Excel sheet on sharepoint to be used as source for Xcelsius dashboard

Hi Everyone,
We have to build an Xcelsius dashboard based on an excel sheet's data. This excel sheet is placed on a sharepoint, which will be updated periodically.
I would like to know what kind of dat a connection i can use to fetch this excel data and publish this dashboard.
I couldnt find any suitable type of connection in the data manager...please suggest me a way to get this done.
Thanks,
Shesha.

Hi Ryan,
Yes our customer does have sharepoint, can you please let me know how the sharepoint can expose the Excel spread sheet as a web service. I think this solution will work out, if i can get the web service. Please share the steps for this.
Does it involve any 3rd party tools? .
Thanks,
Shesha.

Similar Messages

How to use multiple connections for xcelsius dashboard via toggle button

Can anyone shed some light on how to apply a toggle button for multiple connections using xcelsius dashboard.
I created two SAP connections in my xcelsius dashboard. The first connection uses query 1 (bottom ten customers) and the second connection uses query 2 (top ten customers). I wanted to use a toggle button where the user would click Top Ten customers versus Bottom Ten customers. Which ever the user clicks in the toggle botton would run that query.
If the toggle button is not the way to handle this can someone explain a better approach to run either query in the same dashboard.
Thanks,
Joe

Hi,
I've never had to do this so have no practical experience. However in theory you should be able to do the following (assuming the data connection type youu2019re using has the "Usage" tab):
Set up the two connections as normal - On the usage tab set the detail query to Refresh before components are loaded and make sure that this is unchecked for the other query. Set both queries to populate the same range so that one query will overwrite the other in the Xcelsius spreadsheet.
Bind a toggle button to a cell e.g. A1
Back to the data connections again and set the "Refresh on trigger" trigger cell to A1. And set the "When Value Becomes" to either "On" or "Off" dependent on how you've set up the toggle button. Repeat for the other query.
Hope this helps,
Paul

An itab has been used as source for table control

Hi,
An itab has been used as source for table control without delete option of table control.
Now I need to delete the row which the mouse arrow is on.
Can I do this?
Thanks.

Hi Deniz,
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
    WHEN 'DEL'.
    remove marked lines
      LOOP AT it_tabctrl
              INTO wa_tabctrl
              WHERE marked EQ kc_sel.
        IF sy-subrc EQ 0.
          DELETE it_tabctrl INDEX sy-tabix.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT

How to open and read Excel Sheet from SharePoint 2013 Document Library using C# Visual Studio 2012

Hi,
To achieve these are the steps that I had followed :
1. Add the document Library path into Central Admin -> Application Mgmt -> Manage Service App -> Excel Service App -> Trusted File Locations
2. Add Documnet Library link to Trusted Connection Proivder
3. Open Visual Studio as Run as Administrator
4.Create an SharePoint 2013 Empty Project.
5.Add Service Reference : http:\\<server>\_vti_bin/excelservice.asmx
6.Service added successfully
7.Create a class file and add the Service Reference namespace
There is no such class as ExcelService to call.
Please let me know if somebody knows how to open the Excel file into C#(2012) either using ExcelService or any other way to open. I tried old methods of Sharepoint 2010 server but it's not able to access classes.
Requirement is :
Need to read the excel sheet from Document Library and transfer all data into DataTable.
Please help asap.

Hi,
This is the forum to discuss questions and feedback for Microsoft Office, I'll move your question to the SharePoint 2013 development forum
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/home?forum=sharepointdevelopment
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support

Sending an excel sheet of to mail Ids using file to mail scenario

Hello,
I have a folder with three folders archive exception and log. Log folders have the details of exception. I want the XML files that are in Exception, to be sent to resp email ids with the data in it to be stored in an excel sheet( data will be collected from the log file for the correspondng file in exception).
eg: if test.xml is in exception its log will have an exception detail somethng like " Enter a value".
In this case i want to give the exception details as well as some relevant details with it like material number etc , time at which the exception occured . These details are to be given in an excel sheet .
Is it possible to do using file to mail scenario. Please help by explianing the procedure.
Regards.

