Send to multiple participants

Activity A is in Role A. Activity B is in Role B which has 5 participants (a, b, c, d, e). Activity A is sent to 3 participants (a, b, c) of Role B. If one of the 3 participants receives the instance, this instance can only be assign to this participant. Other participants cannot assign this instance to themselves.
How to do this in BPM 10g?
Thanks.

Hi,
Not sure I followed what you're after, but it sounds like you want to assign the work item instance to be worked on in activity B by only 3 of the 5 people in the role.
If I've understood you correctly, you might want to use a parametric role for this since it lets you define a role that has subroles based on the value of a string variable. If you go this route, only the 3 people in the parametric role will see the instance. If one of the three assigns it to themself, the other 2 will no longer see the instance.
If you use a Multiple for this, each of the 3 would be assigned a copy of the instance, but even though one of the 3 assigns the instance to themself, the other 2 would still have it in their inbox.
Hope this helps,
Dan

Similar Messages

Same sender id for multiple participant trading partners

Hi All,
Although the scenario is little bit less common, but I have to model a Trading partner setup such a way that multiple participant trading partner will send document with same sender id but they will send the document for different unique receiver id. My question is the scenario can be supported in B2B.Thanks for your help.
Regards.

Hi,
As there cannot be two different person with same identity, similarly there should not be TP's with same Id otherwise you will not be able to identify that from whom you received the message and to where you want to send the message.
Anyways, your use case can be supported in Oracle B2B.
If you want to create multiple identities of a single host then it's very much supported in Oracle B2B.
if you want multiple hosts on same instance then it is possible by using HUB model . Please refer -
Can multiple hosts exist on single instance
I am not very sure whether you can have multiple TP's with same Id but as far as I know it is also possible with Oracle B2B.
Regards,
Anuj

Sending Instance dynamically to multiple participant.

I have a situation where the count of receiving participants will very from 1 to 5.
this.participant.next helps in sending instance dyanmically to a participant.
My question was, How do I send the instance dynamically to multiple partipants.
Please help

First thing that comes to mind is to utilize a SPLIT-N JOIN.
Put 1) an AUTOMATIC, and 2) the activity that needs to have multiple participants in between the SPLIT-N and the JOIN. In the code for the SPLIT, iterate over your variable that contains the counter of participants (intParticipantCount) and do the following:
1) set another variable for the desired participant (varParticipant)
2) clone the instance for as many particpants as you have.
In the code of the automatic, put the "participant.next" code and use your varParticipant
So if your process looked like the list below, and Activity 2 was the activity that needed to have a dynamic number of participants:
1) begin
2) activity 1
3) activity 2 (has dynamic # of participants)
4) activity 3
5) end
It would now look like:
1) begin
2) activity 1
3) SPLIT-N
4) Automatic (to set next participant)
5) activity 2
6) JOIN
4) activity 3
5) end
All of this assumes that Activity 2 needs to be completed by EACH user. If this is not the case...for example if you want to assign Activity 2 to a dynamic list of users (1-5) but you only want 1 user of the dynamic list to complete the activity, then I have no proven or tested suggestion, but you could perhaps look into seeing if you can 1) create parametric roles at runtime and 2)modify the members of the parametric role during runtime. if this is possible, then at runtime you would create a new parametric role, add the users to it, and set the parametric value. But this approach is all theoretical. Not sure if you can actually do that.

Message error when sending to multiple recipients/contacts

Ever since 3.0 I can't send messages to multiple recipients. I'm on Optus in Australia using a 16gb 3G.
Anyone else having this problem?
Any fixes?

Actually, just for an update, if I turn off MMS I can send to multiple contacts. But with MMS on, I can't. Am I the only person having this issue?
I've tried a restore, and set-up as new phone. But still having no success.

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

"Invalid address" only when sending to multiple addresses

I can send an email to <username>@gmail.com and to <username>@mac.com, but if I try to send an email to both recipients at once, my mail server says "Invalid address" even though my colleague can send an email to those addresses without a problem.
Since my colleague can do it, it can't be the server; but I can't figure out the difference between my Mail configuration and his.
Any ideas?

I found my own answer. I didn't have password authentication on for the outgoing server. Weird. I was able to send mail to individuals without a password, but couldn't send to multiple people.
It's working now.

My problem is that my iCal won't sync from my first-generation iPad to my computer, and the computer sends events multiple times back to the iPad... which is now full of duplicate events. I'm NOT on iCloud.

I'm just an old lady who doesn't know a lot about this stuff, but I do love my iPad and miss my portable calendar! My problem is that my iCal won't sync from my (first-generation, cheaper of the two models) iPad to my computer, and the computer sends events multiple times back to the iPad... which is now full of duplicate events. I'm NOT on iCloud. I've had this problem for nearly a year now. My Really Really Smart son couldn't fix it for me.

djb53 wrote:
Can take some time.... how much time?
There's no simple answer to that. My calendar goes back to 2004 and is moderately busy; it took around an hour. It's possible that you've hit a slow period on the server - it happens.
In order for it to work, your calendars should show on the MobileMe site, they should be listed under your MobileMe login name in the calendar list in iCal (calendars listed under 'On My Mac' will not sync) and your MM account details have to be entered in iCal Preferences>Accounts (this should have happened by itself).
If it's not working please see the page I linked to.

