Send Internal Table Vaue to Spool Output

Hi,
i have a requirement. when i execute my program the output should be display in the spool. is there any function module avaliable to pass all internal table values from report program to spool?
give me your hints please.
thanks
john.

Hi John,
You can try this code on a test program
CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
EXPORTING
    i_file_length            = 255
* IMPORTING
*   E_SPOOLID                =
tables
    it_textdata              = gt_output_table
* EXCEPTIONS
*   SPOOL_ERROR              = 1
*   PARAMETERS_INVALID       = 2
*   OTHERS                   = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
You can either hardocde the value of file length or calculate the value of the file length and pass the internal table against parameter it_textdata              .
Hope this helps
CHeers
VJ

Similar Messages

How to Send Internal table to SAP Spool using Function Modules or Methods?

Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
Kiran

This is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
      W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
      P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
      MY_MONTH type T549Q-PABRP,
      STR_MY_MONTH(2) type C,
      MY_YEAR type T549Q-PABRJ,
      STR_MY_YEAR(4) type C,
      CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
      ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
        INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
   CMD like PC408-LTYPE value '/:', "command
   TXT like PC408-LTYPE value 's',   "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
      DOCDATA like SODOCCHGI1,
      OBJTXT like SOLISTI1 occurs 10 with header line,
      OBJPACK like SOPCKLSTI1 occurs 1 with header line,
      RECLIST like SOMLRECI1 occurs 1 with header line,
      OBJHEAD like SOLISTI1 occurs 1 with header line,
      it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
      gd_buffer type string,
      l_no_of_bytes TYPE i,
      l_pdf_spoolid LIKE tsp01-rqident,
      l_jobname     LIKE tbtcjob-jobname.
data: file_length type int4,
      spool_id     type rspoid,
      line_cnt     type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN                                                  *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
*                                 "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
*                                 "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
*                                 "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
    ITAB-PERNR      = P0001-PERNR.
    ITAB-ABKRS      = P0001-ABKRS.
    ITAB-ENAME      = P0001-ENAME.
    ITAB-USRID_LONG = P0105-USRID_LONG.
    append itab.
    clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area        : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time         : ', SY-UZEIT.
write : / 'User Name           : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
    clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
    refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
*                                                  Retrieve Payroll results sequence number for this run
    select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
                                    and FPBEG ge W_BEGDA
                                    and FPEND le W_ENDDA
                                    and SRTZA eq 'A'.
*                                                  Produce payslip for those payroll results
    if SY-SUBRC = 0.
      call function 'GET_PAYSLIP'
        EXPORTING
          EMPLOYEE_NUMBER = ITAB-PERNR
          SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
          PAYSLIP_VARIANT = PAY_VAR
        IMPORTING
          RETURN          = RETURN
          P_INFO          = P_INFO
        TABLES
          P_FORM          = P_FORM.
      check RETURN is initial.
*                                                 remove linetype from generated payslip
      loop at p_form.
        objbin = p_form-linda.
        append objbin.
        line_cnt = line_cnt + 1.
      endloop.
      file_length = line_cnt * 1022.
*                                                 create spool file of paylsip
      CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
        EXPORTING
          i_file_length = file_length
        IMPORTING
          e_spoolid     = spool_id
        TABLES
          it_textdata   = objbin.
      IF sy-subrc EQ 0.
        WRITE spool_id.
      ENDIF.
