    I appreciate your early response.
    Regards
    Venkat

    Hi,
    AFAIK you can check whether the channel is Started/ Stopped (in RWB), check whether correct parameters are filled in the CC (by visual inspection)....but unless and until you test the scenario you may not know whether the CC is properly working or not....somethimes there is a case that you are asked to pay for each and every message that is sent using XI...is this your case?....if not then you can go ahead and test it end-to-end as Dharamveer said.....
    If you get the solution (as you need) then dont forget to share with us
    Regards,
    Abhishek.

  • Sender JMS Synchronous communication channel not picking up files from JMS

    Hello,
    One of our Sender JMS synchronous communication channel (used Sync/Async bridge in the module section to make it Synchronous) is not picking up files from JMS system though the channel looks to be active (greeen).
    When I am trying to stop the channel, it is giving error as "1 of 1 administered and selected channels have not been stopped", and after this when I start the cannel again it shows green but not picking up any files.
    if anyone is haivng any solution for this, please reply back.
    Thanks in advance.

    Messages available in JMS system? please check queue's if message were there and it is not picking up then some thing wrong with cc.
    simple solution create new communication channel with same details and try to use the same.

  • Send A file Using JMS

    I want to send a file Using JMS.. and want to have
    These Details in the message that send.
    Receivers IP address & The file
    That mean I want to send a File from one client to another client Using a Queue
    Can Anyone help me to solve this problem
    thanks

    Read the file then use a JMS BytesMessage or TextMessage. Add your own JMS header for the recievers ip and any other info you want to annotate the message with.
    Watch out for character encoding and max file size problems.
    If your client / server are not on the same network you're likely to run into firewall issues.
    Don't kid yourself that this will be a transactional solution.
    Assumes both clients are Java (JMS headers are a pain to read otherwise)

  • Acrobat DC installs "Send File" without asking

    I updated Acrobat and had DC delete and replace Pro XI. It also installed a add-on in MS Outlook called Send File. It did not ask if this was OK.
    Personally I don't like the look of the new program and since you can uninstall and go back a generation I did.
    Adobe, if you want to be Dropbox or Hightail then make a stand-alone. And never modify another non-Adobe application without asking permission.

    Nothing can stop people reusing your material. If it's really worth
    anything, text can be retyped of course, and images can be rescanned,
    or screen captured. You should certainly make this part of your
    contract with end users if it is a concern.
    If you are sending proofs, you can use a lower resolution, but if you
    are sending a final copy you have few options. You can of course set
    document security to block Acrobat (but not every program) from
    copying text or even allowing printing.
    Aandi Inston

  • When I try to send file from Reader as email it is attached without .pdf extension

    Hello,
    When I try to send file from Reader as email it is attached without .pdf extension.
    What could be a cause of this problem?
    TIA.

    Hello I got more info about this strange scenario. This happens when our user want to send a pdf file embedded on www page. Web application uses this control to display pdf files: Winnovative PDF Viewer Controls for ASP.NET and Windows Forms
    It is strange that when I try on my computer I will get file name with pdf extension, but people in different location get it without .pdf extension. I have no idea what happened, and now I am not sure if it is problem with Reader.
    User reports that he uses Adobe Reader version 11.0.0

  • Sender File Adapter  not able to get file via FTP from an external system

    Hi,
    I have a Sender File Adapter using FTP which polls a server every 10 seconds looking for a file ".xml".  The adapter will connect and pick up the waiting file, but sometimes the adapter not able to get file via FTP from an external system. The file is on the server, but despite the polling, the adapter does not pick up it. There is no return error.
    The connect mode is Permanently and the transfer mode is Binary.
    Can you help me?
    Thanks.
    T.

    Hi Teresa,
    does this case appears with a file size higher the others?
    Personally, I do not recommend to have a polling under 1min.
    10s could be too just, if the file is not small and/or if the file server is far (several kilometers) to where the Adapter Engine is, and/or this file server is beside a firewall. Do not forget also that, with previous points, you could have like a conflict, betwen the 1st polling and the 2nd polling, if in less 10s PI adapter has not enough time: to connect to the FTP server (several Km), find the file (perhaps among 100 other files in the directory), go back to the file to Adapter Engine server (several Km again), convert your file to XML message (with a complex Content Conversion), then check the XML structure, and when all that is done, return back to FTP server (several Km), to archive the source file... Well It's my understanding of a FTP exchange with FILE adapter...
    If you really need a 10s polling, that's mean your have a pseudo real time interface. In that case, in my mind file should not be used! but we should use a Web service, JDBC JMS (any exchange without a physical object like a file). For me, it's a non-sens to have a file in that case.
    regards.
    mickael

  • For sending file in  B2B  scenario

    Hello Friends,
    I need to pass a file to my client's business partner...
    I think its a B2B scenario...
    So how to transfer a file my client to  his business parntner.
    Please suggest which adpter to use at receiver side and how to handle the configuration..
    It should be secure and reliable

    hi,
    you have to use FILE ADAPTER but you need to use PARTY when you are using BPM
    check this blogs for reference
    BPM means Business process management
    To deal with Multiple sender and receivers based on the conditions we could use BPM. Its one of the feature of BPM, but its not mandatory to go for BPM for each n every case. Its depends upon scnenario.
    BPM steps are divided into two types:
    1)message steps
    2)flow steps
    message steps are :
    a)send step
    b)receive step
    c)receiver determination step
    d)tranformation step
    flow steps are:
    a)control step
    b)container operation
    c)block step
    d)wait step
    e)fork step
    f)switch step
    g)undefined step
    h)loop step
    Check these
    BPM:
    Walkthrough with BPM - Walk through BPM BPM in XI https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/integrationProcess%28ccBPM%29inXI&
    BPM-1 Walkthrough with BPM
    BPM-2 Reconciliation of Messages in BPM
    BPM-3 RFC Scenario using BPM --Starter Kit
    BPM-4 The specified item was not found.
    Schedule BPM Schedule Your BPM
    Use of Synch - Asynch bridge in ccBPM Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi
    Use of Synch - Asynch bridge in ccBPM https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
    without BPM Sync/Async scenarios without BPM
    without BPM1 Sync/Async communication in JMS adapter without BPM (SP19)
    IDOC BPM IDOCs (Multiple Types) Collection in BPM
    multimapping without BPM /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible---- Multi Map With out BPM
    Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI. Various multi-mappings and Optimizing their Implementation in Integration Processes (BPM) in XI.
    Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure --- Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
    IDOCs (Multiple Types) Collection in BPM (N:1 Mapping )
    reward points if helpfull
    regards
    kummari

Maybe you are looking for