Sending an excel sheet of  to mail Ids using file to mail scenario

Hello,
I have a folder with three folders archive exception and log. Log folders have the details of exception. I want the XML files that are in Exception, to be sent to resp email ids with the data in it to be stored in an excel sheet( data will be collected from the log file for the correspondng file in exception).
eg: if test.xml is in exception its log will have an exception detail somethng like " Enter a value".
In this case i want to give the exception details as well as some relevant details with it like material number etc , time at which the exception occured . These details are to be given in an excel sheet .
Is it possible to do using file to mail scenario. Please help by explianing the procedure.
Regards.

This can be done with the help of some Java and ABAP coding. I can give you a general view on how to do this.
1. Configure a file adapter for sender to pick up the exception files.
2. While doing the mapping, create a UDF to store the values (which you need to send it to excel file) in a table in ABAP Stack.
3. Create a ABAP Program in R3 (which can be schedule on regular intervals depending on ur req) to create an excel sheet based on the the data in the table (created in previous step). I am not sure how easy to code ABAP program to create an excel sheet.
4. Create one more file adapter to send this excel sheet to the corresponding mail ids.
This is a very high level view on doing this.

Similar Messages

  • When I attempt to email a link using "File" then "Mail Link to this Page", I can't.  I get a message saying "...Safari can't find an email application." even though I am using mail. Why can't !?

    When I attempt to email a link in Safari using "File" then "Mail Link to this Page", I can't.  I get a message saying "...Safari can't find an email application." even though I am using mail. Why?

    I got it - no need to respond.  I went to Mail Prefs, General, Defalt Email Reader, and rechose Mail.  Problem solved!

  • Sending a excel sheet as attachment in mail

    Hi,
    I have requirement where I need to send excel sheet as attachment in mail. I could do it by using FM SO_NEW_DOCUMENT_ATT_SEND_API1. But, I am not able to format the excel sheet before sending.
    I need to make heading bold, fix column width and wrap text in some cells, and send the mail.
    Pls help me with your suggestions.
    Thanks,
    Siva.

    this link will show you how to do formatting in Excel using the OLE method, then use that EXCEL to send the MAIL using your program \
    [OLE-format excel |http://www.sap-img.com/abap/download-to-excel-with-format-border-color-cell-etc.htm]
    Hope That Helps
    Anirban M.

  • Excel sheet on sharepoint to be used as source for Xcelsius dashboard

    Hi Everyone,
    We have to build an Xcelsius dashboard based on an excel sheet's data. This excel sheet is placed on a sharepoint, which will be updated periodically.
    I would like to know what kind of dat a connection i can use to fetch this excel data and publish this dashboard.
    I couldnt find any suitable type of connection in the data manager...please suggest me a way to get this done.
    Thanks,
    Shesha.

    Hi Ryan,
    Yes our customer does have sharepoint, can you please let me know how the sharepoint can expose the Excel spread sheet as a web service. I think this solution will work out, if i can get the web service. Please share the steps for this.
    Does it involve any 3rd party tools? .
    Thanks,
    Shesha.

  • Services that need mail server - Use an outside mail server

    Hello,
    I have a mail server somewhere on the internet, and outside my localnetwork.
    Our OSX local server serves few services : DNS (for local dns name) OD, Ical, Ichat, Afp, Mobile access, vpn
    Do they services use mail server locally ?
    Do I need to setup a mail server localy or can I use my outside mail server ?
    If needed
    If I just set on every OD users, a mail as [email protected] and if my internet mail servers has an account for them, how can I define for these users the smtp/pop accounts to allow them to send mail through my net mail server ?
    Do I have to setup a local mail server and accept in my internet mmail server this local mail server to relay mail in ?
    In fact, what I'd like is to keep this internet mail servers, and set all my OD users using this mail server.
    Thanks for your help, and sorry for my poor English. Hope you undurstood

    I don't think you need mail services running to use any of those services. I can't speak for mobile access because I don't use that service. I think iCal and iChat need an email address for each user. You can set that in the info tab for each user in workgroup manager.

