Sender File Adapter Bespoke Module Development

I have been following the How To ... Create Modules for the J2EE Adapter Engine to create a bespoke module for the Sender File Adapter.
Initially all the module does is write a message to the Augit Log. The module has been deployed to XI successfully. When I add the module to the sender file adapter the adapter is green in the adapter monitor but I get the following message in the message monitor ....
"Attempt to process file failed with Path to object does not exist at com.kk.FileAdapter, the whole lookup name is localejbs/sap.com/com.kk.FileAdapter/WriteToLog."
com.kk.FileAdapter is the package. All of the required files have been built as per the How To pdf.
Does anyone have any ideas??

Hi Satish,
Thanks for the quick response.
Using the fully qualified name I get the following error in the adapter monitor.
"Last message processing started 18:32:11 2005-09-19, Error: Module Exception 'com.sap.aii.af.mp.processor.ModuleProcessorException' found, cause: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at BANKSenderFileAdapterEAP, the whole lookup name is localejbs/sap.com/BANKSenderFileAdapterEAP/WriteToLog."
If is use the JNDI name I do not get an error in the Adapter Monitor but get the following error in the Message Monitor.
"Attempt to process file failed with Path to object does not exist at BANKSenderFileAdapterEAP, the whole lookup name is localejbs/sap.com/BANKSenderFileAdapterEAP/WriteToLog."
The rest of the message seems to be successful, only the run of the module.
Any ideas??
Many thanks
Gary

Similar Messages

FileName in Sender File Adapter Module

Hi Folks,
In my sender file adapter have written a module to read the picked file name. The protocol used is NFS.
Notice that the file name read in the module has the absolute path, including the directory path. E.g The file name xyz has to be picked from source directory
XIServer\Outbound. In the module when I retrieve the file name, it comes up as
XIServer\Outbound\xyz. Is this expected behaviour?
I was expecting just the file name<xyz> to be retrieved.
Thanks,
Anand

HI,
Create an UDF and write this code.
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key =
DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
in Adapter u will have Adapter specific parameters check the file name check box.
Using this UDF u will get the file name at target side.
Regards,
Phani.

Module processing inside Sender File Adapter

Hello,
I am trying to analyze whether I can create a specialized module inside Sender File Adapter. As of right now, the Sender File Adapter and Receiver as well, assume endSeparator character in the end of each record. For files that do not have this field, it is just on continuous string, I assumed I can create an
     adapter module
     call it BEFORE data in the file is being converted to XML format
     Insert 'nl' character (since the record length is fixed)
     Call regular adapter processing (converting to/from XML)
    However, creating any module inside Sender File Adapter, the payload of the main document is already in XML format. Is there anyway to avoid it?
   Thanks for your help,
         Dmitriy Mindich

It is not possible with the standard functionality.
So maintain the sender file adapter with no conversion, but in the module tab enter following modules:
1. Your module
2. The conversion module (*)
3. The standard module.
(*) for details look here:
Look here:
http://service.sap.com/nw-howtoguides
-> Exchange Infrastructure
-> How To Use the Content Conversion Module in JMS Adapter
Regards
Stefan

Sender File Adapter : File Name Determination

Hi All,
My Scenario :
1) Im my scenario i need only the "FileName" of the File when picked up by the Sender File Adapter.
2) Rest Content of the File need not be in the XML file format.
Now what i did was developed "File Adapter Module " to get the "FileName" when picked up by the Sender File Adapter.
Outcome : When i put the developed module at first and put the file in specified folder allowint the Sender file Adapter to pick up. Now Everything is fine working when one kind of File is placed as per my Content Coversion paramaters.
Actual : My Client would place file of any kind (.jpeg -> Mostly , gif ) i need to get only the file name in the Outbound interface , which i would split it further to my Target Interface.
How could i achieve this , when i took away this content conversion , in sxmb_moni it shows error.I need only the filename in the Outbound not the Content , moreover the hit is i donot know what could be content of my file as it could be different and varing , so i could not set particular content conversion paramters:
Second Question:
Now my outbound XML interface looks as below when i test with a file , with proper content conversion paramerters:
<?xml version="1.0" encoding="UTF-8" ?>
- <MT_DMS_FINAL>
- <Record>
- <Row>
<FirstName>2323_eer_rtr</FirstName>
</Row>
</Record>
<FileName>d:\mdmtest\srinivaS\padusrini.txt</FileName>
</MT_DMS_FINAL>
Well i have designed in my MI only FirstName , how to capture this element "FileName" which i can use it in mapping , if i have to write any UDF to capture it ,please guide me.
thx in advance for u r help
with regards
Srini

