Sender File Conversion
Hi guys,
I'm having quite a hard time in mapping a Text File into XI XML structure.
I've the following structure:
mtTest
RECORD (0....unbounded)
DATA ( 1 )
ROW (0 ...unbounded)
and a text file:
015007V30147425 0018002 20071215
015007V30157077 0018002 20071215
015007V30144521 0019267 20071107
015007V30150817 0019267 20071207
I've read some blogs related this particular question and there's one which caught my attention, "Generic Sender File CC Adapter". It's really similar, except the output.
With the Sender file adapter configs as follows:
RecordSetName: RECORD
RecordSetStructure: DATA, 1
Properties:
DATA.fieldSeparator 'nl'
DATA.keyFieldValue *
DATA.fieldNames ROW
DATA.endSeparator 'nl'
I was expecting a message with one record "RECORD", one "DATA" and several "ROW".
Instead, I have one "RECORD" and one DATA/one ROW for each line. Meaning 4 DATA/ROWS instead of one DATA/four Rows.
Can you help on that?
Hi VJ,
But then I'm obliged to place:
Mandatory parameter 'ROW.fieldNames': no value found
and I don't have no more fields in ROW, because ROW is a string...
Do you have any ideas?
Similar Messages
-
File Sender Content Conversion: Help needed
Hello Experts,
i need help with file sender content conversion:
i have a file which looks like this:
12329460 24.01.09/07:01 167 Y010122851 136086 43300007 E70115 1L2_96_1
12329660 25.01.09/07:02 157 Y010122851 136086 43390007 E711J5 1L2_96_1
as you can see 8 fields, separated with whitespaces
and i want and xml file which looks like this:
<DT_DATA_FILESENDER>
<Recordset>
<Data>
<field1>12329460</field1>
<field2>24.01.09/07:01</field2>
<field3>167</field3>
<field4>Y010122851</field4>
<field5>136086</field5>
<field6>43300007</field6>
<field7>E70115</field7>
<field8>1L2_96_1</field8
</Data>
<Data>
<field1>12329660</field1>
<field2>25.01.09/07:02</field2>
<field3>157</field3>
<field4>Y010122851</field4>
<field5>136086</field5>
<field6>43390007</field6>
<field7>E711J5</field7>
<field8>1L2_96_1</field8
</Data>
</Recordset>
Would you please let me know how the datatype has to look like?
And especially how the FCC has to be configured for this scenario?
Thanks in advance,
Chris> With fixed lengths i get it working,
>
> but with de fieldseparator 0X09 it does not work,
> would you please tell me the complete FCC config not only the fieldSeparation line?
Well Christian,
There is one thing, eithere you can use fieldSeparator or fieldFixedLengths you can not use both together. So in your case do not use fieldSeparator.
The complete FCC is almost same as given in the blog in my previous reply. See the final output in that blog and create your data type accordingly. e.g.
Recordset
------Item 0...unbound
--------Field1 0..1
--------Field2 0..1
--------Field3 0..1
--------Field8 0..1
Regards,
Sarvesh -
Sender File Adapter - Content Conversion
HI Friends,
I got a scenario where I need to convert the File to XML document through Sender file adapter..
My file looks like below.
BATCH1234........
12DASER123142JMM
237DSAFDLKC839890
45SDFLASJ90011
BATCH3455...
132FGAR
SD21352525
BATCH998898...
123145DSRTW
12FSTS
So there is a Header and Body for each record set..
My XML Structure is as follows.
<TimeStructure>
<TimeRecord>
<ControlRec>
<Field1>BATCH </Field1>
<Field2> ...</Field2>
</ControlRec>
<DataRec>
<F1> ...... </F1>
<F2> ...... </F2>
</DataRec>
</TimeRecord>
<TimeRecord>
<ControlRec>
<Field1> BATCH </Field1>
<Field2> ADFAS </Field2>
</ControlRec>
<DataRec>
<F1> ...... </F1>
<F2> ...... </F2>
</DataRec>
</TimeRecord>
</TimeStructure>
The blog <a href="/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem:///people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
is somewhat relevant to my requirement.
But the problem is I have the keyfield "BATCH" for my header file but don't have any <b>key field in the data record</b> of the input file.
Please help me out how to mention the configuration parameters.
Regards,
KumarHi,
If you don't have constant key value for your detail records, then you can not directly get the required xml.