This can be done with the help of some Java and ABAP coding. I can give you a general view on how to do this.
1. Configure a file adapter for sender to pick up the exception files.
2. While doing the mapping, create a UDF to store the values (which you need to send it to excel file) in a table in ABAP Stack.
3. Create a ABAP Program in R3 (which can be schedule on regular intervals depending on ur req) to create an excel sheet based on the the data in the table (created in previous step). I am not sure how easy to code ABAP program to create an excel sheet.
4. Create one more file adapter to send this excel sheet to the corresponding mail ids.
This is a very high level view on doing this.

Excel Survey in SharePoint: is the responses file open for everyone?

If I make an Excel Survey in OneDrive for Business, is the Excel Workbook that contains the responses open for everybody? Because if it's not, are the users able to submit a survey?
Is there another way of doing an Excel survey where the responses will remain visible only for the author?

Hi,
According to your description, my understanding is that you want to make the responses that remain visible only for the survey owner/author. If yes, please try this: we might create a survey that others fill out just by
opening the link you provide. You’ll see everyone’s response compiled in one online spreadsheet.
For more detailed steps, please see these links:
https://support.office.com/en-us/article/Surveys-in-Excel-hosted-online-5fafd054-19f8-474c-97ec-b606fcda0ff9
http://blogs.office.com/2012/11/16/excel-surveys/
https://support.office.com/en-us/article/Manage-external-sharing-for-your-SharePoint-Online-environment-c8a462eb-0723-4b0b-8d0a-70feafe4be85?CorrelationId=9198bb1e-11ea-4728-a1ef-7cacb74597eb&ui=en-US&rs=en-US&ad=US
If you have any further question about Excel Survey in OneDrive for Business, I recommend you post the question to Office 365 forum:
http://community.office365.com/en-us/f/172.aspx
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Link ECC roles to Portal roles (Portal is using LDAP source for UME)

Hi all,
If a user is assigned a certain ECC ABAP role, they should also receive a related portal role. Our portal is using LDAP.
If our portal ume source was an ABAP system, I think it would be easy to achieve the ECC to ABAP role linkage.
We were thinking of developing a UME java webservice and have an ABAP proxy class consume it to allow our abap system to assign the correct portal role, and delete the portal role.
Any other ideas?

Rajendra,
Thx for your reply. Can you provide any more details as to the design of your solution with the web service? We are thinking of running a batch job nightly with a some mapping table in ECC to determine what ABAP role should link to the portal group then call the webservice to add the user to the portal group or delete the user from the portal group.
A second question is...does SAP Identity Manager offer any solution for this type of requirement?
Thanks

Data in excel sheet to be used for programing

Hi,
I have to make a z report for which the data i have to use is in a excel sheet.
How can I use this data for making different reports.
Reg,
Archana

Hi,
Try the following code for multiple sheets.
data : $i_intern type kcde_cells occurs 0 with header line.
data : $v_index type i.
data : $v_start_col type i value '1',
       $v_start_row type i value '1',
       $v_end_col   type i value '256',
       $v_end_row   type i value '7500'.
data: excel_tab type kcde_sender.
data: separator type c.
field-symbols: <field>.
data: application type ole2_object,
        workbook    type ole2_object,
        range       type ole2_object,
        worksheet   type ole2_object,
        worksheets type ole2_object,
        sheets      type ole2_object.
data: h_cell type ole2_object.
data: h_cell1 type ole2_object.
data: l_sheet           type c length 40.
data: l_active_sheet    type i.
define m_message.
    case sy-subrc.
      when 0.
      when 1.
        message id sy-msgid type sy-msgty number sy-msgno
                with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      when others. raise upload_ole.
    endcase.
end-of-definition.
Create Excel OLE2 object and open XLS file
if application-header = space or application-handle = -1.
    create object application 'Excel.Application'.
    m_message.
endif.
call method of application 'Workbooks' = workbook.
m_message.
call method of workbook 'Open' exporting #1 = pa_file.
m_message.
Show/don't show XLS
set property of application 'Visible' = 1.
m_message.
Determine number of sheets
call method of application 'Sheets' = sheets.
m_message.
call method of sheets 'Count' = sheetno.
m_message.
l_active_sheet = 0.
do sheetno times.
    clear: $i_intern[], excel_tab[].
    clear: it_vals[], it_chars[].
    l_active_sheet = l_active_sheet + 1.
Activate sheet number L_ACTIVE_SHEET
    call method of application 'Worksheets' = worksheets exporting #1 = l_active_sheet.
    m_message.
    call method of worksheets 'Activate'.
    m_message.
Get active sheet
    get property of application 'ACTIVESHEET' = worksheet.
    m_message.
Find start
    call method of worksheet 'Cells' = h_cell
      exporting #1 = $v_start_row #2 = $v_start_col.
    m_message.
Find end
    call method of worksheet 'Cells' = h_cell1
      exporting #1 = $v_end_row #2 = $v_end_col.
    m_message.
Create range
    call method of worksheet 'RANGE' = range
      exporting #1 = h_cell #2 = h_cell1.
    m_message.
Select range
    call method of range 'SELECT'.
    m_message.
copy to Clipboard
    call method of range 'COPY'.
    m_message.
    call function 'CONTROL_FLUSH'
      exceptions
        others = 3.
Import clipboard
    call function 'CLPB_IMPORT'
      tables
        data_tab   = excel_tab
      exceptions
        clpb_error = 1
        others     = 2.
    if sy-subrc <> 0. message x001(kx). endif.
    separator = cl_abap_char_utilities=>horizontal_tab.
    perform separated_to_intern_convert(saplkcde) tables excel_tab $i_intern
                                        using separator.
    set property of application 'CutCopyMode' = 0.
    m_message.
enddo.
call method of application 'QUIT'.
m_message.
free object : application,
                workbook,
                worksheet,
                sheets,
                range.
m_message.
Hope it works.
Please reward accordingly.
Thanks,
Priyanka

