Sending Keys through VM Console incorrect Ascii mapping (openSUSE)?

Hi All,
I'm using a Hyper-V environment, and using Powershell to send keys via the console to the SUSE VM for setup
scripting. This all works fine with CentOS, Debian, Fedora and Ubuntu.
However, with SUSE 13 when I sent keys from powershell using the following commands:
$VMConsole = Connect-VMConsole
$KB = $VMConsole.VSMKB
$KB.TypeText("root")
It does not work. On further investigation I found that using TypeKey or TypeText it sends the keystrokes using
standard ascii table as found at:http://www.bluesock.org/~willg/dev/ascii.html
However, SUSE interprets using a different ascii table, found at: http://msdn.microsoft.com/en-us/library/windows/desktop/dd375731(v=vs.85).aspx
I can provide this by sending:
$KB.TypeKey(0x6B)
This produces the character + on the console.
Whereas, it should produce the character: k
This only seems to happen on OpenSUSE (at least it doesn’t happen on CentOS, Ubuntu, Debian or Fedora).
Have you got any ideas? I’ve tried resetting the keyboard to US layout on the SUSE VM, and I’ve also tried
using loadkeys us.
Cheers
Will

Hi Will,
Sorry that mistake .
You are using deploylinuxVM powershell , right?
In its fuctions I found this class " Msvm_Keyboard " , it has methods "
TypeText " and " TypeKey "
TypeText method of the Msvm_Keyboard class
"Simulates a series of typed ASCII characters. This routine may not be used to simulate the input of non-ASCII characters."
Parameters
asciiText [in]
Type: string
The series of ASCII text characters to type.
TypeKey method of the Msvm_Keyboard class
“Simulates a press-release key sequence."
Parameters
keyCode [in]
Type: uint32
The virtual key code of the key to press. For the list for virtual-key codes, see
Virtual-Key Codes.
As you mentioned :
"$KB.TypeKey(0x6B)
This produces the character + on the console."
It seems Method Typekey invoked the Virtual-Key Codes
not Ascii .
Hope this helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Problems sending pictures through BBM

Device info
Your carrier: SaskTel
Model info and OS version: Tour 9630 v5.0.0.419
Apps and free space
File free before and after: 50725263 Bytes Before; 78361895 Bytes After
Did a battery pull fix your issue? NO
Apps installed and their version if possible:
Third Party
Blocked Traffic Free 2.3
FourSquare 1.9.9
Imagining Theme 2.0
Media Player 1.0.5
MySask411 1.2
Pixelated 2.4
ScoreMobile for BlackBerry 1.7
WeatherEye 2.0.2.6
Add-on
BlackBerry App World 2.0.1.12
BlackBerry Application Centre 5.0.0
BlackBerry Maps 5.0.0
BlackBerry Messenger 5.0.0
BrickBreaker 5.0.0
Documents To Go 1.008.012
eBay 1.0.3.5
Help 5.0.0
Klondike 1.4.8
MemoPad 5.0.0
Password Keeper 5.0.0
Sudoku 1.0.11
Tasks 5.0.0
Texas Hold'Em King 2 2.3.0
Word Mole 5.0.0
Question
I have recently tried sending pictures through BBM to other contacts with various BlackBerry devices. There seems to be a problem when trying to send pictures that I have saved on my memory card (Lexar 8GB MicroSD) that have been sourced from the internet (via the Mobile Browser). The pictures have been saved from websites such as wikipedia and facebook and I haven't been able to send any of the pictures over BBM. I also tried saving other pictures from the internet to my computer and transferring them onto my memory card with a USB cord and then trying to send the pictures with BBM; same result: they would not send.
There are two processes I have followed and they are detailed below:
1) Through BBM Chat Window
- Conversation window with contact is open
- Hit Menu Key > Send Picture
- Picture Selected
- Set Caption window displayed, caption selected. Press Send
- Select Image Size window displayed
- Image Size selected (I've tried selecting different image sizes with no change in result)
- Press OK
- Nothing happens, screen returns normal. No loading sign, nothing. Its like nothing ever happened
2) Through Media Browser
- Picture Selected in Browser
- Hit Menu Key > Send or Share > Send to Messenger Contact
- Dialogue Box appears: "Send File 'file name here' to Contact Name"
- Select OK
- Select Image Size window displayed
- Image Size Selected (I've tried selecting different image sizes with no change in result)
- Press OK
- Nothing happens, screen returns normal. No loading sign, nothing. Its like nothing ever happened
Also this ONLY happens when I'm trying to send pictures that have been saved from the internet (through mobile browser). Pictures that I have taken with the camera have always sent to contacts fine, please note that pictures from the camera are saved to the same memory card (Lexar 4GB MicroSD).
If you can provide any insight to this recurring problem, or need more explanation/information, please reply!
Thanks,
Stefan

