Sending Order Number via IDOC upon creation of Sales Order

Hi Experts,
I have a requirement where i receive an order from an external system to SAP as an IDOC.
Upon arrival, i have to create the Order in SAP and send the Order Number back to the external system in the form of IDOC.
How can i accomplish this? Kindly share your expertise on this with me.
Thanks in advance.
Regards,
Keerthi

Hi Gary,
Now when the Order is posted in SAP, i need a method which will automatically trigger the Outbound IDOC from SAP rather than me doing so manually.
Is there a way i can track the creation of the Order in SAP and somehow configure SAP to trigger the Outbound IDOC with the Order number automatically?
Thanks in advance,
Keerthi

Similar Messages

IDoc and creation of sales order!!

Hi,
I need to create sales order using IDoc and the file will have multiple line items for sales order and it has to be dynamic, so whats the best way to do this?
Regards
Gunjan

Hi
Check for the related IDOC types in EDBAS table and for related Message Types
in table EDMSG. take relavent one for your requirement and use.
Data Creation in Idoc
IDocs are text encoded documents with a rigid structure that are used to exchange data between R/3 and a foreign system. Instead of calling a program in the destination system directly, the data is first packed into an IDoc and then sent to the receiving system, where it is analyzed and properly processed. Therefore an IDoc data exchange is always an
asynchronous process. The significant difference between simple RFC-calls and IDoc data exchange is the fact, that every action performed on IDocs are protocolled by R/3 and IDocs can be reprocessed if an error occurred in one of the message steps.
While IDocs have to be understood as a data exchange protocol, EDI and ALE are typical use cases for IDocs. R/3 uses IDocs for both EDI and ALE to deliver data to the receiving system. ALE is basically the scheduling mechanism that defines when and between which partners and what kind of data will be exchanged on a regular or event triggered basis. Such a set-up is called an ALE-scenario.
IDoc is a intermediate document to exchange data between two SAP Systems.
*IDocs are structured ASCII files (or a virtual equivalent).
*Electronic Interchange Document
*They are the file format used by SAP R/3 to exchange data with foreign systems.
*Data Is transmitted in ASCII format, i.e. human readable form
*IDocs exchange messages
*IDocs are used like classical interface files
IDOC types are templates for specific message types depending on what is the business document, you want to exchange.
WE30 - you can create a IDOC type.
An IDOC with data, will have to be triggered by the application that is trying to send out the data.
FOr testing you can use WE19.
How to create idoc?
*WE30 - you can create a IDOC type
For more information in details on the same along with the examples can be viewed on:
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a Segment
Go to transaction code WE31
Enter the name for your segment type and click on the Create icon
Type the short text
Enter the variable names and data elements
Save it and go back
Go to Edit -> Set Release
Follow steps to create more number of segments
Create IDOC Type
Go to transaction code WE30
Enter the Object Name, select Basic type and click Create icon
Select the create new option and enter a description for your basic IDOC type and press enter
Select the IDOC Name and click Create icon
The system prompts us to enter a segment type and its attributes
Choose the appropriate values and press Enter
The system transfers the name of the segment type to the IDOC editor.
Follow these steps to add more number of segments to Parent or as Parent-child relation
Save it and go back
Go to Edit -> Set release
Create Message Type
Go to transaction code WE81
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter
Click New Entries to create new Message Type
Fill details
Save it and go back
Assign Message Type to IDoc Type
Go to transaction code WE82
Change the details from Display mode to Change mode
After selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.
Click New Entries to create new Message Type.
Fill details
Save it and go back
Check these out..
Re: How to create IDOC
Check below link. It will give the step by step procedure for IDOC creation.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.docs
go trough these links.
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
http://http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
An IDoc is simply a data container that is used to exchange information between any two processes that can understand the syntax and semantics of the data...
1.IDOCs are stored in the database. In the SAP system, IDOCs are stored in database tables.
2.IDOCs are independent of the sending and receiving systems.
3.IDOCs are independent of the direction of data exchange.
The two available process for IDOCs are
Outbound Process
Inbound Process
AND There are basically two types of IDOCs.
Basic IDOCs
Basic IDOC type defines the structure and format of the business document that is to be exchanged between two systems.
Extended IDOCs
Extending the functionality by adding more segments to existing Basic IDOCs.
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30)
Create Message Type ( WE81)
Assign Idoc Type to Message Type ( WE82)
imp links
http://www.allsaplinks.com/idoc_sample.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
www.sappoint.com
--here u can find the ppts and basic seetings for ALE
http://sappoint.com/presentation.html
www.sapgenie.com
http://www.sapgenie.com/ale/index.htm
Reward points if useful
Regards
Anji

