Sending SMTP mail using Mailgun does not work from Azure, but works from on premise

I am using Mailgun to send email from my web application. When I test the application from my development box, the e-mail is sent and received I see the logs in Mailgun site as well. However, when I publish the code to Azure and send the e-mail, it is not
sent. I don't see it in the Mailgun logs either.
Is Azure blocking Mailgun SMTP? I appreciate any help.
Thanks,
Jay

Hi Jay,
From your description, I guess you may send mail via SMTP. I don't recommend you use SMTP method to send mail on Azure cloud service. You can use the MailGun API to send mail, Please refer to this document (https://documentation.mailgun.com/user_manual.html#sending-via-api
). Or you can use Sendgrid, please see this blog (http://blogs.msdn.com/b/patrick_butler_monterde/archive/2010/10/11/sending-e-mail-from-windows-azure-part-1-of-2.aspx).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

In OS Yosemite the search function in Mail, Finder, Spotlight- does not work

MacBook Pro (Retina, 15-inch, Late 2013)
2,6 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 750M 2048 MB
OS Yosemite,
Finder versión 10.10.1
Mail Versión 8.1 (1993)
In OS Yosemite the search function in Mail, Finder, Spotlight… does not work. Messages or documents with the search criteria are there and one could find them manually, but the search function fails to find them. Following advice from Apple Support (728965377):
1. I applied an Apple protocol for adware removal (Remove unwanted adware that displays pop-up ads and graphics on your Mac); I had none, because I had formally utilized a similar protocol that I had found in Internet, actually an app that implemented automatically Apple's adware removal protocol.
2. I rebuild the post boxes in Mail (Mail (Yosemite): Reconstruir buzones); It took a while but it functioned properly
3. I re-install the System (OS X Yosemite: Reinstalar OS X); It took about 4 hours but there was no problem whatsoever with the installation.
Afterwards I searched for messages in Mail, and documents in Finder and Spotlight, without any difficulty. The search function in all of them was working properly. But the next time that I needed to search messages or documents, an hour later or so, the problem reappear and a couple of new issues occurred:
1. in app RagTime 6.5.2 (Build 1821), www.ragtime.de, the menu bar disappears (it is invisible), when one performs certain operations, e. g., calculating a value with a formula, whether it is in a spreadsheet or some other component (text, drawing, etc.). After touching with the cursor the menu bar is visible again.
2. after reading an e-mail in Mail or copying an address, this is seeing as a floating object in the finder and over every application. There is no logical way to get rid of the floating object and neither copying or deleting or cutting it. It is not a big issue but nonetheless bothersome.
3. In Mail, messages with Flag or in VIP contacts cannot be seen in the appropriate folders, only in the Incoming mail folder, together with other messages. It seems to me, this issue is part of same search function problem.
4. The preview function within Mail does not show the attached documents to a message, whether it is in the IN, OUT or Draft boxes.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try again to re-index Spotlight. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Reply to all using ItemReply does not work when specifying messageid

Hello everyone,
I am trying to use the ItemReply token to perform a "Reply to All"
action on a mail item with a known message identifier and include the
original message text in the response. According to the documentation,
the call should be:
ItemReply(7;1;"message-id")
Still, when I execute this token, apparently only a normal reply action
is performed because only the original sender is listed as recipient.
(The message text is properly included)
However, when I manually select the message in the GroupWise client
first and then execute the same call without specifying the message id,
all recipients of the original mail are listed in "To:" as expected:
ItemReply(7;1)
Could it be that the "ReplyTo" parameter is ignored or does not work
when a message id is specified as parameter? (Setting "IncludeText" to 0
does not change anything)
Thanks in advance and best regards,
Peter Hofer

Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

Syncing mail between macs does not work (go daddy account)

I upgraded to Lion on both - my Mac Pro and Macbookpro. I have a go daddy mail account that I switched recently from pop to - imap. I had already problems when I set it up the port numbers that godaddy provided - mail did not work at all (receiving or sending). I am using now "default port" no SSL for outgoing server and in advanced 143, no SSL. I am able to send and receive emails but since I upgraded to Lion syncing does not work well. For example I delete an email on the macpro and it still shows up on the laptop. I read in the forum and changed settings ( like uncheck "move/store deleted messages", changed ports back and forth) still not working. Am also using an ipad and 2 iphones but the computers are priority.
Support from apple told me it is not their problem. Go daddy says the same.

Gmail has its own application you can install to access your Gmail account - it's really good, and will let you view by inbox/starred/labels etc.
Well worth getting:
Gmail Mobile
Not sure whether it works with the E61, but it's worth a try - I really do much prefer it to the pop3 access that's built in for gmail
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Importing .p7b certificates using certutil does not work, but work with IE. I need to automatize certificate installation. Help!