taniabergh wrote:
It gives me an error that says "Upload failed: Jsonexeption: Jsonobject text must begin with '{' at character 1 of http/1.1 501 not implemented Connection: close server: Whatsapp-mms/2 content-length: 41 Content-type: text/html."
I've never seen that error before. I suggest you do a backup first, Ensure the BlackBerry smartphone is running the most current version of BlackBerry Device Software. For more information on updating the BlackBerry Device Software, see KB16068.
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

Can't send email through my aol mail on my iPad 2 after updating to iOS 7

I had to update m iPad because I was no longer able to work a lot of my apps because they kept telling me that there was an update that I had to do in order to even work my apps! I was very reluctant to do it in the first place fearing that I would loose a lot of my pics, videos and or more! Anyway so the other day I sat down and finally did it. After updating my iPad 2 to the new operating system of iOS 7 now I cannot send emails through my aol mail on my iPad. I tried putzing with the settings for smtp and to no avail nothing, I then decided well maybe downloading the aol app would help but still not good enough because it takes up so much room that I had to delete some apps just to get it. I had since deleted the aol app and am still trying to figure out why I keep getting the message I am getting is incorrect] hen it gives me two options which are option 1) Settings and option 2) Cancel. I am in need of assistance here because I can receive mail but cannot send it. Oh and I am able to send mail through my other email addresses on my iPad mail including my me.com and iCloud.com as well as two others but am not able to send through aol. I am loosing my patience with apple very quickly as one why did I have to update the system and why am I forced to update my apps which I feel is completely ridiculous in the first place. Everything was fine until I had to do that and now I cannot keep my iPad on for more then an hour when the battery drains so quickly now because I guess it takes up so much unneeded space! PLEASE HELP ME!
<Email Edited by Host>

Hello, PriestessJeanann.
Thank you for visiting Apple Support Communities.
Here is an article I would recommend going through when experiencing issues with mail. The usual fix would be to delete the email account in question and add this account via the preset AOL option. I would also recommend checking with your email provider for security procedures such as two-step verification as this could cause this issue.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Cheers,
Jason H.

Key Generation in console

Hi Folks,
I have defined key generation in console .I need some information in key generation such as ,if i define None ,range and Qualifed Range.
Where it effect and what are significance of it.
Secondaly., We create clone in Import manager and then we do mapping to remote key to the clone of the main table. I am looking for the business significance and techanical signifiance of it.
Thanks in advance,
Rohit

Hi Rohit,
If you choose
NONE: - Then remote key will not be generated automatically and has to be applied explicitly either using import manager or in data manager.
RANGE: - Here we can specify a range using TO and FROM. This generates the key automatically for that client between that range.
Qualified range: - Here we specify a range for a qualified table for key generation.
Keys are generated on a per value basis i.e. MDM automatically generates keys for the specified single-valued lookup field based on values you specify
using the Range property. You can specify Qualified Range values by selecting the
single-valued lookup field from the drop-down list and specifying From
and To values for each lookup table value.
Let me know if this helped your cause.
BR,
Siddharth

How to send sms through java program?

