Sender HTTP and validation

Hallo,
we have a HTTP sender to allow partners to send HTTP/XML message. THese messages are converted to IDOCs and are posted to the R/3 system.
HTTP -> IDOC scencario
Until now we have no validation of the incomming XML message.
Goal is not to accept the wrong XML message and to send back a HTTP error code to the sender.
Is it possible to have an adapter module on the planHTTP adapter? As I understood this is not possible???!!!
Is it possible to use the SOAPsender Adapter with the option "No Soap"? I still want to receive HTTP/XML message and I do not want to force my partners to call a webservice.
Can I implement a adapter module in the SOAPsender to return a specific HTTP code if the XML validation fails?
Can this be done only in SYNCHRON mode?
The problem is, the the IDOC to SAP is only asynchron, so do I have to implement a BPM with SYNCH-ASYNCH bridge then?
I know, a lot of questions but all because there is no valiation on XI at the moment.
Best regards
Werner Magerl

Hi,
> Irrespective of where you are doing the validation,
> as Idoc is an Asynch always, wouldnt you need a BPM
> with a Synch - Asynch bridge.
Yes, this is clear and I have implemented this BPM to cover this SYNC-ASYNC problem. I ecpected here, also, that I can send back a HTTP error code, but the only thing which is sent back is HTTP-200 for ok and HTTP-500 (time out).....
> Even if the XML message
> is valid and Idoc is sent succesfully, are you not
> going to send some response back to the HTTP? Wouldnt
> you be using a BPM in this case too?
this is the reason, why I try to do this in an adapter module. Because I think, then the HTTP connection is still open and I can send each HTTP code I want before the message arrives in the integration server or in a BPM
> There are 2 options from what I can understand of the
> requirement,
>
> 1. Either make an Asynch call and avoid a BPM
> altogether , but not propogate back any success or
> error message.
no, we wnat to show an error
> 2. Make a synch call and use a BPM, and propgate
> either a success or failure message.
this is also a way we are working on, but here we have the problem of defining the answer message interfaces.
The incomming message is defined by a industry specific XSD and I was not able to enhance this message interface to be SYNCHRON and with ANSWER message.
But if adapter mdouel is not possible we will work on this again.
reagrds
Werner
>
> Regards,
> Bhavesh

Similar Messages

Sender communication channel for HTTP and IDOC

Why the sender communication channel is not necessary for HTTP and IDOC

Hi,
Because they lie on ABAP stack ie on Integration Engine...so that they can process directly but other adapter lies on Adapter engine.
Regards
Hemant

Sender SOAP and HTTP adatper setting.

Hi,
I've a scenerio, where I send purchase order(PO) file to external partner via a HTTPS url. I use receiver SOAP adapter with transport protocol "HTTP", Message protocol "SOAP 1.1" and in the Target URL I use the https://url also I've the " Do Not Use SOAP Envelope" check box selected in the Conversion Parameters. This scenerio is working fine.
Now the external partner wants to send back the purchse order response (POR) file and he gave the http URL to pick the files. Now the question, Is there a straight simple configuration in sender SOAP adapter or sender HTTP adpter to pick POR
file(s) from the URL?
Can you please let me know whether is it possible? Any link showing the setup will be helpful.
Thanks.

what you need is a HTTP GET call which is not supported by the HTTP adapter until PI 7.3
So refer this : http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/28487 [original link is broken] / Michal's PI tips: Exchange Rates from an XML file on a web page - REST, AXIS
Edited by: Shabarish Vijayakumar on Mar 5, 2012 10:01 PM

Clarification for HTTP and HTTPS Sender Adapter

Hello together,
after some investigating concering scenarios with HTTP and HTTPS sender there are still some points that are not absolutely clear for me.
I know that it is not necessary to configure an HTTP sender communication channel. However if I want to enforce HTTPS sender communication I think I need to add an HTTP sender communication channel with security settings enabled as well as a sender agreement.
To my understanding these settings are activated on the Adapter Engine (Java Stack), HTTP requests however call the ABAP stack directly. How does this work exactly?
Thank you very much for your additional explanation.

