Sending sales order through idoc

hai,
Is it possible to send IDOC of sales order in IDES.
If so can anyone pls let me the solution

Yes, You can send IDOC's in IDES for Testing (Client to Client 800 to 000).
For Configuration related you can search in ABAP General Forum
Regards,
Ramesh

Similar Messages

Open Sales orders through IDOC

Hi
We are trying to send the list of open sales orders of a customer in an IDOC to the customer. For example, if the customer has got 15 sales order to be delivered to him , he needs the details of all these 15 orders in an single IDOC
Is there any IDOC message type available for this in SAP R/3 4.7 version or is there a standard solution of sending these details through IDOC
Regards
Anandh

Hi
We are trying to send the list of open sales orders of a customer in an IDOC to the customer. For example, if the customer has got 15 sales order to be delivered to him , he needs the details of all these 15 orders in an single IDOC
Is there any IDOC message type available for this in SAP R/3 4.7 version or is there a standard solution of sending these details through IDOC
Regards
Anandh

How to send sales orders through XI to non sap system

Hello Experts,
i need to send Sales order details from ECC to non sap system.
anybody can help me to proceed with this in detailed way.
i know how to send idoc through xi between sap systems.
But i need between sap to non sap system.
Thanks & Regards,
Lakshmi..

Hi !!
Check this weblog on how to enable SSL:
/people/gregor.wolf3/blog/2005/10/11/setup-https-ssl-for-the-sneak-preview-sap-netweaver-04-abap-edition-on-windows
refer this realtive thread which shows the .NETnet integration with XI
Re: .NET Client Integration with SAP XI
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2131 [original link is broken] [original link is broken] [original link is broken]
for idoc related settings in r/3 refer the below link...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
IDoc to File scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
check this out ..
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFAALEQS/CABFAALEQS.pdf
http://www.thespot4sap.com/Articles/SAP_ALE_Introduction.asp
Also go thru this Blogs
ALE Configuration for Pushing IDOC's from SAP to XI by Swaroopa Vishwanath
Configuration Steps for Posting IDOC's by Ravikumar Allampalam.
IDOC - File scenario
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
configuring IDOCS
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
IDOC scenarios
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
Idoc related setting
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
refer this thread also
Integration between sap and non-sap
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5651.. [original link is broken] [original link is broken] [original link is broken]
also referthe concept of SSO
To undersand SSO scenarios gothro the links in my reply in the following thread:
SSO scenarios and configuring steps
Check the following link to know the procedure for user mapping:
Procedure to follow for user mapping.
The following link gives you more idea on User Mapping:
More Info on User Mapping
Pls reward if useful

Dates fields issue in the sales orders through IDOC

Hi all,
I'm trying to create a sales order through Inbound IDOC using IDOC_INPUT_ORDERS.
I have 2 custom fields in the sales order which are date fields.
I'm populating them from the IDOC segments(using E1EDKT1-tdid, E1EDKT2-tdline) in the user-exit just before the call trasacation statement. These dates are not coming for a few orders... but are getting populated normally for few of them.
But the tricky part is that... if I process the same IDOC for the second time.. the order created is having the dates.
My issue is that.. i need all the orders to be populated with the dates which IDOC have.
Could anyone please help me with this issue.
All the answers/replies are highly appreciated!!
Thanks for you help!

hi,
the following may be of help
There are 2 major exceptions to the batch input internal table. All text data from the segments E1EDKT1/2 and E1EDPT1/2 are not part of the batch input session. Text elements from these segments are posted directly to the data base AFTER the sales order has been created (please note: in order that item texts are posted correctly to the sales order the field POSEX from segment E1EDP01 MUST be transmitted). Also, configurable material information from the IDOC is exported to a global memory and therefore will not be part of the batch input session. Configurable material data is performed in Form CHECK_CONFIGURATION and the data is exported to global memory in the following code:
Exportiert IDOC Daten ins globale Memory
export IDOC data to global memory
call function 'CUXC_IDOC_TO_MEMORY'
       tables
            cfg_instref = xe1curef
            cfg_ref     = xe1cucfg
            inst        = xe1cuins
            part_of     = xe1cuprt
            value       = xe1cuval
       exceptions
            error       = 1
            others      = 2.
One extra piece of useful infomartion if you wish to debug the process is to set your breakpoints at the following points
for Function module IDOC_INPUT_ORDERS
include LVEDAF0F..
CALL TRANSACTION 'VA01' USING bdcdata
                            MODE input_method
                            UPDATE 'S'
                            MESSAGES INTO xbdcmsgcoll.
Now input_method is A foreground process and N for background processing but try changing it to P (pass through mode)
If you have breakpoints in va01, e.g. MV45AF0B_BELEG_SICHERN,(the part where the sales document is saved)
they will be hit, e.g
perform userexit_save_document_prepare.
perform userexit_save_document.
Lastly, don't forget using program SDJEDI , see note 380603 for more information on this
Hope this is useful
Paul Quinn

How to send sales order through xi to the target system

Hi Friends,
i want the help to do the scenario.
I need to send some salesorders, purchase orders which are created in R/3 I need to send those from ECC to some other system (non sap).
what will be the scenario
will any of u help me out?
Thanks & Regards,
Kalyani..