hi,
i am trying to send sms through java program.i am usining ubuntu 6.04.i am using modem MC35i.i use the jSMSEnjine.jar and rxtxcomm.jar.
these are the following program.
import org.jsmsengine.*;
import java.util.*;
class SendMessage
     public static void main(String[] args)
          int status;
          // Create jSMSEngine service.
     CService srv = new CService("Com2",9600);
          //CService srv = new CService("COM2",9600);
          System.out.println();
          System.out.println("SendMessage(): sample application.");
          System.out.println(" Using " + srv._name + " " + srv._version);
          System.out.println();
          try
               //     Initialize service.
               srv.initialize();
               Thread thread =Thread.currentThread();
               thread.sleep(1000);
               System.out.println(srv);
               //     Set the cache directory.
               srv.setCacheDir(".\\");
               //     Set the phonebook.
               //     srv.setPhoneBook("../misc/phonebook.xml");
               //     Connect to GSM device.
               status = srv.connect();
               //     Did we connect ok?
               int st=CService.ERR_OK;
               System.out.println(st);
               System.out.println(status);
               if (status == CService.ERR_OK)
                    //     Set the operation mode to PDU - default is ASCII.
                    srv.setOperationMode(CService.MODE_PDU);
                    // Set the SMSC number (set to default).
                    srv.setSmscNumber("");
                    //     Print out GSM device info...
                    System.out.println("Mobile Device Information: ");
                    System.out.println("     Manufacturer : " + srv.getDeviceInfo().getManufacturer());
                    System.out.println("     Model : " + srv.getDeviceInfo().getModel());
                    System.out.println("     Serial No : " + srv.getDeviceInfo().getSerialNo());
                    System.out.println("     IMSI : " + srv.getDeviceInfo().getImsi());
                    System.out.println("     S/W Version : " + srv.getDeviceInfo().getSwVersion());
                    System.out.println("     Battery Level : " + srv.getDeviceInfo().getBatteryLevel() + "%");
                    System.out.println("     Signal Level : " + srv.getDeviceInfo().getSignalLevel() + "%");
                    //     Create a COutgoingMessage object and dispatch it.
                    //     *** Please update the phone number with one of your choice ***
// String smsLengthTest="Hi"+"\nTesting is going on.Test for sending unlimited number of charecter.So you will get N number of SMS.Initially I trancate the whole string by 70 charecter.Later I will put it upto 90 charecter.Some chararecter should kept for header portion.I don't know the total number.It is just test.If you got the sms u should appreciate me...This is Ripon...I have written sms program";
String smsLengthTest="Hi\n"+"This is Govindo";
int mao=smsLengthTest.length();
System.out.println("Length of sms :"+mao);
String smsNo="9433314095";
smsNo="+91"+smsNo;
if(mao<70)
COutgoingMessage msg = new COutgoingMessage(smsNo,smsLengthTest);
//     Character set is 7bit by default - lets make it UNICODE :)
//     We can do this, because we are in PDU mode (look at line 63). When in ASCII mode,
//          this does not make ANY difference...
msg.setMessageEncoding(CMessage.MESSAGE_ENCODING_UNICODE);
if (srv.sendMessage(msg) == CService.ERR_OK) System.out.println("Message Sent!");
else System.out.println("Message Failed!");
else
// COutgoingMessage msg = new COutgoingMessage(smsNo,smsLengthTest);
// LinkedList messageList;
// messageList = new LinkedList();
// messageList.add(msg);
// LinkedList maooo=new LinkedList();
// maooo=srv.splitLargeMessages(messageList);
int sizelength=0;
int counter=0;
sizelength=smsLengthTest.length();
System.out.println("SMS length :"+sizelength);
int smsCntr=sizelength/70;
System.out.println("smsCntr :"+smsCntr);
counter=smsCntr+1;
int j=70;
int k=0;
try
for(int i=0;i<smsCntr;i++)
String test="";
test=test+i;
test=smsLengthTest.substring(k,j);
System.out.println(test);
System.out.println(test.length());
COutgoingMessage msg = new COutgoingMessage(smsNo, test);
System.out.println("hi this is suman" + smsNo);
//     Character set is 7bit by default - lets make it UNICODE :)
//     We can do this, because we are in PDU mode (look at line 63). When in ASCII mode,
//          this does not make ANY difference...
msg.setMessageEncoding(CMessage.MESSAGE_ENCODING_UNICODE);
if (srv.sendMessage(msg) == CService.ERR_OK) System.out.println("Message Sent!");
else System.out.println("Message Failed!");
k=k+70;
j=j+70;
catch(Exception e)
System.out.println("Error...1");
e.printStackTrace();
e.getMessage();
String lastPortion=smsLengthTest.substring(k);
System.out.println(lastPortion);
COutgoingMessage msg = new COutgoingMessage(smsNo, lastPortion);
//     Character set is 7bit by default - lets make it UNICODE :)
//     We can do this, because we are in PDU mode (look at line 63). When in ASCII mode,
//          this does not make ANY difference...
msg.setMessageEncoding(CMessage.MESSAGE_ENCODING_UNICODE);
if (srv.sendMessage(msg) == CService.ERR_OK) System.out.println("Message Sent!");
else System.out.println("Message Failed!");
                    // Disconnect from GSM device.
                    srv.disconnect();
               else System.out.println("Connection to mobile failed, error: " + status);
          catch (Exception e)
               e.printStackTrace();
          System.exit(0);
the error is:
SendMessage(): sample application.
Using jSMSEngine API 1.2.6 (B1)
org.jsmsengine.CService@addbf1
0
-101
Connection to mobile failed, error: -101
please help me,its very urgent.

