Sending Quality notification shop paper though e mail

Hi All,
I am trying to send Shop paper form of Quality Notification through QM02>Print>print preview> Send email
But the last option send email is grayed out what would be the reason
Secondly  i tried doing services for object>send>send object with note in this case the mail is triggered but its not taking form as
an attachment its creating one note pad attachment with no details in this case how to attach shop paper to send object
Please help
Thanks
Diwakar

Hi,
Try using these steps:  press printer icon>select (highlight) your shop paper key> scroll to the right there should be a field "E-Mail address"  enter in the address> press the print/fax icon (not print preview) complaint will be saved and the email user should receive the notification as a pdf

Similar Messages

  • Shop paper printing issue in Quality notifications

    Hello All,
    I have a requirement where the user wants to print/fax quality notifications to a certain printer (printer 2) other than his regular printer defined in user defauls in SU01.
    In the IMG settings for quality notifications, I found the customizations for Print control. In the customization 'User-Dependent Print Control' (under 'Define Printer'), I created a new record with the user name, the shop paper corresponding to a quality notification and specified the printer name (printer 2).
    However, I notice that when I print this shop paper from within the quality notification, it prints it on the user default printer (defined in SU01) and not in the new printer (printer 2) defined in the above mentioned customization.
    Please let me know how I can configure the notifications to be printer on this new printer.
    Thanks,
    Rugmani

    Check the IMG in the following transaction OID1 & OID2  and OID3 for default printer
    Thanks
    S.N
    Edited by: SN on Jul 18, 2009 8:09 AM

  • Workflow Send Mail when Quality Notification is Complete

    Hi All,
    I need help related to QN Workflow, which is copy of standard workflow WS24500047.
    In this case , when all tasks are marked completed and get stated TSCO in QM02, against individual tasks.
    But, on completion of tasks, no mails is being sent to the coordinator, presently.
    A mail should be sent to the coordinator, in case all tasks are released and marked as completed.
    Please suggest how do I implement the above functionality.
    Thanks in advance.

    Hi all,
    Thanks for all your answers
    We have resolved the issue.
    Problem was with the configuration settings
    We had to do config settings in 3 places:
    1) SPRO/ Quality Management / Quality Notifications / Notification Processing / Activate Workflow template / Click on Activate event linking/  Place cursor on task group / click Object button / select tab workflow template and add the custom workflow / Go back and then open the workflow from the list and activate the events
    2) Add the events in transaction SWE2 for the custom business object.
    3) Add the events in the transaction BSVW for the custom busines object.
    Thanks and Regards,
    Mozila

  • Send Email from QUality Notification

    Can we send an email to internal/ external address from Quality Notification without any development? It should be SAP std (out of box) functionality.
    How?
    Reply highly appreciated.