  • E-Mail reporting in file to mail adapter scenario

    Experts,
       I am working on a file to mail adapter in which, have to just send a mail to the recipient by  putting a subject line and mail body.
    am following the following example
    /people/community.user/blog/2006/09/07/email-reporting
    but my requirement is not to send the mail attachment. I just need to send a mail body stating the error location.
    here at teh receiver side, have downloaded a mail.xsd. in this "subject line","from field" , "to" field is there but there is no "mail body" field .
    Can any one please help me out. I just require to send a mail body to the recipient.
    Thanks
    Veeru

    Expert,
       I have used but still am getting teh attachment not as a mail body.
    Isit possible to send the mail body via XSLT mapping , for eg
    <?xml version='1.0'?>
    <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://perks.com/MailTest">
      <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
        <xsl:template match="/">
       <ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
        <Subject>Error files from XI</Subject>
        <From>from mail ID</From>
        <To>to mail id</To>
        <Content_Type>text/html</Content_Type>
        <Content>
         <xsl:text xsl:space="preserve">The error files for which service entry has not been created:</xsl:text>
         <xsl:value-of select="$break"/>
         <xsl:value-of select="$break"/>
         <xsl:value-of select="$tableB"/>
         <xsl:value-of select="$thB"/>
         <xsl:value-of select="$tdB"/>
         <xsl:text xsl:
        </Content>
       </ns1:Mail>
      </xsl:template>
    </xsl:stylesheet>
    Any suggestions?
    Thanks
    Veeru

  • Why does mail sent using the MacOSX mail client not show up in my sent folder when I access my Gmail account in a browser?

    I've recently started using my first Mac, and I hooked my work email (Forwarded to Google Mail) and my personal email (Gmail) into the MacOSX mail client. Everything seemed to be going smoothly, until I noticed that sent mail from my work email through the MacOSX Mail client is not showing up in my sent box on any other clients. Sent mail does show up in my personal email in Gmail, though.
    Can anyone help me understand why mail sent from the MacOSX Mail client doesn't end up in the sent folder of my work Gmail account? I suspect it has something to do with the forwarding-to-Google process -- a sort of "too many cooks in the kitchen" situation. Has anyone heard of this problem before? What should I try?

    I've been noticing that too.  Just told me there were 6 outgoing messages, even though I did not create any new messages.
    One hypothesis is that it's generating those messages when a rule moves an email from one folder to another.
    Can someone at Apple confirm this?

  • Unable to get source file content as mail body in file to mail scenario

    Hi Friends,
    I am facing one problem with one of my file to mail scenario in PI(SP9).  I have done bypass scenario(without IR only with ID objects). Scenario is working fine, i am getting mail also.  But my requirement is i want complete source file content as a mail body (not xml format, text format).  I have checked all options, but configured scenario bydefault taking source content as a attachment and mail body is empty.  I have tested below options
    1. If i choose message protocol as FCC mechanism at source side content at target side i am getting xml format as a attachment( In mail adapter i have selected message protocol as xi payload, and without packate option on mail adapter). If i choose message protocol as xi all, i am getting 2 files as a attachment (one file as a payload content and second file as a source file content in xml format).
    2. If i choose message protocol as file at souce side that time i am getting source complete content as a attachment at target side in xml format, but mail attached file content is flat file(.xml extension) format. When i tried to open attachment file that time i am getting error in explorer, but i can see only one row in explorer  remaining rows unable to see.
    Please share your ideas on this.

