Sending email using Mail from T-Mobile Hot Spot
I cannot send email messages from a Hot Spot using the Mail program. It says it cannot send using the server smtp.mac.com. This is the first problem I've had with this. Today is my first day using a Hot Spot. Has anyone encountered this same issue? Do I have to change some of the settings?
I tried using the Internet based .Mac account and was able to send messages but not directly from Mail program.
5. Does T-Mobile provide me with an email account?
T-Mobile does not provide email accounts for its users.
6. Can I access my personal email account through my T-Mobile HotSpot account?
You can access any web-based email account such as Yahoo.com or Hotmail.com. You can also access corporate email accounts if your employer provides you with a virtual private network (VPN) client and a firewall. T-Mobile strongly recommends that its customers take measures to ensure the security of their wireless connections, such as virtual private networks (VPNs), encryption and firewalls. As with any wireless communication, the T-Mobile HotSpot service is not inherently secure and you should ensure you have adequate security safeguards in place. See the Hotspot Security Statement posted on our website for additional information concerning the security of the service and steps you can take to enhance the security of the service.
http://hotspot.t-mobile.com/support_faq.htm#U1
Similar Messages
-
I am unable to send emails using mail from my btinternet and yahoo accounts similar problem to others with mobile me accounts on lion any suggestions?
Do I need to delete all my email accounts and start again?
-
Sending Email using cl_bcs from a badi implementation
Hi,
I have written my code to send Email, inside AFTER_SAVE method of BADI Implementation of DOCUMENT_MAIN01.
Now this method of cl_bcs requires COMMIT WORK for the mail to be sent. And inside BADI implementation, we cannot write a COMMIT statement.
What is a workaround for this? While going through few other posts, I came across remote enabled FMs.
Is that the only way? Can I use some additions like STARTING NEW TASK etc. Following is the call used in case of cl_bcs:
CALL METHOD G_REF_SEND_REQUEST->SEND(
EXPORTING
I_WITH_ERROR_SCREEN = 'X'
RECEIVING
RESULT = G_SENT_TO_ALL ).
I also tried using SO_NEW_DOCUMENT_SEND_API1 STARTING NEW TASK and it works fine. But the subject length is a constraint their.
Please suggest.
Thanks in advance.Hi friend.
*& Report ZTEST_273068_EMAIL_CL_BCS
REPORT ZTEST_273068_EMAIL_CL_BCS.
CONSTANTS:
gc_subject TYPE so_obj_des VALUE 'ABAP Email with CL_BCS',
gc_raw TYPE char03 VALUE 'RAW'.
DATA:
gv_mlrec TYPE so_obj_nam,
gv_sent_to_all TYPE os_boolean,
gv_email TYPE adr6-smtp_addr,
gv_subject TYPE so_obj_des,
gv_text TYPE bcsy_text,
gr_send_request TYPE REF TO cl_bcs,
gr_bcs_exception TYPE REF TO cx_bcs,
gr_recipient TYPE REF TO if_recipient_bcs,
gr_sender TYPE REF TO cl_sapuser_bcs,
gr_document TYPE REF TO cl_document_bcs.
TRY.
"Create send request
gr_send_request = cl_bcs=>create_persistent( ).
"Email FROM...
gr_sender = cl_sapuser_bcs=>create( sy-uname ).
"Add sender to send request
CALL METHOD gr_send_request->set_sender
EXPORTING
i_sender = gr_sender.
"Email TO...
gv_email = '[email protected]'.
gr_recipient = cl_cam_address_bcs=>create_internet_address( gv_email ).
"Add recipient to send request
CALL METHOD gr_send_request->add_recipient
EXPORTING
i_recipient = gr_recipient
i_express = 'X'.
"Email BODY
APPEND 'Hello world! My first ABAP email!' TO gv_text.
gr_document = cl_document_bcs=>create_document(
i_type = gc_raw
i_text = gv_text
i_length = '12'
i_subject = gc_subject ).
"Add document to send request
CALL METHOD gr_send_request->set_document( gr_document ).
"Send email
CALL METHOD gr_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = gv_sent_to_all ).
IF gv_sent_to_all = 'X'.
WRITE 'Email sent!'.
ENDIF.
"Commit to send email
COMMIT WORK.
"Exception handling
CATCH cx_bcs INTO gr_bcs_exception.