      DESCRIBE table objbin.
      DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
        EXPORTING
          SRC_SPOOLID                    = spool_id
          NO_DIALOG                      = ' '
          DST_DEVICE                     = 'MAIL'
*      PDF_DESTINATION                =
*    IMPORTING
*      PDF_BYTECOUNT                  = l_no_of_bytes
*      PDF_SPOOLID                    = l_pdf_spoolid
*      LIST_PAGECOUNT                 =
*      BTC_JOBNAME                    =
*      BTC_JOBCOUNT                   =
        TABLES
          PDF                            = pdf
        EXCEPTIONS
          ERR_NO_ABAP_SPOOLJOB           = 1
          ERR_NO_SPOOLJOB                = 2
          ERR_NO_PERMISSION              = 3
          ERR_CONV_NOT_POSSIBLE          = 4
          ERR_BAD_DESTDEVICE             = 5
          USER_CANCELLED                 = 6
          ERR_SPOOLERROR                 = 7
          ERR_TEMSEERROR                 = 8
          ERR_BTCJOB_OPEN_FAILED         = 9
          ERR_BTCJOB_SUBMIT_FAILED       = 10
          ERR_BTCJOB_CLOSE_FAILED        = 11
          OTHERS                         = 12
      IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename = 'C:\itab_to_pdf.pdf'
      filetype = 'BIN'
    TABLES
      data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
*    TRANSLATE pdf USING ' ~'.
*    CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
*    it_mess_att = gd_buffer.
*    APPEND it_mess_att.
*    SHIFT gd_buffer LEFT BY 255 PLACES.
*    IF gd_buffer IS INITIAL.
*      EXIT.
*    ENDIF.
* ENDDO.
      OBJHEAD = 'Objhead'.
      append OBJHEAD.
* preparing email subject
      concatenate W_ENDDA(6)
                ' Payslip-'
                ITAB-ENAME+0(28)
                ITAB-PERNR+4(4) ')'
             into DOCDATA-OBJ_DESCR.
      DOCDATA-OBJ_NAME = 'Pay Slip'.
      DOCDATA-OBJ_LANGU = SY-LANGU.
      OBJTXT = 'Pay Slip.'.
      append OBJTXT.
*prepare email lines
      OBJTXT = DOCDATA-OBJ_DESCR.
      append OBJTXT.
      OBJTXT = 'Please find enclosed your current payslip.'.
      append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
      read table OBJTXT index 3.
*    DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
      clear OBJPACK-TRANSF_BIN.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM = 0.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM = 3.
      OBJPACK-DOC_TYPE = 'RAW'.
      append OBJPACK.
* Create Message Attachment
      ATT_TYPE = 'PDF'.
      describe table OBJBIN lines TAB_LINES.
      read table OBJBIN index TAB_LINES.
*    OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
      OBJPACK-TRANSF_BIN = 'X'.
      OBJPACK-HEAD_START = 1.
      OBJPACK-HEAD_NUM = 0.
      OBJPACK-BODY_START = 1.
      OBJPACK-BODY_NUM = TAB_LINES.
      OBJPACK-DOC_TYPE = ATT_TYPE.
      OBJPACK-OBJ_NAME = 'ATTACHMENT'.
      OBJPACK-OBJ_DESCR = 'Payslip'.
      append OBJPACK.
* Create receiver list refresh RECLIST.
      clear RECLIST.
      RECLIST-RECEIVER = itab-USRID_long.
      translate RECLIST-RECEIVER to lower case.
      RECLIST-REC_TYPE = 'U'.
      append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
      call function 'SO_DOCUMENT_SEND_API1'
        exporting
          DOCUMENT_DATA = DOCDATA
          PUT_IN_OUTBOX = 'X'
          COMMIT_WORK = 'X'
* IMPORTING
*   SENT_TO_ALL =
*   NEW_OBJECT_ID =
        tables
          PACKING_LIST = OBJPACK
          OBJECT_HEADER = OBJHEAD
          CONTENTS_BIN = pdf
          CONTENTS_TXT = OBJTXT
*   CONTENTS_HEX =
*   OBJECT_PARA =
*   OBJECT_PARB =
          RECEIVERS = RECLIST
        exceptions
          TOO_MANY_RECEIVERS = 1
          DOCUMENT_NOT_SENT = 2
          DOCUMENT_TYPE_NOT_EXIST = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR = 5
          X_ERROR = 6
          ENQUEUE_ERROR = 7
          others = 8.
      if SY-SUBRC NE 0.
        ITAB-MTEXT = 'Message Not Sent to : '.
      else.
        ITAB-MTEXT = 'Message Sent to : '.
      endif.
*    else.
*      ITAB-MTEXT = 'Message Not Sent to : '.
*    endif.
    else.
      "SY-SUBRC Not = 0
      ITAB-MTEXT = 'Payroll data not found : '.
    endif.
    "end of SY-SUBRC = 0.
    modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
    at new MTEXT.
      uline.
      write : / ITAB-MTEXT color 4 intensified on.
      write : / 'Emp. Code' color 2 intensified on,
             12 'Emp. Name' color 2 intensified on,
             54 'Email ID' color 2 intensified on.
    endat.
    write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop.