    Hi,
    Follow below steps
    1. First basis level need to configure setup(SMTP) for mail.  After that only mail will go from SAP.
    2. Source side depending on requirement take communication channel(idoc, file etc)
    3. Receiver side communication channel take mail adapter and configure below setup
       3.1 select message protocol XI ALL/ XI PAYLOAD(WITH PACKAGE or WITHOUT PACKAGE)
       3.2 if message protocol is XI ALL, the complete content will be sent as a attachment along with payload file
       3.3 if message protocol is XI PAYLOAD, the source message, the source message will be sent as attachment.  Playload file filter automatically.
       3.4 If you use PACKAGE option on mail adaper, this time source strucute need to import from SAP (some standard structure only will be support, without strucutre we can't work).  If you choose package option no need to give mail id on communication channel, we need to pass mail id's from source structure.
    I hope now clear.

  • Send output types by mail as atteched file with mail text

    Hello,
    I need to send an invoice by E-mail. A psecific output type has been created (transmission meium 5).In NACE section ''Mail title and texts'' is processed (Texte created and Document title created).
    When I generate this output type in the invoice, the mail is sent to the partner defined in NACE but the mail contains only the invoice in pdf format, and no mail text.
    How can I send a text at the same time as the pdf file?
    Thanks.
    Benjamin

    I konw the way to send mail using function modules with pdf file as attachement.
    What I want to do is to use an ouput type with communication medium 5 and to add a text in the mail.
    Benjamin
    Edited by: Benjamin CABOT on May 11, 2009 1:30 PM

  • Using mail package in file to mail scenario

    For sending the mail in proper email format ,
    we have to check the USE MAIL PACKAGE option.
    the corresponding  TO, FROM ,SUBJECT and CONTENT
    need to be handled in mapping..
    Can anyone tell me which field in the mapping will match the req fields ????

    <ns:Mail xmlns:ns="http://sap.com/xi/XI/Mail/30">
    <Subject>Hello</Subject>
    <From>[email protected]</From>
    <To>[email protected]</To>
    <Content>row1
    row2
    row3
    row4</Content>
    </ns:Mail>
    You can use UDF example to do this. Assume your original message payload is:
    <root>
    <text>row1</text>
    <text>row2</text>
    <text>row3</text>
    <text>row4</text>
    </root>
    Create a advanced user defined function like this:
    public void AddText(String[] a, ResultList result, Container container){
    codeString b = "";
    for (int j=0;j<a.length;j++)
    b = b + a[j] + "\n";
    result.addValue(b);[/code]
    Now you connect
    text -> addText -> Content

  • Sending a formatted Excel sheet as an attachment in a mail.

