Changing encoding to "CP1252" in B2B Adapter

Hi Experts,
Issue is regarding the change in encoding to "CP1252".
1) We are having special characters in our payload which were not read by UTF-8 so it was failing in mapping. After we changed the same to CP1252 using below XSL code it worked fine and passed through the system.
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" encoding="cp1252"/>
<xsl:template match="/">
<xsl:copy-of select="*"/>
</xsl:template>
</xsl:stylesheet>
It worked fine after using XSL map.
2) In Configuration, we have an option of character set(ISO-8815-15 or UTF-8) but its not working when we are using, For what this option is being used? I am not sure what gets changed if we are using this in AS2 Channel?
3) XML Anonymizer bean is not working with AS2 adapter, its showing UTF-8 in the mapping. I think B2B doesn't support this bean.
Please suggest an alternative to XSLT and Java mapping, as client requirement is that they want to have only graphical mapping and no other mapping is to be used.
Thanks!
Regards,
Nidhi

Hi Ruchir,
Thanks for your reply.
Setting encoding parameter is not working. Also, XSLT which i was using it worked 2 days back and now it is not working and failing with the same error.
Error
After analysing the audit log for the successful messages(two days back) i realised that the messages were in error with the same error as above, but after retrying the third time it was delivering successfully. But, today its failing after the third retry as well.
I have a strong belief that encoding is not an issue, as I can see from the error that message subversion is having an issue and when I am changing it to EAN008 instead of SFTI01 it is working fine without any issue.
Please suggest what needs to be done.
Thanks,
Nidhi

Similar Messages

Change encoding of input message sent by J2EE Adapter

Hi all,
I get a input message with a wrong encoding (Sender SMTP Adapter). Within XML prolog, there's a declaration of UTF-8. Having a look at the message, it's ISO-8859-1 encoded. That mean's I've to do one of the following options:
a) change encoding declaration in XML prolog to the correct one: ISO-8859-1
b) reencode the entire message from ISO-8859-1 into UTF-8, so that the message encoding matches the XML prolog
I've found two possible solutions, but I don't know if they're working:
1. usage of XMLAnomyzerModule: reading the documentation, it seems to be that I cannot use that module in a sender adapter, right? If I'm wrong: what does the module do? Does it just exchange the encoding declaration in the prolog or does it reencode the message?
2. running that small XSLT mapping before my own mapping: would it change the encoding declaration from UTF-8 to ISO-8859-1 in the XML prolog?
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml" encoding="ISO-8859-1"/>
<xsl:template match="/">
<xsl:copy-of select="*" />
</xsl:template>
</xsl:stylesheet>
BR
Holger

Hi Stefan,
thanks for your reply. Unfortunately it's not my application who's sending the wrong message and it's not possible to change it on sender side. I don't know why but it's like that
So it's exactly like you've mentioned: when using special characters where ISO-8859-1 codepage differs from UTF-8, we've a problem.
When I understand you correct there's a adapter module TextCodepageConversionBean which changes the encoding, right? Then I could use it to encode the inbound ISO-8859-1 message to UTF-8 (which is declaration in XML prolog).
Where can I find more information how to use it? Searching SDN I've just found one other thread where the same module is mentioned, but without further hints.
BR
Holger

Urgent : Change Encoding type?

Hi.
It's urgent
I wana change encoding type character with capital character.
For reference, receiver file adapter write header like following... but must be changed large character...
(not iso, must be changed "ISO")
<?xml version="1.0" encoding="iso-8859-1" ?>
==> <?xml version="1.0" encoding="ISO-8859-1" ?>
Regards.
Message was edited by: ChangSeop Song

hi,
I suppose you already have a mapping?
so you only want to change the result
to have encoding="ISO-8859-1 right?
you can use XSLT mapping to map
your target xml document to xml document with ISO
this is what you have to use:
<xsl:output method="xml" encoding="ISO-8859-1"/>
have a look at my weblog in order to see how you can add sxlt mapping to your adapter (in the modules tab)
/people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
obviously you can also use java or abap mapping
but XSLT will be the fastest to develop
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

How to put edfact file using b2b adapter

All,
I have to print a edifact file and place it in a certain location using b2b and soa. could you please let me know how this could be done. in the b2b console i could see only listening channels. could this be done directly through b2b adapter or should i use soa adapter.. if either how..
pls guide..
regards
Rakesh

hi Anuj,
i went through the docs
1. the doc with the sample is hard to understand. i opened the composite, but i guess the b2b config changes also needs to be done. they are not clearly mentioned in the doc.
2. cant find details to create outbound adapter in edifact faormat...
you aware of any other links or samples. Also I am new to B2B...
regards
Rakesh

Right way to change encoding settings

Hi!
When I encode footages I have to differet ways to change encoding settings - one is AME's settings panel. Second is Codec options. I'm confused - where must I change settings, must they be the same in both windows, or what's "primary" options window? Please, explain!