come back in about 5 years, we may have time for you by then.
In the meantime, how about contacting the people who wrote that library and asking them nicely for help (rather than trying to order people to drop whatever they're doing and jump through hoops to accommodate your every wish as you're doing here)?

Weblogic 10 doesn't start through admin console

Hi,
While starting a managed server on WebLogic 10.3 through the admin console I get the below error. However when starting the same managed server with a script I can successfully start it up.
<Sep 30, 2010 10:31:52 AM EEST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://10.123.456.78:7001.>
<Sep 30, 2010 10:31:52 AM EEST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Sep 30, 2010 10:31:52 AM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Sep 30, 2010 10:31:55 AM EEST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
java.lang.AssertionError: Could not obtain the localhost address. The most likely cause is an error in the network configuration of this machine.
     at weblogic.server.channels.AddressUtils$AddressMaker.getLocalHost(AddressUtils.java:40)
     at weblogic.server.channels.AddressUtils$AddressMaker.<clinit>(AddressUtils.java:35)
     at weblogic.server.channels.AddressUtils.getIPAny(AddressUtils.java:105)
     at weblogic.protocol.configuration.ChannelHelper.checkConsistency(ChannelHelper.java:60)
     at weblogic.server.channels.ChannelService.start(ChannelService.java:197)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
java.net.UnknownHostException: myServer: myServer
     at java.net.InetAddress.getLocalHost(InetAddress.java:1353)
     at weblogic.server.channels.AddressUtils$AddressMaker.getLocalHost(AddressUtils.java:38)
     at weblogic.server.channels.AddressUtils$AddressMaker.<clinit>(AddressUtils.java:35)
     at weblogic.server.channels.AddressUtils.getIPAny(AddressUtils.java:105)
     at weblogic.protocol.configuration.ChannelHelper.checkConsistency(ChannelHelper.java:60)
     at weblogic.server.channels.ChannelService.start(ChannelService.java:197)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
The environment had been up and running for many months, have done many successfull restarts occasionally. But after an ungraceful shutdown (database connection was down and managed server wouldn't shutdown through admin console) of the managed server & admin server, the startup through admin console stopped working. No configurations had been modified and we have two other systems working with similar configurations.
The log is stating that "<The admin server could not be reached at http://10.123.456.78:7001.>" but it actually is listening at that IP and port and I can connect to it with other means. I'm able to ping the hostname, IP, localhost etc... and network connection shouldn't be an issue even though the log states so.
Does anyone have any ideas what is broken? Thanks for any help in advance!

Hi,
With script I meant the startManagedWebLogic.cmd script (on Windows). The managed server is running on the same machine as the admin server.
The hosts file has also been checked, it has the same content as two other environments which are working fine. But anyway we tried adding the IP & hostname there, but it didn't fix the issue. Nothing is wrong with the DNS either.
I'm also able to ping the address:port, with the command you gave I get the following result:
Sending 1 ping of 100 bytes.
RTT = ~0 milliseconds, or ~0 milliseconds/packet
When I'm trying to restart the managed server through admin console (on my laptop), I can see on the server side that there is a connection to the IP:port of admin server from my laptop's IP:
C:\>netstat -an | grep 7001
TCP 10.123.456.78:7001 0.0.0.0:0 LISTENING
TCP 10.123.456.78:7001 10.164.51.33:3965 ESTABLISHED
I again want to say that no changes have been done to any configurations in the environment. It was working fine before the "ungraceful" shutdown, where the connection to DB (that the managed server uses) was down and neither the managed or admin server would shutdown through admin console, but were shutdown by closing the cmd prompt window(used to start admin server) and java.exe task from taskmgr (managed server).

