Send/recive SMS through usb cabel and nokia pc suite

Hi All,
I'm new here and I hope to get support,
I connect my mobile nokia 3110c to the pc using usb and nokia pc suite everything is fine and work,
Now, My goal is to send sms using java file called after insert trigger on oracle DB
How can I do this? What I should using socket or....? What I should read? or using any other sms server program or any example.
Thanks in Advance,
Manssi
Edited by: JavaIQ on Oct 2, 2007 10:10 AM

{color:#000080}Nokia PC suite is not required, but the modem driver for your device must be available on your PC.
Download smslib from
{color}{color:#0000ff}http://code.google.com/p/smslib/{color}{color:#000080}
Check out the code samples in src/java/examples/modem in the zip file.
Note that sending SMS through a mobile device will restrict you to about 7-8 messages per minute (typical).
Darryl{color}

Similar Messages

Windows Vista and Nokia PC Suite

Hi
I have a problem with compatibility of nokia pc suite , it doesnt work on Windows Vista , and i have to install some apps to my phone through usb cabel because i havent bluetooth card in my pc ( Is it any version for Windows Vista ? I didnt find it on czech nokia official web sites Message Edited by doom4 on 11-Mar-2007
01:59 PM

11-Mar-2007
01:58 PM
doom4 wrote:
Hi
I have a problem with compatibility of nokia pc suite , it doesnt work on Windows Vista , and i have to install some apps to my phone through usb cabel because i havent bluetooth card in my pc ( Is it any version for Windows Vista ? I didnt find it on czech nokia official web sites Message Edited by doom4 on 11-Mar-2007
01:59 PM
What version of Vista do you have? 32bit or 64bit? I have a 32bit Vista Ultimate and PC Suite works fine.
Nokia N73 v 4.0735.3.0.2 RM 133

Send/receive SMS through Android phone

Hi! I am looking for an application that would run on Linux (and doesn't use Google accounts or a cloud) to send and receive SMS through my noname Android phone. Does anyone know of any?
Thanks !
(Sorry if I'm in the wrong subforum, I didn't know where to put it)
Last edited by Lala0KjOA (2014-10-02 10:22:06)

ewaller wrote:What version Android?
It's 4.2.2
ewaller wrote:Your emphatic 'yes' back in post 15, was that a yes to both of my questions?
Yes.
ewaller wrote:Anything interesting in the end of the output of dmesg after you attach?
When I connect with MTP (I guess?)
[105556.660105] usb 1-5: new high-speed USB device number 14 using xhci_hcd
[105556.834682] usb-storage 1-5:1.0: USB Mass Storage device detected
[105556.834747] scsi12 : usb-storage 1-5:1.0
[105557.837579] scsi 12:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
[105557.839758] sd 12:0:0:0: [sdc] Attached SCSI removable disk
[105559.587703] usb 1-5: USB disconnect, device number 14
[105560.081577] usb 1-5: new high-speed USB device number 15 using xhci_hcd
[105560.258043] usb-storage 1-5:1.0: USB Mass Storage device detected
[105560.258157] scsi13 : usb-storage 1-5:1.0
[105561.259137] scsi 13:0:0:0: CD-ROM Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
[105561.260665] sr1: scsi-1 drive
[105561.260774] sr 13:0:0:0: Attached scsi CD-ROM sr1
It mounts as a CD-ROM indeed, and contains ADB.rar.
When I connect as a USB mass storage
[105638.772182] usb 1-5: new high-speed USB device number 17 using xhci_hcd
[105638.947087] usb-storage 1-5:1.0: USB Mass Storage device detected
[105638.947178] scsi14 : usb-storage 1-5:1.0
[105639.949710] scsi 14:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
[105639.950990] sd 14:0:0:0: [sdc] Attached SCSI removable disk
[105659.265279] sd 14:0:0:0: [sdc] 7698432 512-byte logical blocks: (3.94 GB/3.67 GiB)
[105659.265515] sd 14:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[105659.272662] sdc: sdc1
Also,
$ adb devices
List of devices attached
$ adb shell
error: device not found
Maybe I did something wrong, but also, the phone is very cheap. Thanks for helping!

How to send a sms through froms6i..........