How to convert PDF image to excel sheet

Hi,
I am trying to convert the PDF image /Text file to Excel sheet then I need to use that data for my reports
Can you please let me know
1) How I can convert the PDF into a excel sheet
2) Which s/w i need to use for that(adobe s/w)
3) do need to purchse any other 3rd pary s/w to use this
s/w - software
PDF Image - scanned document in the image format
Regards
Shrinivas

You need Acrobat Standard or Pro to convert the scanned image to readable text (OCR) and then save it as a Excel file (if Acrobat recognizes that it's a table, which I doubt it will). Maybe there are some 3rd party plugins that can help you further.

Upload Excel File to SharePoint using VBA

Hi,
I copied and modified the code from a friend which he got it from this website forum.
This apprantely works for some people and not me. Please tell me what I am doing wrong.
Ignore xxxxxx part of the Sharepoint site. Nothing wrong with the site, i tried many combinations, but I get not response, not even an error.
Public Const HR_URL = "http://sun.xxxxxx.com/eng/st/Lists/Database%20Change% 20Request"
Sub test()
'Upload new Excel sheet to SharePoint
Call copyToSharePoint(HR_URL, ThisWorkbook.FullName)
End Sub
'''''''code block from Forum
Public Sub copyToSharePoint(sharepointURL As String, filePath As String)
'On Error GoTo errhandler
'sharePointUrl should not end in a "/"
'Initialize Variables
Dim LlFileLength As Long
Dim Lvarbin() As Byte
Dim LobjXML As Object
Dim LvarBinData As Variant
Dim LstrFileName As String, PstrFullfileName As String, PstrTargetURL As String
Dim fileName As String, lenFileName As Long
'Extract file name
lenFileName = Len(filePath) - InStrRev(filePath, "\")
fileName = Right(filePath, lenFileName)
'Check that the webUrl ends in an "/"
If Right(sharepointURL, 1) <> "/" Then
sharepointURL = sharepointURL & "/"
End If
'**************************** Upload binary files *****************
Set LobjXML = CreateObject("Microsoft.XMLHTTP")
PstrFullfileName = filePath
LlFileLength = FileLen(PstrFullfileName) - 1
' Read the file into a byte array.
ReDim Lvarbin(LlFileLength)
Open PstrFullfileName For Binary As #1
Get #1, , Lvarbin
Close #1
' Convert to variant to PUT.
LvarBinData = Lvarbin
PstrTargetURL = sharepointURL & fileName
' Put the data to the server; false means synchronous.
LobjXML.Open "PUT", PstrTargetURL, False
' Send the file in.
LobjXML.Send LvarBinData
Set LobjXML = Nothing
Exit Sub
errhandler:
If Err.Number = 53 Then
MsgBox "Excel was unable to create the HR file to submit to SharePoint. " & vbNewLine & _
"Please check that you are not running out of disk space and that no MS Office add-in is causing issues with Excel.", vbCritical, "File Error"
Exit Sub
Else
MsgBox "Your HR could not be submitted to SharePoint. The following error occurred:" & vbNewLine & _
"Error " & Err.Number & ": " & Err.Description, vbCritical, "Error Uploading to SharePoint"
Exit Sub
End If
End Sub

