"Send to Color" Not Working in managed clients with Open Directory

Hello,
Previously, i try to do this from a local user, with finished sequence, initiated the "send to color" command from the pop up menu, named the project, graded the footage and output the results.
However when i log with a network managed client when I click, "send to color", the dialog box comes up to name the Color project, which I do, but then when I click past that, nothing happens. Color does not open, nothing seems to be exported or "sent". Any ideas?

Same issue here. Trashed prefs, no effect

Similar Messages

OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.

OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old opeopen directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.

I wonder if the disk being referred to is actually your iPod which is not plugged in. Maybe something has stuck thinking the iPod should be there.
Try completely removing all the iTunes related programs according to this method.
http://support.apple.com/kb/HT1923
Restart you PC and see if startup improves.
If it doesn't improve you need to consider the possibility that there is something else going on.
If The problem goes away, hopefully a fresh install will be OK.

Send to Color not working

Ok guys, I have searched everywhere and I reckon I have tried everything. Basically I have a sequence that I sent to color, go to color, colour correct everything, render and then select Send to Final Cut Pro. FCP open, says importing XML, gets to about 50% and stops, no message or error. I don't get a new sequence from color, just nothing.
Tried importing just the XML with the came result.
I have tried trashing the prefs, went back through the time line and removed every effect and transition. Still does not work. I had it work once before and everything was fine. But now.....it is so frustrating. I just want it to work as I need to get this video finished.
I am running FCP 6.2 and color 1.2, the latest anyway. Does anyone have any ideas. I have wasted days on this and cannot get it to work.
Message was edited by: Jared Bell

Without access to the sequence, its impossible to say.
There is something in it that is corrupting the round trip. It might be illegal media (which would be otherwise perfectly fine in FCP) or it might be something nested that XML can't cope with, re-directing the links to the new media. Unfortunately, the KISS principle is king.
jPo

J2se version="1.6+" in JNLP not working on a client with Java 1.5

Hi all,
In my deployment scenario I have two jnlp files, one for the app and one for its installer extension. The deployment process works fine on a client with J2SE 1.6 but there are some problems when the client has an older Java installed.
I am trying to enforce a J2SE 1.6 version for my app deployed with WebStart and I have found that
<j2se version="1.6+" ...> has no effect.
The solution that I have found was to change "1.6+" into "1.6.***" and thus the JWS will download and install JRE 1.6 (however I was expecting it to download the latest JRE (update 16) but it installs 1.6 update 7).
Could anybody confirm that?
Thank you in advance.

Thanks for the reply. I think Sun should update the auto-downloaded jre from 6u7 to the latest one.
But this is a minor issue. The problem from my post is that you cannot impose a j2se version number 1.6 or greater. IOW <j2se version="1.6+" ... > has no effect. I have tested this on a clean win xp machine that had installed only j2se 1.5.
I think it is a bug in jws but I want to check this issue with others.

Group Policy not work in some client machine.

Hello All,
Existing environment is AD 2012. gpupdate /force command does not working in some client machine. And it's occur randomly. Error shown about 15-20% of client machine. Please suggest. Hopefully this time get reply from community.
The Error:
User policy could not be updated successfully. The following errors were encount
ered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.
b) File Replication Service Latency (a file created on another domain controller
has not replicated to the current domain controller).
c) The Distributed File System (DFS) client has been disabled.
Computer policy could not be updated successfully. The following errors were enc
ountered:
The processing of Group Policy failed. Windows attempted to read the file \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini from a domain controller and was not successful. Group Policy set
tings may not be applied until this event is resolved. This issue may be transie
nt and could be caused by one or more of the following:
a) Name Resolution/Network Connectivity to the current domain controller.

Thanks for your reply. basically this error occurs with in same location as well as branch location. i have check event log in AD but not got any specific error. AD health status is ok. AD to AD synchronization also working well. All the client machine running
on windows 7 64 bit and few of them are windows 8.
Please suggest. if you need any event log for analysis i can send you.
Thanks
I recommend you examine the event logs upon an affected client machine. Specifically, look for the surrounding events on that machine (both System, and Application logs), for the hours previous and the hour after.
The time period may vary according to your environment (e.g. what is expected/normal for your environment, your configured GP refresh cycle-time).
e.g., are there network drops, or power drops, or system crashes, restarts at the similar time.
if it's a laptop, is it wireless? Was there a transition from wireless to wired operation?
Is there VPN in use?
If you are able to compare with another machine (I would encourage that), to understand what "normal" looks like in the logs, so that you have some kind of baseline data for comparison.
Other checks, maybe confirm that the machines are updating as required (have the relevant WindowsUpdates etc), and consider if some security/protection/firewall software might be interfering with normal Windows operations.
Also the potential for malware or virus, which can disturb many basic services (ensure a scan is performed and returns clean).
If you have the opportunity for an affected user to contact you urgently when the symptom occurs, check that the gpt.ini file is accessible from their PC.
e.g.: \\example.net\sysvol\example.net\Policies\{31B2F340-016D-11D2-945F-00C04FB
984F9}\gpt.ini
This file is hosted within the replicated SYSVOL share on your DC's, so check that it is accessible.
You might also validate the particular GPO this refers to, and check each of your DC's holds the correct copy of the files for that GPO GUID.
If you open that GPO, and perform a minor change to it (e.g. add a comment), then click Apply, OK, this should cause the GPO contents to replicate an updated version (be cautious, depending upon the nature of that GPO !!!)
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

HT201320 I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

Well, this is a recurring issue for many users...a small percentage of users but still a bug. Report the issue here to Apple: www.apple.com/feedback
iOS7.0.3 will be released next week, which as of now, I know is primarily for an iMessage but hopefully it will clear up some of these email issues some are also having.

