Sending external email from forms

Hello.
I want to send an email using a form and a report. The report is the attachment of the email. I run the report from form using this command
v_rep := RUN_REPORT_OBJECT(repid);
If i send the mail to an internal address, works properly. If i want to send the email to an external address i have this error:
FRM-41214
Error when running report ORA - 0000: normal, successful completion
I made a check with telnet on my computer and i managed to send an mail to an external address.
Anyone has any idea?
Thanks.

I looked at the logs on the SMTP server, the extern mail doesn't even reach the SMTP server queue.
I enabled the trace for the report server and I get this error:
[2008/6/6 0:52:18:703] Exception 50152 (): Error while sending mail - Sending failed;
nested exception is:
javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.utility.Utility.newRWException(Utility.java:756)
at oracle.reports.server.MailService.send(MailService.java:492)
at oracle.reports.server.DesMail.sendFile(DesMail.java:186)
at oracle.reports.server.Destination.send(Destination.java:489)
at oracle.reports.server.JobObject.distribute(JobObject.java:1582)
at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2231)
at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:134)
at oracle.reports.server._EngineCommImplBase._invoke(_EngineCommImplBase.java:94)
at com.sun.corba.se.internal.corba.ServerDelegate.dispatch(ServerDelegate.java:353)
at com.sun.corba.se.internal.iiop.ORB.process(ORB.java:280)
at com.sun.corba.se.internal.iiop.RequestProcessor.process(RequestProcessor.java:81)
at com.sun.corba.se.internal.orbutil.ThreadPool$PooledThread.run(ThreadPool.java:106)
Thanks

Similar Messages

Sending external email from SAP with following requirements...

Hi All,
       I need to send external emails from SAP by meeting following requirements.
1) With subject line more than 100 characters.
2) No attachments, only body which has specific format (blueprint/layout) and would be amended often, hence code shouldn't be touched during amendments.
3) Should be able to know the success/failure of mail sending at program level.

Hi,
The code below demonstrates how to send an email to an external email address
*& Report ZSENDEMAIL                                                  *
*& Example of sending external email via SAPCONNECT                    *
REPORT zsendemail                    .
PARAMETERS: psubject(40) type c default 'Hello',
            p_email(40)   type c default '[email protected]' .
data:   it_packing_list like sopcklsti1 occurs 0 with header line,
        it_contents like solisti1 occurs 0 with header line,
        it_receivers like somlreci1 occurs 0 with header line,
        it_attachment like solisti1 occurs 0 with header line,
        gd_cnt type i,
        gd_sent_all(1) type c,
        gd_doc_data like sodocchgi1,
        gd_error type sy-subrc.
data:   it_message type standard table of SOLISTI1 initial size 0
                with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*&      Form POPULATE_MESSAGE_TABLE
      Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform.                    " POPULATE_MESSAGE_TABLE
*&      Form SEND_EMAIL_MESSAGE
      Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform.                    " SEND_EMAIL_MESSAGE
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
      submit rsconn01 with mode = 'INT'
                    with output = 'X'
                    and return.
endif.
endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM
Hope this helps.
Reward if helpful.
Regards,
Sipra

Sending an email from forms

hi all,
i need your help.i.e how to send an email from forms .we actually want that facility in our project.we are trying for that but not yet geting .please help me giving information about email in forms.
thank you in advance

If you are using Forms on the web, one of the most easiest way to do it is to use the Java mailing support from sun. You can load it into the rdbms 8i or later and use it. There is a step by stepp detailed description on
www.oracle.com > publications > Oracle Magazine > Ask Tom. If you just type java mail it will be between the first ten I suppose, it's a popular topic.
HTH,
Tamas

To send external email from ABAP

How to send external email from ABAP Program and what are the settings to be done for the same ?