Ok... But in that case, what settings are "primary", have a priority? Those who are in codec options window or in regular AME settings window?

B2B adapter is not polling any data from EDI X12 810 ECS file

Hi All,
I am new to Oracle B2B. I am using
Jdev 11.1.1.6
Oracle Editor : 7.0.5.4016
Document Protocol : EDI_X12
Document type : 810 (Invoice )
Version: 4010
Weblogic server :11.1.1.6.0
Requirement is : i had an EDI file and i need to translate the EDI map using the B2B adapter, transport to SOA Suite and insert into a custom DB.
Issue is : B2B adapter is not polling any data from EDI X12 810 ECS file
for this i created sample EDI X12 810 ecs file, i converted the same to .xsd and .dat file. I created partner, and while configuring channel i used '*Generic File 1.0*' protocol and i given folder path( i also checked, by just giving folder Name) in the folder name property of 'Transport Protocol Parameters' , i also placed sample xml file into this folder. And I created sample process in Jdev to poll data from this folder.
build and deployment is fine for this process, but no instances is created for this process. and the Process is not Polling any data from the folder which i mentioned in the Transport Protocol Parameters.
is this the way am doing is wrong for my current requirement or am i did any wrong step (as stated above ) ? Please help me. How can i receive data from this EDI file to my bpel process so that i can continue with the rest of the Process. Thank you in advance
Edited by: 979032 on Feb 12, 2013 11:02 PM
Edited by: 979032 on Feb 13, 2013 12:14 AM

Hi Anuj ,
I placed .dat file now. The file Picked by B2B adapter. But i was getting the Error. The error i found in Business Message as
"Error Code     B2B-50547
Error Description     Machine Info: (soabpm-vm) Description: Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND.
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Agreement not found for trading partners: FromTP null, ToTP MyCompany with document type 810-3070-INBOUND. "
But i created agreement for the partner and my document type name is "NewDocumentType" and in the wire message a am getting as shown below
Id     7F00000113CFC36785C0000017D7E2B0
Message Id     7F00000113CFC36785C0000017D7E2B0
Business Message     7F00000113CFC367A450000017D7E2B7
Packed Message     Packed Message
Payload     Payload
Protocol Message Id     EDIX12810.dat@7F00000113CFC36799B0000017D7E2B4
Refer To Protocol Message Id
Protocol Collaboration Id
Protocol Transport Binding     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
Message Digest     Message Digest
Digest Algorithm
Transport Protocol     File
Transport Protocol Version     1.0
Url     file://localhost//home/oracle/Desktop/B2BFiles/
security
Transport Headers     filename=EDIX12810.dat filesize=2289 ChannelName=MyCompany_ListeningChannel file_ext=dat fullpath=/home/oracle/Desktop/B2BFiles/EDIX12810.dat timestamp=2013-02-21T01:58:21.000-08:00 MSG_RECEIVED_TIME=Thu Feb 21 02:04:53 PST 2013
certificates     certificates
State     ERROR
Reattempt Count
Error Code
Error Description
Error Text
exchangeRetryInterval
exchangeRemainingRetry
Message Size     2289
I also has one more doubt, now i created ecs,xsd and .dat by selecting sample EDI file in Document editor. suppose i want create the same ecs ,.xsd and .dat for my gentran file which is of EDI x12 810 standard but i have it in PDF format , then how can i access that to in Document editor ( in the import option, i found Gentran DDF and Gentran Unix IG and i was getting the following error while importing my PDF file
ErrorCode : 0xC00CE508
File Position : 10
Line Number : 2
LineByte Position :2
Reason: An invalid character was found in text content error) so that i can create .dat file and i can place the same in my folder in order to pick the file.
Please help us . Thank you .
Regards,
Kotresh
Edited by: 979032 on Feb 21, 2013 2:17 AM

Error while configuring B2B adapter in Jdev 11.1.1.6

Hi All,
While configuring B2B adapter in jdev 11.1.1.6, i'm getting the following error at the Document definition step,
Unable to connect to URL: https://ip address:port no/integration/services/b2b/B2BMetadataWSPort due to javax.xml.soap.SOAPException: Message send failed: sun.security.validator.ValidatorException: Violated path length constraints
please let me know if anyone of you faced this issue and has a resolution. We have SSL configured and using Rosettanet protocol.
Thanks,
Terry

Terry,
It seems like a SSL issue related to the certificate. Can you make sure that certificate being presented by the server (hosting URL https://ip address:port no/integration/services/b2b/B2BMetadataWSPort) is valid and you have complete cert chain in the keystore of SOA server?
Regards,
Anuj

HOW SPECIFY FILE.ENCODING=ANSI FORMAT IN J2SE ADAPTER.

