Sender Cost Center may not be the same as Receiver Cost Center

Hello every body
I am trying to create a report that shows the hours that an employee has spend on an activity in a project.
Key Figure:
Hours
Characteristics:
Sender Cost Center (Employees Cost Center)
Receiver Cost Center
Activity code
What happens is that in some cases the Sender- and Receiver Cost Center do have the same value (are the same) in a row. The task in front of me is to exclude these rows from the query result.
One way to resolve the problem is to make a variable for each object; use replacement path and bring the values of their key into query as keyFigures; subtract one from the other, and use a condition that only allows values different from 0.
The problem is that the key value of the Cost Centers are not always numeric values (e.g. M10110). These values can not be a part of a subtraction.
I can resolve this issue by deleting the data in the cube and make a key Figure in update rules with values 0 (sdr. and rec. have different keys) and 1 (sdr. and rec. have same keys).
Does any one knows of a way to accomplish the result I need in BEx, so I can avoid deleting every thing in the cube?
Best regards
/FZA
Message was edited by: Fariborz Zangoui

Hello Roberto
Thank you very much for your help.
Some times it is difficult to search the forum if you do not know what you are looking for (in this case 'virtual key figure').
Best regards
/FZA

Similar Messages

I have moved my sdcard over to my samsung brightside phone. but the videos can not be read. Is there anyone out there whom may have experienced the same issue?

i have moved my sdcard over to my samsung brightside phone,. but the videos can not be read. Is there anyone out there whom may have experienced the same issue? I also tried transferring my files over to my pc first, then reformatted the sdcard, then transferred to the appropriate files back onto the sdcard and put back into samsung.

Thanks for the info SuzyQ. lorsa, the community is correct, pictures and videos can be saved differently on other phones. What phone did you remove the SIM card from? Where did you purchase your SIM card from? Your previous phones SD card and format may not be compatible with your Brightside device. I show you advise that you reformated your memory card but make sure the files are saved correctly. Listed below are the different type of files you can save, receive, and view for pics and videos with your device.
Files that are compatible with the Brightside device:
JPEG (*.jpg, *.jpeg, *.jpe)
BMP (*.bmp)
PNG (*.png)
GIF (*.gif)
3G2 (*.3g2)
3GP (*.3gp)
MPEG4 (*.mpg)
Please let me know if the information above helped with your issue. Please reach out to us if you have any questions or concerns. Make sure you always power cycle periodically. You may also need to peform a hard rest for your phone.
KinquanaH_VZW

I've had my iphone 5s since march 2014 and I've been using the same charger it came with. for the last two weeks ive been getting a message saying the accessory may not support the device. how is that possible?

How come I keep getting a message saying that the accessory may not support the device? I've been using the same charger that came in the box with the phone. Now it doesn't charge at all.

Then take the cable, the plug and your iPhone to an Apple Store genius bar it is still under the 12 month warranty

In CS6 my created and then saved jpegs do not have the same icon as jpegs I receive from others. Whe

In CS6 my created and then saved jpegs do not have the same icon as jpegs I receive from others. When attached to email they don't actually attach but appear embedded in the email and vertically squished. Any ideas?

It could be as simple as having two different file extentions jpg vs jpeg. As for the emails, that may depend on how you are attaching them to the email.
In most email programs you can open a new document then choose file attach or file import. Former would be attachments or links and the latter would be embedded.
On windows systems you can also send images to the email app, in the explorer right clicking and sending would open a small app that will resize the image to reduce the file size. This app could in theory squish the image.

How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file for

How do I resolve the issue Cannot open the file ".indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing , or the file may be open in another application?

Shouldn't the CC version be able to open any file created in an older version on InDesign?
Yes, it ought to.
If the older file wasn't yours (if someone emailed it to you,or burned it on a disc, or whatever), then I am almost willing to bet you a beverage in the city of your choice that it's not a complete InDesign file. That is, maybe it was zipped and renamed, or the beginning or end of the file was chopped off during download, or something like that. The only reason I'm not actually making the bet is that there is a remote chance that I'd lose, and maybe you're in Adelaide or Khabarovsk or somewhere where the cost of airfare to me would make that bet a very expensive bet for me to to lose. So no latte for you if I'm wrong!
The script that Jongware posted will tell you what version of InDesign made the file to begin with. Additionally, if someone did something like rename YourFile.PDF to YourFIle.INDD, it'll report that it's Not An InDesign File. Because while SpectrumPCS is kinda right and that message can be generated when attempting to open a CS5 file in CS3 or whatever, it also spits out the same message when you just try to open an Autocad file, or a Windows system file, or a PDF, or any file that InDesign actually cannot open at all.