Can nyone tell me how to send sms through forms6i....................its urgent................

hey there are many companies giving sms power to you...
so you can do one thing just make the code below in your button trigger
and supply the required parameters...
host('C:\Program Files\Internet Explorer\IEXPLORE.exe http:\\www.'||:IE);
and then :IE is one of text field there you can write som thing like below...
http://<your service provider website name and path > ?outLogin=<login>&outPWD=<password>&outMSG=<sms_msg>&outNumber=<phone number>&sign=<signature>
you have to replace <param name> and make appropriate changes...
one website i know is....."http://timessms.com"
Enjoy Oracle....
Message was edited by:
Ravi Suthar

6280, 6230 and Nokia PC Suite - no calendat sync

I am using version 6.81.13.0 of PC Suite on a late-model Dell 9300 notebook. I connect using a Nokia CA-53 USB cable supplied with my 6280 phone. The PC is running Windows XP Professional SP2 with all available Microsoft patches.
Until recently, I was using a Nokia 6230 phone and an older version of PC Suite. The calendar was sent from the PC to the phone with no problem at all, and I could always refer to my phone to check my calendar. This connection used Bluetooth.
When my new 6280 arrived, I loaded the PC Suite software from the 6280 CD. The software immediately demanded an update from the Nokia website, which I downloaded and installed. After a couple of successful bluetooth connections, suddenly neither phone would sync with Outlook.
Very soon after that, no Bluetooth connection would work at all, and I resorted to the USB cable. With the USB cable, the phones communicate with the Sync software, but no data is sent to either phone. I have removed the software, used the Nokia PC Suite Cleaner, reinstalled, created new profiles and tried every single option, but the system simply will not sync.
Can anyone help? By upgrading my phone, I have lost my sync facility altogether.
Here's the system info from PC Suite:
Operating system:
Microsoft Windows XP
Build 2600
Service Pack 2
Language: English (United States)
Language for non-Unicode programs: English (United States)
Locale: English (United Kingdom)
Input language: English (United Kingdom)
Nokia PC Suite:
Version 6.81.13.0
Language: English
Connectivity Cable Drivers:
Version 6.81.1.2
Microsoft Outlook:
Version 11.0
Build 8010
Bluetooth stacks:
Microsoft Bluetooth stack
Version 5.1.2600.2180
WIDCOMM Bluetooth stack
Version 4.0.1
Build 2401

The difficulties people with XP SP 2 (with Microsoft Bluetooth) and any other Bluetooth(like Widcomm) are having, is really sad.
YOu can try to run arepair to PC Suite and Nokia Connecitivty solution from add/remove programs and see if that helps.
Also check that is the Bluetooth software you are using (I cannot tell by looking at your list), is working with the phone.
Last resort:
I can only suggest that you start from scrach, uninstall the widcomm, Pc Suite and Connectivity solution, run Pc suite cleaner and reinstall PC Suite(includes the connectivity solution).

E71 unplugged and Nokia PC Suite issue

Hello,
I use Nokia PC Suite with my E71 with USB connection.
When I unplug my phone from the PC, I can't connect again. The USB connection doesn't recognize the phone, even if I stop and start PC suite.
I must restart my PC.
Any solution ?
Thank's for help.

Download and install Ovi suite. Your phone is compatible here is the link. http://www.nokia.co.uk/support/product-support/nokia-ovi-suite/compatibility-and-download

Nokia 2720 and Nokia PC Suite

Hi All
I have just bought a new Nokia 2720 with an CA-70 cable.
I installed PC Suite and then connected the phone to the PC with the CA-70 cable, but it won`t work.
The manual says, that I have to select connection mode for the device : PC Suite,Mass Storage or the default option - but I can`t figure how to do that. I can`t find it in the Nokia manual.
Can anyone help me, please

Re: Nokia 2720 and PC Suite - used previous Nokia mobile with PC Suite on windows XP without problem. Am now unable to connect my Nokia 2720 by cable to latest Nokia PC Suite (7.1) on windows 7. Have re-installed PC Suite and cable software and followed all guidelines - also tried different cable but mobile is not visible to computer. Help.

JBuilder 5 and Nokia Developer Suite

I'm facing a serious problem, my pc is running Windows2000 and I try to install JBuilder 5 Personal Edition with Nokia MobileSet. However after I installed it my start menu didn't have the program group for JBuilder and when I installed Nokia Developer Suite, it occured error, can anyone help me to solve this problem?
Your help is appreciated.