How to generate IDOC while creation of Sales Orders

Hi
If i create a sales order means.. i want to trigger a IDOC with this ORDER data .. how can we do this.. when ever i'm creating a sales order it should be automatically trigger a IDOC , Because ehen ever sales ordre was created in R/3 system it should be transferred to some destination.. all the ALE configurations are done.. .
so, how can we trigger an IDOC based on Orders creation..
Thanks
Babu

Hi,
Here is the link
[Re: Idoc creation;
Regards
Sudheer

Materials flag for deletion upon creation of sale order

hi experts
When I use a material that is flag for deletion the system issues the following messge : "Material xxxx is marked for deletion"
message no V1406 - application area: V1, message number 406
This message is displayed only as "Information" only however I need to change to "Error" where the user will not be able to proceed.
Any suggestion as how I can change this message to "Error"
thanks

Hello cyrus,
You need to setup material status message and assign it to material master instead of changing the message (I think it is defined as warning message in program itself , experts pl. confirm)
The following thread will helps you.
http://www.sapfans.com/forums/viewtopic.php?p=515309&sid=d48b8c16cd95dbf811cfb970512c6cf6
Regards
Arif Mansuri

Creation of sales order from idoc; items referencing to different contracts

Hi All,
My requirement is to create sales order from an idoc.
IF a sale order contains multiple items , then the order should be created with contract referenced
-at the So item level, the valid contract found for each material is different
hence am not able to use the following bapis
BAPI_SALESORDER_CREATEFROMDAT2 is not triggering the copy controls.
BAPI_SALESDOCUMENT_COPY i can give only one reference document
Please help
Thanks
Deepa

Hi Deepa,
Following link can help you for creating sales order with reference
http://msdn.microsoft.com/en-us/library/cc185190.aspx
http://www.sap-img.com/fu036.htm
Award points if useful
Thanks,
Ravee..

Credit Memo request with reference to Billing Document number via IDoc

Hi,
I want to create credit memo request with reference to billing document number via IDocs.
I have tried through ORDERS05, but when I process I saw that it is only processing with reference to contract number or quotation.
So is any other way of creating credit memo request creation with reference to Billing document number via IDocs?
Thank you in advance.
Regards,
Santhi

Please Help... it is Urgent... Thank you

Upon saving, assign sales order to different number range...

Hello Experts,
We have a new requirement wherein upon saving the sales order, I have to check its company code and
sales document type and if it has a record in a customized table, then I have to use another number range instead
of its default number range...
For example, the default number range for sales orders for company code 1000 with a document type of ZAOR
has a default number range of 3011000000 to 3011999999. I need to change it to 3021000000 to 3021999999.
Hope you can help me guys. Thank you and take care!

A new numner range can be created via SNRO.
Also, you can use the following exit to assign this new numbe rrange to the order -> USEREXIT_NUMBER_RANGE
For more info; refer Re: User Exit No for assign a different internal document number to VA01
Neeraj

Creation of Sales Order and Service Contract from Inbound IDOC

Hi Experts,
My requirement is to create a Sales Order as well as a Service Contract from one Inbound IDOC. I am getting the Inbound IDOC from a third Party. The message type is ORDERS and Basic Type is ORDERS02. How ever i am using an extension type IDOC which carries all the required data for Sales Order and Service Contract. My requirement is like, to create a Sales Order first.
I have created a Z FM which is attached to the Process Code and subsequently to the message type. Inside the FM i an calling FM 'IDOC_INPUT_ORDERS' for creation of Sales Order. After that i am changing the IDOC data for the Document Type. I am changing the document type which is responsible for Contract Creation.
Then I am again calling the FM 'IDOC_INPUT_ORDERS' for creation of Contract with the help of IDOC data. But here the Contract is not getting created. It's getting failed during the Batch input session.
I need to solve this problem as soon as possible. Please help me. If there are any other options also please share.
Thanks in Advance.
Regards,
Priyabrata

Actually there is problem with BDCDATA. Inside the FM it's calling transaction with help of BDCDATA. If i am creating a Sales order or contract alone its creating successfully. But when i am trying to create both, it's retuning sy-subrc '1001' after calling the transaction on the second attempt. Is there any problem with BDCDATA like we can't handle with less time gap? Please help and give your inputs.
Regards,
Priyabrata

What is the IDOC Basic Type for sales order creation

Hi Experts,
Can anyone tell me Idoc Basic type for sales order creation.
Thanks
Prashant

Hi,
The basic types for creating the order are:
1.Orders01
2.Orders02
3.Orders03
4.Orders04
5.Orders05.
The basic type for SIS order is:
SISCSO01.
Regards,
Krishna.