So in this case, you can read all the records in a common Row model, i.e each record will be considered as a one row with all the values, and then split this row with Substring or java functions in the mapping.
Even you can do this in the Adapter module .
If you have key value for each record to identify then you can try with content conversion.
Regards,
Moorthy -
Sender File Content Conversion
I am using the file content conversion in sender file adapter with fieldFixedLengths parameter in recordset structure. This work fine when the columns in row is exactly with the length set in the parameter recordset. But in same cases, the row in the file has less columns, which occurs errors. If I use the parameter fixedLengthTooShortHandling usage by the receiver file adapter, will it work for the file sender?
Hi Elton,
The parameter fixedLengthTooShortHandling is not a part of the Sender File Adapter's content conversion paramteters, So i guess it will not work for the sender file adapter.
I would suggest that you try it anyways, and if it does work, then it means that this field has been forgotten in the help documentation
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Regards,
Bhavesh -
Error sender file content conversion
HI all,
when an error occurs during the conversion of the file content in sender adapter the others files put in dicrectory is not processed.
I know that exists one parameter in Sender File Adapter that is possible to specify the directory to archive the file with error, but in what SP it is possible?
I have the XI SP15 and this feature is not present.
How I do to instruct the XI to process the nexts files?
thanks.From the Support Package Stack 10 of XI 70
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/f565854b7341e6e10000000a1553f6/frameset.htm
From the Support Package Stack 19 of XI 30
http://help.sap.com/saphelp_nw04/helpdata/en/44/f565854b7341e6e10000000a1553f6/frameset.htm
Good reason to upgrade.
Hope this help,
Regards
Sandro -
Consistency check error in sender file content conversion
Dear Experts,
I am trying one simple File to File scenario in which i have only fields 1>salesorder_number 2>Description
I created a txt file with line items "100,crudeoil" with file name as salesorder.txt
In the sender file adapter i have configured the file convertion paramenters as follows:
Document name : mt_salesorder_sender
Document namespace : http://se.com.sa/sec-sa-qax "Namespace of message type
Recordset Structure : document,*
document.endSeparator : 'nl'
document.fieldSeparator: ,
document.fieldNames : salesorder_number,Description
So after this if i run the scenario In file adapter i am getting the error like "Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'document.fieldFixedLengths' or 'document.fieldSeparator' is missing Consistency check: no. of arguments in 'document.fieldFixedLength' does not match 'document.fieldNames' (0 <> 2) "
Please let me know where i am going wrong.
Regards,
SanthoshHi,
please maintain the order as
Recordset Structure : document,*
document.fieldNames : salesorder_number,Description
document.fieldSeparator: ,
document.endSeparator : 'nl'
Rgds
joel -
Sender File Adapter with file conversion
Hi guys,
Im using a Sender File adapter with file conversion. The message to be processed has a structure with fixed lengths and in your content are some values that needs to be ignored.
An example:
value1 <b>value2</b> value3
I want to ignore <b>value 2</b> but I cant find a parameter for that! Do I need to define dummy fields on my data type and ignore those fields during mapping? Or there is a specific parameter for that?
Thanks in advance,
Ricardo.hi,
there always is another way:)
you can import the whole line to one field
and cut it inside the adapter module
(then you can define start and stop of the substring that you need to use)
but of course it's not standard even though it's quite easy to achieve in java
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
File Content Conversion Problem: Sender File Adapter
Hi All,
In Sender File Adapter, how to spilt the single line into different lines using + as a separator. Plz see below my source file.
#SMESS=IV01:672633SAP:676968:::NL51:02:11+
COPS=678713:676968:070416:IV01'3:11IVFR=678713:PDA and'IND 2'9206 AD'Dtn'INIVDA=070416IVNR=6264008195:676968add1
#EMESS=0+
In above txt file there are 3 lines.
1st line starts with #SMESS
2nd line starts with COPS
3rd line starts with #EMESS.
In 2nd line, if u observe there are 3 lines separating by +. My task is, I have to spilt the 2nd line into 3 lines using + separator.
I already used the xx.endSeparator as '+' to spilt the line but it is not working....