How to Convert internal table data into text output and send mail in ABAP

Hi All,
Good Morning.
Taking a glance at a code that converts internal table data to an Excel file in ABAP. also checked how to send this excel to mailing list as attachment.
But thought of doing it without excel.
I mean, I have an internal table which contains fields of all types (character,integer,date,time). Since it is only around 4 to 5 rows in it (output),why to convert it to excel. not required!!. Instead I want to send this output to User's mails as Normal mail body with No attachments.
Could anybody please suggest me a way as to how to send internal table data as a mail ( not as an excel or PDF etc).
as of now my findings are, it is quite complex to convert internal table data to email (Text) format. but i believe if there is some way of doing it.
Best Regards
Dileep VT

here's something I have used in the past where we send out information about failed precalculation settings (which are stored in internal table gt_fail)
notice we use gt_text as "mail body"
TRY.
*     -------- create persistent send request ------------------------
       gv_send_request = cl_bcs=>create_persistent( ).
*     -------- create and set document -------------------------------
*     create text to be sent
       wa_line = text-001.
       APPEND wa_line TO gt_text.
       CLEAR wa_line.
       APPEND wa_line TO gt_text.
       LOOP AT gt_fail ASSIGNING <fs_fail>.
         MOVE <fs_fail>-retry_count TO gv_count.
         CONCATENATE text-002
                     <fs_fail>-setting_id
                     text-003
                     gv_count
                     INTO wa_line SEPARATED BY space.
         APPEND wa_line TO gt_text.
         CLEAR wa_line.
       ENDLOOP.
       APPEND wa_line TO gt_text.
       wa_line = text-007.
       APPEND wa_line TO gt_text.
*     create actual document
       gv_document = cl_document_bcs=>create_document(
                       i_type    = 'RAW'
                       i_text    = gt_text
                       i_length = '12'
                       i_subject = 'Failed Precalculation Settings!' ).
*     add document to send request
       CALL METHOD gv_send_request->set_document( gv_document ).
*     --------- set sender -------------------------------------------
       gv_sender = cl_sapuser_bcs=>create( sy-uname ).
       CALL METHOD gv_send_request->set_sender
         EXPORTING
           i_sender = gv_sender.
*     --------- add recipient (e-mail address) -----------------------
       LOOP AT s_email INTO wa_email.
         MOVE wa_email-low TO gv_email.
         gv_recipient = cl_cam_address_bcs=>create_internet_address(
                                           gv_email ).
         CALL METHOD gv_send_request->add_recipient
           EXPORTING
             i_recipient = gv_recipient
             i_express   = 'X'.
       ENDLOOP.
*     ---------- set to send immediately -----------------------------
       CALL METHOD gv_send_request->set_send_immediately( 'X' ).
*     ---------- send document ---------------------------------------
       CALL METHOD gv_send_request->send(
         EXPORTING
           i_with_error_screen = 'X'
         RECEIVING
           result              = gv_sent_to_all ).
       IF gv_sent_to_all = 'X'.
         WRITE text-004.
       ENDIF.
       COMMIT WORK.
*   exception handling
     CATCH cx_bcs INTO gv_bcs_exception.
       WRITE: text-005.
       WRITE: text-006, gv_bcs_exception->error_type.
       EXIT.
   ENDTRY.
with the following declarations
* TABLES                                                               *
TABLES:
   adr6,
   rsr_prec_sett.
* INTERNAL TABLES & WORK AREAS                                         *
DATA:
   gt_fail          TYPE SORTED TABLE OF rsr_prec_sett
                         WITH UNIQUE KEY setting_id run_date,
   gt_text          TYPE bcsy_text,
   wa_fail          LIKE LINE OF gt_fail,
   wa_line(90)      TYPE c.
FIELD-SYMBOLS:
   <fs_fail>        LIKE LINE OF gt_fail.
* VARIABLES                                                            *
DATA:
   gv_count(4)      TYPE n,
   gv_send_request TYPE REF TO cl_bcs,
   gv_document      TYPE REF TO cl_document_bcs,
   gv_sender        TYPE REF TO cl_sapuser_bcs,
   gv_recipient     TYPE REF TO if_recipient_bcs,
   gv_email         TYPE adr6-smtp_addr,
   gv_bcs_exception TYPE REF TO cx_bcs,
   gv_sent_to_all   TYPE os_boolean.
* SELECTION-SCREEN                                                     *
SELECT-OPTIONS:
   s_email          FOR adr6-smtp_addr NO INTERVALS MODIF ID sel.
DATA:
   wa_email         LIKE LINE OF s_email.

