Sending messages in order to a DB

Hi everyone
I´m sending messages from an R/3 system to a Database without a BPM.
Do someone know how can I simulate the Exactly Once in Order in a JDBC Receiever Communication Channel
Cause I need the messages to arrive in nthe order that they gor out of the R/3 system.
Thanks in advance
Emmanuel

Hi
My scenario is R/3 Proxy --> PI 7.1 JDBC (DB2)
The average volume is 400 000 registers, I need to ensure that the registers be inserted in the order that they were sent.
There are 2 ways to send the messages:
1.- Send all registers in 1 event from R/3
2.- Send the registers in smaller packages
But in both options I have to ensure the insertion sequence.
Do you know wich should be the best practice to this scenario.
Thanks in advanced
Emmanuel

Similar Messages

Sending message while order get Pending Status

Hi,
We r using status profile for releasing order. If order fails the condition, it remains in the Pending Status. So we need to send these order to Sales Rep for review. How to send email to Sales Rep?

Hello
Create 'Z' Report and [send that report by mail|http://www.sap-img.com/fu016.htm]
Thanks & Regards
JP

I am trying to use My Messages on my Verizon Ellipsis and I get the message that says mobile number (tablet) doesn't have permission to send messages. How can I change this?

How do I give permission to my Verizon Ellipsis tablet to send messages - in order to use My Messages?

Hello AdamsFamily04,
Staying connected with all you devices is important. I am here to help you connect your Verizon messages with the tablet. Verizon Messages on the tablet needs to be associated with your mobile number to configure the messages. When the message prompts you for a number, use the mobile number you want to link it with and you will be ready for use.
YareliM_VZW
Follow us on Twitter at @VZWSupport

Want to send the Sales Order No in Alert message

Hi,
my scenario is IDoc to File. suppose due to sme validations my message got failed in any where. immediatley I'm sending an Alert to End User . But as per the prsent devolopment End user is not understaning that which Sale order got failed. End user is not capable to open the Hyperlinks of the message monitoring . So, user is asking to send the Sales order no inside the Alert message (Mail) .
is it possible to send the message content also inside the Alert Message (Mail)
Regards
Jain

is it possible to send the message content also inside the Alert Message (Mail)
Since the salesorder number comes from the payload....you need to introduce a BPM here....there is no other option than this to get a value from payload into alert message..
There is a blog by Michal explaining the same....please check...if i get it will update the same:)
this is the blog i am talking about....check if it helps you..
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Regards,
Abhishek.
Edited by: abhishek salvi on May 7, 2009 8:09 PM

I've lost the "Send" button in my reply window. When I double click on a Mail message, on order to reply, the "Send" button at the top of the window is missing. I can reply by closing and saving my reply, and re-openning from Drafts. How to fix?

I've lost the "Send" button in my reply window. When I double click on a Mail message, on order to reply, the "Send" button at the top of the window is missing. I can reply by closing and saving my reply, and re-openning from Drafts. How to fix?

Hi, try this...
If nothing is showing in the Toolbar at top, click the little gray oval at top right.
Right click or Control+click on the Toolbar, choose Customize Toolbar, drag the Send button to the Toolbar.

Issue: "No Authorization to send Idocs with message type Orders" - IDX5

Hi All,
I am working on a File to IDoc(Orders.Orders05) scenario. The sender is PI Server and the receiver is the SAP ISR system. A technical system has been created in PI SLD for the ISR system and a Business system is added to that. The logical system created in ISR system using Tcode BD54 is added to the business system in PI. A new RFC destination is created in PI system to connect to the ISR system.
On the ISR system Partner profile is created using TCode we20 with the same logical system name already created using Tcode BD54.
When sxi_monitor is executed on the PI system, It shows checked flag on the Inbound side and Red flag on the Outbound side. And when idx5 is executed, it shows the new Idoc number and when it is double clicked, it shows the Status Text as
"No Authorization to send IDocs with message type Orders".
All authorizations have been provided on the Sender side.
Please let me know if any authorization need to be provided on the ISR system or Is this an error on any settings.
Thanks in Advance.
Stalin S.

Hi,
Check this Thread which deals with the Authorization Issue
RFC Adapter
And also check this how to check whether u have sufficient authorization to send the Idocs or not
To test the Authorization check
Double click the RFC Destination that u have created in XI towards R/3 in SM59
Select UtilitiesTestAuthorization test
By this you can come to know whether your user is having the propper authorization or not
REgards
Seshagiri

How to Customize Sending of Message Type ORDERS/ORDRSP?

Hi Experts,
After saving a ORDER in SAP I will that IDOC ORDERS01 will be send by Message Type ORDERS and a ORDER Confirmation by Message Type ORDRSP.
How can i Customize that?
Can somebody help me?
Thanks,
Frederic

Hello Frederic,
Create output type for both these and maintain the condition record to determine the partners and configure the partner profile for the partner with two outbound message types.
Regards
Farzan

I'm unable to use Fiverr with Firefox. Last year I was able to order Fiverr gigs and send messages inside Fiverr but for the last 3 weeks I've been unable to.

I'm unable to use Fiverr.com with Firefox. Last year I was able to order Fiverr gigs and send messages but for the last 3 weeks I've been unable to do either. I can login to Fiverr but I'm unable to use the service.
I'm using Windows 7.

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!