WRITE:
'Error!',
'Error type:',
gr_bcs_exception->error_type.
ENDTRY.
Just Execute it.
Regards,
Thrimu -
Problem emailing using Mail from iPhoto.
When I email photos from iPhoto using Mail and have text under the photos some of the recipients receive the photos with the text superimposed onto the photo making it illegible. Is there some way to avoid this? If I send a copy to me everything is fine. I am not using any of the "fancy' templates in iPhoto, just plain photos with text.
Since posting this I found another post about this problem. The response to that post should solve my problem.
-
Upgraded to 10.4.9 now cant receive or send emails using Mail.app
I just upgraded to 10.4.9 from 10.2.8 and now the new Mail.app(v2.1) can't receive or send emails.
"Sent" emails only get to the Outbox for trying again later.
"Get Mail" is answered after 20 seconds with an error stating among other things "The attempt to read data from the server "xxx.xxx.xx.x" failed"
I connect to the internet through ethernet which is connected to my work's server setup. Ethernet is at the top of the list of the Network Config Options.
Tried removing the Mail preference file and reentering settings - after settings added, says the server cannot be found.
It's a Mail.app issue as accessing the web is no problem, sending and receiving mail using Eudora and Thunderbird is no problem.
The problem occurred after I went to 10.4.9 as I received an email in the short time I was on 10.4.6.
Tried reinstalling Mail from install disk but it didn't want to install an older version of the program it seems.
Any advice would be appreciated.
PowerMac G5 1.8Ghz Uniprocessor Mac OS X (10.4.9)Mac OS X 10.4.7 introduced connection issues in Mail similar to what you’re observing as a result of (according to the documentation) “Mail now supports connecting to mail servers through a SOCKS proxy”. If that’s the problem, it can usually be fixed by going to System Preferences > Network, choosing the network port configuration used to connect to Internet from the Show popup menu and disabling the SOCKS Proxy in the Proxies section, if it’s enabled.
And while you’re at it, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. -
Can I send email using Java from my localhost(Tomcat) with Internet connect
Hi friends,
Please tell me can I send email from my localhost (Tomcat) using Java when my computer is connected to Internet?
I don't have any SMTP username or password or the like, as I found in some codes available in net.
Please suggest and any simple code if possible.
Please don't send me the link of JavaMail API to read.
---SujoyThank you for the link. Though I have not tested the provided code, I will test it.
--Sujoy -
Sending email using mail that looks like a web page
I want to send an email that looks like a web page (kind of like those emails from apple or other companies). I tried making a document in Pages, but then that didn't quite work. Of course, I could make the pages document into a pdf file, but that's not ideal. Any recommended application?
Check Composing HTML messages in Apple Mail.
-
Error while sending email using TemplateEmailSender in CSC server
Hi,
We are trying to send email using TemplateEmailSender from CSC server. But it is giving Null Pointer Exception in ProfiledMessageSource like below. The same code is working fine in commerce instance but it is failing in CSC instance. We are using ATG2007.1p3
Any pointers would be helpful.
Below is the error.
Error while sending email
java.lang.NullPointerException
at atg.userprofiling.dms.ProfiledMessageSource.isConfiguredForProfileSubject(ProfiledMessageSource.java:196)
at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:864)
at atg.userprofiling.dms.DPSMessageSource.fireEndSessionMessage(DPSMessageSource.java:848)
at atg.userprofiling.SessionEventTrigger.nameContextElementPreUnbound(SessionEventTrigger.java:553)
at atg.nucleus.GenericContext.sendPreUnboundEvent(GenericContext.java:200)
at atg.nucleus.GenericContext.preNotifyRemovedObject(GenericContext.java:528)
at atg.nucleus.GenericContext.removeElement(GenericContext.java:566)
at atg.servlet.SessionNameContext.unbindFromNameContext(SessionNameContext.java:557)
at atg.servlet.SessionNameContext.stopSession(SessionNameContext.java:534)
at atg.servlet.SessionNameContext.decrementWrapperCount(SessionNameContext.java:242)
at atg.servlet.SessionBindingReporter.valueUnbound(SessionBindingReporter.java:206)
at org.apache.catalina.session.StandardSession.removeAttributeInternal(StandardSession.java:1625)
at org.apache.catalina.session.StandardSession.expire(StandardSession.java:749)
at org.apache.catalina.session.StandardSession.expire(StandardSession.java:655)
at org.apache.catalina.session.StandardSession.invalidate(StandardSession.java:1100)
at org.apache.catalina.session.StandardSessionFacade.invalidate(StandardSessionFacade.java:150)
at atg.userprofiling.email.TemplateInvoker$TemplateSession.endSession(TemplateInvoker.java:935)
at atg.userprofiling.email.TemplateEmailSender.createMessage(TemplateEmailSender.java:2387)Thanks for the reply.