Could anyone help me how to do this. This is very urgent
Thnx,
Kumar.Hi Shankar,
1) My Expected XML Structure:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_IV01 xmlns:ns="http://ms.com/dev/ms">
- <Recordset>
- <DT_SMESS>
<D_9901>IV01</D_9901>
<D_9902>672633SAP</D_9902>
<D_9903>676968</D_9903>
<D_9904 />
<D_9905 />
<D_9906>NL51</D_9906>
<D_9907>02</D_9907>
<D_9908>11</D_9908>
</DT_SMESS>
- <DT_COPS_2>
<D_C022>678713</D_C022>
<D_C023>676968</D_C023>
<D_C008>070416</D_C008>
<D_C111>IV01'3</D_C111>
<D_H559>11</D_H559>
</DT_COPS_2>
- <DT_IVFR_2>
<D_C024>678714</D_C024>
<D_D333>PDA and'IND 2'9206 AD'Dtn'IN+</D_D333>
</DT_IVFR_2>
- <DT_IVDA_2>
<D_D365>070416</D_D365>
</DT_IVDA_2>
- <DT_IVNR_2>
<D_D189>6264008195</D_D189>
<D_H364>676968add1</D_H364>
</DT_IVNR_2>
- <DT_EMESS>
<D_D9901_1>0</D_D9901_1>
</DT_EMESS>
</Recordset>
</ns:MT_IV01>
2) I am not getting any error even if I use key Fields or Not becoz in the RecordSet Structure I mentioned DataType, 1 instead of DataType, *.
3) FCC Parameters:
Document Name: MT_IV01
Document Namespace: http://ms.com/dev/ms
Recordset Structure: DT_SMESS,1,DT_COPS_2,1,DT_IVFR_2,1,DT_IVDA_2,1,DT_IVNR_2,1,DT_EMESS,1
Recordset Sequence: Ascending
Key Field-type : String (Case-sensitive)
4) Error:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'DT_COPS_2':java.lang.Exception: ERROR in configuration: more elements in file csv structure than field names specified! -
...file Sender content conversion 'lastFieldsOptional' error
Hi All,
I am working on a File Sender content conversion--> flat file to XI.
it's fixed length field all the rows with same column.
090627 344535AFDFG+GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090627 344535AFDFG-GBP65433 ASDSSD GFD dFSSGFD 6757532
090628 344536AFDFG+GBP45434 ASDSSD GFD dFSSGFD 6757532
090628 344536AFDFG-GBP45434 ASDSSD GFD dFSSGFD 6757532
**EOF**
I am sucessfully able to handle the file if i remove "**EOF*" from incoming file. But i get "lastfieldsOptional" error with "*EOF**"
>
Parameters-
Recordset Structure - ROW,*
Recordsets per message - *
ROW.fieldFixedLengths - 6,8,20,10,30,1,3,1,11,1,11,6,10,10,20,10,10,2,6,6,2,6,6,3
ROW.fieldNames - INV_DATE,INV_NO,PAYMENT_REF,CUST_NO,CUST_NAME...etc etc
ignoreRecordsetName - true
There are parameters available to ignore Last field(last column) of a Row/Rocerdset
but how to ignore the last row of the file.
Plz suggest some parameter to ignore the last row/field of the file.
Regs,
AnshAnsh,
.lastFieldsOptional is obselete and you cannot use. Please see sap help:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
The best thing comes to my mind is use:
.keepIncompleteFields as YES
Also give a try with:
.missingLastfields as add
So with this I think your last line in the file will read into XI. But the value of last line is **EOF**. So the length is 9. Since your the first two fixed lengths are 6 and 8. You will have these values as ***EOF and ***. So while mapping you can use doesnot satrt with * and map it, so that your last line will be ignored.
Note: with this apporach you have to make sure your first two columns never start with *. If you have a doubt then you can use the condition doesnot equal to ***EOF for first field and doesnot equal to *** for the second field when you map. I hope it makes sense to you.
Regards,
---Satish -
Need Help in Sender File Content Conversion
Hi All,
I request your expert advice on Sender File content Conversion. I need to process the below pasted file. I was able to achieve this by keeping a offset of 6 in Sender PI File Adapter (PI 7.1) to ignore first 6 lines and used a Unix script to remove last line"END OF REPORT".
Now my new requirement is I need to capture the date "DECEMBER 2009" from line 3. How can I do this. I have set offset as 6 so Adapter will start processing from line 7. If I don't set offset Interface fails. Please suggest. Thank you.