Why do my ical invitation acceptances send out multiple acknowledgements to the meeting intiator?

why do my ical invitation acceptances send out multiple acknowledgements to the meeting intiator?

Hi,
Welcome to the  Discussions
So we have DSL Modem <-> Base Station <-> Computer connected by Ethernet.
Is the Modem Routing ?
Is the Base Station set to "Share An IP" ?
(i.e are there two DHCP servers on your LAN ?)
Is Internet Sharing On in th G5s System Preferences > Sharing pane ?
In the Base Station is Port Mapping Protocol Enabled if it is doing routing ?
It is in the NAT tab of the Internet Pane.
Is the G5 also doing WiFi to the Base Station ?
Also check the Modem is not Blocking PINGS as this log shows no PING (But I am not sure it even got that far)
7:45 PM Thursday; February 18, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Native email sends message multiple times

Since I have updated to the new OS, the email app is now sending messages multiple times. When I initially send it, it appears to be unsuccessful, as it is in the Inbox with a red X. But the message is sent. The app keeps trying to send the "unsuccessful" message, and the recipient ends up receiving the same message more than once. Anyone else having this problem, or have an answer?

This issue has not yet been resolved in the below thread either.
http://supportforums.blackberry.com/t5/BlackBerry-PlayBook/E-mail-duplications/td-p/1675471
I would give rim a call to let them know of your problems.
If they can't track it they won't know how many users this is affecting. I imagine it will get solved a lot quicker if they know just how many users it's affecting.
Good luck

Cannot send invites to participants via Z 10

Hello,
I use Outlook 2010 for mail, calendar and contacts on my laptop (no server). If I use the BBLink calendar on my z10 to make a new appointment , it will be added to my Outlook calendar when I sync via USB, but I can't associate the BBLink calendar on the z10 with any email accounts and cannot send invites to participants. If I try to do associate an email account with the BBLink calendar from the z10, it tells me this has to be done on the laptop with which BBLink is managed. When I try to do so, there is no option to associate an email with this calendar account on the z10 . On the BBlink software in my computer I entered my blackberry ID and as well on my Z10/ .
If I make a new appointment using the local calendar on the z10, I can include other participants and they receive an invite. But when I sync to my computer, the new appointment made with the z10 local calendar does not sync to Outlook.
I have the latest software version on my z10 and on my computer
Please helpppppp….

On your Z10, to associate your Calendar with an email account, are you going to your Settings > Accounts > Set Defaults?
What choices do you have there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Sending to multiple people from smtp

Hi ,
How can i actually send to multiple ppl using utl_smtp ?
PROCEDURE send_test_message
IS
mailhost VARCHAR2(64) := 'mailhost.fictional-domain.com';
sender VARCHAR2(64) := '[email protected]';
recipient VARCHAR2(64) := '[email protected]';
mail_conn utl_smtp.connection;
BEGIN
mail_conn := utl_smtp.open_connection(mailhost, 25);
utl_smtp.helo(mail_conn, mailhost);
utl_smtp.mail(mail_conn, sender);
utl_smtp.rcpt(mail_conn, recipient);
-- If we had the message in a single string, we could collapse
-- open_data(), write_data(), and close_data() into a single call to data().
utl_smtp.open_data(mail_conn);
utl_smtp.write_data(mail_conn, 'This is a test message.' || chr(13));
utl_smtp.write_data(mail_conn, 'This is line 2.' || chr(13));
utl_smtp.close_data(mail_conn);
utl_smtp.quit(mail_conn);
EXCEPTION
WHEN OTHERS THEN
-- Insert error-handling code here
NULL;
END;
how shld i add into the recipient ??
i have tried
1 - '[email protected],[email protected]';
2 - '"[email protected]","[email protected]"';
both does not seem to work
kindly advise
tks & rdgs

You need to familiarise yourself with RFC821 - you'll find a copy at http://www.faqs.org/rfcs/rfc821.html
Do not confuse SMTP (an application protocol) with the way an e-mail looks. E.g. the TO and FROM fields in an e-mail can say anything and have no bearing on to whom the e-mail was send to, and from who it came.
Basically a "mail transaction" is a:
MAIL FROM - identifies the sender (can easily be spoofed)
RCPT TO - identifies a single recipient and can be repeated multiple times
DATA - submits the header and body of the e-mail
Read the RFC - it explains this in detail.

How can I send from multiple email aliases & names?