I can't send photos through iChat/Messages?

Hello! I have a MacBook Pro and I can't seem to send photos through iChat to my friends. I am able to receive photos, though. I can drag a photo into the message box and I can click send and it looks as if I've successfully sent the photo. However, after a few seconds, the message bubble becomes blank and a picture is no longer there and my friend tells me she can't see anything. I've updated to Mountain Lion but I still can't send photos through Messages. Does anyone have any idea why? Thank you in advance!

Hi,
The Messages app in Mountain Lion is a fusion of iChat (which uses AIM Screen Names and Jabber IDs to create Buddy Lists) and iMessages from the iOS side of things.
iMessages can be sent if you register your Apple ID for iMessages when opening Messages for the first time.
The same Apple ID is then used on your iOS devices (iPads, iPhones and some iPod Touch devices) so that you can sync the conversations you are having.
iChat is /was an app in Lion and earlier Mac OS version that could join the AIM or Jabber Service (And the Yahoo service in iChat 6 in Lion).
In those versions Buddy List were displayed by default.
In Messages the default is to display any Non iMessage Accounts (Seen in Messages Menu > Preferences > Accounts.) as one list, which can be brought to the front by the Keystrokes CMD + 1 keys together (See Window Menu)
You can separate the Buddy lists by going to Message Menu > Preferences > General section and unticking the items that say about gathering accounts into one list.
Uploaded with Skitch!
This changes the Window Menu to then list all the Buddy lists, each with their own CMD + #
Uploaded with Skitch!
As you can see I have an Account callled Google talk (And another that logs in to Jabber.me)
The Names shown here are what you enter in to the Description field in Messages menu > Preferences > Accounts.
If you enter nothing and have one account that logs in to AIM and another that logs in to Google the Account Buddy List window will get titled "AIM Buddy List" and Jabber Buddy List as Google run a Jabber server.
If you have more, like I do, of both sorts then they take on the Screen Name or ID of the account if you don't fill in the Description field.
(The Partially Blocked out one is doing this as it is an AIM registered Name)
If your Apple ID happens to be your Google Mail ID and you have set it up for iMessages it also needs setting up for the "iChat" Google Talk side (it may be already there if updating from Lion)
However you cannot send iMessages to your Google Buddies or vice versa - sending IMs from your Google Buddy list to Contact's Apple IDs
So make sure the Messages window is saying you are using iMessages if talking to Contacts or your IM account type (or name/ID) if using Buddy lists.
If your Apple ID can also be used with the AIM or Jabber services then double check what you have set up in Messages > Preferences > Accounts and which you ware using.
7:23 PM Sunday; August 26, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can't access msg server instance through admin console

I am running
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS cosmos.scranton.edu 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-V245
along with [20/Feb/2008:14:39:46 -0500] - Sun Java(TM) System Directory Server/5.2_Patch_4 B2005.230.0041 (64-bit) as the config DS
The console webserver is
[20/Feb/2008:14:42:00] info (26032): SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
and
# ./mpsadmconfig -version
Administration Server Command Line (admconfig) version 5.2
Copyright (c) 2001 Sun Microsystems, Inc.
I can manage the DS through the Console just fine. If I try to access the msg server nothing happens.
I see the following error in the ds admin-serv/logs/error log
[21/Feb/2008:08:41:35] warning (26033): for host ::ffff:134.198.6.4 trying to GET /msg-config/tasks/operation/cgi_root, send-cgi reports: cannot find CGI program /opt/luminis/products/ds/bin/msg/admin/bin/cgi_root (No such file or directory)
This cgi_root file is a pointer to /opt/luminis/products/mail/lib/cgimsg which does not exist
It applied patch 115610-25 which (I'm under the impression) has the Admin console in it. It didn't fix it though
So, does anyone know of a patch that just has the Admin Server / Console or does anyone running 32 bit Sparc Solaris 10 have a cgimsg file they can lend me? (I'll give it right back!)

chris_krall1 wrote:
I can't argue with that Shane. Well you can argue but there isn't anything I can do about it unfortunately. The decision to stop using the admin console was a 'big-picture' sort of deal.
Well sort of - this didn't work when I first installed msg 6.2-4.04. The core patch 6.3-5.02 (120228-25) was applied through smpatch more or less inadvertently. Anyway I guess I will have to learn the command line interface. I really only wish to apply certs to the various services and turn on ssl
I was able to request and apply the cert through msgcert, so I will try the next steps and see how it goesmsgcert was added to 6.3 for entirely this reason -- a replacement was required for the functionality lost due to the dropping of the admin console.
Regards,
Shane.