Please check..
Sending External email through SAP
What is the FM for sending the external email through SAP by attaching layout set to it?
These are the FM for sending external email :-
SO_DOCUMENT_SEND_API1
SAPoffice: Send new document with attachments via RFC
SO_NEW_DOCUMENT_ATT_SEND_API1
(In 4.6C only, You can go to SE37 and click the documentation on how to use it. A sample program is provided there.)
SAPoffice: Send new document with attachments via RFC
Note : If you are using FM SO_NEW_DOCUMENT_ATT_SEND_API1 then Export Parameter DOCUMENT_DATA-OBJ_DESCR contains the Subject.
SO_NEW_DOCUMENT_SEND_API1
SAPoffice: Send new document
How to send a report to an external mail-id?
Try this sample code :-
REPORT ZREPORT_TO_EMAIL NO STANDARD PAGE HEADING LINE-SIZE 200.
DATA : BEGIN OF ITAB OCCURS 0,
PERNR LIKE PA0001-PERNR,
ENAME LIKE PA0001-ENAME,
END OF ITAB.
DATA: message_content LIKE soli OCCURS 10 WITH HEADER LINE,
receiver_list LIKE soos1 OCCURS 5 WITH HEADER LINE,
packing_list LIKE soxpl OCCURS 2 WITH HEADER LINE,
listobject LIKE abaplist OCCURS 10,
compressed_attachment LIKE soli OCCURS 100 WITH HEADER LINE,
w_object_hd_change LIKE sood1,
compressed_size LIKE sy-index.
START-OF-SELECTION.
SELECT PERNR ENAME
INTO CORRESPONDING FIELDS OF TABLE ITAB
FROM PA0001
WHERE PERNR < 50.
LOOP AT ITAB.
WRITE :/02 SY-VLINE , ITAB-PERNR, 15 SY-VLINE , ITAB-ENAME, 50
SY-VLINE.
ENDLOOP.
Receivers
receiver_list-recextnam = '[email protected]'. "-->
EMAIL ADDRESS
RECEIVER_list-RECESC = 'E'. "<-
RECEIVER_list-SNDART = 'INT'."<-
RECEIVER_list-SNDPRI = '1'."<-
APPEND receiver_list.
General data
w_object_hd_change-objla = sy-langu.
w_object_hd_change-objnam = 'Object name'.
w_object_hd_change-objsns = 'P'.
Mail subject
w_object_hd_change-objdes = 'Message subject'.
Mail body
APPEND 'Message content' TO message_content.
Attachment
CALL FUNCTION 'SAVE_LIST'
EXPORTING
list_index = '0'
TABLES
listobject = listobject.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
compressed_size = compressed_size
TABLES
in = listobject
out = compressed_attachment.
DESCRIBE TABLE compressed_attachment.
CLEAR packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 0.
packing_list-head_num = 0.
packing_list-body_start = 1.
packing_list-body_num = sy-tfill.
packing_list-objtp = 'ALI'.
packing_list-objnam = 'Object name'.
packing_list-objdes = 'Attachment description'.
packing_list-objlen = compressed_size.
APPEND packing_list.
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
object_hd_change = w_object_hd_change
object_type = 'RAW'
owner = sy-uname
TABLES
objcont = message_content
receivers = receiver_list
packing_list = packing_list
att_cont = compressed_attachment.

Cannot send external emails from SAP

Hi,
I am trying to set up emails to external systems, but for some reason it is not working. I have checked the port number for the SMTP server with the administrator and it is the default one, the SMTP server name, and also in SCOT the INT portion has a * in it.
I am able to send emails to internal domain (our work email domain) but when sending it to external domains, it keeps coming back with the error message " recipient unknown".
I have some doubts but am not sure if these should / could be the problem.
1. Is there a job that need to run periodically for sending emails.
2. Should there be a * in SCOT in the INT part ? or should it be @.com or something else.
3. Is there anything else that I am missing?
Platform : ECC 6.0
Thanks,
Kunal

Hi Adam,
Thanks for your reply. Here is what I have set up for the instructions you provided me.
1. In SCOT, menu 'Settings' --> 'Default Domain' I have my work domain set up.
Assume that I work for ebay.It is set up as ebay.com. I am able to send emails to [email protected] want to be able to send emails to other domains.
Question : Should I be setting up the name of the domain that I want to send emails to ? I dont think that this is feasible. But still I might be wrong.
2. Your SMTP server should have added this SAP server into its auth list.
Yes. I have checked on this with my SMTP administrator. The ip of that SAP server is in the authorization list.
3.A periodic job ( 2 minutes? 5 minutes? etc) should be defined for sending Emails automatically
I have the following jobs running when I go to jobs in SCOT
MAILSERVERSEND INT 5min 14:46:52
SAPCONNECT INT SEND 1 INT 10min 14:55:00
Is there any other job that needs to be running for this?
4.A '*' should be defined in 'SCOT' -->'INT' --> 'Internet' --> 'Address areas'
Yes, There is.
Thanks,
Kunal