Hi,
see below is the format for HTTP URL
http://<hostname:port>/<path>?<query-string>
now query straing can only have values as given in the below link
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
a way around can be to specify the payload for &party or &agency or &schema(if you are not using them) but then XI should be able to identify them correctly(which i m not sure how it will do),secondly the length can be a constraint coz if you add the whole payload ,the URL will become really long.
so i would suggest you not to use it but if you really have to,then explore it properly first and then only use
plz reward points
thnq

HTTP and RFC Adapter are not Required Sender

Hi All,
I have one dought....
Why Plain HTTP and RFC Adapter are not Required Sender Communication Channel and Sender Agreements...
I Know this two Adapter are in ABAP Stack....
Please clarify my dought...
Regards

Idoc Adapters do NOT require Sender Communication Channel.
The Sender System identifies itself at the Integration Server, with the fields SNDPOR and Client of the Control Record.
Sender Communication channels are used for communication betweeen the Application System and the Integration Server.
In the case of Idocs, all idocs are tranferred to the Integration Server pipeline and NOT to the regular EDI/IDOC interface.
The RECEVIER DETERMINATION is based on the values in the Control Record.
If you are doing ALE, then you have to maintain the idoc types which are NOT to be transferred to the Integration server by executing report IDX_SELECT_IDOCTYP_WITHOUT_IS.
By maintaining the Idoc Types using this report, only these idoc types are sent to the regular EDI/IDOC interface.

TS2755 I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

I recently upgraded my IPhone and for 1 person I began receiving this "7233375 Error Invalid Number. Please re-send using a valid 10 digit mobile number or valid short code". I receive text from this person but cannot send. Please help. Thank you.

Hi there
I’d be happy to help with this messaging error! This will be due to the device storing the number incorrectly. Please do the following to resolve the issue:
Delete texts from both old number and new
Delete any call logs including these numbers
Delete old number from contacts
Delete new number from contacts
Restart device
Send text to the new number directly (do not save as contact)
Once the text sends successfully, you can then save as a new contact
I hope this helps!
Charise

Would apple Support send me an email saying: " We need to ask you to complete a short and brief step to securing and validating your account information. Click here to complete validation Failure to complete our validation process will result in a s

We need to ask you to complete a short and brief step to securing and validating your account information.
Click here to complete validation
Failure to complete our validation process will result in a suspension of your Apple ID.

You are welcome. The emails are difficult to block effectively, because the spammer/phishers continually fake their sending email address. You can, however forward the email to Apple.
[email protected]

Send data via HTTP and wait 10 Seconds before sending next Message

Hi Folks,
I am doing an IDOC - XI - HTTP scenario.
after sending a message via the HTTP-receiver I have to wait up to 10 Seconds, before my partner accept the next Message.
Is there a way to configure the HTTP-receiver to wait?
Thanks,
Chris

Hi Chris,
You can use ccBPM for this scenario.
Scenario 1 :
1 IDOC contains multiple records, so you can convert to multiline items.
Loop base on the multiline items (Block Step).
    Send Step for sending http request.
    wait step to wait for 10 seconds.
Scenario 2 :
1 IDOC contains only single record. so you need to collect the IDOC until certain time.
Loop base on the multiline items (Block Step).
    Send Step for sending http request.
    wait step to wait for 10 seconds.
Regards
Fernand

Configuration SAP EP systems in HTTPS and SSL

Hi,
Can anyone tell me the regarding the configuration SAP EP systems in HTTPS and SSL.
The scenario is Client -->Application gateway( Web Dispatcher) -->EP6
Regards,
Moulinath Ray