Sending internal table data to application server as an XML file

Hi All,
I am trying to send the internal table data to application server which should be stored in XML format.
I am using the following code:
DATA:
          result TYPE xstring.
        CALL TRANSFORMATION id
        SOURCE tab = p_output-xsfdata
        RESULT XML result.
        OPEN DATASET l_xml_full_path FOR OUTPUT IN BINARY MODE.
        TRANSFER result TO l_xml_full_path.
        CLOSE DATASET l_xml_full_path.
And the content in the internal table is :
3C3F786D6C2076657273696F6E3D22312E30223F3E3C736620786D6C6E733D2275726E3A736
73796D206E616D653D22534653592D44415445223E30362F31302F323030393C2F73796D3E2
50617961626C653C6E65772D6C696E652F3E50617274206F6620746865204E616D653C6E657
.......and so on
With this a file is getting created on the application server, but the data is not correct. I am getting the data something like:
<?xml version="1.0" encoding="utf-8"?>
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0"><asx:values><TAB><item>
PD94bWwgdmVyc2lvbj0iMS4wIj8+PHNmIHhtbG5zPSJ1cm46c2FwLWNv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==</item>
<item>c3ltIG5hbWU9IlNGU1ktREFURSI+MDYvMTAvMjAwOTwvc3ltPiA8c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 anyone tell me the reason why am I getting the data in this way?
Thanks in advance,
Swapna.
Edited by: NagaSwapna Thota on Jun 10, 2009 5:44 PM

HI,
Use this FM SAP_CONVERT_TO_XML_FORMAT to convert the data to XML format and then upload the convert data from the internal table to Application server.

How to send internal table data through mail from report in foreground

hi all,
iam trying to convert the internal table data into excel format and sending it through mail by runnning the report in foreground.
mail is going sucessfully with excel format,but iam facing the problem in the excel format of the material column as follows:
the matrno shows the wrong format -2.63E+11 instead of displaying correct format-263215000000.
Pls suggest the alternative process for the above mentioned problem.
Thanks,
Sivagopal R.

Hi Siva,
Try to copy 263215000000 in one of the cells of excel sheet and press enter.It will automatically convert into -2.63E+11 .
This means the default formatting of the excel sheet makes this happen.If you convert the format of the cell to "NUMBER" then u will get the required result.
But I doubt whether or not it is possible through ABAP programming.
Regards,
Vimal.

How to send Internal table records to Idoc Inbound posting FM to create Ido

Hello Experts,
I have all the data necessary to create shipments in one internal table inside my ABAP program.
I can use BAPI_SHIPMENT_CREATE to create shipments. But associated with this BAPi there is one ALE message type SHIPMENT_CREATEFROMDATA. Now my requirement is to use this message type to cretae my shipments via idocs for one scenario for some of the records in the internal table.
For this message type, I got the inbound function module IDOC_INPUT_SHIPMENT_CREATEFROM from TBDBE table.
Can anybody please let me know how to send the data from the internal table to this inbound function module?
Becasue it has mandatory parameters INPUT_METHOD, MASS_PROCESSING. What values should be passed to these parameters if the data has to be sent to this function module?
Regards.

Hi Ravikanth,
Thankyou very much for your quick reply.
So If I split my internal table data and populate IDOC_DATA and IDOC_CONTROL and pass to the inbound function module directly in my ABAP program, will that be going to create idocs and post shipments?
I mean is it enough to call the Inbound posting function module directly in my ABAP program or any other FMs to be called to take care of ALE settings and shipment creation?
Please confirm.
REgards.

