Send Message in BPM gets "logically deleted"

Hi everybody,
we got a message split in BPM. The singel messages are send through "send context".
Strange:
In SXMB_MONI_BPE the message gets logically deleted.
And in SXMB_MONI the BPM does not send the message to the configured receiver.
The message is send back to the process !?
Any suggestions?
Thanks a lot
Regards Mario

The required number in the fork was wrong!

Similar Messages

Send step in BPM is "logical deleted"

Hi everybody,
we are sending IDOCs from BPM to receiver determination (R/3 Backend).
The BPM protocol marks the send step as "logically deleted".
In SXMB_MONI strange!
Sender = Receiver = BPM
Any ideas?
Regards Mario

The required number in the fork was wrong!

MAIL reply all to large message- "Cannot send message" how to get this to go away

I replied all to a large message and got the notification "cannot send message..." I usually press cancel or try again, but since the message was so large, I don't have access to either buttons. It won't allow me to scroll down and maximizing the message does not help. I have tried force quit and shutting down my computer, but everytime I reopen mail, the message pops up. PLEASE HELP!!!!

Mail: Mail unexpectedly quits when viewing certain messages

Send message that i get from class in popup

HI All
i have method which is returning error message in some cases
and i want to use the text that i getting from the exception object
but to use the FM 'POPUP_DISPLAY_MESSAGE' i need to use a message class etc
i just want to reuse the messge that i getting from the catch
how can i do that ?
and i use the following code to do so
CATCH cx_l_model INTO lx_dup_node.
        lv_dup_msg = lx_dup_node->get_text( ).
        CALL FUNCTION 'POPUP_DISPLAY_MESSAGE'
          EXPORTING
            titel = 'Warning'
            msgid = 'MC_DT'
            msgty = 'W'
            msgno = 006
            msgv1 = lv_dup_msg.
Regards
James

Hi,
Try this
DATA
     : a          TYPE i,
       gr_root    TYPE REF TO cx_root,
       message    TYPE string.
TRY.
    a = 1 / 0.
CATCH cx_sy_zerodivide INTO gr_root.
    message = gr_root->get_text( ).
    CALL FUNCTION 'FC_POPUP_ERR_WARN_MESSAGE'
      EXPORTING
        popup_title        = 'Warning'
       IS_ERROR           = ' '
        message_text       = message
       start_column       = 10
       start_row          = 1
ENDTRY.
Or
DATA
     : a          TYPE i,
       gr_root    TYPE REF TO cx_root,
       message    TYPE string.
TRY.
    a = 1 / 0.
CATCH cx_sy_zerodivide INTO gr_root.
    message = gr_root->get_text( ).
    MESSAGE i017(appl_common) WITH message
            DISPLAY LIKE 'W'.
ENDTRY.
Regards

Work Item not getting logically deleted

Hi All,
We have created a custom workflow for PR approval at Item Level. I have RELEASE STEP CREATED as triggering event.
I have used a FORK with 5 branches with 4 wait events and min cond as 1. The inherited business object ZBUS2009 has been created with events CHANGE, DELETED. The business object has been delegated to Original Business object BUS2009.
To trigger the events like DELETED and CHANGED, I have used POSTED METHOD of ME_REQ_POSTED BADI.
When a PR Item is created the agents are determined successfully and work item is placed in his SAP Inbox. Later the PR Item has been deleted and saved the BADI Implementation is triggered and I can see the log in SWEL for DELETED event with success icon.
However when i go back to PR Item which i have deleted and see the workflow log the work item is still in the approver's inbox. but the graphic log shows that the DELETED branch of the fork is completed. I tried all options like Buffer synch, background job, queue admin etc with no success.
I did the same workflow at one of my previous clients and it is working perfectly for last 2yrs.
Can any one guide me on what could have gone wrong or what i am missing?
Thank you all in advance for help...
Regards,
Lakshmi Narayana

Hi Arghadip,
Thanks for your quick response.
The fork is having 5 parallel branchs and 1 necessary branch and is INDEED HAS NO EXTRA CONDITIONS.
Also as i mentioned the graphical log shows that the completion of BRANCH Beneth DELETED but the work item is still in approver's inbox.
Please let me know if I am missing something....
Rgds,
Lakshmi

Sending message while order get Pending Status

Hi,
We r using status profile for releasing order. If order fails the condition, it remains in the Pending Status. So we need to send these order to Sales Rep for review. How to send email to Sales Rep?

Hello
Create 'Z' Report and [send that report by mail|http://www.sap-img.com/fu016.htm]
Thanks & Regards
JP

BBM Q10 Sending messages getting stuck

very strange behaviour with BBM
I have BB Q10 and my wife BB 9900
We can chat on BBM as see each other online. BB9900 can send messages and Q10 get them fine, but when I send messages with Q10 I get an X. my wife can not get them.
We have done everything latest version update. sim card out, batteries out, restarts, ping.
Is anything we missing we can do.