Could not start NetSupport Manager Client For MacOS X because the lice

Could not start NetSupport Manager Client For MacOS X because the licence expired
"Could not start NetSupport Manager Client For MacOS X because the license file has expired."
I have a suspicion the above is a result of an old version of a program from a previous version of MACOS having been migrated, even from a PPC machine (PB17 to be exact).
My issue is how to fix it. What is the exact programme in error? What do i delete?
I have even upgraded to Leopard and the problem migrates to that(!) So clearly I have to manually sort this out. But how?
Many thanks
Anthony
reposted original 19/nov/2007 unanswered

NetSupport Manager's web site would appear to be here (found via a quick web search):
http://www.netsupportmanager.com/
They should be able to tell you how to install their product, if the download doesn't contain an uninstaller (I'm not going to register with them just to find out).
Regards

Could not start NetSupport Manager Client For MacOS X because the license e

"Could not start NetSupport Manager Client For MacOS X because the license file has expired."
I have a suspicion the above is a result of an old version of a program from a previous version of MACOS having been migrated, even from a PPC machine (PB17 to be exact).
My issue is how to fix it. What is the exact programme in error? What do i delete?
I have even upgraded to Leopard and the problem migrates to that(!) So clearly I have to manually sort this out. But how?
Many thanks
Anthony

NetSupport Manager's web site would appear to be here (found via a quick web search):
http://www.netsupportmanager.com/
They should be able to tell you how to install their product, if the download doesn't contain an uninstaller (I'm not going to register with them just to find out).
Regards

Send & Recieve functionality not working with WebDav after installing Acrobat XI

Send & Recieve functionality not working with WebDav after installing Acrobat XI for PDF. Acrobat XI is complete installations(Trial Version).

Hi Kiro ,
Did you try opening that file in any other browser ?If not ,please try doing that once and see if that works for you.
Try Repairing Acrobat once and see if that helps.
Launch Acrobat>Navigate to Help>Repair Acrobat Installation.
Regards
Sukrit Dhingra

Addon is not working on Thin Client

Dear,
Here I am facing one problem in thin client architecture.
Means there is one SERVER (Monitor + CPU) and 10 clients (Only Monitor).
These 10clients monitor directly connect to server CPU means server & client
both having same hard disk.
Now the prob is tat ADDon is successfully installed on server and is working
perfectly. But when we login through client it gives me connection error. He is not
able to make a connection from client even though HARD DISK is same for client
and server.
Also I m not able to debugg our code on client side means dotnet program is
opening on client but when I run my prog. it gives me error to Stop Debugging and
also i checked config file and connection string. ITs ok and successfuly run on server.
Please help me on this issue. If there is code / network problem then pls clear by steps.
Thanks
Regards

Dear
Thanks for ur suggestion.
BUt problem is still the same and I confirmed that there is no Citrix server and no firewall.
And also screen painter is not working on Thin Client PC. It gives me error that
"COM UI was closed.To reload the COM Ui restart SAP Business One and Start Screen Painter".
I did the same thing but still screen painter is not working
Regards
Vikas

Send to is not working when a document library is associated with work flow.

Send to is not working when a document library is associated with work flow.
question is when a workflow is tied to list send to don't work ?
we get a ntlm login prompt sphoradically, if we cancel the prompt we and reload the page we get the resultsen

could you please give more detail about the issue?
What kind of the workflow associated to the Library and what error you getting when trying to perform send to?
check ULS logs...
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Send E-mail not working???

I'm having issues with the "send email" button not working. When I test (F4) the functionality of a quiz inside captivate 5 & 5.5 and get to the end of the quiz I click the send email button and it opens my email with the results in the body of the email like its supposed to...but when I publish the course launch the published html file and then take the quiz when I click the send email button nothing happens (literally nothing). Am I missing something simple? I don't remember this being an issue in previous version...
Thanks for the help
B

Hi there
Please investigate the link below
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

HT4865 my message send tab is not working, any idea why please, thanks in advance,

My message tab to send is not working,I can type the message but when I press send it 's not working,
I don't remember doing anything to stop it, Can anyone advise me please, thanks you in advance,

If you have Settings>Messages>Show Subject Field set to On, you may be typing in the subject field of your message. The Send button won't respond until you type something in the iMessage field just below it.

TS4268 My iMessage send button is not working. How do I get it to work?

My iMessage send button is not working. How do I get it to work?

Hi,
You may have a virus on your PC. Review this NBC Nightly news article.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

" send link" is not working , when click on it, nothing happens, but Firefox 4.0 will work

File --> Send link will not work after Update Firefox 4.0 to 8.0
It is happening all the time.
Before update, the 4.0 version will work.

File --> Send link will not work after Update Firefox 4.0 to 8.0
It is happening all the time.
Before update, the 4.0 version will work.

"Send to Color" Not Working in managed clients with Open Directory

Similar Messages

Maybe you are looking for