Create Spool from Internal table & converrt the spool to PDF

Hi All,
My requirement is take data from a table and find amount specific to each Vendors . So I took all the data into ITAB and do all the calculation. Later after calculation I have to create a spool from this ITAB and this spool have to convert to PDF. Later this PDF have to seend via email.
To convert the internal table to Spool , I used
LOOP AT t_summ INTO wa_summ.
    w-amount = wa_summ-remittanceamount.
    CONCATENATE wa_summ-vendorcode
                wa_summ-controlnum
                w-amount INTO wa_textdata SEPARATED BY space.
    APPEND wa_textdata TO t_textdata.
ENDLOOP.
DESCRIBE TABLE t_textdata .
w-file_length = syst-tfill * 1022.
l_doctype = 'LIST'.
l_layout = 'X_POSTSCRIPT'.
CONCATENATE ' Listbill Summary Report for' syst-datum INTO
                      l_title SEPARATED BY space.
l_receiver = syst-uname.
* Create Spool
CALL FUNCTION 'RSPO_SR_OPEN'
   EXPORTING
      dest                   = 'LOCL'
*   LDEST                  =
      layout                 = l_layout
      name                   = 'SUMREP'
*   SUFFIX1                =
*   SUFFIX2                =
   copies                 = '1'
*   PRIO                   =
*      immediate_print        = ' '
*   AUTO_DELETE            =
      titleline              = l_title
      receiver               = syst-uname           "
*      division               = l_pri_params-prabt " abteilung
*      authority              = l_pri_params-prber           "
*   POSNAME                =
*   ACTTIME                =
*   LIFETIME               = '8'
*   APPEND                 =
*   COVERPAGE              =
*   CODEPAGE               =
      doctype                = l_doctype
*   ARCHMODE               =
*   ARCHPARAMS             =
*   TELELAND               =
*   TELENUM                =
*   TELENUME               =
     IMPORTING
      handle                 = l_spool_handle
      spoolid                = w-spoolid
EXCEPTIONS
   device_missing         = 1
   name_twice             = 2
   no_such_device         = 3
   operation_failed       = 4
   OTHERS                 = 5
            .                                            "#EC DOM_EQUAL
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'SLVC_C1022_TO_C255'
    EXPORTING
      i_file_length = w-file_length
    TABLES
      it_c1022      = t_textdata
      et_c255       = lt_spool.
l_length = w-file_length.
LOOP AT lt_spool INTO ls_spool.
    l_length = l_length - 255.
    IF ( l_length > 0 ).
      l_line_length = 255.
    ELSE.
      l_line_length = l_length + 255.
    ENDIF.
*   Write contents to spool
    CALL FUNCTION 'RSPO_SR_WRITE'
      EXPORTING
        handle = l_spool_handle
        text   = ls_spool
        length = l_line_length.
ENDLOOP.
* Close Spool
CALL FUNCTION 'RSPO_SR_CLOSE'
    EXPORTING
      handle                 = l_spool_handle
     pages                  = 1
FINAL                  = 'X'
   EXCEPTIONS
     handle_not_valid       = 1
     operation_failed       = 2
     OTHERS                 = 3
By this I can see the spool with data in SP02.
Then to conver to PDF, I used
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      src_spoolid                    = w-spoolid
      no_dialog                      = 'X'
      DST_DEVICE                     = 'LOCL'
*      PDF_DESTINATION                =
    IMPORTING
*      PDF_BYTECOUNT                  =
*      PDF_SPOOLID                    =
      list_pagecount                 = list_pagecount
*      BTC_JOBNAME                    =
*      BTC_JOBCOUNT                   =
   TABLES
     pdf                            = t_pdf
   EXCEPTIONS
     err_no_abap_spooljob           = 1
     err_no_spooljob                = 2
     err_no_permission              = 3
     err_conv_not_possible          = 4
     err_bad_destdevice             = 5
     user_cancelled                 = 6
     err_spoolerror                 = 7
     err_temseerror                 = 8
     err_btcjob_open_failed         = 9
     err_btcjob_submit_failed       = 10
     err_btcjob_close_failed        = 11
     OTHERS                         = 12
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
    CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
*   BIN_FILESIZE                    =
      filename                        = 'D:\t\t.pdf'
     filetype                        = 'BIN'
    TABLES
      data_tab                        = t_pdf
*   FIELDNAMES                      =
   EXCEPTIONS
     file_write_error                = 1
     no_batch                        = 2
     gui_refuse_filetransfer         = 3
     invalid_type                    = 4
     no_authority                    = 5
     unknown_error                   = 6
     header_not_allowed              = 7
     separator_not_allowed           = 8
     filesize_not_allowed            = 9
     header_too_long                 = 10
     dp_error_create                 = 11
     dp_error_send                   = 12
     dp_error_write                  = 13
     unknown_dp_error                = 14
     access_denied                   = 15
     dp_out_of_memory                = 16
     disk_full                       = 17
     dp_timeout                      = 18
     file_not_found                  = 19
     dataprovider_exception          = 20
     control_flush_error             = 21
     OTHERS                          = 22
But later when I go and open the PDF, I am getting an error saying'Page cannot be open because it dont have any pages'
Please help me
Regards,
Nikhil