I have made the following code work successfully on a Windows 8 machine with the VBA executing from an Excel 2010 file and the file you want to upload going to a SharePoint 2010 site. If you don't need to use SP content types then simply
take that out of the code. Also, pay attention to the FieldInformation as the Field Display names and Field Internal names can sometimes be different. Cheers.
Public Sub copyDocToSP()
Const strLocalFile = "C:\temp\myLocalFile.pdf"
Const spBASE_URL = "https://thesharepointdomian/sites/yoursite/"
Const spDOC_LIB = "Your SP Doc Library Name"
Const spFILE_NAME = "FileNameOnceOnSharepoint.pdf"
Const spCONTENT_TYPE = "0x000000000000000000000000000000000000000"
Set ObjectStream = CreateObject("ADODB.Stream")
Set ObjectDOM = CreateObject("Microsoft.XMLDOM")
Set ObjectElement = ObjectDOM.createElement("TMP")
Set ObjectHTTP = CreateObject("Microsoft.XMLHTTP")
'Reading binary file
ObjectStream.Open
ObjectStream.Type = 1 'Type Binary
ObjectStream.LoadFromFile (strLocalFile)
BinaryFile = ObjectStream.Read()
ObjectStream.Close
'Conversion Base64
ObjectElement.DataType = "bin.base64" 'Type Base64
ObjectElement.nodeTypedValue = BinaryFile
EncodedFile = ObjectElement.Text
'Build request to load document
strURLService = spBASE_URL + "_vti_bin/copy.asmx"
strSOAPAction = "http://schemas.microsoft.com/sharepoint/soap/CopyIntoItems"
strSOAPCommand = "<?xml version='1.0' encoding='utf-8'?>" & _
"<soap:Envelope xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xsd='http://www.w3.org/2001/XMLSchema' xmlns:soap='http://schemas.xmlsoap.org/soap/envelope/'>" & _
"<soap:Body>" & _
"<CopyIntoItems xmlns='http://schemas.microsoft.com/sharepoint/soap/'>" & _
"<SourceUrl>" + strLocalFile + "</SourceUrl>" & _
"<DestinationUrls>" & _
"<string>" + spBASE_URL + spDOC_LIB + "/" + spFILE_NAME + "</string>" & _
"</DestinationUrls>" & _
"<Fields>" & _
"<FieldInformation Type='Text' InternalName='Title' DisplayName='Title' Value='this is the title value' />" & _
"<FieldInformation Type='Choice' InternalName='Our_x0020_Status' DisplayName='Our Document Status' Value='Ready-to-distribute' />" & _
"<FieldInformation Type='Text' InternalName='ContentTypeId' DisplayName='Content Type ID' Value='" + spCONTENT_TYPE + "' />" & _
"</Fields>" & _
"<Stream>" + EncodedFile + "</Stream>" & _
"</CopyIntoItems>" & _
"</soap:Body>" & _
"</soap:Envelope>"
ObjectHTTP.Open "Get", strURLService, False
ObjectHTTP.SetRequestHeader "Content-Type", "text/xml; charset=utf-8"
ObjectHTTP.SetRequestHeader "SOAPAction", strSOAPAction
ObjectHTTP.Send strSOAPCommand
MsgBox (ObjectHTTP.responseText)
End Sub

Create Excel sheet using OLE

Hi All,
       Can any one help me to create an multiple excel sheet in an work book using OLE. I want to create more than 3 sheets in excel, which is default sheets in excel when we one excel.