Hi Guys ,
Can i use File Content Conversion for .pdf document , my pdf doc content is not known, means it"s a complete info doc.I may get .jpeg any picture or drawing.
I thought i can use below file content conversion paramters:
Document Name : MT_DMS_FINAL
RecordSet Name : Record
RecordSet Structure : Row,*
Row.fieldNames - FirstName
Row.fieldSeparator - ;
Row.processFieldNames - fromConfiguration
Row.additionalLastFields - ignore
Row.missingLastfields - ignore
Now i put a pdf doc of unknown content , and my assumption was some set of charater would be dumped in XML and rest would be ingonered which is least bothered part in my scenario , unless i get the filename from runtime ot Adapter module developed
But in RWB CC monitoring i see below error :Error: org.xml.sax.SAXParseException: Illegal XML character: .
Any views on this , can any one help me out with the above requirment. Hope u guys got wat am trying to put out here
thx in advance for u r help
with regards
Srini

Dynamic file Directory : Sender File Adapter

Hi all
In one of our interface development ,at we require a dynamic Directory path at the sender file adapter ..
ex :
path = Root/A/B/C
filename = test.txt
now in Root Directory, Folder & subfolder " A ( B ( C ))) are dynamic.
Subfolder "C" wil contain the source file..
Will it possible...with Z module development..??
Regards,
Ashutosh

hi,
if you want your directory name dynamically from Payload, you can use the option variable substitustion;
For example follow below procedure:
1)in the Target directory name --> /%dir%
2)go to advanced tab and check for the variable substitution option(enable),
3)variable name:dir
Reference:Payload:mt_filetest,1,name,1
according to the given details in the communication channel your payload should be like this
<?xml version="1.0" encoding="UTF-8"?>
<ns0:mt_filetest xmlns:ns0="urn://filetest">
<name>madhav</name>
</ns0:mt_filetest>
now directory is created with the name of madhav (Dynamically according to the payload directory name is created).
Note: points if it is useful
Thanks
Madhav

Send a mail if no file in Sender File Adapter

Hello guys,
I have one doubt. I have a sender File adapter with FTP transfer protocol. I want to pull the file every 24 hours. If the file does not exist, there is any way to have an error and send a mail to the client?
Is a requierement to do one interface, they want that XI sends a mail if no file is encounteref in the server when XI goes to pull the file. Is this possible?
Many thanks in advance.
Regards,
Xavi.

Hi,
Refer to following link
Read Excel instead of XML through FileAdapter
This has good example of developing module. Only code is available. For further help you can look in Help.sap for crating module they also provide sample code.
No need to call alert from module . go upto 24 hars if no file is received set your own structure.
Give condition in receiver detrmination to send mail if file is not picked.
revert back for any clearity.
Thanks
Sunil Singh

Errro when referring a Bean in Sender file adapter

Hi
I have created a sample code and deployed in the server and when i refer that in the sender file adapter module processor using the naming format
localejbs/sap.com/com.vas.mod/GetFileNameBean
where
com.vas.mod is the EAR Project name
GetFileNameBean is the Bean name
I am getting the erro in the XI Adaptor monitor as follows
- 2006-07-31 13:06:51 UTC: Error: NameNotFoundException: Path to object does not exist at com.vas.mod, the whole lookup name is localejbs/sap.com/com.vas.mod/GetFileName.
I checked theJNDI name in the server it is exactly the same.
can some one help me on this please?
vasagam R K

Hi Vasagam,
Please check these threads..
They deal with ur question...
NameNotFoundException during JNDI lookup for Deployable WebService Proxy
Strange Lookup Error (SAP Resource Adapter)
cheers,
Prashanth
P.S Please mark helpful answers

.xls ,.xlsx, .xlsm in sender file adapter

hi guys,
I have written an adapter module to read an excel file in sender file adapter...
if the input file comes as .xlsx or .xlsm wll it be able t read the same?
or do i have to change anything in the module code?
filename in sender cc is filename.*
Regards,
Teja

Hi Gurus,
How can we download data from SAP internal table to Excel file in .XLSM format?
file is having macros and header, i need to append the values from internal table to the excel file from 6th row(5 rows contains header).
when i try to use " gui_download " FM , status message in sap shows as no.of bytes transfered! but , while oppening the file it is showing currupted.
When i try to use OLE Method it is creating the file in xlsx format in stead of xlsm.
can any one please guide me how to proceed!!
Regards,
Balaji