Hi Nikhil,
<li>If you are still not able to find out the problem. You can an alternative way , which is used for the same purpose.
<li>Try this way. It creates spool and and same CONVERT_ABAPSPOOLJOB_2_PDF fm is used to convert spool to PDF. It works. Test this test program.
   REPORT ztest_notepad.
   DATA:g_val         TYPE c,
        w_pripar      TYPE pri_params,
        w_arcpar      TYPE arc_params,
        i_pdf         TYPE TABLE OF tline,
        spoolid       LIKE tsp01-rqident,
        l_no_of_bytes TYPE i,
        l_pdf_spoolid LIKE tsp01-rqident,
        l_jobname     LIKE tbtcjob-jobname,
        l_jobcount    LIKE tbtcjob-jobcount.
   DATA:it_t001 TYPE TABLE OF t001 WITH HEADER LINE.
   START-OF-SELECTION.
     SELECT * FROM t001 INTO TABLE it_t001.
     "Read, determine, change spool print parameters and archive parameters
     CALL FUNCTION 'GET_PRINT_PARAMETERS'
       EXPORTING
         in_archive_parameters = w_arcpar
         in_parameters          = w_pripar
         layout                 = 'X_65_132'
         line_count             = 65
         line_size              = 132
         no_dialog              = 'X'
       IMPORTING
         out_archive_parameters = w_arcpar
         out_parameters         = w_pripar
         valid                  = g_val.
     IF g_val NE space AND sy-subrc = 0.
       w_pripar-prrel = space.
       w_pripar-primm = space.
       NEW-PAGE PRINT ON NEW-SECTION PARAMETERS w_pripar ARCHIVE PARAMETERS w_arcpar NO DIALOG.
     ENDIF.
     LOOP AT it_t001.
       WRITE:/ it_t001.
     ENDLOOP.
     NEW-PAGE PRINT OFF.
     CALL FUNCTION 'ABAP4_COMMIT_WORK'.
     spoolid = sy-spono.
     CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
       EXPORTING
         src_spoolid   = spoolid
         no_dialog     = ' '
       IMPORTING
         pdf_bytecount = l_no_of_bytes
         pdf_spoolid   = l_pdf_spoolid
         btc_jobname   = l_jobname
         btc_jobcount = l_jobcount
       TABLES
         pdf           = i_pdf.
     CALL FUNCTION 'GUI_DOWNLOAD'
       EXPORTING
         filename = 'C:\temp\test.pdf'
         filetype = 'BIN'
       TABLES
         data_tab = i_pdf.
Thanks
Venkat.

Send internal table to pdf and then email.

hi experts.
i want to send my alv data or any other data like internal table in pdf through email.
anybody help me out plz.

Hi Harris,
You got to use two FMs to achieve this.
First one to get the contents in to an internal table
Second one to send an e-mail with the content selected already.
So, better search SDN to get more info...

Send Internal table to mail with Colman name

Hi,
how can i send the content of internal table to mail ,
i try to convert to HTML and send it but the problem is that i don't get the column name ,
there is another way to send the IT with the column name ?
any e.g will help i am stuck ....
Regards

you can use upto here..and then you can send html table as attachement in the mail
DATA:
t_html TYPE STANDARD TABLE OF w3html WITH HEADER LINE,
" Html Table
*- Declare Internal table and Fieldcatalog
it_fcat TYPE lvc_t_fcat WITH HEADER LINE." Fieldcatalog
DATA: i_table TYPE REF TO data,
wa_line TYPE REF TO data.
FIELD-SYMBOLS: <fs_tab> TYPE STANDARD TABLE,
<fs_wa> TYPE ANY.
DATA:
v_lines TYPE i,
v_field(40).
*-Fieldsymbols
FIELD-SYMBOLS: <fs> TYPE ANY.
PARAMETERS: p_table(30) TYPE c.
* S T A R T - O F - S E L E C T I O N
START-OF-SELECTION.
*-Populate the Fieldcatalog
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = p_table
CHANGING
ct_fieldcat = it_fcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
* Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fcat[]
IMPORTING
ep_table = i_table.
ASSIGN i_table->* TO <fs_tab>.
* Create dynamic work area and assign to FS
CREATE DATA wa_line LIKE LINE OF <fs_tab>.
ASSIGN wa_line->* TO <fs_wa>.
SELECT *
FROM (p_table)
INTO TABLE <fs_tab>
UP TO 20 ROWS.
* E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*-Fill the Column headings and cell properties
DELETE it_fcat WHERE fieldname = 'MANDT'.
t_html-line = '<html>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<td><h1>DB Details</h1></td>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '</thead>'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<table border = "1">'.
APPEND t_html.
CLEAR t_html.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
*-Populate HTML columns from Filedcatalog
LOOP AT it_fcat.
CONCATENATE '<th bgcolor = "green" fgcolor = "black">'
it_fcat-scrtext_l
'</th>' INTO t_html-line.
APPEND t_html.
CLEAR t_html.
ENDLOOP.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
DESCRIBE TABLE it_fcat LINES v_lines.
*-Populate HTML table from Internal table data
LOOP AT <fs_tab> ASSIGNING <fs_wa>.
t_html-line = '<tr>'.
APPEND t_html.
CLEAR t_html.
*-Populate entire row of HTML table
DO v_lines TIMES.
READ TABLE it_fcat INDEX sy-index.
CONCATENATE '<FS_WA>-' it_fcat-fieldname INTO v_field.
ASSIGN (v_field) TO <fs>.
t_html-line = '<td>'.
APPEND t_html.
CLEAR t_html.
t_html-line = <fs>.
APPEND t_html.
CLEAR t_html.
t_html-line = '</td>'.
APPEND t_html.
CLEAR t_html.
CLEAR v_field.
UNASSIGN <fs>.
ENDDO.
t_html-line = '</tr>'.
APPEND t_html.
CLEAR t_html.
ENDLOOP.
t_html-line = '</table>'.
APPEND t_html.
CLEAR t_html.