Sending email from forms using 'from'

I'm trying to send an email from forms. It goes well, but I like to use the 'from' field from Outlook. How can I use it in OLE? I have searched everywhere, but can't find it.
It seems to me it is something like the way you do with BCC and CC options, but I haven't found a way to do the same thing with the From field. Can anyone help?
Thanks,
Pauline Kooy

Fabrizio,
Are you just sending the Line Feed character 'CHR(10)"? I typically send the Carrage Return character 'CHR(13)' as well. I'll create a variable called CRLF and assign the Carrage Return and Line Feed characters to this variable. Then reference the CRLF variable when I want to embed a new line.
For example:
DECLARE
   crlf         VARCHAR2(2) := chr(13)||chr(10);
   v_msg_body   VARCHAR2(2000);
BEGIN
   v_msg_body := 'lots of text here'||crlf;
END;Hope this helps.
Craig...

Send email from forms

Can anybody send me a code how to send an email from forms
with attachement for multiple users
I am using oracle 8i and forms 6i
My mail application is Novel group wise
Thanks for your help

Oracle Reports can be run directly to email.
Check out the DESTYPE parameter.
To send emails you can use a call to Java Mail using the Java importer. There is a sample form for this in the Oracle9i Forms demos. This should work in 6i also.
You might also be able to use email from the database with the UTL_SMTP package:
http://otn.oracle.com/sample_code/tech/pl_sql/htdocs/maildemo8i_sql.txt

How can i send emails from forms

I need to be able to send emails from forms 6.(assuming the pc is running Outlook) What is the best way of doing this? Would OLE or DDE control of Outlook be the easiest method?
If anyone has done this please let me know.

See:
iOS: Unable to send or receive email
I would Google for:
setup verizon email on phone
for the settings to use.

Help: how to send emails from FORMS?

Are there simple steps to send emails from FORMS?
Thank you in advance.
Jimmy

I'm sure there are many ways to send emails from Forms. Personally I never had to do this, but I can imagine following ways.
a) use UTL_SMTP-Package to send the email via your database
b) use a Java-Call
Peter

Sending external email via SAPCONNECT

Hi all,
I want to know how to send external email through sap.
Thanks in advance,
Manosh.

HI,
Try this code:
*& Report ZSENDEMAIL                                                  *
*& Example of sending external email via SAPCONNECT                    *
REPORT zsendemail                    .
PARAMETERS: psubject(40) type c default 'Hello',
            p_email(40)   type c default '[email protected]' .
data:   it_packing_list like sopcklsti1 occurs 0 with header line,
        it_contents like solisti1 occurs 0 with header line,
        it_receivers like somlreci1 occurs 0 with header line,
        it_attachment like solisti1 occurs 0 with header line,
        gd_cnt type i,
        gd_sent_all(1) type c,
        gd_doc_data like sodocchgi1,
        gd_error type sy-subrc.
data:   it_message type standard table of SOLISTI1 initial size 0
                with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*&      Form POPULATE_MESSAGE_TABLE
      Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform.                    " POPULATE_MESSAGE_TABLE
*&      Form SEND_EMAIL_MESSAGE
      Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       exporting
            document_data              = gd_doc_data
            put_in_outbox              = 'X'
       importing
            sent_to_all                = gd_sent_all
       tables
            packing_list               = it_packing_list
            contents_txt               = it_message
            receivers                  = it_receivers
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform.                    " SEND_EMAIL_MESSAGE
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
      submit rsconn01 with mode = 'INT'
                    with output = 'X'
                    and return.
endif.
endform.                    " INITIATE_MAIL_EXECUTE_PROGRAM
Reward points if found helpful....
Cheers,
Chandra Sekhar.

Please help in senplease help in smartform send external email send.

hii all,
pleaseeeeeeeee help in sending external email in smartform print program.
i need for RLB_INVOICE order confirmation to send thru email.
what to code in ZRLN_INVOICE . i copied RLB_INVOICE in zprog.
so what rthe changes i need to code in driver program?
pleaseeeeeeee help with sample coding..