Hi,
Check the below sample code.
Here I'm downloading the same table twice into 2 different sheets for example purpose.
TYPE-POOLS ole2.
DATA: wf_cell_from TYPE ole2_object,
      wf_cell_from1 TYPE ole2_object,
      wf_cell_to    TYPE ole2_object,
      wf_cell_to1   TYPE ole2_object,
      wf_excel      TYPE ole2_object,   " Excel object
      wf_mapl       TYPE ole2_object,   " list of workbooks
      wf_map        TYPE ole2_object,   " workbook
      wf_worksheet TYPE ole2_object,   " Worksheet
      wf_cell       TYPE ole2_object,   " Cell Range
      wf_cell1      TYPE ole2_object,
      wf_range      TYPE ole2_object,   " Range of cells to be formatted
      wf_range2     TYPE ole2_object,
      wf_column1    TYPE ole2_object.   " Column to be Autofit
DATA: BEGIN OF t_hex,
      l_tab TYPE x,
      END OF t_hex.
DATA: wf_deli(1) TYPE c,            "delimiter
      wf_action TYPE i,
      wf_file TYPE string,
      wf_path TYPE string,
      wf_fullpath TYPE string.
TYPES: t_data1(1500) TYPE c,
       int_ty TYPE TABLE OF t_data1. "line type internal table
*All the data was prepared as line type internal tables for faster
*download
DATA: int_matl TYPE int_ty ,
      int_matl1 TYPE int_ty ,
      wa_matl   TYPE t_data1.
TYPES: BEGIN OF ty_mara,
       matnr TYPE matnr,
       mtart TYPE mtart,
       matkl TYPE matkl,
       meins TYPE meins,
       END OF ty_mara.
DATA: int_mara TYPE STANDARD TABLE OF ty_mara,
      wa_mara TYPE ty_mara.
FIELD-SYMBOLS: <fs> .
DATA: wc_sheets LIKE sy-index. "no.of sheets
DATA: it_tabemp TYPE filetable,
      gd_subrcemp TYPE i.
CONSTANTS wl_c09(2) TYPE n VALUE 09.
CLEAR wc_sheets.
DEFINE ole_check_error.
if &1 ne 0.
    message e001(zz) with &1.
    exit.
endif.
END-OF-DEFINITION.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
PARAMETERS: p_file   LIKE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK block1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
REFRESH: it_tabemp.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
      window_title         = 'Select File'
*      default_extension    = 'xls'
      default_file_name    = 'Material Details'
*      with_encoding        =
      file_filter          = '*.xls'
      initial_directory    = 'C:\'
      prompt_on_overwrite = ' '
    CHANGING
      filename             = wf_file
      path                 = wf_path
      fullpath             = wf_fullpath
      user_action          = wf_action
*      file_encoding        =
    EXCEPTIONS
      cntl_error           = 1
      error_no_gui         = 2
      not_supported_by_gui = 3
      OTHERS               = 4
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF wf_action EQ 9.
    MESSAGE 'No File have been Selected' TYPE 'S'.
ELSE.
    p_file = wf_fullpath.
    PERFORM create_excel.
ENDIF.
*&      Form create_excel
*       text
FORM create_excel.
LOOP AT it_tabemp INTO p_file.
ENDLOOP.
* START THE EXCEL APPLICATION
CREATE OBJECT wf_excel 'EXCEL.APPLICATION'.
PERFORM err_hdl.
* PUT EXCEL IN FRONT
SET PROPERTY OF wf_excel 'VISIBLE' = 1.
PERFORM err_hdl.
* CREATE AN EXCEL WORKBOOK OBJECT
CALL METHOD OF wf_excel 'WORKBOOKS' = wf_mapl.
PERFORM err_hdl.
SET PROPERTY OF wf_excel 'SheetsInNewWorkbook' = 3. "no of sheets
PERFORM err_hdl.
CALL METHOD OF wf_mapl 'ADD' = wf_map.
PERFORM err_hdl.
*Assign the Delimiter to field symbol.
ASSIGN wf_deli TO <fs> TYPE 'X'.
t_hex-l_tab = wl_c09.
<fs> = t_hex-l_tab.
CLEAR int_matl.
REFRESH int_matl.
SELECT matnr
       mtart
       matkl