Hi,
You Can Go for RFC-XI--File Scenario OR IDOC -XIFile Scenario OR ABAP ProxyXI----File Scenario
Please let me know if u have any doubts
Regards
Sesh

Sending sale order data

hi,
how can we send sale order data from sapxisap.
are there any standard tcode like BD10 BD12 BD14.
plz help me.
thanks and regards
vijender

For creating sales documents (sales order) through IDOCS you will have to use the T code WE19. In that click basic type and enter order05(IDOC type) and select via message type then enter ORDERS(message type), click execute.
You will get to see many fields.here you have to enter the datas that you enter in the VA01 screen in order to create sales order. The datas such as material name, date, qty, P.O no etc. After entering all the datas, you click standard inbound the IDOC would be created by the system.You can see the created order by going in to VA03 screen.
Next time when you create the IDOC, in same tcode WE19 screen, click existing IDOC and enter the IDOC which you created in the above step and just change the P.O no.Sytem will create new sales order through new IDOC
Before doing all you need to maintain the partner profile in T code WE20

Sales Order Using Idoc

Hello All,
We are creating Sales Order through Idocs : Basic Type - ORDERS05 Message Type - ORDERS
Sales Order is being created but for few Items , Reason for Rejection is set (thts not required in our case).
I am trying to figure out why for some items its happening ?
I tried to check the reason by Processing the Idoc in WE19 but could get through.
Also tried to process the Idoc using FM IDOC_INPUT_ORDERS in Debugging but not able to process further as getting error message : 'Idoc Has Different Status'.
Any input on this would be helpful.
Thanks
Praveen

This problem due to your config in the system, try to create a sales order for the item that posted via Idoc then see same item got rejected.. If yes discuss wtih your funtional guys....

Creation of Sales orders through EDI

Hello,
We have a problem when creating sales orders through EDI.
We are getting IDOCs with a delay of 1 second.Before
creating sales orders through the posting function
module IDOC_INPUT_ORDERS, we need to validate for
reference Purchase order number in the IDOC. If there is
any sales order in the database with the Purchase order
number in the current IDOC that sales order should be
blocked.
We already put a validation in the User-Exit of the
posting function module. Because of the frequency of
IDOCs we receive, this validation is getting failed.
Can anybody tell me, how to process only 1 IDOC at any
given point of time before the Posting process.
Thanks,
Madhusudan.

Hi Sanjeev,
Thank you very much for helping me out in this problem.Still I haven't got the solution.
I tested the above mentioned configuration option by putting the Check Purchase Order Number field to 'A' in the transaction VOV8. But while creating sales orders, it is giving only information message. Is there any other way, to restrict the Duplicate PO value through configuration setup.
can you also explain how to use Enqueue and Dequeue FMs in the inbound posting function module.
Regards,
Madhusudan.
Message was edited by: Madhusudan Budati
Message was edited by: Madhusudan Budati

Problem when setting Reason of Rejection for a sales order using IDOC

Hi All,
I am working on a requirement where i need to put a reason for rejection as 'Item Cancelled' for a sales order via IDOC 'IDOC_INPUT_ORDCHG' in a third party scenerio where the PR is created automatically from the sales order . When the IDOC is run in the foreground I get the information message Subsequent function " 'Purchase requisition from sales document' not possible Item & was rejected "(Message V1579) and the IDOC results in a error when run in the background mode because of the same information message. The message should not appear when a sales order is being processed in the background but still the message is being displayed . Is there any way the message can be suppressed ? Thanks in Advance.
Regards,
Sowmya.

can you send the program how you create a so or po using IDOC, as i've a assignment creating PO using IDOC & then creating a sales order of the PO. and i dont know how to create a IDOC. SO IF you have sample program it would be help full
Thanxs

Creation of Sales Order through EDI

Hi
Can anybody explain in detail the configuration steps involved in creating the sales order through EDI. If possible with screen shots.
Points will be rewarded.
Thanking you
chan

Hi Hari & Siva,
Could you please send the document to my mail id
[email protected]
Thanks in advance
MMVD

How to create a Sales Order through an EDI configuration.