TS2755 I have to keep restarting my phone in order to send messages. I didn't have to do this before the latest update:(

I have to keep restarting my phone to be able to send messages ever since new update

Hi - try this thread
https://discussions.apple.com/message/23280703#23280703

Bug report: Mail sends messages with empty bodies

Over the last year, I have experienced a particularly irritating bug in Mail.app at least a dozen times. I finally have a good idea as to what causes it.
The problem involves long email messages (often with attachments) that end up being sent with blank bodies (and no attachments). Even the copy in the "Sent" folder ends up blank, and several minutes or hours of work vanishes into thin air, not to be seen ever again.
I finally realized that this bug only occurs when sending mail through our work SMTP server while outside the work firewall, and only as a result of a certain sequence of events. Here is what happens:
When we connect to our work SMTP server from outside the local network and without going through the VPN, the SMTP server requires password authentication. If the current SMTP selection in Mail.app is the one that does not require authentication, the SMTP server rejects the message. At that point, Mail.app opens the email I am trying to send and brings up a modal dialog that says "Cannot send message using the server xxx.xxx -- The server response was: xxx@xxx relaying prohibited. You should authenticate first." The dialog also presents a drop-down list of SMTP server choices. I choose the password-authenticated version of the server and then click on "Use Selected Server" to send the message.
This works almost all the time, but on occasion it ends up sending a blank message! If I have a long email, particularly with attachments such as PDFs that are rendered in the body of the message, it takes a few seconds for the mail message to be rendered underneath the modal dialog box. Since I am used to this STMP rejection behavior, sometimes I am too fast to choose another STMP server from the list and click on "Use Selected Server" before the mail message is rendered on screen! The result, invariably, is a blank email message that gets sent.
I guess what is happening is that when the STMP server rejects the message and hands it back to Mail.app, the message gets copied into a buffer in order to be displayed on screen. Selecting another server and resending it immediately (before the message is copied into the buffer completely) causes the message body to get trashed.
I hope that this description is adequate for Apple QA folks to replicate and isolate the problem (and hopefully fix it). One solution (although not the most elegant one) would be to disable the "Use Selected Server" action until the message is copied into the buffer and rendered on screen.

This could be related to another bug reported here recently:
E-mail looses all images if mail server doesn't accept outgoing email...
You cannot count on Apple looking into this or even noticing it if you report it here, so I suggest you the same I suggested in the other thread, i.e. report it in one of the following places:
http://www.apple.com/macosx/feedback/
http://developer.apple.com/bugreporter/

I can't send messages or call people with my NEW iPhone 4s.

Hello.
I live in Sweden and I ordered my iPhone 4s some days ago, I got it on Wednesday.
Ever since I got it I noticed that I was having problems with my carrier, "Tele2". I can't send messages or even make calls, and I'm very disappointed. And I also can't connect to the 3G network at times, it just goes away, and this always leads to a reboot.
I have to restart my phone every 5 minutes, and THEN I can send about 1-2 messages, then it goes back to what it was before. Crap.
And I also called the people on "Tele2" they said that they don't know if it's the software or if it's the hardware. And that I simply have to wait until they know.
I'm just wondering. Is there anyone out there who's heard anything about solving any problems like these? Perhaps and update to 5.0.1 ? Please let me know, I would appreciate it very much!

They said that it wasn't them, they contacted Apple and they were aware of the problem. But still Apple didn't know if it was hardware of software problems.

Receiver categ. PSG is not allowed by settlement prof. SD_ROS for this sender-message no KD031.

Hi Friends,
I am facing error message "Receiver categ. PSG is not allowed by settlement prof. SD_ROS for this sender Message no. KD031" at the time of creating sales order once entered material code.
I have also searched the same through SCN and found lots of helpful responses, but my question is how this Settlement Profile is getting determined at the time of creating sales order?
Thanks,
Pratik

Hi
Go to OKO6 or OKO7... Change your settlement profile PP01
However, I recommend not to change PP01.. Make a copy of PP01 and assign it your Prod order... Allow Order item in the settlement Profile
br, Ajay M

PI error when sending message

Hi Friends,
I am working on scenario where i need to send sales order confirmation to partner and receive purchase order from partner.
And this transfer of message will be secured by using certificate.
I am able to send message successfuly using certificate and partner is reciving it properly.
Now when partner is sending me message they are getting error as Authorization required: Unauthorized.
I am using PI7.1, please let me know how i can solve this problem.
Regards,
Brij...

not solved yet, i wll try to put question in better way,

Output Control - Message for Orders

Hi all,
i have in my system a message ZDWO ( Distribution ALE-Partner function CO-Sending immediatly-Condition ORDER TYPE) for sales orders. It works for all kind of orders except for one that hasn't automatic sending (but this type is in the list of conditions).
What can be the reason for this? depending on the partner? or on the type of sales order? or else?
Any ideas?
Thanks in advance.

Hi,
You need to maintain condition records (transaction NACR) for application V1 (Sales). Once you added the missing order type condition, the system will propose the output control in VA02 for the corresponding sales order(s).
Regards,
Ferry Lianto

Nokia 206 - Send message to nokia - charged £1

Got new Nokia 206, inserted sim powered up got a message saying need to send message to Nokia and may be charged (no idea what is in the message), checked PAYG balance and I have been charged £1 for the privelige = not happy.
Is this a subsidy to nokia? in order to use the phone we need you to send a premium rate SMS?
Can anyone elaborate what this message was (not saved in sent messages) and why Nokia are sending to premium rate number?

Well its just an activation message which helps Nokia in activating the warranty of your phone and other services such as Nokia Life.
But that's optional, it also tells you that premium sms rates will apply. So its your mistake if you didn't read it properly and continued.
Make sure you don't do that the next time. Skip it if it asks your permission to send an sms. Anyways, it won't bother you anymore

Sending messages in order to a DB

Similar Messages

Maybe you are looking for