KeyFieldValue in Sender File Adapter Not Working

Hi,
I have a flat file like this...
1Field1Field2Filed3.....
2Field1Field2Field3....
1Field1Field2Filed3.....
2Field1Field2Field3.....
1Field1Field2Filed3.....
2Field1Field2Field3....
My requirement is to pick only lines starting with '1'.
I have configured the Sender File Adapter like this,
Recordset Structure : SOURCE,*
Key Field Name: KF
Key Field Type : String(Case-Sensitive)
File Content Conversion:
SOURCE.fieldFixedLengths 1,5,5,5....
SOURCE.fieldNames KF,FIELD1,FIELD2....
SOURCE.keyFieldValue 1
After all this, still it picks up all the recored instead of records starting with '1'. Can any one solve this?
Regards,
Sreedhar

If you feel module processor is bit tough you can use XSLT Mapping which is simple in sloving ur problem.
Check this blog to do a sample example using module processor.
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
To implement the above check this link....
https://websmp201.sap-ag.de/~sapdownload/011000358700003237612005E/HowToCreateAdapterModules.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e21106cc-0c01-0010-db95-dbfc0ffd83b3
http://help.sap.com/saphelp_nw04/helpdata/en/8b/895e407aa4c44ce10000000a1550b0/content.htm
/people/gowtham.kuchipudi2/blog/2006/01/13/stop-creation-of-an-empty-file-from-file-adapter-using-module

Sender File Adapter - Content Conversion

HI Friends,
I got a scenario where I need to convert the File to XML document through Sender file adapter..
My file looks like below.
BATCH1234........
12DASER123142JMM
237DSAFDLKC839890
45SDFLASJ90011
BATCH3455...
132FGAR
SD21352525
BATCH998898...
123145DSRTW
12FSTS
So there is a Header and Body for each record set..
My XML Structure is as follows.
<TimeStructure>
<TimeRecord>
 <ControlRec>
 <Field1>BATCH </Field1>
 <Field2> ...</Field2>
 </ControlRec>
 <DataRec>
 <F1> ...... </F1>
 <F2> ...... </F2>
 </DataRec>
</TimeRecord>
<TimeRecord>
 <ControlRec>
 <Field1> BATCH </Field1>
 <Field2> ADFAS </Field2>
 </ControlRec>
 <DataRec>
 <F1> ...... </F1>
 <F2> ...... </F2>
 </DataRec>
 </TimeRecord>
</TimeStructure>
The blog <a href="/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem:///people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
is somewhat relevant to my requirement.
But the problem is I have the keyfield "BATCH" for my header file but don't have any key field in the data record of the input file.
Please help me out how to mention the configuration parameters.
Regards,
Kumar

Hi,
If you don't have constant key value for your detail records, then you can not directly get the required xml.
So in this case, you can read all the records in a common Row model, i.e each record will be considered as a one row with all the values, and then split this row with Substring or java functions in the mapping.
Even you can do this in the Adapter module .
If you have key value for each record to identify then you can try with content conversion.
Regards,
Moorthy

Sender File Adapter Problem when text document is a single line.

Hi All,
I have posted this question earlier too. But did not get a proper answer.
I am using File adapter to fetch data from a file system.
My input data is: AA123BB45678AA345BB78564.
It is just reading the first segment i.e.AA123 and not reading the remaining.
How can I configure my Sender File adapter to pick this pattern of data? It works fine if I have line break after each record that is if the input is as below.
AA123
BB45678
AA345
BB78564
In the above there is a Line break after each segment. So File adapter picks it fine.
I have also tried using xml.A.endSeparator equals to blank in the module configuration. But it does not work either.
Can anyone throw some light to this?

Abhi
I tried a different approach to send your file data In..
You can get each line in the source structure in separate row as
<?xml version="1.0" encoding="utf-8" ?>
- <ns:SingleRowDT xmlns:ns="http://xxxxx.com/xi/pocs/sriram">
- <Recordset>
- <row>
<rowElt>AA123BB45678AA345BB78564</rowElt>
</row>
- <row>
<rowElt>AA123BB45678AA345BB78564AA123BB45678AA345BB78564</rowElt>
</row>
- <row>
<rowElt>AA123BB45678AA345BB78564AA123BB45678AA345BB78564AA123BB45678AA345BB78564</rowElt>
</row>
</Recordset>
Now you can use a suitable mapping logic to split the individual records into the 2 field structure as expected in the target..
Trying your way would be a limitation on file adapter I think..Let me know if this helps..I can give you the content conversion config for this model..
its simply
RecordSet - Leave it empty
RecordSet Seq - Row, *
Recordsets/msg - *
row.fieldSeparator - 'nl'
row.endSeparator - 'nl'
row.fieldNames - 'rowElt
..So each line will be pulled into a single Row in the source structure and then u can apply a specific mapping to split into 2 fields for your target
Regards
Sriram V.
Regards
Sriram V.