       meins
      FROM mara
      INTO CORRESPONDING FIELDS OF TABLE int_mara.
*first the headings will be displayed in the excel sheet
CONCATENATE 'Material Number'
'Material type'
'Material Group'
'Base Unit of Measure'
INTO wa_matl
SEPARATED BY wf_deli.
APPEND wa_matl TO int_matl.
LOOP AT int_mara INTO wa_mara.
    CONCATENATE wa_mara-matnr
                wa_mara-mtart
                wa_mara-matkl
                wa_mara-meins
                INTO wa_matl
                SEPARATED BY wf_deli.
    APPEND wa_matl TO int_matl.
    CLEAR wa_matl.
ENDLOOP.
*Copyng thae same contents to another table to display in
*new sheet
MOVE int_matl TO int_matl1.
PERFORM f_material_details
TABLES int_matl
USING 1.
PERFORM f_material_details
TABLES int_matl
USING 2.
GET PROPERTY OF wf_excel 'ActiveSheet' = wf_map.
GET PROPERTY OF wf_excel 'ActiveWorkbook' = wf_mapl.
CALL FUNCTION 'FLUSH'
    EXCEPTIONS
      cntl_system_error = 1
      cntl_error        = 2
      OTHERS            = 3.
IF sy-subrc = 0.
    CALL METHOD OF wf_map 'SAVEAS'
      EXPORTING #1 = p_file.
ENDIF.
CALL METHOD OF wf_mapl 'CLOSE'.
CALL METHOD OF wf_excel 'QUIT'.
FREE OBJECT wf_mapl.
FREE OBJECT wf_map.
FREE OBJECT wf_excel.
ENDFORM.                    "create_excel
*&      Form ERR_HDL
*       text
FORM err_hdl.
IF sy-subrc <> 0.
    WRITE: / 'OLE ERROR: RETURN CODE ='(i10), sy-subrc.
    STOP.
ENDIF.
ENDFORM.                    "ERR_HDL
*-- End of Program
*&      Form f_material_details
*       text
* --> p1        text
* <-- p2        text
FORM f_material_details
   TABLES lint_matl
USING l_sheet_no TYPE i.
DATA: lv_lines TYPE i,
        lv_sheet_name(50) TYPE c.
wc_sheets = l_sheet_no.
CASE l_sheet_no.
    WHEN 1.
      lv_sheet_name = 'Material_sheet1'.
    WHEN 2.
      lv_sheet_name = 'Material_sheet2'.
ENDCASE.
*-- activating the worksheet and giving a name to it
CALL METHOD OF wf_excel 'WORKSHEETS' = wf_worksheet
    EXPORTING
    #1 = wc_sheets.
CALL METHOD OF wf_worksheet 'ACTIVATE'.
SET PROPERTY OF wf_worksheet 'NAME' = lv_sheet_name.
*--formatting the cells
CALL METHOD OF wf_excel 'Cells' = wf_cell_from
    EXPORTING
    #1 = 1
    #2 = 1.
DESCRIBE TABLE lint_matl LINES lv_lines.
CALL METHOD OF wf_excel 'Cells' = wf_cell_to
    EXPORTING
    #1 = lv_lines
    #2 = 4.
*--range of cells to be formatted (in this case 1 to 4)
CALL METHOD OF wf_excel 'Range' = wf_cell
    EXPORTING
    #1 = wf_cell_from
    #2 = wf_cell_to.
*--formatting the cells
CALL METHOD OF wf_excel 'Cells' = wf_cell_from1
    EXPORTING
    #1 = 1
    #2 = 1.
DESCRIBE TABLE lint_matl LINES lv_lines.
CALL METHOD OF wf_excel 'Cells' = wf_cell_to1
    EXPORTING
    #1 = lv_lines
    #2 = 1.
CALL METHOD OF wf_excel 'Range' = wf_cell1 " Cell range for first
                                              " column(Material)
    EXPORTING
    #1 = wf_cell_from1
    #2 = wf_cell_to1.
SET PROPERTY OF wf_cell1 'NumberFormat' = '@' . "To disply zeros
"in Material number
DATA l_rc TYPE i.
*DATA download into excel first sheet
CALL METHOD cl_gui_frontend_services=>clipboard_export
    IMPORTING
      data         = lint_matl[]
    CHANGING
      rc           = l_rc
    EXCEPTIONS
      cntl_error   = 1
      error_no_gui = 2
      OTHERS       = 4.
CALL METHOD OF wf_worksheet 'Paste'.
CALL METHOD OF wf_excel 'Columns' = wf_column1.
CALL METHOD OF wf_column1 'Autofit'.
FREE OBJECT wf_column1.
ENDFORM.                    " f_material_details
Regards,
Manoj Kumar P
Edited by: Manoj Kumar on Mar 5, 2009 11:25 AM