Unable to send email through sky

Hi, unable to send emails through sky as it says the password is incorrect on the settings page

Hello David.ball,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Log in to your email provider's website to ensure that the account is active and the password is correct.
Restart your iOS device.
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.
Have a nice day,
Mario

Cannot send mail through Hotmail on iPad

Cannot send mail through Hotmail on iPad, it's ok through bigpond though. I have tried deleting account and shutdowns x 2 but still nothing.
The message which appears is telling me the user name or password "SMTP: @[email protected]" is incorrect.
Thanks, Ron

Yahoo's been having persistently random issues for months. You can try just waiting it out, or delete and readd your yahoo account. When my accounts were affected I just used webmail to access my yahoo accounts until it cleared up.
Chances are it's all on their end and really all you can do is wait it out.

Onsite Scanner Unable To Send Documents Through Exchange 2007 Server (SBS 2008)

I have an SBS 2008 server complete with Exchange 2007 in house and have configured Exchange 2007 to use the Exchange Online Protection (EOP) to process mail for malware, etc. This setup has worked great for the last year or so with no issues.
However, all of a sudden in the last couple of weeks our onsite copier can no longer send documents through email to anyone within the organization. The copier is a Kyocera TaskAlfa 3050CI and exists with the same network. The copier can scan
to a network folder without issue.
If I change the SMTP settings to use a gmail account instead of a local account I can send mail to outside email address. Even with this changed though I still can't send to our domain addresses.
I tried running a message trace from the Exchange Management Console but it doesn't find anything for hte given subject or date/time when I scanned the document.
I am not exactly sure what I should be checking or what piece of the puzzle is causing the problem here. Any ideas on what might be happening or how to correct it?
Thanks so much!

Hi,
Any update? Would you please let us confirm some questions as Howtodo mentioned. Please feel free to let us
know.
Based on your description, it seems that only the copier can’t send documents via emails. On your SBS 2008
environment, please check if some user accounts encounter the similar issue. In other words, did users also can’t send emails attached with documents? If the email was attached with a small size document, will the same result?
In addition, can find any relevant error or events?
Hope this helps.
Best regards,
Justin Gu