Hi
How to create a Sales Order through an EDI configuration.
Tell me the step-by-step procedure for this.
Any power point presentation would be fine.
Cheers
Maruthi

Hi,
You can go to these links to know little bit about sales order creation through EDI/ALE by means of IDOCS.
http://www.riyaz.net/blog/index.php/2008/01/19/beginners-guide-to-ale-and-idocs-a-step-by-step-approach/
Sales Order Idoc Extension.
http://www.*******************/2007/11/abap-idocs-basic-tools.html
For any specific information, just do a google search(information like message t ype, IDOC type, Functoin module, etc. You will definitely get the information you are looking for
Please reward if this helps you

Import of Sales Order through DTW

Dear All
I am having problems in importing Sales Orders through DTW. I have used the template 'oOrders' and enter the required data in the 'Document' and 'Document-Lines' files.
When, I run the DTW and uploaded the Sales Orders, it was imported successfully. But when I search in SBO, no Sales Order was created.
I have also, unchecked the box 'Test Run', but still it doesnot posted any Sales Order.
Kindly, help me in this regards
Thanks and Best Regards
Nabeel

Dear Gordon
Thanks for your prompt response.
In the 'Documents' template, I filled the following columns:
RecordKey   CardCode            DocDate       DocDueDate
1                  AAJ-KAC-6         20081203      20081203
In the 'Documents-Lines' template, I filled following columns:
RecordKey    ItemCode                 DocDate       DocDueDate     Price   Quantity   Tax Code
1                  701-0020-0000         20081203      20081203         10        10            X0
I, also tried to post the Sales Order manually by entering the above data and SO was posted. But it is not posting through DTW.
Thanks and Best Regards
Nabeel

Error while sending sales order form by fax

hi,
Sending Sales order by fax is not working. While adding output type for Sales order choosing device as 'FAX' is throwing an error saying that 'Error while sending fax with SO_OBJECT_SEND, return code 9'. Anything needs to be configured or we have to code anything in SAPScript program. Please advise.

Hi Harry,
You don't need to write any particular code for sending FAX in SAPscript. But you may need to check some configurations regarding it.
We configure SCOT to send Fax and mails to outside SAP. Check SAP Note 455140 for the configuration of SCOT tcode.
Please refer this link [Sending FAX |Sending FAX from SAP;
It might be helpful.
Thanks,
Daya.

Creation of sales order via IDoc ORDERS05 - specify a reason of rejectio

Hi,
I want to create a sales order via IDoc (type:ORDERS05), i specify for an E1EDP01 segment a reason of rejection (ABGRU),
The sales order is created succefully by calling the FM IDOC_INPUT_ORDERS but the order quantity of the item where i have specified a reason of rejection is equals to 0.
Is this normal? i want that this will take 3 value either 0?
Could anyone help me?
Thx

Hi,
Thank you for ur answer.
I've followed the procedure that you have explained and the Quantity 3 have been succefully passed to VA01 but is set to zero when i execute the next OK-CODE (=UER2, i think it is llike Enter button ). I simulate the same procedure by creating a sales order on VA01 and i've finally found the problem : at item level, if i enter the Material (MATNR), the order Quantity (KWMENG) and the Reason of rejection (ABGRU), the quantity is set to zero after clicking the enter button ; but if i enter only The material and The quantity followed by enter button, and enter after the Reason of rejection, it works fine, the Quantity doesn't change.
What is the solution that you propose to me?
I've try this one on debugger mode:
The FM which interpret the Idoc create the sales order by CALLING TRANSACTION 'VA01' USING bdcdata....
I've modified the bdcdata to implement the sequence of the steps before (MATNR + QTY <ENTER> ABGRU <ENTER>).
1. Is it possible to code this modification?
2. Is there a way to structure the Idoc for having this sequence in bdcdata?
Thanks in advance!
Narivelo

Creating sales order using IDOC - Delivery hour

Hi,
i've a problem to solve. when creating a sales order i need that when the segment is E1EDK03 and the IDDAT is 002 i need to extract the delivery hour and insert it in the table vbak-vzeit, now what i'm doing in the exit EXIT_SAPLVEDA_001 is:
DATA: hour LIKE vbak-vzeit.
CHECK segment-segnam = 'E1EDK03'.
IF segment-sdata(3) = '002'.
hour = segment-sdata+11(6).
ENDIF.
and now i want to acess the value in hour in the exit EXIT_SAPLVEDA_002 to put it in the dxvbak struct tha i think that is the table correct to then internaly fill the vbak. the problem is that the variable hour is not available in the exit EXIT_SAPLVEDA_002. i do i do to pass the value that i want from the exit EXIT_SAPLVEDA_001 to be available in exit EXIT_SAPLVEDA_002 and then insert that value in the right place to fill vbak.

Can u tell me the steps to create a sales order using idoc, i've created a bapi but thats a temprory use. I wanted to created a sales order automatically when a purchase order is saved.
Please let me know if u can help me, i wanted to do it using idoc
Regards
Sanju

Sending sales order through idoc

Similar Messages

Maybe you are looking for