Hi, I wish to achieve the same result as the OP at http://forums.macrumors.com/showthread.php?t=112689 and by following the useful guides in that thread, am able to achieve what I want... sort of.
Basically, I have one POP account/mailbox, and only one.
However, I use 3 email aliases for different work purposes, e.g.:
Fred Blogs <[email protected]>
Dr F Blogs <[email protected]>
The Surgery <[email protected]>
Now, according to the advice, in Mail I can create one Mailbox, and under 'email address' in Mailbox Preferences, enter:
[email protected], [email protected], [email protected]
This works fine as far as it goes, and I get a drop down when creating new mail, however, all 3 'aliases' come from the same person's 'Name' - the 1 name I entered in the mailbox preferences in Mail.
No, what I need to achieve is to be able to send email from the 3 different names as well as email addresses, not just 3 different email addresses all with the same name.
This was a doddle under Outlook, you just create 3 accounts with the same SMTP server, but set 2 of them not to receive email (otherwise you'd end up with 3 lots of each incoming email from that 1 shared mailbox).
Mail however is not having any of it, and won't let me create duplicate accounts. I have even tried adding the full name in the email address field of settings, separated by commas: Fred Blogs <[email protected]>, Dr F Blogs <[email protected]>, The Surgery <[email protected]>. That didn't work either.
How can I achieve what used to be quite a simple process on my PC? I can't be the only person who uses one unified mailbox account, but sends from different aliases?
Thanks.

Thanks, but the issue occurs when I am trying to set up the 2nd account and get to the Incoming Mail Server Page.
Because I am using the same Incoming Mail Server and User Name as the 1st account, when I click Continue it reports:
/!\ The account "Account 1" already has this hostname and username.
It then won't let me continue. Now it sounds like you have the same setup, so do you have the same hostname and username in all your multiple accounts? :-S
The reason it does this is - I suspect - because even if you untick 'Include when automatically checking for new mail', when you manually check for new mail, you'd still get 3 lots of the same message. How do you get around this?

I record multiple tracks (3-5) from real instruments and vocals. I want to send these files to a collaborator to add more tracks to, but Garageband wants to mix these down (which I don't want). How can I send the multiple tracks files to my friend?

I record multiple tracks of real instruments and vocals wth Garage Band. I want to share the file with a collaborator so he can add another instrument or two. I have not found a way to do this without the process mixing down the tracks. I don't want them mixed down like when I send them to Itunes. Also I can't seem to just attach a file directly to an email for sending purposes. I thought I saw a method to do this with software instruments, but how do you do it with real instruments? I've tried every process on the "export" list to try to accomplish this, without success. Thanks for any breakthrough advice on this!

As isteveus said - for large projects uploading to a server would be best.
Also I can't seem to just attach a file directly to an email for sending purposes.
But for completeness's sake , you cou can mail a project, if you ctrl-click the project and use "Compress xxx.band". This will compress the project and create a zip file, that you can mail (if it is not too large). But ask your friend for the maximal file size allowed as a mail attachment.
But whichever method you use to share your project, be sure you include all loops and instruments, if your friend does not have the same JamPacks installed. You can bundle the loops into the project by saving it as an archive. "File > Save as" and check the "Archive Project" option.
If this option should be disabled, you can force it to become active by editing your project slightly. It is only available, if the project needs saving.
Regards
Léonie

Can i send to multiple email addresses for the same contact

I coach a baseball team and I want to create contacts under the kids' names with email addresses for both parents listed. Can I send email to multiple email addresses listed inside the same contact? I hope this makes sense.
Thanks!

You can do it individually, but it can also be done with Groups in Contacts, but you will need to create two or more groups. Once you have created the Groups in Contacts, drag the contacts that have multiple email addresses into each group. Then, select Edit Distribution List… from the Edit menu in Contacts.
For each group, select one address or the other for each contact. Do the same for the other group.
When you address an email, add both Groups to the address field in Mail.

How can I send to multiple address in one email?

In Outlook, I can send the email to multiple addresses by separating the emails with a semicolon. How can I do this using utl_mail?
Thanks!

Calling utl_smtp.rcpt multiple times.
[read more|http://download.oracle.com/docs/cd/A91202_01/901_doc/appdev.901/a89852/utl_smt9.htm#1000815]
Example:
DECLARE
    mailhost    VARCHAR2(64) := 'mailhost.fictional-domain.com';
    sender      VARCHAR2(64) := '[email protected]';
    recipient1   VARCHAR2(64) := '[email protected]';
    recipient2   VARCHAR2(64) := '[email protected]';
    recipient3   VARCHAR2(64) := '[email protected]';
    mail_conn utl_smtp.connection;
BEGIN
    mail_conn := utl_smtp.open_connection(mailhost, 25);
    utl_smtp.helo(mail_conn, mailhost);
    utl_smtp.mail(mail_conn, sender);
    utl_smtp.rcpt(mail_conn, recipient1);
    utl_smtp.rcpt(mail_conn, recipient2);
    utl_smtp.rcpt(mail_conn, recipient3);
    utl_smtp.open_data(mail_conn);
    utl_smtp.write_data(mail_conn, 'This is a test message.');
    utl_smtp.close_data(mail_conn);
    utl_smtp.quit(mail_conn);
END;
/Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com]
Edited by: Massimo Ruocchio on Dec 18, 2009 9:49 PM
Added example

Send to multiple participants

Similar Messages

Maybe you are looking for