Sending JavaMail Through A Particular Gateway Or Firewall

Sending Java Mail through a particular Gateway or Firewall. I am having the problem while sending mail through Java Mail. This is the code being used for sending mail.
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
          Properties props = new Properties();
          String timeOutVal="50000";
          props.setProperty("mail.transport.protocol","smtp");
          props.setProperty("mail.host","smtp.gmail.com");
          props.put("mail.smtp.auth","true");//we will use the smtp authentication
          props.put("mail.smtp.port","465");
          props.put("mail.smtp.socketFactory.port","465");
          props.put("mail.smtp.socketFactory.class","javax.net.ssl.SSLSocketFactory");
          props.put("mail.smtp.socketFactory.fallback","false");
          props.put("mail.smtp.quitwait","false");
          props.put("mail.smtp.connectiontimeout",timeOutVal);
          props.put("mail.smtp.timeout",timeOutVal);
          final String emailId ="[email protected]";
          final String password ="test123";
          if(emailId != null && password != null){
               Session session = Session.getDefaultInstance(props,new javax.mail.Authenticator(){
                    protected PasswordAuthentication getPasswordAuthentication(){
                         return new PasswordAuthentication(emailId.trim(),password.trim());
                    MimeMessage message = new MimeMessage(session);
                    message.setSender(new InternetAddress(emailId.trim()));
                    if(subject != null){
                         message.setSubject(subject.trim());
                    }else{
                         message.setSubject("");
                    //message.setContent("text","text/plain");
                    message.setContent(msg,"text/plain");
                    String recipients = emailIds.trim();
                    message.setRecipients(Message.RecipientType.TO,InternetAddress.parse(recipients));
                    Transport.send(message);
                    return 0;
          }else{
               return 1;
          }After the Applications sends the mail the following error displays in the console log.
     14:39:59,090 INFO [STDOUT] javax.mail.MessagingException: Could not connect to SMTP host: smtp.gmail.com, port: 465;
       nested exception is:
        java.net.SocketTimeoutException: connect timed out
     14:39:59,090 INFO [STDOUT]     at com.sun.mail.smtp.SMTPTransport.openServer(SMTPTransport.java:911)
     14:39:59,090 INFO [STDOUT]     at com.sun.mail.smtp.SMTPTransport.protocolConnect(SMTPTransport.java:158)
     14:39:59,090 INFO [STDOUT]     at javax.mail.Service.connect(Service.java:310)
     14:39:59,090 INFO [STDOUT]     at javax.mail.Service.connect(Service.java:169)
     14:39:59,090 INFO [STDOUT]     at javax.mail.Service.connect(Service.java:118)
     14:39:59,090 INFO [STDOUT]     at com.sun.mail.smtp.SMTPTransport.connect(SMTPTransport.java:95)
     14:39:59,090 INFO [STDOUT]     at javax.mail.Transport.send0(Transport.java:188)
     14:39:59,090 INFO [STDOUT]     at javax.mail.Transport.send(Transport.java:118)          Troubleshooting Done
     Added Firewall ip in the Gateway List, and removed other gateway.
     Then it works.But it blocks other remote servers from accessing the local server.
     as the other gateway is being removed from the local server.
     Please help me to solve the issue.
Thanks and Regards
Rasa.

Your configuration code is unnecessarily complex. Please read the JavaMail FAQ for the simpler way
to configure access to Gmail.
Also, the JavaMail FAQ has tips for debugging connection problems.
If you're having trouble configuring your gateway, talk to your network administrator.

Is it possible to send keys from LabVIEW.?

Is it possible to send keys from LabVIEW.?
(In VisualBasic this is possible through the sendkeys command.)

Hey I think i can help you
Inport picture with edit >inport picture from file.
Paste it into you frontpanel ctrl+v
Place you Graph control and pant it with transparent.
You must pant both the scale and the draw area with transparent.
Try also to use the Reorder funktion in the toolbar to get the picture in
background.
Esben
Click here for Free Video!!
http://www.gohip.com/freevideo/
wrote in message news:8b82k8$bjq$[email protected]..
> Hi!
> Does anyone know to insert a picture in the background of a graph and to
> plot over it ?
> I tried with the Edit Control command to import a picture (*.emf, *.bmp,
> *.xmf) from the clipboard to a graph indicator but the only thing I got
> was
a blank window.
>
> The other possibility would be to export the data to an excel worksheet
> and to plot an excel chart with the background already set-up but I'd
> rather use only one application.
> Can anyone help ?
> Thanks.
>
> Fabrice
>
>
> Sent via Deja.com http://www.deja.com/
> Before you buy.

Sending Mail through Outlook using PL/SQL

I have installed Oracle 9i (9.2.0.1) on Windows Xp with SP 2 platform. My MS Outlook has been configured.
How could i send mail through Microsoft outlook by using PL/SQL Program.

How could i send mail through Microsoft outlook by using PL/SQL Program.Nonsensical question. MS Outlook is a mail client. A PL/SQL program is also a mail client.
Both these need to talk to a mail server. It does not make sense for one mail client to "+talk+" to another client for passing it e-mails that need to be send.
The mail client talks to a mail server using the SMTP ( Simple Mail Transfer Protocol ). There are also other protocols such as IMAP (open standard) and MAPI (Microsoft proprietary).
Oracle's PL/SQL environment by default supports SMTP via the UTL_SMTP, and UTL_MAIL packages - these provide the PL/SQL developer with an interface to use to send e-mails.
MS Outlook (client) does not feature anywhere in this regard, whereas MS Exchange as a mail server will (assuming it is being used on your network).

Sending Keys through VM Console incorrect Ascii mapping (openSUSE)?

Similar Messages

Maybe you are looking for