ABC LAB XYZ LIMITED"
TRIAL BALANCE"
FOR THE PERIOD ENDED DECEMBER 2009"
"TEST Bank","101000",-1589365.58,0.00,738295.08,0.00
"TEST Bank Clearing A/c","101200",0.00,0.00,14848018.55,0.00
"TEST Bank Sweeps","101250",104315957.19,0.00,7571985482.08,0.00
"TEST Receipts","101260",0.00,0.00,19788596.15,0.00
"TEST Corporate Deposits","101270",-7776629.87,0.00,-135914980.50,0.00
"SHARES","00SH",0.00,0.00,-7869890086.22,0.00
"END OF REPORT"Dear Phani,
Please go through the below blogs:
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
File Content Conversion for Unequal Number of Columns
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns - FCC
Thanks,
Satya -
Problem in message mapping due to file sender content conversion
Hi all
basically i m using file sender content conversion and couldn't make file in a proper nested structure where weight was the nested field of detail as there is a limitation of content conversion in file adapter:
My file came out like this:
<header>
</header>
<Detail>
</Detail>
<Weight>
</Weight>
<Weight>
</Weight>
<Detail>
</Detail>
<Weight>
</Weight>
<Weight>
</Weight>
<trailer>
</trailer>
and i wanted it like:
<header>
</header>
<Detail>
<Weight>
</Weight>
<Weight>
</Weight>
</Detail>
<Detail>
<Weight>
</Weight>
<Weight>
</Weight>
</Detail>
<trailer>
</trailer>
so now the problem is i want to generate an idoc from it....but theres no way out to determine which weight is related to what detail except that the weight related to detail 1 comes after start and end of detail 1 tag and then weights of second detail comes after start and end of detail 2 tag in my source xml file.
The structure of the target idoc is
<header>
</header>
<Detail>
<Weight>
<flag>D1</flag>
</Weight>
<Weight>
<flag>D1</flag>
</Weight>
</Detail>
<Detail>
<Weight>
<flag>D2</flag>
</Weight>
<Weight>
<flag>D2</flag>
</Weight>
</Detail>
<trailer>
</trailer>
so i was wondering if i can make a user defined function in which i feed detail and weight and result a flag d1/ d2 inside the tag field. My logic is smth like
while detail is 1 make all the tag weights coming after detail 1 inside <detail1> tag then resultlist.CC for context change then while detail is 2 make a loop to fill the weight coming after detail 2 inside the <detail2>
Is this possible by any means. I really need help
Thnks
NainaHi
My sender file content conversion have this setting:
HEADER,1,DETAIL,*,Weights,*,TRAILER,*
And plz give me more idea of the adapter module ....is there any blog available which is related to my problem.
Naina -
Sender File Adapter - File Content Conversion
Hello,
i do have a problem with the file content conversion at the sender file adapter.
I have configured the file content conversion with key field defined
keyfield: key
recordsetstructure is set as head,1,item,*
head.fieldSeparator |
head.beginSeparator |
head.endSeparator |
head.keyFieldValue H
head.fieldNames key,....
item.fieldSeparator |
item.beginSeparator |
item.endSeparator |
item.keyFieldValue I
item.fieldNames key,....
When i run it like this it will not read since it has a problem to identify the key fields.
When ever i change the whole logic to be not based on fieldseparator but on fixed length, everything is working perfectly fine.
but this unfortuantly doesn't help as i have no fixed structure for the rest of the fields.
also when i change the recordsetstructure to head,1,item,1 my file is also processed correctly, of corse only for the first line, it at least tells me that the file structure is correctly defined.
Can anyone help why the identification for the keyfields doesn't work with field names and separator but in the same set up with fixed lengths ?
thanks a lotHello All,
thanks for the helpful answers.
So i tried Jayan tip and removed the begin Separter.
Unfortuantly my file is really looking like this |H|...|...| for the header record
and for the item record |I|...|...| ( this was an" I" like in Item ...
In my opinion this means i really do have a begin seperator which is the same like the field separator.
When i removed it from both the file and the config it started to work.
So i wrote an java function which will trow away the first digit in this case and integrated it in my szenario.
So that when this file is read there is no | as a begin flag anymore.
And the whole thing starts to work, this sounds more like a bug then a feature but anyway i am happy.
so thanks a lot
Tina -
Sender file adapter with content conversion Simple XML
Hi experts,
I'm trying to parametrize my sender file adapter content conversion.