You may not have the appropriate permissions to access the item fix.

So about 2 days ago after i downloaded and installed the iTunes update and when i tried to open it the next day it came up with
the error
"Windows can not access the specific device, file, or path. You may not have the appropriate permissions to access the item "and the parth was for c:\program files (x86)\itunes\itunes.exe.
But since I am the admin for my computer and only user thought it was weird. So look online and saw some topics but not a single one helped me. I gave access to all the folders, uninstalled everything apple and reinstalled still got the same error.
So I thougth it might be a virus or malware did a virus sacn nothing did a malware scan found some items removed them and still got the same error and even did system restore still same error.
I even made a new Admin accoung for my computer thinking mine had become corrupt but still same error. So I was at my wits end and had pretty much come to terms with the fact that I may not has access to itunes.
But i tried one last thing and this is the fix at least for me I installed itunes on an external hard drive then moved those files to my desktop. Here's excatly what i did.
1. I uninstalled itunes from my computer.
2. Plugged in external HD and made a new folder named it iTunes.
3. Ran iTunes setup and when it asked where to installed the files I chose my external HD which for me was the G drive and installed.
4. After iTunes was installed I viewed the files in my external HD and chose the iTunes folder and chose CUT.
5. I then pasted that to the desktop after that I just opened the folder and chose the iTunes applcation and to my surprise it opened with out a hitch.
You have to move the folder out of the external HD because if you don't and you unplug the HD it won't open unless the HD is plugged in.
Sorry for the supe long post but I just wanted to share my fix for this annoying problem so other people may try it and see if it works for them .

boatwreck,
Welcome to Lenovo Forums !
Thank you for taking time to post your inquiry. I would like to share with you information on .temp.exe
Description: Temp.exe is not essential for Windows and will often cause problems. Temp.exe is located in a subfolder of "C:\Documents and Settings". Known file sizes on Windows 8/7/XP are 386,048 bytes (50% of all occurrences) or 13,880 bytes. http://www.file.net/process/temp.exe.html
The program has no visible window. The Temp.exe file is not a Windows core file. Therefore the technical security rating is 61% dangerous.
If Temp.exe is located in a subfolder of "C:\Program Files", the security rating is 50% dangerous. The file size is 253,952 bytes. The program has no visible window. The program is loaded during the Windows boot process (see Registry key: Run). The file is not a Windows core file.
If Temp.exe is located in C:\, the security rating is 74% dangerous. The file size is 19,456 bytes. The file is a file with no information about its developer. The program is not visible. The Temp.exe file is not a Windows system file. The process listens for or sends data on open ports to a LAN or the Internet.
If Temp.exe is located in a subfolder of C:\Windows\System32, the security rating is 52% dangerous. The file size is 83,968 bytes.
Source : click on this link
I hope that this can help
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

The executible I build with the application builder does not function the same as my VI file.

I am using a USB 6008 device with the newest DAQmx drivers and Labview
8.2 to make analog voltage readings. Within my main VI I first
create a data folder in the same location as the VI using a property
node and then use case statements to call two sub VIs that create a
data file within the data folder and then collects data. When I use the
application builder to create an executible the resulting file does not
operate the same as the origional VI. The program appears to be
reacting to button presses on the GUI, but there is no indication that
the data folder is being created or that any measurements are buing
made. Are there any known issues that may account for this
anomily?
-Mike
Message Edited by TMBurleson on 10-16-2006 03:09 PM

Are you using the VI Path property, using a reference to the current VI?
I could be wrong, but if you're attempting to use a path relative to the current VI, I think that does indeed change in a built application. If your VI used to be C:\somewhere\foo.VI, then after building its path would actually be C:\somewhere\foo.EXE\foo.vi . Thus, if foo.VI used to try to make a folder like C:\somewhere\datafolder, the built application would be trying to make C:\somewhere\foo.EXE\datafolder , which wouldn't work.
This is sort of a shot in the dark, but does this sound like it might be the case?
EDIT: Dennis beat me to it.Message Edited by kehander on 10-16-2006 03:26 PM

Items such as emails do not look the same in Firefox on my tablet as they do on my computers?

i have installed Firefox on my new Android Tablet. However, when I am reading an email (in Yahoo), it is all bunched together rather than being in different paragraphs and headings. I have checked Request Desktop Site but see no change. Thanks

Hi wolfdad,
This is the server sending you a mobile page or site overriding the requested Desktop site unfortunately. You can try to reload the page with desktop site checked again as well. Some servers have different versions for different devices like gmail and its not always the same.
If it is a compatibility issue please check out [http://webcompat.com]

