Sending multicast messages via only one NIC

I have 5 different NICs on my computer. I want to send a message to some other computers that are connected to me via a specific NIC.
How can I make sure that this message will only be sent via this NIC?
Thanks in advance!

Bind the multicast socket to that NIC.

Similar Messages

HT201401 my phone will not send a message to only one person. Help!

my iphone will not send a message to only one person. How can I fix this?

Have you tried going to your contact list - said contact - send message?

Nokia X3-02 can't send text message to only one of...

i can't send text message to only one of my contacts... what happen? what should i do? help me pls... tnx...

Hi,
You can send the other contacts SMS but not only one contact, Right?
Then the issue is with your contact, maybe the number is not right or not the right format.
So check your contact number with number which you can send SMS.
Maybe it is best to delete that contact and create new contact which the format is the same with the others.
I hoe this helps.
Br
Mahayv

Sending a message to only one peer after NetGroup receive

Hi Folks,
I'm learning stratus and NetGroup to develop a P2P application that shares xml file between thousands of users.
After a search by string over peers the user will receive xml files containing the searched string.
So, see How I think it will work:
1- An initial peer do a search by string over a NetGroup
2 - A second peer receive that broadcasted message from initial peer
3 - The second peer will verify if it has one or more xml files containing that message (search string)
4 - If the second peer find one ore more xml files, a NetStream will be created to send the xml files to the peer who made the search
5 - The initial peer will receive the xml files from all the peers who have xml files containing the search string.
As you can see there are broadcast and Unicast communication (correct me if i'm wrong).
So, using Stratus and NetGroup is necessary to create a NetStream to send a unicast message as I did above ?
Thanks and sorry my english =D

NetStream is the most direct/efficient way to send data directly from one peer to another, without involving any intermediaries. your approach seems sound.

PO - New Output Type to send an email to only One email Address

Hello Gurus
We have new requirement to configure Output Type to send PO's to only one mail address.
We want to send all Purchase Orders of particular Doc Type - 0001 and for one POrg - ABCD to dedicated mail id ( lets say ( xyz @ gmail com ) ).
So that we can keep all these PO copies in PDF format at this mail id only (Note: id is not vendor mail id).
So I would request you all to kindly guide me the steps to proceed for this - How I can configure this new Output type so that every time when we create PO for this criteria it will not get printed to printer but it will sent in PDF format to only one mail id.
Subject of these mail sent to ( xyz @ gmail com ) should always contain " PO - Number of PO - Vendor Number/name ".
Thanks
Animesh Agrawal

This can be done with the standard form itself.
first find out the output type u r using.
Then goto T-code NACE and then choose EF- purchase order and then select the output type u r using.
Then goto the 'processing Routines' at the lefe side of the screen.
There u can find out the output forms for this output typr u r using. Here add 'Simple mail-7' in the list and then give the program name and the smartform or the script u r using.
We can also give the mail texts for this output form.
After that goto ME22N and then choose the 'Messages' tab and then click the simple mail and in the 'communication method' kindly provide the mail id for which the PO mail has to be sent.
And then the mail can be viewed in the inbox of the recipient.
in this way we can sent the PO mail to the corresponding mail address,.
I guess this will solve ur issue.
Thanks and Regards
Siva
Edited by: Sivaprakash R on Apr 20, 2009 1:00 PM
Edited by: Sivaprakash R on Apr 20, 2009 1:00 PM

I need to send a message via socket from a C program to a Java program

Hi,
I need to send a message via socket from a C program to a Java program. The message has three data: a long, an integer and a string.
How can I put those three fields in a array of bytes in C? How can I extract those same three fields from an array of bytes in java?
Thanks a lot!

A few options:
JNI
Corba
Using sockets directly
take your pick.

Why does my iphone send all text from only one of my contacts to my email?

Why does my iphone send all text from only one of my contacts to my email? I'm curious to know if anyone else has had this issue with the Iphone 5s...

imessage has a new setting that shows all emails associated with your apple id. There are two sections, send and receive. Since you are using the same apple id, Im sure if you adjust one of those settings to your mobile number instead of your appleid, it wont send double.
You might also have to adjust your wifes settings too, so those emails dont overlap

HT1386 Error message says only one library per device. My previous computer crashed and now I want to sync with new computer. How do I overcome the error message?

Error message says only one library per device. My previous computer crashed and now I want to sync with new computer. How do I overcome the error message?

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

I recently updated the software on my ipad2 to 5.0.1 and when I send a message via "chat" it shows on all the iPhones associated with my account (my sisters, my husbands, etc) is there a way to stop that?

I recently updated the software on my ipad2 to 5.0.1 and when I send a message via "chat" it shows on all the iPhones associated with my account (my sisters, my husbands, etc) is there a way to stop that?