How to Read the internal table for the data download from the spool

HI all,
I have one issue regarding the spool ,we are getting the correct output as per requirement of user but when we send the same to the user in pdf format they did notget the same.
they are telling that the due date is missing from the pdf.
Please advice me how to track the internal table for the spool data converted intopdf in a readable format.
the FM used for the above task is :
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Please reply if any one worked on the same.
Thanks in advance.
Gaurav,

Hi Wang,
Please let me know how you solved your question.
Points will be rewarded.
Thanks,
Arun.

How Internal table data send to sap mail as a attachment?

Hi,
Can any one please let me know , how we will send internal table data to sap mail.
In my internal table my data output length is more than 255 characters.
Thanks in advance.

Hi
Try out the below code:
DATA: ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des .
*        ld_receiver LIKE sy-subrc.
DATA:   it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
          it_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
          w_cnt TYPE i,
          w_sent_all(1) TYPE c,                             "#EC NEEDED
          w_doc_data LIKE sodocchgi1.
REFRESH it_receivers . CLEAR it_receivers .
IF v_trip_send = 'X'.
    it_receivers-receiver = it_trip_dload-approver_email .
ELSE .
    it_receivers-receiver = it_adv_dload-approver_email .
ENDIF.
it_receivers-rec_type = c_u .
APPEND it_receivers. CLEAR it_receivers.
* it_receivers-receiver =            ' <Email ID>               '              "Email address.
IF v_trip_send = 'X' .
    it_receivers-receiver = it_trip_dload-requester_email .
ELSE .
    it_receivers-receiver = it_adv_dload-requester_email .
ENDIF .
it_receivers-rec_type = c_u .
it_receivers-copy     = 'X' .
APPEND it_receivers. CLEAR it_receivers.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
* Fill the document data.
w_doc_data-doc_size = 1.
* Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = c_saprpt.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
* Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = c_saprpt.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = c_f.
CLEAR it_attachment.
REFRESH it_attachment.
it_attachment[] = it_attach[].
* Describe the body of the message
CLEAR it_packing_list.
REFRESH it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES it_packing_list-body_num.
it_packing_list-doc_type = c_raw.
APPEND it_packing_list.
* Create attachment notification
it_packing_list-transf_bin = c_x.
it_packing_list-head_start = 1.
it_packing_list-head_num   = 1.
it_packing_list-body_start = 1.
DESCRIBE TABLE it_attachment LINES it_packing_list-body_num.
it_packing_list-doc_type   = ld_format.
it_packing_list-obj_descr = ld_attdescription.
it_packing_list-obj_name   = ld_attfilename.
it_packing_list-doc_size   = it_packing_list-body_num * 255.
APPEND it_packing_list.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data = w_doc_data
      put_in_outbox = c_x
      commit_work   = c_x
    IMPORTING
      sent_to_all   = w_sent_all
    TABLES
      packing_list = it_packing_list
      contents_bin = it_attachment
      contents_txt = it_message
      receivers     = it_receivers.
&*********<removed_by_moderator_together_with_6_unmentionables>************&
Edited by: Julius Bussche on Jun 23, 2008 11:04 PM

Retrieve Filtered ALV output into Internal Table in Program

Guys,
I want to update my internal table with the filtered output that the user has selected in the output.
Lets say my internal table had 6 entries which was outputted.
Now the the user filters that output ( say where material is initial ) so that there are only 2 entries left on the output.
How can i know which 2 entries are left on the output screen ?
( i need to know as i am deleting entries from a table )
I came across this slis_filter_alv0 but could not use it in my user exit command routine.
Any ideas would be very helpful.
Cheers.....