Issue with creation of sales order in CRM system

Hi Experts,
Here are the details of the process we followed
1.     We found a Function Module u201CBAPI_BUSPROCESSND_CREATEMULTIu201D which is used to create a sales order in CRM.
2.     We have set a Break point in the FM u201CCRM_ORDER_MAINTAINu201D and tried to create a sales order using the transaction u201CCRMD_ORDERu201D. For this the parameters we have given are
a.     sold-to-party
b.     ship-to-party
c.     quantity
d.     product
And after this we have saved the order and the order is saved and in the debug mode we have the parameters in u201CCRM_ORDER_MAINTAINu201D and we found all these     parameters in the FM.
3.     After this we have given all the parameters mentioned above in the FM u201CBAPI_BUSPROCESSND_CREATEMULTIu201D and still the order is not created, gave an error message saying that CRM_ORDER: Incorrect values in the interface object.
4.     We checked the CRM_ORDER badiu2019s interface and it is having only header guid to be given. We gave this header guid also in the FM u201CBAPI_BUSPROCESSND_CREATEMULTIu201D and then it gave a different error saying that : Document cannot be saved.
5.     Finally we are not able to know the parameters to be passed to the FM to create an order.
Any inputs will be highly appreciated.
Thanks a lot in advance.
Lakshman.