Table is not in the same position form 1 page to next

Hi,
Following my earlier posts regarding my website and the lack
of text. I thought if I created a new index page with text and and
enter site button this would go some way to sorting out the
problem. The problem now is that the indes page table is not in the
same plase as the tables on the other pages. Any assistance on
getting these lined up would be much appreciated.
The URL for my site is:
http://www.martingreshoff.co.uk
The code for my new index page is as follows:

What are these (on the linked page)?
<a href="#" onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('Image8','','Resourses/Images/Gallery
Free
Second.jpg',1)"></a><a href="#"
onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('Image9','','Resourses/Images/Gallery 3
Fitted
second.jpg',1)"></a><a href="#"
onMouseOut="MM_swapImgRestore()"
onMouseOver="MM_swapImage('Image10','','Resourses/Images/Gallery 4
Box
Second.jpg',1)"></a>
If you had a menu row at the top of the table on this page,
like you do on
the other pages, the table would be in the same place. Just
put an empty
row up there....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"greshoff" <[email protected]> wrote in
message
news:[email protected]...
> Hi,
>
> Following my earlier posts regarding my website and the
lack of text. I
> thought if I created a new index page with text and and
enter site button
> this
> would go some way to sorting out the problem. The
problem now is that the
> indes
> page table is not in the same plase as the tables on the
other pages. Any
> assistance on getting these lined up would be much
appreciated.
>
> The code for my new index page is as follows:
>
> <meta name="keywords" content="timber, furniture,
wood, quality, hand
> crafted,
> custom made, free standing, bespoke, fitted furniture,
man made boards,
> fine,
> furniture maker, cabinet maker, wooden, tables, chairs,
bookcases, boxes,
> decorative boxes, craftsman, greshoff, Greshoff,
commissions, wood
> veneer,
> Martin">
> <meta name="description" content="Martin Greshoff
furniture maker with
> examples of free standing, fitted furniture &
decorative boxes in solid
> timber
> & man made boards"/>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <link rel="shortcut icon" href="favicon.ico" >
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
> <style type="text/css">
> 
> </style></head>
>
> <body>
> 
> 
> 
> <table width="733" height="475" border="0"
align="center"
> background="Resourses/Images/Home_Page.jpg">
> <tr>
> <td height="471" align="right" valign="top"> class="style2"> 
> class="style4">MARTIN
> GRESHOFF is a furniture maker who
produces 
> one off pieces of bespoke custom made furniture to 
> the highest standards of
>
craftsmanship.
> Inside you will find some
examples of some of
> the
> 
> commissions I have undertaken. 
> The following galleries are
included: 
> Free Standing
> Furniture with examples of
bookcases, 
> cabinets, tables, chairs, cupboards, cabinets and a
display case.
> 
> Fitted
Furniture with
> examples of a library, kitchens 
> and a dressing room.
> Decorative Boxes
with
> examples of Jewellery Boxes 
> with inlays & lift out trays and small trinket
boxes
> Press
with some of the
> published work relating to 
> Martin Greshoff Furniture.
> <img
> src="Resourses/Images/Enter_Site1.jpg" width="166"
height="39" border="0"
> usemap="#Map" />
> </td>
> </tr>
> </table>
>
> <map name="Map" id="Map">
> <area shape="rect" coords="1,-2,165,38"
href="Home.html" />
> </map>
> 
> <script type="text/javascript"
language="javascript">
> var sc_project=2215289;
> var sc_invisible=1;
> var sc_partition=20;
> var sc_security="dc3fe825";
> </script>
>
> <script type="text/javascript" language="javascript"
> src="
http://www.statcounter.com/counter/counter.js"></script><noscript><a
> href="
http://www.statcounter.com/"
target="_blank"><img
> src="
http://c21.statcounter.com/counter.php?sc_project=2215289&java=0&security=d
> c3fe825&invisible=1" alt="web site hit counter"
border="0"></a>
> </noscript>
> 
> <script
type="text/javascript"
> src="
http://www.ritecounter.com/c/47/46578.js"></script><noscript><a
> [links to
> '
http://www.ritecounter.com/c/47/46578.js"
> href="
http://www.ritecounter.com"><img
[links to
> '
http://www.ritecounter.com"
> src="
http://www.ritecounter.com/scripts/htmlc.php?id=46578
[links to
> www.ritecounter.com/scripts/htmlc.php?id=46578]"
alt="Simple Invisible
> Counter"
> border=0></a></noscript>
> </body>
> </html>
>

The item referred to by this shortcut cannot be accessed. You may not have the appropriate permissions