    Hi ,
    I have been using following code to to send formatted excel sheet as attachment in email.
    in the below code I want to change the format of cell from Bold to Underline.
    I have replaced Bold with Underline for below code but it is not working can anyone suggest on this.
    Department
      r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
      r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).
      r_data = l_document->create_simple_element( name = 'Data'  value = 'MATNR'  parent = r_cell ).
      r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
      r_format->set_attribute_ns( name = 'Bold'  prefix = 'ss'  value = '1' ).
    Creating a ixml Factory
      l_ixml = cl_ixml=>create( ).
    Creating the DOM Object Model
      l_document = l_ixml->create_document( ).
    Create Root Node 'Workbook'
      l_element_root  = l_document->create_simple_element( name = 'Workbook'  parent = l_document ).  l_element_root->set_attribute( name = 'xmlns'  value = 'urn:schemas-microsoft-com:office:spreadsheet' ).   ns_attribute = l_document->create_namespace_decl( name = 'ss'  prefix = 'xmlns'  uri = 'urn:schemas-microsoft-com:office:spreadsheet' ).  l_element_root->set_attribute_node( ns_attribute ).   ns_attribute = l_document->create_namespace_decl( name = 'x'  prefix = 'xmlns'  uri = 'urn:schemas-microsoft-com:office:excel' ).  l_element_root->set_attribute_node( ns_attribute ).
    Create node for document properties.
      r_element_properties = l_document->create_simple_element( name = 'TEST_REPORT'  parent = l_element_root ).  l_value = sy-uname.  l_document->create_simple_element( name = 'Author'  value = l_value  parent = r_element_properties  ).
    Styles
      r_styles = l_document->create_simple_element( name = 'Styles'  parent = l_element_root  ).
    Style for Header
      r_style  = l_document->create_simple_element( name = 'Style'   parent = r_styles  ).  r_style->set_attribute_ns( name = 'ID'  prefix = 'ss'  value = 'Header' ).   r_format  = l_document->create_simple_element( name = 'Font'  parent = r_style  ).
    Worksheet
      r_worksheet = l_document->create_simple_element( name = 'Worksheet'  parent = l_element_root ).  r_worksheet->set_attribute_ns( name = 'Name'  prefix = 'ss'  value = 'PO Details' ).
    Table
      r_table = l_document->create_simple_element( name = 'Table'  parent = r_worksheet ).  r_table->set_attribute_ns( name = 'FullColumns'  prefix = 'x'  value = '1' ).  r_table->set_attribute_ns( name = 'FullRows'     prefix = 'x'  value = '1' ).
    Column Formatting
      r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).  r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '70' ).   r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).  r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '70' ).   r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).  r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '70' ).   r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).  r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '70' ).   r_column = l_document->create_simple_element( name = 'Column'  parent = r_table ).  r_column->set_attribute_ns( name = 'Width'  prefix = 'ss'  value = '70' ).
    Blank Row
      r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
    Column Headers Row
      r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).  r_row->set_attribute_ns( name = 'AutoFitHeight'  prefix = 'ss'  value = '1' ).
    Sr. No.
      r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).  r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).  r_data = l_document->create_simple_element( name = 'Data'  value = 'EBELN'  parent = r_cell ).  r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    User Name
      r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).  r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).  r_data = l_document->create_simple_element( name = 'Data'  value = 'EBELP'  parent = r_cell ).  r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    Full Name
      r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).  r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).  r_data = l_document->create_simple_element( name = 'Data'  value = 'AEDAT'  parent = r_cell ).  r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).
    Department
      r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).  r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Header' ).  r_data = l_document->create_simple_element( name = 'Data'  value = 'MATNR'  parent = r_cell ).  r_data->set_attribute_ns( name = 'Type'  prefix = 'ss' value = 'String' ).  r_format->set_attribute_ns( name = 'Bold'  prefix = 'ss'  value = '1' ).   r_format  = l_document->create_simple_element( name = 'Interior' parent = r_style  ).  r_format->set_attribute_ns( name = 'Color'   prefix = 'ss'  value = '#C0C0C0' ).  r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss'  value = 'Solid' ).   r_format  = l_document->create_simple_element( name = 'Alignment'  parent = r_style  ).  r_format->set_attribute_ns( name = 'Vertical'  prefix = 'ss'  value = 'Center' ).  r_format->set_attribute_ns( name = 'WrapText'  prefix = 'ss'  value = '1' ).
    Data Table
      LOOP AT it_ekpo INTO wa_ekpo.     r_row = l_document->create_simple_element( name = 'Row'  parent = r_table ).
    Sr. No.
       r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).
       r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).
       l_value = sy-tabix.
       CONDENSE l_value NO-GAPS.
       r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data
       r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'Number' ).                               " Cell format
    EBELN
        r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).    r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).    l_value = wa_ekpo-ebeln.    r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data    r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'String' ).                               " Cell format
    EBELP
        r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).    r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).    l_value = wa_ekpo-ebelp.    r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data    r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'String' ).                               " Cell format
    AEDAT
        r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).    r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).    l_value = wa_ekpo-aedat.    r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).           " Data    r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'String' ).                               " Cell format
    MATNR
        r_cell = l_document->create_simple_element( name = 'Cell'  parent = r_row ).    r_cell->set_attribute_ns( name = 'StyleID'  prefix = 'ss'  value = 'Data' ).    l_value = wa_ekpo-matnr.    r_data = l_document->create_simple_element( name = 'Data'  value = l_value   parent = r_cell ).          " Data    r_data->set_attribute_ns( name = 'Type'  prefix = 'ss'  value = 'String' ).                              " Cell format   ENDLOOP.
    Creating a Stream Factory
      l_streamfactory = l_ixml->create_stream_factory( ).
    Connect Internal XML Table to Stream Factory
      l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ).
    Rendering the Document
      l_renderer = l_ixml->create_renderer( ostream  = l_ostream  document = l_document ).  l_rc = l_renderer->render( ).
    Saving the XML Document
      l_xml_size = l_ostream->get_num_written_raw( ).
    Before sending the mail,
    LOOP AT l_xml_table INTO wa_xml.
        CLEAR objbin.
        objbin-line = wa_xml-data.
        APPEND objbin to BINARY_CONTENT.
      ENDLOOP.
    Here, objbin is of type SOLIX and BINARY_CONTENT is of type SOLIX_TAB.
    Now, call the method,
    CALL METHOD DOCUMENT->ADD_ATTACHMENT
            EXPORTING  I_ATTACHMENT_TYPE = 'XLS'
                       I_ATTACHMENT_SUBJECT = 'My attachment'
                       I_ATT_CONTENT_HEX    = BINARY_CONTENT   .