    Yes there is a Standard functionality available in SAP use the tcode scot and confifure the SMTP.
    Prerequisites
    The mail server in question must be SMTP-compatible.
    Settings for the Profile Parameters (Transaction RZ10)
    You have to adjust the profile of the SAP Web Application Server if you want to use the SMTP function. The SAPconnect send job can only be scheduled for servers on which SMTP has been activated. For this reason, you must activate SMTP for all of the SAP systemu2019s application servers.
    icm/server_port_<*> = PROT=SMTP,PORT=<port>
    is/SMTP/virt_host_<*> = <host>:<port>,<port>,...;
    User Maintenance (Transaction SU01)
    u2022        Service user
    You have to create a service user for processing incoming mails in every SAP system client in which you want to receive mails (or status notifications). Call transaction SU01 to create a user with type Service and assign the profile S_A.SCON to this user.
    u2022        User addresses
    Every user that is to receive e-mails in an SAP system requires an Internet mail address. This is also used as a sender address. Enter the Internet mail address for a user in transaction SU01, under E-Mail on the tab page Address.
    Assigning the Client (Transaction SICF)
    Every SAP system client that is to receive and process incoming mails (or status notifications) must have an SMTP server. One SMTP server (SAPconnect) has already been created in transaction SICF and is delivered with every SAP system. Use this to create the first client and then create another SMTP server for each additional client. Configure the following settings on the SMTP servers:
    u2022        Host data
    Enter the sequence number of a parameter is/SMTP/virt_host_<*> from the profile. If you have only created one client and therefore have not specified this parameter type, enter 0.
    u2022        Service data
    Enter the client to which the mails received through the virtual mail host are to be forwarded, and then enter the logon data of the system user that you created for the incoming mails.
    u2022        Handler list
    Enter CL_SMTP_EXT_SAPCONNECT at position 1.
    SAPconnect Administration (Transaction SCOT)
    You have to configure SAPconnect settings for every client that is used for send processes.
    u2022        Default Domain
    Under Settings  Default Domain, define the domain of the SAP system client. This allows for the following to take place:
    u2022         The SMTP plug-in logs on to the mail server using the domain as ID.
    u2022         The message ID of the outbound e-mails is assembled with this domain.
    u2022         If an SAP user who does not have an Internet mail address sends an e-mail, a sender address consisting of the SAP user name and this domain is generated.
    u2022        Nodes
    Each client has an SMTP node. This node is created by the SAP system and cannot be deleted. The following steps need to be carried out to configure the node so that sending Internet mail is possible:
    i.         Make sure you are in the Node view.
    ii.       Double-click the node name.
    iii.      Choose Node in use.
    iv.      In the Mail Host and Mail Port fields, specify the mail server to which the outbound mails are to be sent.
    v.        Next to Internet, choose Settings.
    vi.      Enter the address area of the recipient addresses that are to be reached using this node. In general, * is used if all e-mails are to be sent using SMTP.
    vii.     Enter the output format for SAP documents. We recommend that you use the following settings:
    SAPscript/Smart Forms     PDF
    ABAP list     HTM
    Business Object / Link     HTM
    RAW Text     TXT
    viii.   Confirm your selection.
    Regards,
    Sumeet M Naidu

  • Shop Paper send email issue

    Hi all,
    There is a customised SAPscript form for our special shop papers for PM, printable from PM order using transaction IW32.  
    So far everything is ok. The new shop paper works and if I go in IW32 Order -> Print -> Order then I can see very nice preview. Also,the necessary settings have been done to send mail as PDF attachment.The mail is being sent correctly along with the subject line,however in case of change of language to Finnish,the subject line is being sent blank.Is there any setting required for language change? 
    Thanks in advance for any answer.
    (we have SAP ECC6.0)

    Issue resolved on my own

  • I want to send notifications to outside(i,e mail box) from oracle, and users will approve the notification from email

    Hi
    I have a client required to send notifications to outside email box, and also user will approve this notification through email.(i,e not logged into oracle and approve it) in 11i instance.
    i need to send mail from po department to finance department
    once finance department approves , then mail back to po department that your notificaiton approved.
    from address:=[email protected]
    to address:=[email protected]
    as part of this we did IMAP set up
    and used the following code. and getting the notifications from Oracle to my mail box.
    my main issue is when user approves the wf notifications, it is not showing my specified email address in the attribute #WFM_REPLYTO, always it is showing the IMAP set up wfdev address
    what is the value i need to use for this #WFM_REPLYTO
    eventhough i am sending the to_address email id to the following attribute(wf_engine.setitemattrtext), the workflow approval not working for that email id.
    only if i am using the '[email protected]' in the imap set up, then only approval is working.
    how can i override this to_email address value([email protected]) to my desired email address?
    wf_engine.setitemattrtext (itemtype => l_item_type,
    itemkey => l_item_key,
    aname => '#WFM_REPLYTO', -- to_ address
    avalue => '[email protected]' -- [email protected]
    if any body having some sample code related to this please share on this.
    Thanks
    sam

    Sam,
    Can you find any errors in the Workflow log file?
    Please review the following docs.
    Setting Different Values For Attributes #WFM_FROM & #WFM_REPLYTO Does Not Happen Or Results In SAXParseException (Doc ID 1455191.1)
    How To Change The Default From and Reply To Email Address For Workflow Email Notifications (Doc ID 760477.1)
    Thanks,
    Hussein