Hi Easwar,
Now i am able to create a sales order by passing the parameters to "BAPI_BUSPROCESSND_CREATEMULTI" and the parameters i am passing are Process_type in the ORDERADM_H, parner_fct (partner function), partner_no , Quantity and prod_ordered (product name) but after creation of sales order using my report program and if i see the sales order uisng transaction crmd_order (using transaction ID) or crmd_orderadm_h(using headerguid) or crm_order_index, only the PROCESS_TYPE is updated but the remaining parameters which i passed like QUANTITY,PRODUCT NAME,PARTNER NUMBER are not present in the sales order. I am providing the code which i have written for creation of the sales order. Can you please look into it and tell me where i might have went wrong??
*& Report ZCREATEORDER_TEST
REPORT ZCREATEORDER_TEST.
DATA : LV_HEADER_GUID TYPE GUID_32,
WA_HEADER            TYPE         BAPIBUS20001_HEADER_INS,
ITAB_HEADER          TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS,
ITAB_CREATED_PROCESS TYPE STANDARD TABLE OF BAPIBUS20001_HEADER_INS,
ITAB_OBJECTS_TO_SAVE TYPE STANDARD TABLE OF BAPIBUS20001_GUID_DIS,
ITAB_PARTNER        TYPE STANDARD TABLE OF BAPIBUS20001_PARTNER_INS,
lt_product_i TYPE STANDARD TABLE OF BAPIBUS20001_ITEM,
wa_product_i type BAPIBUS20001_ITEM,
lt_schedlin_i type standard table of BAPIBUS20001_SCHEDLIN,
wa_schedlin_i type BAPIBUS20001_SCHEDLIN,
ITAB_INPUT_FIELDS TYPE TABLE OF bapibus20001_input_fields,
ls_inputfields TYPE bapibus20001_input_fields,
WA_PARTNER          TYPE BAPIBUS20001_PARTNER_INS,
ITAB_RETURN          TYPE STANDARD TABLE OF BAPIRET2,
WA_OBJECTS_TO_SAVE LIKE LINE OF ITAB_OBJECTS_TO_SAVE,
           "To store the Objects to be saved.
WA_CREATED_PROCESS LIKE LINE OF ITAB_CREATED_PROCESS,
ITAB_SAVED_OBJECTS   TYPE STANDARD TABLE OF BAPIBUS20001_OBJECT_ID,
WA_SAVED_OBJECTS    LIKE LINE OF ITAB_SAVED_OBJECTS,
GC_X type c.
gc_x = 'x'.
CALL FUNCTION 'GUID_CREATE'
IMPORTING
    ev_guid_32 = lv_header_guid.
CLEAR : WA_HEADER.
Passing the respective values from the Header table to internal table.
WA_HEADER-GUID          = LV_HEADER_GUID.
WA_HEADER-PROCESS_TYPE = 'ZTA'.
APPEND WA_HEADER TO ITAB_HEADER.
*Appending the values to the ITAB_HEADER.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'ORDERADM_H'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'PROCESS_TYPE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
*ls_inputfields-ref_handle = '0000000000'.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-objectname = 'ORDERADM_H'.
ls_inputfields-fieldname = 'MODE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'ORDERADM_H'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'GUID'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CHANGES MADE
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'LOGICAL_KEY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'MODE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN_I'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'GUID'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
   ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN_I'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'QUANTITY'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
   ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'SCHEDLIN_I'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'MODE'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CHANGES MADE
WA_PARTNER-REF_GUID = LV_HEADER_GUID.
WA_PARTNER-REF_KIND = 'A'.
giving the partner function and partner no 000000038 for slod to party
WA_PARTNER-PARTNER_FCT = '00000038'.
WA_PARTNER-PARTNER_NO = '10017'.
APPEND WA_PARTNER TO ITAB_PARTNER.
*"ADDING VALUES for the product
wa_product_i-header        = lv_header_guid.
wa_product_i-handle        = '0000000001'.
wa_product_i-ordered_prod = '12000014'.
wa_product_i-mode          = 'A'.
APPEND wa_product_i TO lt_product_i.
*"ADDING VALUES for quantity
wa_schedlin_i-quantity   = 30.
wa_schedlin_i-handle = 1.
APPEND wa_schedlin_i TO lt_schedlin_i.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
*ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'REF_GUID'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'PARTNER_FCT'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
ls_inputfields-ref_guid = LV_HEADER_GUID.
ls_inputfields-REF_KIND = 'A'.
ls_inputfields-objectname = 'PARTNER'.
ls_inputfields-logical_key = ' '.
ls_inputfields-fieldname = 'PARTNER_NO'.
APPEND ls_inputfields TO ITAB_INPUT_FIELDS.
CALL FUNCTION 'BAPI_BUSPROCESSND_CREATEMULTI'
TABLES
    HEADER          = ITAB_HEADER
    ITEM            = lt_product_i
    RETURN          = ITAB_RETURN
    PARTNER         = ITAB_PARTNER
    INPUT_FIELDS    = ITAB_INPUT_FIELDS
    CREATED_PROCESS = itab_created_process
    SCHEDULELINE    = lt_schedlin_i.
READ TABLE ITAB_CREATED_PROCESS INTO WA_CREATED_PROCESS WITH KEY GUID = LV_HEADER_GUID BINARY SEARCH.
WA_OBJECTS_TO_SAVE-GUID = WA_CREATED_PROCESS-GUID.
Appending the Guid of the contract to be saved to the internal table
APPEND WA_OBJECTS_TO_SAVE TO ITAB_OBJECTS_TO_SAVE.
CALL FUNCTION 'BAPI_BUSPROCESSND_SAVE'
EXPORTING
    update_task_local = space
    save_frame_log    = GC_X
TABLES
    objects_to_save   = itab_objects_to_save
    saved_objects     = itab_saved_objects
    return            = itab_return.
Calling the Standard BAPI to Commit the transcation.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
I have debugged the above code, all the values are passing are passing to the FM "'BAPI_BUSPROCESSND_CREATEMULTI'" and these passed to the CRM_ORDER_MAINTAIN and then to CRM_ORDER_READ which are called inside the "'BAPI_BUSPROCESSND_CREATEMULTI'". Finally the sales order is created but not able to see all the values that i am passing except PROCESS_TYPE.
Thanks a lot in Advance,
Lakshman.

Need to add a custom defined partner at the time of creation of sales order

Hi Experts,
I request you some solution for me in this urgent requirement.
Scenario 1:
I have to create a partner in the sales order based on some validations with repect to bill-to party and ship-to party. The validations if success, will return me the data from an 'Z' function module which i need to populate to the new partner that will be created in the sales order.
I am using the program MV45AFZZ and the userexit USEREXIT_SAVE_DOCUMENT_PREPARE.
Now after getting the data for the new partner to be added, i have done this code..
      LOOP AT ws_dealer.
        xvbpa-kunnr = ws_dealer-kunwe.
        xvbpa-parvw = 'ZD'.
        xvbadr-telx1 = ws_dealer-primaryid.
        xvbadr-name1 = ws_dealer-physname.
        xvbadr-stras = ws_dealer-physstreet.
        xvbadr-ort01 = ws_dealer-physcity..
        xvbadr-regio = ws_dealer-physstate.
        xvbadr-pstlz = ws_dealer-postalcode.
        xvbadr-land1 = ws_dealer-ctrycode.
        xvbadr-telf1 = ws_dealer-phone.
        xvbadr-telf2 = ws_dealer-fax.
       xvbadr- = ws_dealer-email.
        xvbadr-telbx = ws_dealer-distance.
        APPEND xvbadr.
        APPEND xvbpa.
      ENDLOOP.
Now i'm getting the new partner number in the partners tab in sales order, but the new address details are not getting updated and the ship-to party address is only appearing in the screen.
Also i'm finding difficulty in updating the telex, email information in the sales order.
Scenario 2:
There are cases where some sales orders are getting created through an idoc. In that case, i have to populate the values from idoc especially the address details of all the partners to the screen and update the sales order.
Apart from populating value to all the partners, the process of scenario 1 will have to be carried again to create the 'Z' partner (if validation is successful).
For this case, i do not know which userexit i need to use. and how to go about this..
This is having a very tight deadline and it is extremely urgent for me.
Please help with your valauble answers.
Your help would certainly be appreciated and rewarded.
Thanks,
Ananth