Hi,
I am giving to you the steps we do for our securization (EP 7.0):
Prerequisites:
-Download SAP Cryptographic ToolKit at http://service.sap.com/ swdc and -> SAP Crypto-graphic Software -> SAP JAVA CryptoToolkit (J2EE Engine as of Release 6.30)
-Unzip it with SAPCAR
Logon in SDM and deploy the file
Check in Visual Admin -> Dispatcher/Server -> Libraries -> core_libs iaik_jce.jar is included
Loof for SSL Service in Config Tool in Server and Dispatcher, it should be "always"
Steps:
-Asking for a certificate
Visual Admin -> Cluster -> Server (central instance ) -> Services -> Key storage -> Service_ssl -> Create
Fill in all the data, and be careful with the common name:
-It shouldn´t have "http" or "https" on it
-It shouldn´t have port number on it
For example: "https
www.myportal.domain:port", the common name should be "www.myportal.domain"
Visual Admin -> Key Storage -> service_ssl -> Select your certificate and u201CGenerate CSR Requestu201D
Send the file to a CA
-Importing the validated certificate:
Visual Admin -> Key Storage -> Import CSR Response
In each Server, under SSL Provider, assign the certificate to port 50001, in each Dispatcher
Now, the portal is secure, and you can check it now.
A last step would be export the certificate and send it to your Network Team, so they can export it in the load balancing server, reverse proxy, etc.
You can have a look at this link:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/2de3be0382df45a398d3f9fb86a36a/frameset.htm
Some of the threads link:
/message/5568001#5568001
/thread/853387
Regards,
Niraj
Edited by: Niraj Kumar on Jan 22, 2009 3:59 PM

UCCX8.5 send HTTP trigger? for another server application

We have an Outage Management System (OMS) that will accept an HTTP string that creates a new outage record. So, if I enter the included example into any browser window in our network, it will create a new OMS record.
For customers dialing into our phone system, I want them to be able to "report" an outage by building this http string and sending it to our OMS server. I have a script that prompts the caller for their account number. I need to add this account number onto the end of the http string (in the example, $CustomerAccount), and then send this string to a browser to create a new OMS record. The HTTP string:
//OMSServerName/outage/main/xdoReqHandler?beanName=AutomatedDevice&methodName=get&accountNumber=$CustomerAccount
can someone explain to me if any of the Http Contact steps would be able to do this? In my attached script, I have tried using the Http Redirect step. My resulting error is:
Am I using these steps as designed? (with the error - apparently not).

Brian,
I was able to make your recomendation work out. thank you. I used my HTTP string with a fixed Account Number value and it generated a new record in our OMS server! Just what I wanted. My next step is to use a variable for the Account Number so I can capture it from my scripting. can you comment on how a variable string may be used in your example? here is what I have so far:
(I have changed the OMSServerName and Account Number as obscure to protect my records)
with an actual IP, and valid account Number in the set statement, the resulting message in the sendHTTPString name:
U"\r\n \r\n \r\n Account number invalid\r\n \r\n \r\n \r\n"
Again, if i input the account number inside the docURL variable instead of the $CustomerAccount it works! The $CustomerAccount is not getting translated in this environment?
Here is the variable name and value when I debug the script:
Should I expect to see the actual account number in this value?
thank you for the help
-Wes.

Problem in sending HTTP request to the server.