Sender File adapter FCC

Hi
I have an excel file which I save as a csv extension. If I use FCC in Sender File Adapter, I need to add a module in my communication channel. Can anyone provide me with that?
Is this module generally deployed on XI server beforehand or do I have to write a java code and deploy it myself?
I have already had a look at this blog
/people/sap.user72/blog/2005/07/04/read-excel-instead-of-xml-through-fileadapter
Vaibhav

You will have to create a module in this case.there is no standard module available for this fuctionality as of now.
Ref: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02706f11-0d01-0010-e5ae-ac25e74c4c81 to help create a module.

Sender File Adapter FCC to Hierarchial MT Coversion

Hi,
   I have MT with structure as follows
Header               1..1
    F1          string 1..1
    F2          string 1..1
    SUB              1 to unbounded
       S11       string 1..1
       S12       string 1..1
Can you anybody help me out how to convert the a CSV file to Convert the structure mentioned above using sender File Adapter FCC.
Regards,
Daniel.LA

Hi,
There is no suc h direct way to get the data from csv fiel with conversion.
Either you can use JAVA Mapping for it or use the adapter module to read csv files.
How to process CSV data with XI file adapter
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
"JAVA MAPPING", an alternate way of reading a CSV file
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
There is one way that you could bypass IR (Integration Repository) for any type of files, see below link
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
Making CSV File Lookup Possible In SAP XI !!!
/people/sundararamaprasad.subbaraman/blog/2005/12/09/making-csv-file-lookup-possible-in-sap-xi
This will help you
Thanks
Swarup

Sender File Adapter with file conversion

Hi guys,
Im using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
An example:
value1 value2 value3
I want to ignore value 2 but I cant find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
Thanks in advance,
Ricardo.

hi,
there always is another way:)
you can import the whole line to one field
and cut it inside the adapter module
(then you can define start and stop of the substring that you need to use)
but of course it's not standard even though it's quite easy to achieve in java
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Read uniquely named file. Sender File Adapter unsuitable for synchronous

Hi All,
We have a requirement to read a specific file that has a unique name based on a transaction ID. The transaction ID will be passed from the source application.
The communication is required to be synchronous. There could be multiple requests/files generated and present at the directory at any given time but each corresponding to a specific transaction ID. If the file is not yet generated for that transaction ID we return back an error to the calling system.
I think we can not use Sender File Adapter - because of the dynamic naming and also because we have to return a synchronous response back depending on the file availability. i.e. We can not have a defined pattern in the file name nor can we specify a wild card as there could be more than one files in the location.
In theory we could use the File Sender adapter to read all the files in the directory and a BPM with correlation set based on the transaction ID and let the process wait for the request. But as far as possible I want to avoid this unnecessary wait or extra demand on the system. More so because the files could get big.
If I were using a tool like SAP Business Connector or webMethods then I would I used a readFile Java service and given it a filename to return the required bytes in a synchronous read.
Is something like this possible in XI? If someone has written a synchronous Java to read file can they share the code? Or do you suggest I write a ABAP server proxy to read the file? The problem however will be how do we map the data to a XML within the code.
All suggestions welcome. There has to be a simple and effective solution to this mundane requirement !
Wishing all SDNers a bright start to this new year,
Thanks,
Charu
Message was edited by:
Charu Kulkarni
"The transaction ID will be passed from the source application so we know what file to pick"

Hi,
You could make the scenario a little simple and avoid custom development if the logic can be put into scripts(out of XI).
Say all the files are coming into a directory called D1.
Here, you could use a script to arrange all these in an order (say ascending) and move the first file into another directory D2.
The sender file adapter would poll this directory D2. The adapter can have a wild card character for the filename field now.
Once the file is in XI, you could check this against the transactionId present(I am not sure how you get this though!), and determine whether to send a mail, or to send a file back.
Here, I have assumed that there is somekind of order present in the files placed in the directory D1.
Again, this is just a suggestion.. I might be wrong with all the assumptions.
Regards,
Smitha.

Sender File Adapter Bespoke Module Development

Similar Messages

Maybe you are looking for