Hi Massimo-Deb,
Welcome to the support community!
Could you provide a bit more detail please so I can assist you better?
Are you having this issue sending BBM messages to any other of your contacts?
Is your wife able to send and receive BBM messages with all other contacts?
Does this happen each time you try to send her a BBM message or certain times only?
Have you tried removing and re-adding each other as contacts and testing?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Wait for Event FIPP - Completed Logically Deleted

Hi WF Experts,
We have a WF for Release of payments.
It has 1 Fork with 2 parallel branches (both necessary).
1 Branch has the approval process for Amount release and the other branch calling the Account assignment approval Subworkflow.
The approval process branch has the until loop with increment counter and it picks the agents within the loop until a loop condition is reached and thereby till no more approvals required.
The other branch, before calling the subworkflow, it checks a WAIT FOR EVENT FIPP->COMPLETED with container element FIPPID.
Both these branches needs to be completed so that the forks gets ended and the wf comes out of the fork.
The approval process branch is working perfectly. But in the other branch the WAIT FOR EVENT FIPP->COMPLETED gets logically deleted and thereby, this branch does not go firther to start the Account assignment approval Subworkflow. This way the Fork with the 2 necessary branches does not end, and thereby, the WF stops here and could not go further to set release indicators (Which is a backgorund task).This will confirm the end of WF process.
When I pass the WI ID for this Wait event in the SWIA, it shows the status as CANCELLED.
The WF User log as a whole shows the status as COMPLETED as all the approvers has approved the release.
Why is the Wait for Event gets logically deleted ?Please advice.
Edited by: Sameer Anwar on Jun 12, 2011 9:17 AM
Edited by: Sameer Anwar on Jun 12, 2011 9:21 AM

Dear Experts,
Any update on this . I am unable to sort this out why the Workflow is getting stopped.
-Anwar

Logical deletion of workitems in fork branches.

Hi gurus,
I had to parallely execute some workitems and i used a fork for the same. But the workitems within the fork are getting logically deleted. Please give suggessions on how to avoid this.
Regards,
Sukumar.

Hi Sukumar,
that's SAP standard behaviour.
If you create a fork with a 1 out of 3 for succession, first 3 workitems will get created, if one of these branches reach the end of the fork, the condition is met and the other 2 will get logically deleted .
Kind regards, Rob Dielemans

Sms send message VI Dialog box

Whenever I get an error using the SMS Send Message.vi I get a dialog box that disables my program unless I manually answer the prompt. Can NI (or anybody else) please
1. Have an option to disable the dialog box
2. Unpassword protect the VI so I can do it myself
3. Give me some other option I missing.
Thank you
Robert

Hi Robert,
Since the Clear Errors VI is not available with a PDA application, you can use a case structure to clear errors instead. Wire the error out of SMS Send Message to the case selector. In the Error case place an error cluster constant (right click on error out and Create >> Constant) to pass through the remainder of your program. For the No Error case, pass the error wire straight through.
Message Edited by Jennifer_R on 02-04-2008 06:54 AM
Jennifer R.
National Instruments
Applications Engineer
Attachments:
Clear Error.JPG ‏5 KB

Can't send message

Hi all,
I'm experiencing weird problem. I can't send message to anybody. It's still stuck on "rotating" status. But still can receive messages. And one more thing - can't make and answer any calls.. Any suggestions?

Hi, I just bought a nokia 5230 and I'm having problems to send messages; they are getting stuck in the outbox folder. I changed to message centre but it is still not working. Can someone help me to resolve the issue? Thanks

6085 won't send messages

This phone had been working great for a couple of years and I stopped using it for a while. And because I hadn't used it, I had to get a new sim card. After I put the new sim card in, everything works except sending messages. I get this error msg: "content not supported." Any ideas? thx

First ensure you have the correct message center number,next try free up your message folders and last try a factory reset type in *#7780# if asked for code its 12345
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

WOrkitem Getting logically deleated

Hi All experts,
I have a workflow is working fine in production but from last few months there are some problems in this workflow.
even now most of the time it is working fine.
There is a wait step in which we have applied a deadline monitoring.
this wait step gets completed on some particular date.
i checked few workitems in production which are getting logically deleted.
Please help me in finding out few things.
1)How it got logically deleted?
2) can we check on which date or time its status got changed to logically deleted.
3) How to correct this issue?
4) Can we change the status to logically deleted to ready or start
5)is there any way to restart this workflow?
Thanks in advance

Rick,
Thanks for your rply.
I checked the step history everything is lookin gud and everything is in green status.
This workflow is not looking for any event.
This is the wait step which is waiting till some specified date and it is getting into error state.
it is getting logically deleted.
I checked header data there is nothing defined in event tab.
also in production i am not allowed to switch on the swels transaction.
You could look in the step history in the workflow log to see if it tells you who logically deleted it.
can it be because of some SWU3 transaction?????
cant we find out which user or which program changed its status to cancelled?
you no i checked few more workflows which has wait step and they are also getting logically deleted .
this will kill me.
Please guide me.
Thanks in advance

I cleared a conversation in messages. I did not delete. How can I get it all the messages back from this sender.

I cleared a conversation in my messages. I do not delete. How do I get all the messages back from this sender?

Clearing a conversation is the same as deleting the messages, so unfortunately they're gone. You could always restore from a previous backup, but you would lose anything that you've added/changed etc on your phone between the last time you synced your phone and now.

In my Iphone 5 and I Pad inbox i get dozens of mysterious messages that I can't delete. They all say (No Sender) (No Subject) This message has no content Date: different but all of them way before the internet (late 60's early 70's and some times 2000)

In my Iphone 5 and I Pad inbox i get dozens of mysterious messages that I can't delete. They all say
(No Sender)
(No Subject)
This message has no content
Date: different but all of them way before the internet (late 60's early 70's and some times 2000)
can't open or delete any of them. These messages are not on my PC
I have three different accounts but it seems like they are coming from my gmail account
Thanks for the help
JC Garza

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Send Message in BPM gets "logically deleted"

Similar Messages

Maybe you are looking for