Here is the code to send the Smartform to mail as PDF attachment.
*& Report ZTEST_PDF_MAIL
REPORT ZTEST_PDF_MAIL.
Internal Table declarations
DATA: I_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE,
I_TLINE TYPE TABLE OF TLINE WITH HEADER LINE,
I_RECEIVERS TYPE TABLE OF SOMLRECI1 WITH HEADER LINE,
I_RECORD LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
Objects to send mail.
I_OBJPACK LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
I_OBJTXT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
I_RECLIST LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
Work Area declarations
WA_OBJHEAD TYPE SOLI_TAB,
W_CTRLOP TYPE SSFCTRLOP,
W_COMPOP TYPE SSFCOMPOP,
W_RETURN TYPE SSFCRESCL,
WA_DOC_CHNG TYPE SODOCCHGI1,
W_DATA TYPE SODOCCHGI1,
WA_BUFFER TYPE STRING, "To convert from 132 to 255
Variables declarations
V_FORM_NAME TYPE RS38L_FNAM,
V_LEN_IN LIKE SOOD-OBJLEN,
V_LEN_OUT LIKE SOOD-OBJLEN,
V_LEN_OUTN TYPE I,
V_LINES_TXT TYPE I,
V_LINES_BIN TYPE I.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZTEST'
IMPORTING
FM_NAME = V_FORM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
W_CTRLOP-GETOTF = 'X'.
W_CTRLOP-NO_DIALOG = 'X'.
W_COMPOP-TDNOPREV = 'X'.
CALL FUNCTION V_FORM_NAME
EXPORTING
CONTROL_PARAMETERS = W_CTRLOP
OUTPUT_OPTIONS = W_COMPOP
USER_SETTINGS = 'X'
IMPORTING
JOB_OUTPUT_INFO = W_RETURN
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I_OTF[] = W_RETURN-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = V_LEN_IN
TABLES
OTF = I_OTF
LINES = I_TLINE
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
IF SY-SUBRC <> 0.
ENDIF.
LOOP AT I_TLINE.
TRANSLATE I_TLINE USING '~'.
CONCATENATE WA_BUFFER I_TLINE INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
I_RECORD = WA_BUFFER.
APPEND I_RECORD.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
Attachment
REFRESH: I_RECLIST,
I_OBJTXT,
I_OBJBIN,
I_OBJPACK.
CLEAR WA_OBJHEAD.
I_OBJBIN[] = I_RECORD[].
Create Message Body Title and Description
I_OBJTXT = 'test with pdf-Attachment!'.
APPEND I_OBJTXT.
DESCRIBE TABLE I_OBJTXT LINES V_LINES_TXT.
READ TABLE I_OBJTXT INDEX V_LINES_TXT.
WA_DOC_CHNG-OBJ_NAME = 'smartform'.
WA_DOC_CHNG-EXPIRY_DAT = SY-DATUM + 10.
WA_DOC_CHNG-OBJ_DESCR = 'smartform'.
WA_DOC_CHNG-SENSITIVTY = 'F'.
WA_DOC_CHNG-DOC_SIZE = V_LINES_TXT * 255.
Main Text
CLEAR I_OBJPACK-TRANSF_BIN.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
I_OBJPACK-BODY_NUM = V_LINES_TXT.
I_OBJPACK-DOC_TYPE = 'RAW'.
APPEND I_OBJPACK.
Attachment (pdf-Attachment)
I_OBJPACK-TRANSF_BIN = 'X'.
I_OBJPACK-HEAD_START = 1.
I_OBJPACK-HEAD_NUM = 0.
I_OBJPACK-BODY_START = 1.
DESCRIBE TABLE I_OBJBIN LINES V_LINES_BIN.
READ TABLE I_OBJBIN INDEX V_LINES_BIN.
I_OBJPACK-DOC_SIZE = V_LINES_BIN * 255 .
I_OBJPACK-BODY_NUM = V_LINES_BIN.
I_OBJPACK-DOC_TYPE = 'PDF'.
I_OBJPACK-OBJ_NAME = 'smart'.
I_OBJPACK-OBJ_DESCR = 'test'.
APPEND I_OBJPACK.
CLEAR I_RECLIST.
I_RECLIST-RECEIVER = '[email protected]'.
I_RECLIST-REC_TYPE = 'U'.
APPEND I_RECLIST.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
IF SY-SUBRC <> 0.
WRITE:/ 'Error When Sending the File', SY-SUBRC.
ELSE.
WRITE:/ 'Mail sent'.
ENDIF.
If you want to send some text as Body of the Mail then follow this once
when u r callin the FM'SO_NEW_DOCUMENT_ATT_SEND_API1'.. points to remember
1.u have to pass the body of content in table CONTENTS_TXT(ia m using I_OBJBIN) (each line a record) then. suppose i have appended 11 records to the table CONTENTS_TXT .
2.PACKING_LIST(iam usign I_OBJPACK) table u ahve to append a redord as follows
I_OBJPACK-TRANSF_BIN = ' '.
I_OBJPACK-HEAD_START = 000000000000001.
I_OBJPACK-HEAD_NUM = 000000000000001.
I_OBJPACK-BODY_START = 000000000000002
I_OBJPACK-BODY_NUM = 000000000000010.
I_OBJPACK-DOC_TYPE = 'RAW'.
append I_OBJPACK-.
by the above code system treat the first line in table I_OBJBIN as header and the 2nd line to 10 lines tread as body.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
DOCUMENT_DATA = WA_DOC_CHNG
PUT_IN_OUTBOX = 'X'
TABLES
PACKING_LIST = I_OBJPACK
OBJECT_HEADER = WA_OBJHEAD
CONTENTS_BIN = I_OBJBIN
CONTENTS_TXT = I_OBJTXT
RECEIVERS = I_RECLIST
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
regards,
srinivas