I'm receiving a text file with one single line like:
AA1;AA2; AA3;
and I want to convert it to an XML like
<MT_A1>
<field1>AA1</field1>
<field2>AA2</field2>
<field3>AA3</field3>
</MT_A1>
Actually I know how to do somenthing like
<MT_A1>
<LINE>
<field1>AA1</field1>
<field2>AA2</field2>
<field3>AA3</field3>
<LINE>
</MT_A1>
What I want is remove the <LINE> tag from my XML.
Regards
Gonzalo
Edited by: Gonzalo del Castillo on Nov 28, 2008 2:18 PMHi
Use this help document for receiver FCC
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Content Conversion (Pattern/Random content in input file)
File conversion text to xml (Few Last Post) -
Doubt regarding sender file content conversion
Hi Experts
This is my source XML structure, how to define Sender file adapter (Content Conversion) and filed lenths: COMMIT_I 1, STUDENT 12, ID_TYPE 6, ID_NUMBER 60, VALID_FROM 8,VALID_TO 8
<?xml version="1.0" encoding="UTF-8"?>
<ns0:IDENTIFICATION_ADD_Req_MT xmlns:ns0="urn:passhe.com/UpdateIdNumberISA32">
<COMMIT_I>X</COMMIT_I>
<IDENTIFICATION>
<STUDENT>Student</STUDENT>
<ID_TYPE>New</ID_TYPE>
<ID_NUMBER>12345</ID_NUMBER>
<VALID_FROM>12/03/2008</VALID_FROM>
<VALID_TO>13/04/2008</VALID_TO>
</IDENTIFICATION>
</ns0:IDENTIFICATION_ADD_Req_MT>
Please suggest me how to configure Sender file content conversion
Thanks
Dhanush.hi sekhar,
Just go through this blogs & links.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
reward points if found helpfull
regards
chandra.k -
File sender content conversion
hello
I have a txt file sender content conversion in SAP PI.
I define in the content conversion 6 fields names(field1, field2, field3,field4,field5,field 6) but the fie that I am loading has only three field(field1,field2,field3). the file is still loading though there is a different in the structure between what I define in the PI to what is loading to the PI.
is there a way to send an error with out loading the file?
I read about the count function in the mapping. isnt there a build in function that suppose to load only the structure that is define?
Thanks
KfirIf you define 6 fields and only 3 are present in the test file then you wont get an error (AFAIK)
However, if you define 3 fields and there are 6 present in the source file then you will get an error saying more number of parameters found.
isnt there a build in function that suppose to load only the structure that is define?
I dont think so....this may however be achieved using a custom adapter module.
Update:
Just remembered that SAP PI (7.1 and above) comes with inbuilt XML-validation function....check if that helps in your design.
Regards,
Abhishek.
Edited by: abhishek salvi on Dec 15, 2010 1:12 PM
Maybe you are looking for
-
Problem in execution of OIM 9.1 API
Hi, In our project, we have developed a custom application using OIM9.1 API where we are using calling tcRequestOperationIntf.getRequestObject(ReqKey) at multiple places. and also tcRequestOperationIntf.seRequestResponse(a,b,c) methods. same code is
-
HP C310A PREMIUM PHOTOSMART PRINTER APP ENABLED BUT HP SAYS IT IS NOT HELP!
need help please! i have a c310a premium photo smart printer which has the big touch screen and is of course web and app enabled , my problem is when i go on hp connected now it tells me the c310a is not applicable for app downloads ?? i bought this
-
I was on the phone with an apple tech for two hours, we managed to update itune program on computer, but by that time the phone was dead and would not show up as a divice. She told me to let the phone charge, then plug it in and it might recognise m
-
Xcelsius with SAP BPC 7.0 MS
Hi all I have installed SAP BPC 7.0 MS version. In addition to this, I have downloaded trial version of Xcelsius 2008 from SAP Partner Site to test its functionalities. I want to connect SAP BPC with Xcelsius and I am following the How-To guide to do
-
Spry Accordion Triples In Width On Server
Im having a problem where when i upload my site to my server and view it the spry accordion on left is triple the width it should be and is pusshing eveything to the right, weird thing is it works fine when i view it locally. Anyone have any ideas wh