I installed JB5 and Nokia Suite on my win2000 computer too. it works well.
I think you`d better
1. uninstall JB5;
2. re-install JB5;
3. install Mobil set from Borland, I think the newest one is 1.0.3. it is free.
4. install nokia suite
5. install nokia emulator
it is easy to use all defalut path for installing everything
I hope it may help you. otherwise, tell me more detail of what problem you had

Sending an SMS via adress book and my Phone

I have an SE K800i, How do I send SMS and Call via address book and my phone when it is connected via blutooth ?
I know it can be done but I don't know how to do it.
Many Thanks

Hi,
I recently picked up the same phone, ie the Sony Eric K800i and have been trying to get the 'send sms message' through the address book. I know this works 'cos i had a previous sony ericsson model and it worked fine but with this unit it doesn't seem to push it through.
Where am i going wrong?....... I've set my device up with the Bluetooth *** and paired it and clicked on the button in the top corner of the address book ........ but to no avail,...... can anyone help.
Thanks
Robert

How are the Basis Config Steps involved in sending an SMS through Workflows

Hi Every one,
WE are implementing sending SMS's through workflows what are the various Configs that need to be maintained..
Regards,
Raj

Please close this thread as it is an duplicate one.
Regards,
Martin

Sending ASCII commands through USB hub

I am having issues connecting to hardware. I have 3 types of hardware connected to a Serial to USB converter hub. 2 of the hardware take ASCII commands while the other does not. I am able to communicate with the hardware individually without the hub but when I connect the hardware to the hub and the hub to my computer, it does not work. I do not think MAX sees the hardware connected. Any ideas?
CLD Certified 2014

When you say "hub", are you talking about a product like the QUATECH USB to serial adapter (4 ports)?
If so, then each port has its own serial port assigned to it. You should be able to communicate through it using a terminal emulator, such as HyperTerm, TerraTerm, ProCOMM, etc.
You do have to install the driver for the box and you can also configure the starting COM port number. For instance, Port A on my box is COM-3.
You can open multiple ports in parallel, as long as you select different COM port numbers.
MAX should see the serial ports.

I need to find out how much wifi data my apps are using. I have a very limited amount of wifi data, and I am exceeding my monthly allowance. Apparently, even apps I think are not open are sending/receiving data through the wifi and using up my allowance.

I need to find out how much wifi data my apps are using. I am on a very limited amount of WiFi data each month, which I am regularly exceeding. I have been told to work out which of my apps is using the data. Also, I think I have closed an app by double clicking the home button, then swiping the app up - is this the way to close it, or will it still be sending/receiving data?

Go into your Settings : General : and turn off background refresh for your apps. In Settings : Mail turn Fetch new data to OFF and Load Remote Images to OFF. This will mean that Mail will only check for messages when you actually use it, and all your advertising junk mail won't have all the images in it.
Turn off push notifications every chance you get.
Make sure you are actually quitting apps: to quit apps press the Home button twice and you should see a bunch of smaller screen images for every open app. To quit the app swipe from the screen image (not the icon) upward off the top of the iPad. You can swipe left and right to see more open apps, but there must be no left-right movement on the screen when you swipe upward to close the app.
Turn off your internet connection when you do not need it. The easiest way to do this is to swipe up from the bottom of you screen to get the control centre, and then touch the airplane to turn on airplane mode. You can repeat this sequence to turn it back on again when you need it. Most especially turn airplane mode on whenever you are sleeping your iPad for long periods. This will save battery life too. OR actually turn your iPad off - which means holding the power key down for several seconds until the red swipe bar appears, and then swipe to turn it off. If you go this route, note that it will take longer to turn on then it takes to wake from sleep.