TS3899 I can't send any emails from my iphone when I was outside of my house

I cannot send any emails from my iphone when I'm out.
How can I solve this problem?

According to AOL they support IE, Firefox, and Safari: http://help.aol.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&extern alId=73451
Have you tried contacting there support to see if they are aware of the issue: http://help.aol.com/help/microsites/microsite.do

Email from Forms 6i

Does anyone know how to send an email from a form on the web?

Andreas,
If my understanding is correct, both UTL_MAIL and UTL_SMTP will basically create a string that will be placed
in <to>,<cc>,etc. MS Outlook as, I believe, any other email has a limitation on the number of characters that can be placed in any of the fields. MS Outlook is limited to about 2000 characters in <bcc> (and in <cc> and <to> fields. It means if one email consist of 30 char, I can't place more than 60 emails in <bcc>. I will have to place about 500-1000 emails. What do you think about another approach: make the form create an Excel file which contains all emails and call it 'bcc emails'. Than place 'bcc emails' line into <bcc> section of the email.
There probably is a mechanism built in Outlook email that will recognize a referral to 'bcc email' and take the corresponding emails from the excel file.
I know, you use different default email.
Will your email handle the situation?
What would you do if you had to send mass emails from Oracle where number of emails is huge?
Thanks. Lev.

How to send formatted mail from form 6i

Hi,
There is requirment in my project to send formatted mail from form 6i.The database used in 9i.In normal form we can send normal mail.However our requirment is such that the mail content should have company logao pics and it should display data in coloured format based on data fetched from database.How can this be done.
l

What method are you using to send email from your form now? If you are using UTL_SMTP, you can set the MIME_TYPE = 'HTML' as Francois suggests. If you are using an OLE call to Outlook or a email JavaBean? The method you use to send email will dictate how you send Rich Text/HTML email messages.
Craig...

Email from forms 45

I want to send email from forms 45 .
how can I do it.
appreciate any help on this

<BLOCKQUOTE>quote:<HR>Originally posted by jilla:
I want to send email from forms 45 .
how can I do it.
appreciate any help on this<HR></BLOCKQUOTE>
To send the mail from within a program unit/trigger, you will have to find out the mail batch command for the mail program that you are using eg. Microsoft Mail. If you are not sure, contact whoever created the mail program. Next, use TEXT_IO (built-in package) or some other method to write to the 'control' file that will be the email file you will send. Once you have done this you will need to invoke the HOST command, passing the mail batch command as a parameter to it.
It is possible to write to an error file to see why the email was not sent, if this so happens. Again this file (any name you like to give it) will be a parameter to the mail batch command.
To test if the mail was sent, write code like the following:
procedure send_mail is
l_file text_io.file_type;
l_buffer varchar2(2000);
l_mail_command varchar2(1000);
begin
/* Send mail */
host(l_mail_command);
/* Check if mail was sent */
l_file := text_io.fopen('c:\temp\mailerr.err','r');
text_io.get_line(l_file,l_buffer);
/* If there is data in this file display message to user, using an alert for example */
exception
when no_data_found
then
text_io.fclose(l_file);
end;
One other point. When you are creating your 'control' file, make sure you precede the email address of the recipient with 'SMTP:'.
I hope this helps.

Sending external email from forms

Similar Messages

Maybe you are looking for