  • Shop Paper in Notification

    Hi Experts,
    I am facing the following issues:
    I had created a shop paper as my need, and assigned my own Z-program to the shop paper.Now when, I go to print the shop paper via notification, in that , if i go for print preview, the data is displayed properly and print comes out in properly.
    If i give direct print command without print preview, it only prints the layout and no data comes up.
    Can anyone give solution for the same.
    Thanks
    SUMIT GUPTA

    fIRST CHECK THE DEFAULT PRINTER SETTINGS.
    Second thing is check with your Basis team.They can help you out to solve printer conf from SAP customization

  • Shop Paper for Notification and Order

    Hi All,
    I have assigned shop paper for both Notification and Order. Now when I am trying to print the Order or Notification via Maintenance Order or Notification respectively, both the outputs are in the selectable mode since order is created from notification.
    But user wants that when he is trying to print Order only shop paper for Order should be in selectable mode and same for Notification. I checked the configuration settings for this but could not find anything.
    Are there any settings where we can achieve this.
    Thanks in advance
    Regards,
    Shobha

    OK...try this:
    in OIDB (notification) remove the selection check for all generic entries - this determines what is shown when you try to print.  For example, if you have a setting for doc.type = * and it is checked for selection, each of those will appear when you print.  By removing this selection check for doc type = *, it won't appear for yours.  You should put a line there for your doc type with the selection checked.  If you put a second line there for your doc type without the 'selection' checked - it will show, but be optional when you do a print.
    In OIDG (work order), follow the same logic.  Once you print the order, it will propose to print the notification as well (either selected or just available).  Also, i think you should link the notification and order types in work order config.  
    This works when you are printing a work order, but i'm not sure if you can print the work order from the notification.  I just tried this in my system and did get the notifications to print while printing the work order using the settings i've mentioned.

  • I'm trying to order some photo albums from iphoto for chistmas gifts and there is a notification that keeps popping up telling me I need to send to a p.o. box, the mailing address IS a po box and it still won't let me order. What do I do?

    I'm trying to order some photo albums from iphoto for chistmas gifts and there is a notification that keeps popping up telling me I need to send to a p.o. box, the mailing address IS a po box and it still won't let me order. What do I do?

    I've not seen this message but would think that it might say that you can not send to a PO Box - exactly what is the error message?
    LN

  • Make Mail app stop sending calendar notifications?

    Is there a way to completely disable OS X Mail.app sending Calendar notifications? I use Postbox for mail and I'd like to use Calendar. But with  Apple Mail firing up everytime to send notications, I might have to just use the browser for my calendar (I use google apps).
    Thanks.

    First, make sure you have an outgoing mail account corresponding to each of your incoming mail accounts. The user names must match. Then make sure the right outgoing account is selected when you send. You can change the default selection in
    Mail > Preferences > Composing > Send new messages from:

  • Details of When the print of the shop paper is carried out for notification

    Hi Experts,
    We have a requirement where we need to get the details like : time and date and the Shop-paper used for printing , when a line item of the notification is seleted and printed.
    We have created our own smartform and attached it to the custom shop-paper. We need to capture the above specified details, when the print option is selected . We have also checked the entries in PMPL but not of much help as we need the details as each time the user goes and prints the line items.
    I tried to search for some BADI's but ended in vain.Unable to find out how to move further, Would be greatful for any reply!!!!
    Thanks
    Vidya

    Hi Pete & Sunil .. thanks a lot for the inputs.. but the details are not getting updated in PMPL table.
    The PMPL table is getting Updated only if I download the form.
    The steps followed by us is :
    1. IW53/IW52 -> opened the notification
    2.Go to Menu option : Service notification -> Print -> Item selection .
    3. I selected the items then I selected the shop papers and then print.
    4. Checked the PMPL table ..but no entries where maintained..
    I tried to get the details in the driver program of the smartform itself from the standard include "RIPRIF01"..it Worked !!  but unable to get the Items which where selected for printing :(....Please help..
    Thanks
    Vidya

  • If Quality notification as follow up action fails

    Dear all
    I have a situation where Quality notification is configured as a Follow up action once the UD is made.
    So I am getting Create notification screen once UD is filled and SAVE button is clicked.
    In Case some wrong data is entered in the Create notification screen and I am coming out of Notification without saving the notification.
    The status of the inspection lot is getting flipped to UDed as expected.
    But is there any setting where i can define if the Followup action is not successful( Notification not created), then wont make the UD of Inspection lot also. (OR some user status will get updated saying Notif not created etc..)

