Sending MIDI from prg I�ve written to Virtual Instr. on my computer

Anyone who can give me the few lines it takes to send the three bytes 144, 60 and 127 (chan1, midC, full volume) from my homemade prg to a Virtual Studio Technique Instr. on my computer? It seems that there is a lot more free code about how to receive and play MIDI than how to send MIDI to a commercial VSTI on ones computer.

THOUGHTLESSLY CROSS POSTED
http://forum.java.sun.com/thread.jspa?threadID=725090&tstart=0

Similar Messages

When running a "stand-alone" APP..how do I send midi from Logic?

Hi all,
When running a "stand-alone" APP..how do I send midi from Logic?.....Please no IAC stuff it doesn't work.......thanx
SvK

using IAC here no problems. works very well.
you can host your au's in another app such as soundflower or au lab, but you are still going to need to get it to hear midi. you can use physical midi ports with something like a MTP midi interface, and getting the midi by routing the out of one port to the in of another (midi loop) but you have to be careful logic doesn't listen to the same midi signal or everything will jam up (midi feedback).

Sending MIDI from Logic to Motion

Motion (Apple's animation software) allows MIDI instructions to change animation parameters. I was wondering if anyone here has been successful in sending MIDI instructions from Logic to Motion and can take me through the steps to do so. (I have a related question over in the Motion forum.)
Thanks in advance.

Take a look at "midipipe" and "midi patchbay" too.(free downloadables)
They're probably just front-ends for the IAC bus, but sometimes GUI is good.
Be wary when enabling virtual midi patches cause logic sums all inputs which can create a feedback loop. It seems to not hang my computer indefinately when it happens nowadays, just freeze it for a few seconds then give me a few seconds to fix it before freezing again for a while.
If your getting into realtime midi to graphics also check out "quartz composer" in the osx developer tools too.
..or "pure data" with GEM if your real brave.

Unable to send midi from Mainstage out to Rewire applications

I can't seem to find out how to send midi out from Mainstage to other applications, such as Reason.
I created an external instrument channel strip, but in the midi out -box out the channel strip I can only see the physical midi output from my audio interface. The Rewire application should be visible here as an option, shouldn't it - or is there another way to send midi out from Mainstage to be able to play for example Reason instruments with Mainstage? Any ideas what might be wrong? I have Reason open and it seems to be working as a Rewire slave as it should, but somehow it isn't visible as a midi port in Mainstage.
- Malmberg
Message was edited by: Malmberg

Hey Malmberg, I was able to get this to work by doing the following steps:
Opened Mainstage and my Mainstage concert file first
Then opened Reason (I only have the demo)
Selected a patch I wanted to use in Mainstage to Reason
Clicked + to create a new Ext channel strip
In the MIDI Out box, I used the dropdown list and choose Reason (see image)
It could be that the sequence you used so open MS first, then Reason

Send midi from software sequencer to midi out

I am quite new to logic and sometimes am confused about the midi routing...
I have a sequencer (Reaktor) in a software instrument track, from wich I want to send midi to my hardware synthesiser. (sometimes maby recording the midi coming out from reaktor to a midi track)
I have the output channel in Reaktor set to the same as the receive channel of my synthesiser. (everything works fine in Reaktor standalone)
But I was not able to do it from logic ...
I tried option-clic on the triangle in the track in the environnement, to draw a beautiful cable to the corresponding midi channel of my instrument track...
And a few other things...
My synthesiser still recieve nothing.
If anyone can show me the road, i will be very grateful.
Thanks

Here is thread from the Reaktor Forum:
http://www.native-instruments.com:80/forum/showthread.php?t=63504&highlight=Midi +Output
some Ensembles don't transmit Midi to the Outside world - this one does:
http://www.native-instruments.com/index.php?id=userlibrary&type=0&ulbr=1&plview= detail&patchid=6669

How Do I Send Photos From My IPAD to Someone Else With I PAD or Computer ?

How Do I send Photos from my IPad to another IPAD or internet ?

You can select up to 5 photos in the Photos app and send them as attachments in an email. There are also apps like Simple Transfer that allow you to transfer photos to your computer or another iOS device that is on your wifi network. There are also apps that allow you to upload photos to Facebook, Flickr etc, and I believe that the iCab browser allows uploading to some sites.