Hi All,
we are using j2se plain adapter, we need the outputdata in ANSI FORMAT.
Default file.encoding=UTF-8
how to achive this.
thanks in advance.
Regards,
Mohamed Asif KP

File adapter would behave in a similar fashion on J2ee. Providing u the link to ongoing discussion
is ANSI ENCODING possible using file/j2see adapter
Regards,
Prateek

Change status(Active/Inactive) of file adapter by the external command

Hi, all.
Is it possible to change status(Active/Inactive) of file adapter by the external command?
Let's say, like
"$ switch_file_adapter_status.sh <File Adapter name> <active|inactive>"
or something like that.
Actually, we have the following requirement for the file adapter.
For example, we have many "file adapter to R/3" scenarios and we only want to allow data transfer between 9:00 a.m. to 9:00 p.m.(R/3 service time).
In order to achieve this requirement, one option would be to switch file adapter status between active and inactive by external command line.
And this command will be controlled by the job scheduler(like Tivoli).
Does XI(3.0 or above) have this kind of feature?
Best Regards.

Hi,
I don't think that this is possible.
But one Solution for your problem could be a job on xi who execute the Queue.
So that Adapter work the hole time and send the Message to XI Queue which process them not automatically.
And the XI Queue you can trigger with a Job like normal R/3 Jobs.
Hope that helps,
Regards,
Robin

Error -: AIP-50031: B2B adapter general error: java.lang.NullPointerExce

I have configured two B2B trading partner over ebMS communication. I have also configured an internal delivery channel using JMS.I am posting a msg(the Tp identification is through duns no.) on the JMS queue and I am not able to receive it on the Tp side and i am getting the following error
008.11.28 at 01:53:36:544: Thread-13: B2B - (ERROR) java.lang.NullPointerException
     at oracle.tip.adapter.b2b.msgproc.DbAccess.insertMsgTblRow(DbAccess.java:806)
     at oracle.tip.adapter.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:5365)
     at oracle.tip.adapter.b2b.engine.Engine.handleOutboundException(Engine.java:4109)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1130)
     at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
     at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
     at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
2008.11.28 at 01:53:36:544: Thread-13: B2B - (ERROR) Error -: AIP-50031: B2B adapter general error: java.lang.NullPointerException
     at oracle.tip.adapter.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:5426)
     at oracle.tip.adapter.b2b.engine.Engine.handleOutboundException(Engine.java:4109)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1130)
     at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
     at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
     at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
Caused by: java.lang.NullPointerException
     at oracle.tip.adapter.b2b.msgproc.DbAccess.insertMsgTblRow(DbAccess.java:806)
     at oracle.tip.adapter.b2b.msgproc.DbAccess.updateWireBusinessToErrorState(DbAccess.java:5365)
I am able to recevie the Heased but not the payload
     ... 5 more

Hi,
":" - has been used as default separator so if you identifier holds this value, please enable add the tip.properties entry as below and things should be fine.
oracle.tip.adapter.b2b.partyTypeAndValueSeparator=#.
Here's a sample for jms enqueue,
FROM_PARTY= urn:oasis:names:tc:ebXML-cppa:partyid-type:duns#232510151
TO_PARTY= urn:oasis:names:tc:ebXML-cppa:partyid-type:duns#123456789
Just replace the "FROM_PARTY" and "TO_PARTY" as "from" and "to" for AQ.
Thanks,
Sinkar
[From Ramesh Team]

Error in Inbound B2B: AIP-50031: B2B adapter general error: java.lang.Null

Hi,
I am getting the following error in inbound B2B - Custom Document over Generic Exchange - SFTP
Description: B2B adapter general error
StackTrace:
Error -: AIP-50031: B2B adapter general error
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1900)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2657)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2527)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2482)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:530)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:376)
     at java.lang.Thread.run(Thread.java:534)
]]>
The outbound B2B is working fine; however for the inbound file transfer the file is picked up from the trading partner and this exception occurs.
Thanks