    Try this..
      r_format->set_attribute_ns( name = 'Underline'  prefix = 'ss'  value = 'Single' ).

  • Excel sheet as an attachment to the mail box

    Hi,
    i need to send an excel sheet as an attachement to the outlook mail box..
    is any function module is there which serves my requirement? or if any other way is there pls let me know.
    thanks..

    Here is some sample code.
    report zrich_0001.
    parameters: p_email   type somlreci1-receiver
                                   default [email protected]'.
    data: begin of it001 occurs 0,
          bukrs type t001-bukrs,
          butxt type t001-butxt,
          end of it001.
    data:   imessage type standard table of solisti1 with header line,
            iattach type standard table of solisti1 with header line,
            ipacking_list like sopcklsti1 occurs 0 with header line,
            ireceivers like somlreci1 occurs 0 with header line,
            iattachment like solisti1 occurs 0 with header line.
    start-of-selection.
      select bukrs butxt into table it001 from t001.
    *   Populate table with detaisl to be entered into .xls file
      perform build_xls_data .
    * Populate message body text
      clear imessage.   refresh imessage.
      imessage = 'Please find attached excel file'.
      append imessage.
    * Send file by email as .xls speadsheet
      perform send_email_with_xls tables imessage
                                          iattach
                                    using p_email
                                          'Example Excel Attachment'
                                          'XLS'
                                          'TestFileName'
                                          'CompanyCodes'.
    *      Form  BUILD_XLS_DATA
    form build_xls_data .
      constants: con_cret type x value '0D',  "OK for non Unicode
                 con_tab type x value '09'.   "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    *class cl_abap_char_utilities definition load.
    *constants:
    *    con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    *    con_cret type c value cl_abap_char_utilities=>CR_LF.
      concatenate 'BUKRS' 'BUTXT'
             into iattach separated by con_tab.
      concatenate con_cret iattach into iattach.
      append  iattach.
      loop at it001.
        concatenate it001-bukrs it001-butxt
               into iattach separated by con_tab.
        concatenate con_cret iattach  into iattach.
        append  iattach.
      endloop.
    endform.
    *      Form  SEND_EMAIL_WITH_XLS
    form send_email_with_xls tables pit_message
                                              pit_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription.
      data: xdocdata like sodocchgi1,
            xcnt type i.
    * Fill the document data.
      xdocdata-doc_size = 1.
    * Populate the subject/generic message attributes
      xdocdata-obj_langu = sy-langu.
      xdocdata-obj_name  = 'SAPRPT'.
      xdocdata-obj_descr = p_mtitle .
    * Fill the document data and get size of attachment
      clear xdocdata.
      read table iattach index xcnt.
      xdocdata-doc_size =
         ( xcnt - 1 ) * 255 + strlen( iattach ).
      xdocdata-obj_langu  = sy-langu.
      xdocdata-obj_name   = 'SAPRPT'.
      xdocdata-obj_descr  = p_mtitle.
      clear iattachment.  refresh iattachment.
      iattachment[] = pit_attach[].
    * Describe the body of the message
      clear ipacking_list.  refresh ipacking_list.
      ipacking_list-transf_bin = space.
      ipacking_list-head_start = 1.
      ipacking_list-head_num = 0.
      ipacking_list-body_start = 1.
      describe table imessage lines ipacking_list-body_num.
      ipacking_list-doc_type = 'RAW'.
      append ipacking_list.
    * Create attachment notification
      ipacking_list-transf_bin = 'X'.
      ipacking_list-head_start = 1.
      ipacking_list-head_num   = 1.
      ipacking_list-body_start = 1.
      describe table iattachment lines ipacking_list-body_num.
      ipacking_list-doc_type   =  p_format.
      ipacking_list-obj_descr  =  p_attdescription.
      ipacking_list-obj_name   =  p_filename.
      ipacking_list-doc_size   =  ipacking_list-body_num * 255.
      append ipacking_list.
    * Add the recipients email address
      clear ireceivers.  refresh ireceivers.
      ireceivers-receiver = p_email.
      ireceivers-rec_type = 'U'.
      ireceivers-com_type = 'INT'.
      ireceivers-notif_del = 'X'.
      ireceivers-notif_ndel = 'X'.
      append ireceivers.
      call function 'SO_DOCUMENT_SEND_API1'
           exporting
                document_data              = xdocdata
                put_in_outbox              = 'X'
                commit_work                = 'X'
           tables
                packing_list               = ipacking_list
                contents_bin               = iattachment
                contents_txt               = imessage
                receivers                  = ireceivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    endform.
    Regards,
    Rich Heilman