How can i send email from my ipad and have it go to my home computer

When recently travelling I tried to send emails home but often they came back into my ipad inbox but never went to the home computer. How can I get them to load at home?

If your iPad settings for email do not remove the mail from the server your computer will retrieve the mail when you send it to yourself.
On your iPad
Settings --> Account --> Advanced --> Delete Mail from Server --> Never
I always have my Mail set this way on my iPad. This way I let my computer retrieve and archive email and delete items from the server.

Send mail from Portal application using java

Hi everybody,
I'm looking for a way to send mails from my portal application written in java.
Now I've read a lot of topics on this but can't seem to get it straight.
I added a few jars to my project among which is
coll.appl.gw.srvcmail_api.jar
Here you have the ISendMailItem.class and ISendMailService.class files.
Now I know these are interfaces so I created 2 new classes:
Mail implementing ISendMailItem
SendMail implementing ISendMailService
And all of the forced methods are created for me but now I don't know how to use these classes to be able to send a mail.
Can someone help me with this please?
Thank you
Regards
Wouter

Hey Göran,
Thank you for this example.
for the transport i've put this
transport.connect( "smtpgateway.arinso.com", "", "" );
Is this correct? or do I need to fill in more info?
I've adde the mail.jar to my buildpath and put your code in a eventhandler.
When I now generate the corresponding event i get an Exception:
java.lang.ClassCastException: javax.mail.Session
Do you know why I get this?
Thank you
Wouter
Message was edited by:
Wouter Delellio

Is it possible to send message from R/3 system to itself?

HI All.
I want to send message from R/3 to PI (anyhow, virtual receiver or smb else), make in PI some transformation and return this new message to R/3. (I don't want to do this transform in R/3, because in PI its easier and universally)
Is it possible? How?
Regards,
Andrey

Thanks for answers.
R3 <-> PI <-> R3 scenario is not a trouble. But not in this case.
The main task:
User have a table with data. In this table there are 2 fields: INDEX, SUM. He want to take a xml file. I have XSD for this file.
I have to assign summ value (SUM) to corresponding tag depend on characteristic name (INDEX).
It looks like DMEE, but in DME formats has own structure and it is differ from my XSD. It is difficult to translate my xsd to DME xml.
It is realizable in ABAP, but i want to minimize abap development.
So I want to send this table to PI, transform it to file (xsd external definition) and then return this file as string (for example) and save it as file on the users front end. It is very simply to tranform the table to file, but i don't no how to send it back to R3. I think it is necessary to transfom file to message with another structure and then send to R3. Any ideas?
Regards,
Andrey

Sending MIDI-stream to from my prg to virtual instrument on my computer

Anyone out there who can give me the lines it takes to send the three bytes
144, 60 and 127 (chan1, note ON, full volume) from my prg to one of the Virtual Studio Technique Instruments on my computer?
there are plenty of code samples of how to receive and play MIDI, but not much said abuot transmitting MIDI to a commercial VSTI.

Ditto.
You need to look for your itunes library under Computers and select it, then music.
Music column is for web based content not local content, just to confuse everyone.
AC

Send MIDI Sequence to GarageBand

Hello,
Is it possible to write a Java program that OSX will see as a virtual MIDI device (just like it might see a real MIDI USB keyboard) so that I can programmatically generate and send MIDI sequences through GarageBand?
I am experienced with Java and C and I have written device drivers. But I am not sure where to begin because I have zero experience with the javax.sound.midi package.
I envision the following: When I run the program from a terminal it initializes a virtual device and then pauses. At this point if GarageBand is running I should see the familiar "The number of midi inputs has changed" message. Then each time I hit <Enter> and it plays my coded MIDI sequence. I can select a different instrument in GarageBand and hit <Enter> again and it will play the sequence again using the new instrument. Pressing 'x' or a special character will cause the device to deinitialize again triggering the aforementioned GarageBand message and the Java program will exit.
Is this possible?
Any direction would be greatly appreciated.
Mike