How to downlaod vednor master data into excel sheet in SAP Application ser

Hi friends
I want to download SAP vendor master data into excel sheet and the file should be stored in SAP Application server Location with padding zeros.
Please help me.
Thanks

Hi Ramesh,
You can download the data into application server using the following code. You will have the vendor details in the internal table. Then you will open a file and transfer the data as follows.
*   Download internal table to Application server file(Unix)
DATA: e_file like rlgrap-filename value '/usr/sap/tmp/file.txt'.
open dataset e_file for output in text mode.
lOOP AT it_datatab......
    transfer it_datatab to e_file.
ENDLOOP.
close dataset e_file.
In application server you will have only files and not excel sheets.
Reward points if useful,
Aleem.

How to populate the Quering data into Excel sheet in Oracle

Dear Guys,
How to populate the Quering data into Excel sheet in oracle.
Please provide a solution.
Thanks & Regards,
Senthil K Kumar

Hi
To make Excel sheets from sqlplus, you can use the markup html tag in sqlplus.
Here's an example.
Example
<code>
SET LINESIZE 4000
SET VERIFY OFF
SET FEEDBACK OFF
SET PAGESIZE 999
SET MARKUP HTML ON ENTMAP ON SPOOL ON PREFORMAT OFF
SPOOL c:\test_xls.xls
SELECT object_type
, SUBSTR( object_name, 1, 30 ) object
, created
, last_ddl_time
, status
FROM user_objects
ORDER BY 1, 2
SPOOL OFF
SET MARKUP HTML OFF ENTMAP OFF SPOOL OFF PREFORMAT ON
SET LINESIZE 2000 VERIFY ON FEEDBACK ON
</code>

Download into excel sheet

Hi All,
In a ALV report, i would like to donwload the final internal table into an excel sheet.
The requirement is that the data should be filled from 8th row of excel sheet.
I am using GUI_DOWNLOAD and it makes the data to dump from first line of excel sheet itself.
How to incorprate the logic for these requirements?
Your help will be sincerely appreciated.
Thanks in Advance,
Pavan
Edited by: Pavan Sanganal on Dec 16, 2008 10:51 AM

Hello Pavan,
I think you have written a separate sub-routine for this. Use another internal table IT_XLS which has a similar structure as the int. table for ALV display (IT_ALV, say).
Now try this piece of code:
DO 8 TIMES.
APPEND WA_XLS TO IT_XLS. "Populate 8 blank rows in the table
ENDDO.
LOOP AT IT_ALV INTO WA_ALV.
WA_XLS = WA_ALV.
APPEND WA_XLS TO IT_XLS.
CLEAR WA_XLS.
ENDLOOP.
Use GUI_DOWNLOAD to download IT_XLS. Can you please tell what do you want to populate in these 8 blank rows?
BR,
Suhas

Compare Server Names in Excel sheet from column1 with column 2 and exact matched server names should be saved in column 3 in same Excel sheet

Hi Guys,
First of all thanks in advance any help much appriciated.
I am new in scripting and excel, i am looking for below solution as my job requires daily work of this kind and i came to know by automating this work lots of time can be saved.
Compare Server Names in Excel sheet from column1 with column 2 and exact matched server names should be saved in column 3 in same Excel sheet.
Looking solutions first using excel i.e.vlookup itself so that it will not require any approval in my job else using powersell ,vbscript.
Once again Thanks for you guys.
/Regards
Nitesh24in

Hi Edward,
Thanks once again
I have only changed excel file path and after that this is saved as below , i am not sure which three lines should be together in one line. Please advise.
$excel = New-Object -ComObject Excel.Application
$Workbook = $excel.Workbooks.Add("F:\NewDocsToReadNitesh26-May2013\Excel\test.xls")
$WorkSheet = $Workbook.Worksheets.Item(1)
$WorkSheet.Activate() | Out-Null
For ($i=1;$i -le $worksheet.UsedRange.Rows.Count;$i++) {
If ($worksheet.cells.item($i,1).value2 -eq $worksheet.cells.item($i,2).value2) {
$worksheet.cells.item($i,3).value2 = $worksheet.cells.item($i,1).value2
}$Workbook.Save()$excel.Quit()[System.Runtime.InteropServices.Marshal]::ReleaseComObject([System.__ComObject]$excel) | Out-Null
Thanks and Regards
Nitesh24in

Excel sheet on sharepoint to be used as source for Xcelsius dashboard

Similar Messages

Maybe you are looking for