If you have been using your phone as recommended, you should have minimal data loss from the inability to restore from a backup.
Contacts and calendars should be synched to a computer application like Outlook or Address Book (or a cloud service like Google Contacts or iCloud). The update process does NOT affect these computer applications so your contacts and calendars should be safe and sound in the application ready for synching back to your phone.
Same for photos. It is recommended that photos be imported to your computer as soon as possible after taking them (just as you would import them from any other camera) for storage, archival and safekeeping. Again, your photos should be safe and sound on your computer.
If you've not been using your computer as recommended, you've learned a very hard lesson, I'm afraid.

TS2755 Does anyone know why: when using Messages on my iPad, a cannot send a message with only text on it? Strange though, I can send a message with text AND a photo??

Does anyone know why, when using Messages on my iPad, a cannot send a message with only text on it? Strange though, I can send a message with text AND a photo??

Hi Cass,
If you are having issues with Messages on your iPad, you may find the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden

Sending Text messages via my PC

Hello, I was looking for a way to send text messages on my Blackberry Perl but through my PC. I send a lot of text messages each day and it makes it easier to type them out on my pc. I know Nokia and Sony Erriccson have this feature but I cannot seem to find it for my Perl. Any help will be greatly appreciated.Thanks

It depends what carrier you are using... With ATT You can send one right from the ATT website. If you using ATT Do the following:1. log into your account2. click phone/device
3. click send a text message in the left column, or in the bottom right box.
(the links in step 2 & 3 will only work if you are already logged in via step 1)Message Edited by payroll on 04-16-2008 11:03 AM

How to send a message to just one person when it keeps sending to previous group?

I want to be able to send a text message to just one person at a time.
My iPhone 4s keeps sending messages to all the people that have been grouped with the intended recipient, no matter if I put ONLY that recipients name in the box.
I have:
     - cleared out the list of previous messages (even tho I hated to do so).
    - turned off group messaging.
     - shut down my phone, waited 30 min and restarted it.
None of that worked,
Please help!

Have you tried going to your contact list - said contact - send message?

Sending large messages via ABAP client proxy

Dear All,
my scenario is the following. I have an ABAP report which creates files. These files are currently moved by an FTP auto job, to a target folder and are finally imported into an 3rd party programm.
The CSV-files created consist of approx. 3000 records, each with a length of 1000. So the total size is about 3 MB. The files are send at night, once a day.
We want to distribute these files via SAP PI. My question is the following:
Is a client proxy able to send the whole (3MB) message to PI (which will just write the message to the target FTP destination) or do I have to send each record with the client proxy to PI (and append the record to the file).
If both solutions are feasible,what would be preferable? The solution of sending single records to PI, would be more generic in my opinion, because I could define a message type for the records in PI. So in future i could add also some mapping stuff. If I would want to send the whole file content with one client proxy call, i would basically have one big string.
How do both options compare in regard to performance? Sending 3000 small messages oder one big message?
What about the file adapter? Is it an option to append 3000 records to a file?
Does anyone have another solution for that scenario?
Best regards and thank you for your help!
Florian

Hi,
Is a client proxy able to send the whole (3MB) message to PI
yes it is capable.
If both solutions are feasible,what would be preferable?
yes both solutions are feasible ,but preferable is to send the whole message rather than one by one.
How do both options compare in regard to performance?
sending whole message is far more better than sending record by record.
regards,
pradeep A.

How can I simply send audio messages via text, not just to people who have iphones, even basic Nokia phones allow this function? Am I missing something here? IPHONE 6

How do I on IPHONE 6 have audio message option not just have the option it seems for other people with Iphones. Even Nokia phones have this very BASIC function/? Also how can you BULK DELETE Emails, I get hundreds of junk ones per day, and simply want to go, Select ALL or SELECT ALL READ and then press DELETE ONCE not hundreds of times????

No, basic Nokia phones do not, and have never had a function to easily send audio messages universally. SMS is a carrier feature and uses a very basic transfer mechanism and works only for short, 160-character messages. Through software, some phones later allowed you to type longer messages that the device then broke up seamlessly and sent as multiple SMS messages. MMS is another carrier service developed to be able to transport multimedia like audio and pictures. Again, very basic transfer and usually slow and low quality. Both of these are again, operator services. Your iPhone can send those messages to non-iPhone users using standard carrier services.
On the other hand, your iPhone Messages app uses your iPhone data plan - not unlike your home Internet service - to transfer audio, video and images through Apple's iMessage service. Other services exist that do something similar - WhatsApp for example - which also requires both the sender and recipient to use their app for the service to work.
As for email, Meg is correct. Your email provider is the first line of defense against spam. You should adjust your filters. That said, iOS Mail app had a delete all function, but not in places where it can do more harm than good - i.e. the Inbox. It is present only in the Junk and Trash folders where, presumably, your email provider or you have already been through some decision making process and deemed those emails acceptable to be deleted en masse.

My iPhone won't let me send picture messages except to one person

Recently I noticed that I can only send picture messages to one person. My iMessage setting is turned on, I have shut my phone off and then back on and it will still only let me send pictures to one person. Can anyone help?

Contact your wireless provider. Text messaging is theirs to support.

Sending multicast messages via only one NIC

Similar Messages

Maybe you are looking for