Please paste more log in trace 32 mode. What is the name of the file you are receiving? By default B2B expects incoming filename as -
<FromTPName>UniqueId.<anyFile_Extn>
For e.g., if partner MarketInc is sending the file then it's name should be - MarketInc_12345.dat or MarketInc_34567.xml
Make sure that listening channel is not marked as internal as well.
Regards,
Anuj

Where to download B2B Adapter?

where to download B2B Adapter that allow BPEL to integrate with Oracle B2B Integration??

thanks, i manage to get the B2B adapter but i face another problem when i try to deploy.
here is the error i got from the log.
ORABPEL-05207
Error deploying BPEL archive.
An error occurred while attempting to deploy the BPEL archive file "bpel_Enqueue850_1.1.jar"; the exception reported is: Problem 1: [http://localhost:9700/BPELConsole/wsil/adapters/B2B/EDI_X12/X12_4010-4010/850/850+Definition?wsdl]: Unable to locate the JCA Resource Adapter via WSDL port element jca:address.
The Adapter Framework is unable to startup the Resource Adapter specified in the WSDL jca:address element: {http://xmlns.oracle.com/pcbpel/wsdl/jca/}address: location='eis/b2b'
The reason for this is most likely that either
1) the Resource Adapters RAR file has not been deployed successfully to the OC4J Application server or
2) the 'location' attribute in $J2EE_HOME/application-deployments/default/deployed-adapter-name/oc4j-ra.xml has not been set to eis/b2b. In the last case you might have to add a new 'connector-factory' entry (connection) to oc4j-ra.xml.
Please correct this and then restart the BPEL/OC4J Application Server
any idea how to fix this problem?

Hot to Change encoding of email attachments?

I can't read the attachment as it is supposed to be in arabic but there is no way to change encoding in safari or mail,,,, can anyone help?

You will probably need to use a real computer to do what you want, unless you can tell the sender to resend it to you in a different format, like pdf.

Changing Quality of Service in Receiver Adapter

Hi,
We have a scenario where hundreds of messages for the same interface is sent to XI and written to one file on the receiver side. We do not want to change the QOS (Quality of Service) to EOIO (Exactly Once in Order) on the sender side nor do we want to use BPM due to performance issues.
Is there any way to change the QOS to EOIO after the mapping is complete?
I tried changing the QOS (DeliverySemantics) using a adapter module on the receiver adapter. In the audit log, I can see that the QOS has been changed to EOIO and assigned to the correct ConversationId, but the messages does not follow the EOIO process.
Any help is great appreciated.
Thanks.
Best Regards,
Duke

Here is more detail on the scenario.
Hundreds of messages come into XI from R/3. One message is split into multiple messages by using the Extended Interface Determination. These messages are written to a file (each message has its own file). The file adapter is set to append.
The issue we are facing is that when hundreds of messages are processed simultaneously, it triggers an error when attempting to write to the file (locking issues). It then has to wait and retry, which adds to total processing time. Due to the time sensitivity of these interfaces and the errors that are raised, we would like to change the QOS to EOIO on the receiver side (when it writes to the file) so that it does not have to wait and retry.
The Maintain Order at Runtime is checked in the Interface Determination. Once it gets to the adapter framework to write to the file, it has a QOS of Exactly Once, which is carried over from the sender.
We do not want to change the QOS on the sender side, but only on the receiver side.
Any thoughts?
Thanks.
Best Regards,
Duke
Edited by: Duke on May 29, 2008 5:11 PM

How can I change encoding?

Hello...
I am korean.. so My English ability very poor. sorry...
I want to change encoding...
When I maked xml file by transformer
default sentence maked......like that.....
<?xml version="1.0" encoding="UTF-8"?>
but I want to change encoding='euc-kr';
<?xml version='1.0' encoding='euc-kr'?>
so. I did like that...
File f = new File("d:/xml.xml");
FileWriter saveFile = new FileWriter(f);
SaveFile.write("<?xml version='1.0' encoding='euc-kr'?> \n");
StreamResult sr = new StreamResult(saveFile);
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
t.transform(doms, sr);
but When I did....
two sentence maked....
<?xml version='1.0' encoding='euc-kr'?>
<?xml version="1.0" encoding="UTF-8"?>
like this....
how can I solve my problem....
thank you

hi there! please never ever try to do this manual insertion prior to transforming...
use this:
t.setOutputProperty(OutputKeys.ENCODING, "euc-kr");

Changing encoding to "CP1252" in B2B Adapter

Similar Messages

Maybe you are looking for