    Hi Navdeep,
    Thanks to Anand for his correct feedback.
    Please note that as per standard SAP, unless and otherwise there is a defect created, there can't be a 1:1 link with inspection lot with the notification, though in the notification header table there is a placeholder available (QMEL-PRUEFLOS) to capture this inspection lot field. You are trying to use a follow-up action wherein, after UD you are always creating a notification based on business case. I believe, the FM you are using in follow-up action, is not presently populating QMEL-PRUEFLOS. So there can't be a link to find out when there is failures in notification creation, but UD happening successfully.
    You can try out the below approach -
    Approach - 1
    During the UD save process, there should be additional checks happening. Ask the follow-up FM to update QMEL-PRUEFLOS or TEXT field with inspection lot for all successful notification creation and UD update, and send a confirmation email to approver or task processing partners, or the UD processing user ID (This email part can be skipped in case if this is not required). In case of any failures in notification creation at save, it should truncate the UD save process too and send a message to UD processing user for this failure.
    Approach - 2
    You can create a batch job running at the background to validate for which inspection lot there is no notification created, even though UD is done. Send a mail to the UD processing user to create a notification, as that is not created. User can then create it manually it by updating TEXT field in notification in foreground.
    Thanks,
    Arijit

  • Print Quality Notification

    Hello Experts,
    My client needs to take 3 prints of quality notification everytime as 1 copy goes to Vendor, 1 copy to Accounts & 1 with IQC.
    But even if we select no. of copies more than 1, It prints only 1 copy & every time we need to create new spool request which is unnecessary NVA. I tried one customization in QM.
    I want quality notification printing plant wise.
    In Customizing - Quality Notifications - Notification Processing - User Specific Print Control - No of copies defined are 1 only.
    I tried to keep it Blank or *  but it is not accepting.
    There is one push button for PM so with that can we assign plant and shop papers.
    Thanks & regards
    Mayur

    Hello Krishna,
    I created Print Diversion and assigned to different plants.
    But when I go to quality notificaton and try to take print out, it is showing no. of copies field as 1.
    Though I've maintained no. of copies as 3 in print diversion for each plant.
    I just want to confirm whether this is due to output program assigned to shop paper.
    Thanks & regards
    Mayur
    Edited by: mayur kshirsagar on Feb 25, 2008 1:59 PM

  • Email and sms alerts against Quality Notifications

    I need to send an e-mail and an sms alert to various people within the organisation and to the respective vendor whenever I create a Quality notification. I also need to attach a copy of the print out of the notification in Smart form alongwith the mail. Please suggest.
    Regards
    Sudhir

    Hi,
    You can send the e-mail to all concerned via standard workflow or via using some exits at the time of saving of notification also.
    Thanks
    SUMIT

  • Not able to print quality notification plant-wise.

    Hi,
    We have notification type 'ZP' and we've assigned shop paper - ZC01 - to notification type 'ZP'.
    When we create quality notification with notification type 'ZP' and try to take prints for different plants but still only 1 print out is coming for each plant.
    We try to assign shop paper and desired number of copies to each plant in the customizing SPRO->Quality Management -> Quality Notification ->Notification Processing -> Define printer but still it is taking number of copies as 1 only.
    Please help..
    Warm Regards
    Mayur Kshirsagar
    Cell: 09370 240 534

    Hi Arun,
    Thanks for your reply.
    That's correct, we can specify no. of copies.
    But I want to make default no. of copies for each plant.
    So can we do this in customizing.
    Regards
    Mayur

Maybe you are looking for