Cannot send/receive Fax through Windows Fax and Scan

Having a problem with Windows Fax and Scan on Small Business Server 2011 Standard SP1. When I call the fax number, I can see the line ringing in the Fax Status Monitor, but it errors out with "The incoming call cannot be answered as a fax
call". I've also tried sending and receive an error: "No dial tone was detected" I've connected a regular phone to the line and placed an outside call and received a call from an outside line. No errors are logged in Event
Viewer, but If I check the Server Roles, Fax Server shows Event ID 32092, 32032 and 32031
Troubleshooting so far has consisted of:
Restarting Fax service
Removing/Readding the Fax Account in Windows Fax and Scan
Checked Print Spooler and Fax queue for held documents to clear (none)
Uninstalled/reinstalled the fax modem in Device Manager
Run Windows Update(several security updates pending)
Checked the DeviceToMonitor key in HKCU to HKLM\Software\Microsoft\Fax\UserInfo matches the DeviceName key in HKLM\SOFTWARE\Microsoft\Fax (at one point it did not match)
Removing/Readding the Fax Role. In the process, also removing registry keys: HKLM_SOFTWARE_MICROSOFT_FAX, HKCU_Software_Microsoft_Fax, HKLM_SOFTWARE_Microsoft_Windows_CurrentVersion_Telephony_CountryList, HKLM_SOFTWARE_Microsoft_Windows_CurrentVersion_Telephony_Locations.
At one point or another, I have already reviewed the following links:
http://social.technet.microsoft.com/Forums/en-US/9dfec81d-8223-47fd-a208-c27521d414a9/sbs2008-cannot-configure-or-start-fax-service?forum=smallbusinessserver
http://social.technet.microsoft.com/Forums/en-US/winserverprint/thread/73394a76-4dab-4f6b-abaf-b794c57a750c/
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/in-windows-fax-and-scan-i-cannot-get-the-fax/219a1468-7214-4b7a-9205-c67131f6f08d
http://social.technet.microsoft.com/Forums/windowsserver/en-US/773a35b3-52b1-4aff-be75-55386fd5d5b2/server-2003-fax-service-unable-to-receive-faxes-the-incoming-call-cannot-be-answered-as-a-fax-call?forum=winserverprint
http://social.technet.microsoft.com/Forums/windowsserver/en-US/73394a76-4dab-4f6b-abaf-b794c57a750c/cannot-add-a-fax-account-in-windows-server-2008-r2-enterprise?forum=winserverprint
Please let me know if anyone has any other suggestions.

Hi billats,
Regarding to Event ID 32092, 32032 and 32031, please refer to the following articles.
Event ID 32092 — Received Fax Status
Event
ID: 32092 Source: Microsoft Fax
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Event ID 32032 — Sent Fax Status
Event ID 32031 — Sent Fax Status
On current situation, please refer to the following steps to troubleshoot. Then check if can find more clues
and help us to solve this issue.
Please verify if the incoming fax can be received from other fax machines.
For modem, please temporarily reduced the speed to 4800bps for the Fax software.
Please increase the
Rings before answering value for the fax device to 2 rings in Shared Fax Service Manager.
Just for a test. Would you replace the old modem with a new one? Then monitor the result.
Hope this helps.
Best regards,
Justin Gu

I have a problem. I updatet to 5.0 and then Itunes can not find the phone and on the screen on the phone there are only a picture of an usb cabel and a logo for Itunes.

After updating Itunes can not find the phone and on the phone screen there are only a picture of an USBcabel and a Itunes logo. What can I do???

Try this previous correctly answered discussion
https://discussions.apple.com/message/11029862#11029862

PC-Suite, Nokia Suite and NokiA Ovi suite do not r...

Hi,
please have a look to this link /t5/Eseries-and-Communicators/E75-I-can-t-connect-my-mobile-to-Nokia-Suite-Pc-Suite-with-cable/td-p/...

sorry, i thought i was replying to a different thread i had allreayd posted my problem in, whihc is...
I had the firmware updated on my N70 today to get rid of the dreaded orange home screen at a nokia dealer, but when I try to connect to my PC it won’t work.
When I first got home and plugged it in via USB windows first told me the USB device was not reqocnised, so I pulled out the cable and put it in as advised. it seemed to be ok then, but just after i went to transfer some music over but it wouldn’t let me (as if my phone was not connected) and PC suit said I didnt have a phone connected, although I could see my phone under 'my computer' but couldn’t transfer any thing over.
So I downloaded PC suite again to make sure I had up to date software and drivers, I already had them it seemed but I unistalled and install them again just in case. But when I come to set up the connection the set up screen simply hangs, although the cable is working as windows makes that noise and it pops up to say N70 found, but then a second later says the install didn’t work, all the time the setup screen still hangs in the background.
I have tried every thing in this thread and others including doing the clean setup from nokia.
My firmware version: 3.0546.2.3.18-11-05RM-84
Windows XP SP2
Please help.
Thanks

Send/recive SMS through usb cabel and nokia pc suite

Similar Messages

Maybe you are looking for