Hi,
i dveloped an ant script for sar deployment.
i deployed a sar to my local soa server with ant script. it got deployed succesfully..
but when i try to deploy to a remote server, getting the below error..
"Problem in sending HTTP request to the server. Please make sure the server is up and/or check standard HTTP response code for 404"
but the server is up and runnig and i am able to ping it from my machine and also access the console...
below is my script
build.properties
wn.bea.home=C:/Oracle/Middleware
all.needed.jars.path=D:/SourceCode/neededJAR
oracle.soa.home=C:/Oracle/Middleware/Oracle_SOA1
java.passed.home=C:/Oracle/Middleware/jdk160_24
#Deployment environment
deployment.plan.environment=DEV
#Deploy Action
deployAction =redeploy
#credentials
user=weblogic
password=welcome1
#For Composite deployment
serverURL=http://10.177.154.6:7001
forceDefault=true
server=10.177.154.6
port=7001
sarLocation=D:/SourceCode/JAR
build.xml
<?xml version="1.0" encoding="iso-8859-1"?>
<project name="soaDeployAll" default="deployAll">
     <echo>basedir ${basedir}</echo>
     <property environment="env"/>
<echo>current folder ${basedir}</echo>
     <property file="${basedir}/build.properties"/>
     <taskdef resource="net/sf/antcontrib/antlib.xml">
     <classpath>
          <pathelement location="${all.needed.jars.path}/ant-contrib.jar"/>
     </classpath>
     </taskdef>
     <target name="init">
          <tstamp>
               <format property="timestamp" pattern="yyyy-MM-dd_HH-mm-ss"/>
          </tstamp>
          <property name="build.log.dir" location="${basedir}/buildlogs"/>
          <mkdir dir="${build.log.dir}"/> <property name="build.log.filename" value="build_${timestamp}.log"/>
          <record name="${build.log.dir}/${build.log.filename}" loglevel="verbose" append="false"/>
          <echo message="Build logged to ${build.log.filename}"/>
     </target>
     <target name="deployAll" depends="init">
     <echo>Deploy for environment ${deployment.plan.environment}</echo>
     <antcall target="deployAllComposites"/>
</target>

     <target name="deployAllComposites" depends="init">
     <foreach target="deployComposites" param="Files">
          <fileset dir="${sarLocation}" casesensitive="no" includes="*.jar"/>
     </foreach>
     </target>
     <target name="deployComposites" depends="init">
     <basename file="${Files}" property="basename"/>
<echo>Deploy Project ${basename} for environment ${deployment.plan.environment}</echo>
          <if>
               <equals arg1="${deployAction}" arg2="deploy" />
               <then>
                    <echo message="Deploying composites in Managed server........." />
                    <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
                         <property name="serverURL" value="${serverURL}"/>
                         <property name="user" value="${user}"/>
                         <property name="password" value="${password}"/>
                         <property name="overwrite" value="false"/>
                         <property name="forceDefault" value="${forceDefault}"/>
                         <property name="sarLocation" value="${sarLocation}/${basename}"/>
                    </ant>
               </then>
               <else>
                    <echo message="ReDeploying composites in Managed server........." />
                    <ant antfile="${oracle.soa.home}/bin/ant-sca-deploy.xml" inheritAll="true" target="deploy">
                         <property name="serverURL" value="${serverURL}"/>
                         <property name="user" value="${user}"/>
                         <property name="password" value="${password}"/>
                         <property name="overwrite" value="true"/>
                         <property name="forceDefault" value="${forceDefault}"/>
                         <property name="sarLocation" value="${sarLocation}/${basename}"/>
                    </ant>
               </else>
          </if>
</target>
</project>
please help....

Hi,
Give the serverURL as http://<host>:<managed.server.port>/soa-infra/deployer and try.
e.g . http://10.177.154.6:8001/soa-infra/deployer
Regards,
Neeraj Sehgal

PI 7.1 Sender Interface and Receiver Interface gets interchanged

Hi All,
I m facing a strange problem in PI 7.1
For many of my scenarios, the Sender Interface, sender namespace and receiver Interface, receiver namespace information gets interchanged and displayed incorrectly.
But sometimes its working fine.
When we analysed the Log messages, found that, after xml validation step, the sender and reciever interface gets interchanged.
Any idea why this happens?
How to rectify this error?