Hi
I originally posted this in the Windows 7 Networking forum and they advised to post it here.
We use Windows 7 SP1 clients with Roaming Profile and Folder Redirection and they are connected to a Windows 2008 SP2 server. We are getting issues when someone tries to open files on their redirected Desktop and they get the message "'The item
referred to by this shortcut cannot be accessed. You may not have the appropriate permissions" if you click browse it then defaults to a different users profile. If you click through the errors the file eventually loads. If you open Word from
the Start menu and then browse to the file it opens fine. We have found that deleteting the Normal.DOTM file sometimes fixes the error, but only seems effective 50% of the time. This doesn't happen for all users, and seems to occur in small
groups and not all the time. We have also had the same message come up with someone trying to open Word files an online learning resource we have created.
There are a couple of events showing for about the time the error occured they are:
Type Error Source Application Error Category Name 100 Event 1000
Faulting application name: WINWORD.EXE, version: 14.0.4762.1000, time stamp: 0x4bae25b7
Faulting module name: wwlib.dll, version: 14.0.4762.1000, time stamp: 0x4bae2623
Exception code: 0xc0000005
Fault offset: 0x00034b81
Faulting process id: 0x1734
Faulting application start time: 0x01d0234ef75c42aa
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office14\WINWORD.EXE
Faulting module path: C:\Program Files (x86)\Microsoft Office\Office14\wwlib.dll
Report Id: 6f74438b-8f42-11e4-9e45-00c2c6506cb5
Type information Source Office Software Protection Platform Service Category Name 0 Event 1003The Software Protection service has completed licensing status check.
Application Id=59a52881-a989-479d-af46-f275c6370663
Licensing Status=
1: 1f76e346-e0be-49bc-9954-70ec53a4fcfe, 1, 1 [(0 [0x00000000, 1, 0], [(?)(?)( 1 0x00000000 30 0 msft:rm/algorithm/hwid/4.0 0x00000000 0)(?)(?)(?)])(1 )(2 )]
2: 9da2a678-fb6b-4e67-ab84-60dd6a9c819a, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
3: dd457678-5c3e-48e4-bc67-a89b7a3e3b44, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
The software protection message we get in clusters of about 6 or more multiple times through the day

Hi
An update. We have approx 400 people with roaming profile/folder redirection on Windows 7/2008 and this only seems to have occurred to about 15 people, and then seems to clear up for a period and then happens again. We also have a similar number
of people with roaming profile/folder redirection on Windows 7/2003 system and we haven't had a report of this issue happening on this setup.
So far we haven't been able to replicate the issue using a test account, so are struggling to find out what is causing it and why it is so random.
Regrds
Dave

I am a teacher with 7 iPads for my room with no VPP or Apple Configurator. May I use the same Apple ID for each of the devices with a separate password for each device?

Who can help me with the above question? Multiple iPads in one classroom: may I use the same Apple ID (which is my work email) for each iPad, and construct a separate password for each device? My school does not have VPP or Apple Configurator

Password to what, exactly? If you're referring to the screen lock, each iPad can have a separate passcode, since that's not tied to an Apple ID. If that's not what you mean, please post back and clarify what password you're referring to and what you wish to accomplish.
Regards.

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.

If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser?

Error in Acrobat 8: An error exists on this page. Acrobat may not display the page correctly...?

Hi,
We perform the e-signing on any PDF using our custom e-signature plug-in. Once that's done, when we try re-opening the PDF in Acrobat version 8.0.0.0, we get the following error:-
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem"
Please note that this error occurs intermittently and is NOT observed in Acrobat 7 or 9. Also, when a plain PDF is opened (i.e. a PDF without any signature on it) then there is NO error.
Could you let me know what could be the issue here? I read it in Acrobat 8.1.3 release notes that such an error was a known bug in version 8.0.0.0 (http://kb2.adobe.com/cps/407/kb407016.html), but I am not sure of its cause.
Let me know your comments/suggestions.
Thanks!

I am getting the same error even in Acrobat version 8.1.3.
Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
Code 4002: PDF content contains erros.
However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
Awaiting reply!
Regards.

HT204406 I have subscribed to match on iTunes and organized my music on my Mac Book. Why does it not appear the same way on my iPad

I would like my music to appear organized in the same way on my iPad as I have done it on my Mac Book. (and on my iPhone as well) Since it is in the cloud, why does it not appear the same way in all devices?

The purpose of iTunes match is to make your music library available to all of your devices anywhere. It will sync Playlists, but no other type of organization you may have made.
If you're having trouble, be sure you are logged into the same Apple ID on all devices but be sure to read this article and pay special attention to associating your devices with an Apple ID. There are important restrictions you should know about.

Sender Cost Center may not be the same as Receiver Cost Center

Similar Messages

Maybe you are looking for