  • Excel sheet for difference between EP 6.0 and EP 7.0

    Hi All,
    Wish all of you a very very Happy New Year 2008.
    Can some body send the excel sheet for difference between EP 6.0 and EP 7.0 to [email protected] asap.
    Thanks in advance
    Jyoti

    Aaaaggghhhh.
    Please could someone either get it uploaded as an article... or even easier, add it to the Portal Wiki.  It has an attachments tab!
    Then we won't have huge threads with e-mail addresses on (which bots will then pick up and send lots of spam to).
    Many Thanks
    Paul

  • Read fron Excel Sheet on Browser.

    Hi All,
    I ve a project in which I have generated an Excel sheet taking data from XML using jakarta POI.Till now it works well, the Excel sheet is displayed on browser.Now the challenge is If user edit some data in Excel Sheet displayed on browser,there should be a Submit button clicking on which the edited data must be reflected in the XML.
    Any help in this direction would be highly appreciated.
    Thanks.

    Thanks for sending this link, know i want to
    display and existing Excel chart Using OLE is it
    possible in jsp/servletYes, you can do it.
    http://www.javaworld.com/javaworld/jw-03-2004/jw-0322-poi.html
    Pls try to use google. Search this string in google - "Excel java OLE"
    Cheers

  • Showing excel sheet in browser

    we have two excell sheets, we r copying content of first excell sheet into
    second one by using paste special option
    so it makes OLE connection,whene evere we change the content in first sheet that will effect on second sheet.
    we need second excell sheet in web Browser
    we tried using jsp but it displaying in diff format like byte code
    please let me Know if u find any solution for this.....

    Thanks for sending this link, know i want to
    display and existing Excel chart Using OLE is it
    possible in jsp/servletYes, you can do it.
    http://www.javaworld.com/javaworld/jw-03-2004/jw-0322-poi.html
    Pls try to use google. Search this string in google - "Excel java OLE"
    Cheers

Maybe you are looking for