My issue is fixed now. It is JBOSS configuration issue. Sessions are not maintained properly that's why we are getting NULL profile in the session. Our application has multiple WARs so we fixed it by setting emptySessionPath to TRUE. If emptySessionPath attribute in server.xml is false, then each WAR will have its own jsessionid cookie.
I did not touch ProfiledMessageSource as its required for session triggering. -
I am unable to send emails using iCloud, but am receiving.
I am unable to send emails using iCloud from both my laptop and my ipad. I am paying for 25Gb of storage and am only using 3Gb at the moment. I get the following message " Your email has been placed in the Outbox as you have exceeded your limit for sending emails". I have not sent any emails today at all!
http://support.apple.com/kb/ht4863
Or contact Apple: https://getsupport.apple.com -
Cannot send email in mail app. using POP account with Wi-Fi
I recently moved to an apartment that only has wireless internet access. Since moving I cannot send email using my POP account, although I can receive email. I was also not able to receive email using my .mac account, but I learned through this forum to change server port to 587 in .mac account and now I can send via .mac account in mail app. But I still cannot sent email with mail app. using my POP account. I changed no settings when I moved, and have never had this problem with cable. Any suggestions?
It all depends on the policy of whoever is the ISP at your new location and the method used by the outgoing (SMTP) server to determine whether you’re a legitimate user.
In an attempt to fight spam, many ISPs restrict the ability to send using an outgoing (SMTP) server not owned by them, usually by blocking port 25 for all traffic outside their own network, which means you cannot send with an SMTP server not owned by them if configured to use that port number. And it may happen the other way around as well, i.e. the outgoing server itself may look at the IP address you’re connecting from and refuse the connection if you’re outside its own network.
Something that often works is changing the outgoing server port to 587 (or whatever alternate port number the outgoing server listens to) instead of 25 and using some form of authentication in Preferences > Accounts > Account Information > Outgoing Mail Server > Server Settings, but two conditions must be satisfied for this change to work: (1) the ISP must not block that port as well AND (2) the outgoing server in question must listen to that port and accept a form of authentication not based on the IP address you’re connecting from.
Independent mail service providers not tied to a particular ISP, such as .Mac and Gmail, do allow authenticated SMTP access on port 587, which is the reason changing the outgoing server port number solves the problem for them if the ISP doesn’t block that port as well.
The following article, for example, describes several ways to address this issue in the case of .Mac, but can be useful for other mail accounts as well (not just .Mac), and applies to all versions of Mac OS X (not just Mac OS X 10.4.2 and earlier as the article states):
.Mac: Server timeout alert message when sending email -
Cannot receive/send emails via Mail on Mac using 10.6.8, keeps asking for password, very frustrating. Any ideas please? Regards
One more time, iCloud mail accounts are .me, .mac and .icloud. New ones are only .icloud.
iCloud mail is a standard Imap account that can be used with any mail client in existence. But You are talking about the ability to automatically setup an iCloud account in mail, which did not exist until 10.7.2.
You can use password or token authentification with iCloud mail (in Mail) it is your choice.
Set the account manually, set it as Imap, use imap.mail.me.com (no P number) for the incoming email and smtp.mail.me.com as the outgoing server.
The full settings (ports and security) are here. Use them and it will work, regardless of domain (mac, me and icloud addresses all use the same settings.
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud.
For more information on how to use this information with your email application, consult your application's documentation. -
I'm using Labview to send an e-mail from outlook and everytime I got a dialogue box which inform that a software is trying to send an e-mail. To send this e-mail I have to confirm operation. How can I avoid this dialogue box ?
I don't know what code you're using but the attached VI works with my version of Outlook and doesn't have any pop-up messages. I downloaded it from somewhere a while ago but don't remember where it was from.