Try the method get_filtered_entries
This method teturns a table with all indexes that are currently hidden on the screen using the standard "filter" function.
CALL METHOD
<ref.var. to CL_GUI_ALV_GRID>->get_filtered_entries
IMPORTING
ET_FILTERED_ENTRIES = <int tbl of type LVC_T_FIDX >.
Then by using this internal table you can find out the entries which are shown in the output.
Hope this helps.
Thanks,
Balaji

Passing the Dynamic Internal Table as the Output Parameter of the FM...

Hi,
How can we pass the internal table as the output from the Function Module TABLES parameter.
    SELECT * FROM TVRO BYPASSING BUFFER INTO TABLE <ltable>.
Now I need to pass the dynamic internal table <ltable> as the output in the function module.
Thanks!
Puneet.

I can't use TVRO as the table type. The Table name is as the Input. This program will download the contents of the table and create an app server file. It can be for any database table.
so i want the output of this FM should be the data from that table. So what should be the TABLE type.
like in a program i will use:::
FIELD-SYMBOLS: <ltable> TYPE ANY TABLE,
                 <l_line> TYPE ANY,
                 <l_field> TYPE ANY.
    SELECT * FROM (p_table) BYPASSING BUFFER INTO TABLE <ltable>.
That is my requirement.

Issue with WRITE statement from Internal Table

Hi All,
I have written the below code in a infoset query, the syntax check is ok & when i run the query in debugging mode, i find the internal table being filled with the values & the write statement outputing the values as well.
But the problem is when i execute the query the output does not show all the lines, instead just displays the last record . What could be the mistake?
Is it because i have defined Y_EBELN, Y_EBELP & Y_OPENQTY as nodes in the Extras Tab of the infoset & have chosen this for display in my query? How to display the output from my internal table in my query output?
Hope my problem is clear, await clarification.
Vivek
Code
types:
    Begin of itab,
      wl_ebeln   type eket-ebeln,
      wl_ebelp   type eket-ebelp,
      wl_openqty type eket-menge,
    End of itab.
Data: il_po type table of itab with header line.
*Display open PO for materials
SELECT EKETEBELN EKETEBELP EKETMENGE EKETWEMNG EKET~EINDT
     INTO (Y_EBELN, Y_EBELP, WL_MENGE, WL_WEMNG, Y_EINDT)
    FROM EKET
      INNER JOIN EKPO
         ON EKETEBELN     = EKPOEBELN
          AND EKETEBELP = EKPOEBELP
      INNER JOIN MARD
         ON EKPOMATNR     = MARDMATNR
          AND EKPOWERKS = MARDWERKS
          AND EKPOLGORT = MARDLGORT
    WHERE EKPO~MATNR = MARD-MATNR
      AND EKPO~WERKS = MARD-WERKS
      AND EKPO~LGORT = MARD-LGORT
      AND EKPO~LOEKZ = SPACE
      AND EKPO~ELIKZ = SPACE.
*Display only still open qty per schedule line
Y_OPENQTY = WL_MENGE - WL_WEMNG.
il_po-wl_ebeln = Y_EBELN.
il_po-wl_ebelp = Y_EBELP.
il_po-wl_openqty = Y_OPENQTY.
    append il_po.
ENDSELECT.
ENDIF.
Loop at il_po.
write:/ il_po-wl_ebeln, il_po-wl_ebelp, il_po-wl_openqty.
endloop.

Hi Vivek,
Try it like this.
Data: Begin of itab,
       lifnr type lfa1-lifnr,
       name1 type lfa1-name1,
       land1 type lfa1-land1,
      End of itab,
      it_lfa1 like table of itab with header line,
      lifnr like lfa1-lifnr,
      name1 like lfa1-name1,
      land1 like lfa1-land1.
select lifnr name1 land1 into (lifnr, name1, land1)
       from lfa1.
it_lfa1-lifnr = lifnr.
it_lfa1-name1 = name1.
it_lfa1-land1 = land1.
append it_lfa1.
endselect.
loop at it_lfa1.
write:/ it_lfa1-lifnr, it_lfa1-name1, it_lfa1-land1.
endloop.
Note:
In place of the above select you insert your join select statement. It is working for me.
You have declared your internal table wrongly. In the internal table instead of TYPE use LIKE, it will work.
Hope this will work for you.
Thanks & Regards
Haritha.

Read DMS document into internal table

Hi,
I have a requirement to read DMS document in binary format into internal table.
and i want to print the data in internal table through SAP spool.
Please let me know how to handle this requirement.
Thanks
Srini

Hi,
Check scms pakage, FG - SCMS_CONV for conversions..
Regards
Surjit

Send Internal Table Vaue to Spool Output

Similar Messages

Maybe you are looking for