Hi,
I have a similar question, so I'm curious if you ever found an answer to yours. I was wondering if I could get a Java sound Synthesizer for a native synthesizer AudioUnit (specifically Ivory Pianos). It doesn't look like it.
Rob

I cannot change send emails from iOS5

Hi all,
I have an old "mac.com" userID Apple and I made a new "me.com" email address that I use on iCloud.
Everything works fine, except on my iPhone 4. I cannot send email from my me.com address from the phone.
I found out that in "Preferences>iCloud>Account" my email is the mac.com userID and not the me.com email address.
I think the phone tries to send emails using "mac.com" account, therefore the SMTP doesn't match.
I checked on the iCloud Account Informations on my preference pane of my iPhone and the "mac.com" email address in written in light grey, which means that I am not able to change it.
Any suggestions?
Thank you
G.S.

Hello,
Who is your eMail provider, the part after the @ sign?
In Mail's Window Menu, choose Connection Doctor, any red dots for status, if so what is the message?
Then click the Show Details button & Check again.

Can't send email from Yosemite

I have an iMac 21.5 inch, mid 2010, 3.06GHz Intel core i3, 4GB memory, and have just installed Yosemite 10.10. I am able to receive emails, but cannot send emails out of Mail. When I run the Mail Connection Doctor, I have a green light for the IMAP accounts, but red lights for the SMTP accounts. The SMTP accounts have the following error:
Could not connect to this SMTP server. Check your network connection and that you entered the correct information in the account preference.
I am able to access my email via Safari, and am able to send emails that way. And with the previous Mac OS 10.6, I had no problems sending emails from Mail.
I have read the article OS X Mail: Troubleshooting sending and receiving email messages - Apple Support, but the information does not discuss Yosemite, and I am unable to find where to check out items like Network Utility.
How can I set up Mail in Yosemite to work sending emails? Any help would be greatly appreciated!
Thanks

You should be able to launch Network Utility by entering the first few letters of its name in a Spotlight search.

Mail can't send email from 123-reg accounts

Hi all,
I've got an issue with Mac Mail can’t send email from 123-reg accounts.
I know there is a lot of articles on simular matters and some I have tried out with no luck, others are just speaking a whole other language.
Any help would be greatly recived, here's my situation below:
Running a iMac 2.8GHz Intel Core i5 on OS X 10.8.3
I’m using 3 accounts on Macs Mail client, one is my iCloud account that is working fine and the other two are my 123-reg accounts that I use for business purposes. I’ve been working like this for a couple of years now and about 6 months ago I upgrade my operating system from Snow Leopard to Mountain Lion.
2 or 3 months ago I randomly got a problem where I was unable to send any emails from my 123-reg account, I could only receive emails. I checked my settings and they were all correct and unchanged so I attempted to delete them and recreate the account but with no such luck.
I then decided to check if it was a problem at 123-regs end and attempted to log into web mail. This worked and was able to both send and receive emails so eliminated that possibility.
I also have these accounts set up on my iPhone, so checked if there was any issues and everything was working fine. I then checked my iphone details and made sure the same was on my desktop and still no such luck.
I’ve tried out some of the articles I’ve found on here (the ones written in plain English) still no results. I’m not very IT illiterate and just wondered if anyone else has got any ideas, whether there is something specific with 123-reg accounts and Mac Mail?
Many thanks.

Thanks
I just had another hunt around looking at posts and discovered that it was because I recently changed to BT Infinity and they had a block on.
I didn't even think to question the ISP.
https://discussions.apple.com/message/21173608#21173608

Why can I no longer send email from my Hotmail SMTP account using Mail?

I can no longer send email from my Hotmail SMTP account using Mail. The connection doctor says it can't connect to the SMTP server. All the settings look to be correct and it was working fine before. I can still email using my iPhone with the same account.

Other may post it is some type of change with your ISP but the simple fact is this happen with Apple Mac Mail all the time.
IMHO Mac Mail is one of, if not the, worst mail program ever written.
Do yourself a big favor and start using some other mail program, any other Mail program.

Sending MIDI from prg I�ve written to Virtual Instr. on my computer

Similar Messages

Maybe you are looking for