Aarthi,
Please check your message interfaces once again. Sender is outbound and Receiver is inbound.
Also please check your receiver determination.
Regards,
---Satish

Why we dont need sender agreement and comm channel in IDOC to file scenario

Hi,
there are 2 queries:
first query :
Scenario is "Idoc to file transfer"
why we dont need sender agreement and communication channel for IDOC to file ,while we do need
both of these for "File to RFC "
Answer : which i got is because IDOC sits at ABAP stack but same is valid for RFC also.
Then why For "IDOC to file" we dont need that.
Second query:
Also when i did scenario for File1-RFC-File2 scenario using BPM i have created a interface
between XI-RFC synchronous to send data which we got from file1 in XI to RFC importing parameter
and getting data from RFC back to File2.
Here in IDOC to file scenario why we dont need any interfface for IDOC-XI Asynchronous.
Regards,
Mayank
Edited by: mayank verdia on Jan 13, 2009 11:49 AM
Edited by: mayank verdia on Jan 13, 2009 11:50 AM

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

ABAP Program to send HTTP message

Hi All,
I tried executing the program in "[ABAP-Based HTTP Client for Messages to SAP XI|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ae388f45-0901-0010-0f99-a76d785e3ccc]" Article to send HTTP messages to XI system.
Entered all required parameters and entered XMl Payload with the option "Insert Payload as Text"
The scenario in XI has Integration Process and the first step is a Sync-Async step.
The message execution fails in that step with status "Pipeline Timeout"
I can see only half of the xml payload in sxmb_moni.
There are no short dumps and the Integration Process is working fine when I send messages using HTTP client.
Let me know if there are any checks for tracing the problem.
Thanks,
Uma

Hi,
I have gone thru this blog but I want send SMS to US Mobile no.I checked other webservice but it supports only few cellular networks in US.
any other alternate for this...
anyway thanks for your reply
Regards,
Nivas

Soap sender adpater issue missing sender interface and namespace in the msg

Hi Expert,
I got a problem when try to using soap sender adapter.
Here is the sceanrio:
Http web service client call ---PI soap sender adapter -some routing data-business system inbound.
Sytem information:
SAP_ABA     700     0019     SAPKA70019     Cross-Application Component
SAP_BASIS     700     0019     SAPKB70019     SAP Basis Component
PI_BASIS     2005_1_700     0019     SAPKIPYJ7J     PI_BASIS 2005_1_700
ST-PI     2008_1_700     0001     SAPKITLRD1     SAP Solution Tools Plug-In
SAP_BW     700     0021     SAPKW70021     SAP NetWeaver BI 7.0
ST-A/PI     01L_BCO700     0000          -     Servicetools for other App./Netweaver 04
Here is my problem. I use soapui trigger a test msg to PI system. But in the sxmb_moni, only sender service is there.
The sender interface and sender namespace is missing. And the msg has error called: :INTERFACE_REGISTRATION_ERROR.
Which means I do not have a inbound interface to process the msg.
But I suppose to redirect the msg to business system.
Here is the configuration:
reciever determination: soap sender service, soap outbound interface, soap interface namespace --> reciever business sytem.
Interface ditermination: soap sender service, soap interface --> receiver interface, receiver namespace.
Sender agreement: soap service, soap itnerface --- soap communication channel
receiver agreement, soap service---> receiver sevice, receiver interface, reciever namespace and reciever cummunication channel
define of soap sender adapter:
soap sernder, with use encoded header and use query string checked and qos as exactly once.
Anyone has any idea here? Many thanks! And most strange thing is yesterday it works and today it failed.
Please kindly help here.
Thanks a lot,
Leon

Hi guys,
thanks for the input.
Hi Sven,
I have input default interface and namespace.
Hi sivasakthi,
Regarding mistype, it may happen, I will do it again right away.
And the URL is generated by the wsdl toolkit in the directory.
I marked use encoded header and query string in the communication channel.
I will generate the wsdl again and test it again.
Regarding URL(endpoint of web service):
http://hostname:50000/XISOAPAdapter/MessageServlet?channel=:AGSSAL_SOAP:AGSSAL_SOAP_CC&version=3.0&Sender.Service=AGSSAL_SOAP&Interface=urn:a1s_saplivelinkcontent.service.sap.com^MI_O_AS_DELIVERNOTIFY_SOAP
Again thanks for you guys help.
Best regards,
Leon

Sender HTTP and validation

Similar Messages

Maybe you are looking for