Hi Mahulenka,
Thanks for your reply. I do not want the data from the customer master.
The partner data will come in the idoc and i wish to put the data in the sales order based on some validation for the standard partners like WE/AG/RE/RG.
The client has developed some 'Z' function module which contains the functionality of SAP FM - IDOC_INPUT_ORDERS.
Now for the partner which i'm creating 'ZD' i believe i should update the indicator UPDKZ to 'I' for XVBADR table as it is a new record. Why should i update in XVBAP table and i'm adding only partner and his address details. Also i think all this change i should put in USEREXIT_SAVE_DOCUMENT at the point of saving.
Please advise.
Thanks,
Ananth

Inbound IDoc used for updating Sales order status

I have a requirements to set use standard IDoc to send out the Sales order to a non-SAP software as well as receiving Inbound IDoc to update the status of sales order in SAP. Could someone comment on my questions below:
1. What are the difference between all the ORDERSxx Idoc types?
2. What IDoc should be used for Inbound IDoc to update the sales order stataus in SAP?
3. Can the same IDoc type be used for both Inbound and Outbound with only the difference in the segment of Direction?
Thank you. Points will be awarded appropriately for helpful comments.

Hi,
1.Intially standard IDOC types "ORDERS01" is having limited
      segments. After few months the requirement got increased to
      add more fields to "ORDERS01".So,once you release the IDOC
      type you can not add any more fields .So SAP come up
      with "ORDERS02" with new fields.Like that all IDocs types have
      some more new seg ments.
2.You can use ORDER05
3. Yes you can use same IDOC type

Creation of sales order through Purchase order

Hi all
We have a special scenario in creation of Sales order with the help of purchase order,
Could you please advice me how we can create sales order with the help of purchase order.
Thank YOu
Swaroop

you can create the sales order from the purchase order.It can be achieved by Idocs.
Please maintain the condition record for the output medium EDI and also maintain the Partner profile in WE20.

Need of User-Exit in the creation of Sales Order(VA01)

Hi,
In the creation of Sales Order, I need to Compare the Ordered Quantity and Confirmed Quantity. If the CQ is less than OQ I need to create one more line item with the same material for the rest of the quantity and send the request to Production order for the remaining quantity. For this I am unable to get the exact exit. Please help me in this regard ASAP.
Thank you.

the following program are the user exit for billing.
we often use RV60AFZC and RV60AFZZ.
RV60AFZA
RV60AFZB
RV60AFZC
RV60AFZD
RV60AFZZ
RV60BFZA
For Sales order
Pricing, item addtion deletion
MV45AFZZ
First, I did not find documentation for the BADI either. But at the first glance the process of implementing it looks quite straightforward. I assume you run R/3 Enterprise (4.7). So, you should implement BADI 'BADI_SD_SALES' - this must be done in transaction SE19. In particular for the purpose of adding some additional items into sales document I would implement method SAVE_DOCUMENT_PREPARE. This method has changing table parameter FXVBAP of type VA_VBAPVB_T - it holds all the sales document items. Just add items of yours to it. Certainly, you have to fill all the appropriate fields carefully.
Hope this helps somehow.
In that case you should use USEREXIT_DOCUMENT_SAVE_PREPARE subroutine (form). As far as I remember it has no parameters. To add items to the sales document you should modify internal table XVBAP.
regards
vinod

Need to send a mail to group of users when sales order saved

Hi
user requirement is send a mail to group of users when sales order is saved

hi Sanjay,
Have a look on Michal's blog, it's for JMS, but it works for others: [PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean|PI/XI: Quick tip: Preserving attributes of XI messages via MultipartHeaderBean]
Mickael

Sending Order Number via IDOC upon creation of Sales Order

Similar Messages

Maybe you are looking for