Attachments:
Email_sender.vi 54 KB -
I receive a pop-up from ICal saying the server does not recognize my user name and password for my me.com email address. This started yesterday and occurs about every 5 minutes or so. There are no problems with receiving or sending email through Mail. I did change me email password several days ago but have no problems sending/receiving since then.
I fixed the problem. I opened Preferences in ICal and entered my new password. No more pop-ups
-
Problem with Thunderbird email:
When I send email using a mailing list, with my email included in the list, the message shows up in my Sent list and others receive it but it does not come to my email Inbox. The same problem occurs when I send the email to the mailing list addresses individually. When I send a simple test message to myself, I do receive it in my Inbox. Can you help me??
Bob GreenmanAre you using either cc or bcc? Is googlemail involved? Some email providers suppress cc's and bcc's to oneself since you will have a copy in your Sent folder.
-
Loss of sending email using WIFI
As of this morning 8-20-08, after updating to 2.02, I no longer am able to send emails using my own wireless network. Previously this was no problem. Neither Fido or Apple have any idea of what I am talking about. Fido washed their hands as they do not support WIFI. How convenient, they sell the phone and charge for the service but do not support it. Videotron, my ISP, thinks the issue is my wireless router but I can send via gmail so that's out. I resovled the problem by configuring my accounts to use my gmail smtp server as a second option and now the spinning wheel is short lived and messages are sent.
I'm sorry to say that I had fallen for all the hype about Apple but truth is they are but a Microsoft wannabe.
DisinchantedSo here's the wierd thing.
I was having the same problems. Set up SMTP for Videotron when at home using relais.videotron.ca SMTP with no authenticationon port 25 & all was good in the world. However when I went out, bang. Nothing. Couldn't send a mail for love nor money.
Thought aboutit & changed settings to use relais.videotron.ca SMTP, but this time using authentication of vltl** / password credentials with no SSL (Videotron doesn't use SSL) and again everything was fine. Of course, when I got home again, bang. Everything fell over & no more mail sending foe me!
So I figure, when I'm at home I'm on my trusted network at port 25, I don't need authentication and all is good, but when I'm out i'm seen as potential SPAM by port 25 on videotron & get blocked.
Tried using port 587 instead when for both home & mobile but had no luck either.
Then a strange thing happened. I'd resolved to having to set up 2 SMTP servers on my iPhone & switching between the two based on where I was. Pain in the a**, but there's always a trade off for early adopter technology So I set up my primary SMTP to use port 25 with no authentication, and a secondary server to use the same relais.videotron.ca outgoing server, but this time WITH authentication using vltl** \ password credentials.
After a walk to the shop when I'd been on my secondary SMTP server (successfully sending & recieving) I came home & inadvertantly forgot to swith back to my primary SMTP. Recieved a mail & then responded with no problem!
Net result, I now have a permanently switced off primary server & a permanently switched on secondary server which uses relais.videotron.ca details with vltl** \ password authentication credentials active (like I did on my old silver iPhone) & all is good in the world, both at home & out mobile, both for sending & recieving!
Will field test some more tomorrow but it may be a 2.0.2 bug where ther primary server details fcuk up whereas the secondary server details are stable.
So long as it works, who cares!
Jof
Maybe you are looking for
-
How do I install leopard on an external drive
I have been unable to install snow leopard on my external drive, when I put the install disc in the drive on the iMAC, it shows up on the desktop, but i cannot get it to install on the external drive, the iMAC has Lion installed.
-
Since updating my iPad to ios8, when I try to do a google search in safari, the search line is hidden by the keyboard. Is this a bug In the new iOS or can I fix it somehow?
-
Can't update the latest CC app (April 2015 - Photoshop CC2014 & BridgeCC)
Hi, I use Macbook with latest OS updated. I can't update the latest app (April 2015 - Photoshop CC2014 & BridgeCC). Every time i've tried, the error occurred as you can see images attached. I've also tried uninstall and reinstall both apps, but same
-
I have a Seagate expansion drive with files from my former pc. How do I transfer these files to my new iMac?
-
Can someone tell me his/her experience about a specific scenario in GL where he/she faced a problem and did something special in configuration/development in order to move from legacy to SAP system. I would appreciate the help and award suitable poin