Hello,
I have to add a trusted certificate authority to XP machines to allow use of mail via OWA.
There is a domain, but there are too remote machines which are not in the domain (and it's on them I'm experiencing the problem).
Domain sysdmin sent me the .P7B certificate, which I can load withour problem using import with IE. The certificate is stiored in the Trusted Root Certificate Authorities and it's all ok.
But I need to automatize the certificate import due to the hifg number of these clients as well as the linbe spped (very slow graphic), so I found the certutil utility.
I've tried with several commands (like "certutil -f -v -addstore root filename.p7b" or "certutil -enterprise -f -addstore NTAuth filename.p7b" and several variants), but the utility always said that the certificate is correctly imported, but when checking
with the MMC console I can't find it (and, by the way, trying to load again results in also being notified that the certificate is already loaded!), so all the stuf does not work.
What should I do to be able to import the .P7B in Trusted Root Certificate using command line (.bat file, of course)?
Many thanks in advance for any help!
Max

Hi,
As i can understand you want to import a .p7b file which is a chain of certificates. And certutil is not working.
I too had the same issue. After searching and thinking the alternatives for hours, got a solution which worked for me. Here is it.
Get certmgr.exe tool available with MS .net framework tools.
Try adding this to your batch file
certmgr -add -all -c "File.p7b" -s -r localMachine Root
where File.p7b is the file containing certificates. You can replace the name with your file name.
Check if its working.
Thanks,
Reyaz

Mail search function does not work after reinstalling

Hello!
I recently had to re-install Leopard on my MacBook Pro.
I made a clean install so, I manually copied the Mail folder and preferences from my old home folder to the new one.
All mails are present, and everything works great, apart from the fact that the search function does not work.
I can search for new mails (that came after the reinstall) but the old ones "dont exist" as far as the mail.app goes.
What can I do about it ?

It would probably be easier to do the entire hard drive. The App Store also uses Spotlight, so updating it will help there also. It takes some time to re-index and your computer will/may run slower until it is done.
Direct answer to your question is go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Then go to System Preferences/Spotlight per the linked article and in your user folder, select Library/Mail/V2.
Thanks to leonie for some information contained in this.

BPEL 10.1.3.3 - Receiving Mail using MailService.wsdl not working

Hello Gurus,
We are having both 10.1.2 BPEL server and 10.1.3.3.
In 10.1.2 I could successfully use the mail read method as specified in Sample 117.ReceiveEmails. But when I do the same in 10.1.3.3 I am getting "java.lang.NullPointerException" (while it reads the mail from mail server).
The Surprise is the solution works fine in 10.1.2 but not in 10.1.3.3
(Note: even I couldn't find 117.ReceiveEmails sample in 10.1.3.3 samples directory).
The observation of mine is suppose If I didn't send any mail to the mail account, the service keep polling (based on specified polling interval). but once I send mail to the mail account, the process read the mail from mail server and ends with NullPointerException error. And as expected the mail gets deleted from mail server.
Please help me.
The Error:
Receive_1 (faulted)
[2007/09/06 17:07:58] Starting poll cycle for mail account "freecom-mail".
[2007/09/06 17:07:59] Received no message(s), continuing polling on mail account "freecom-mail".
[2007/09/06 17:08:14] Received no message(s), continuing polling on mail account "freecom-mail".
[2007/09/06 17:08:29] "NullPointerException" has been thrown.less
java.lang.NullPointerException
[2007/09/06 17:08:29] Received message(s) from mail account "freecom-mail", stopped polling cycle.
Mail configuration info:
freecom-mail.xml (mail account file placed in $ORACLE_HOME/bpel/domains/default/metadata/mailservice - I created the last two directories)
<mailAccount xmlns="http://services.oracle.com/bpel/mail/account">
<userInfo>
     <displayName>******</displayName>
     <organization>DubaiWorld</organization>
     <replyTo>*****@****.ae</replyTo>
</userInfo>

<incomingServer>
     <protocol>imap</protocol>
     <host>xxx.xxx.xxx</host>
     <email>[email protected]</email>
     <password>*********</password>
     <folderName>Inbox</folderName>
</incomingServer>
</mailAccount>
Regards
Arun
Message was edited by:
arungoin

An additional information:
Sending Mail using MailService.WSDL is working fine, but we don't know why the receiving mail option fails.
Thanks
Arun

Excel File read using WebUtil does not work. Gives java.lang.NoSuchMethodEr

We have a form which reads from an Excel File. The form works in development env., but in the live env when we deployed the form it does not work. Form fails @ the 1st call to Client_OLE2 where we set the Excel file to read.
For both the envs. the values are given here:
(1.) Client Forms Version : Forms [32 Bit] Version 10.1.2.0.2 (Production)
(2.) Application Server Version : 10.1.2.0.2
(3.) AS Linux Version : (Live) RHEL 5.7 Tikanga / (Dev) Red Hat Enterprise Linux AS release 4 (Nahant Update 4)
(4.) Client Sun JRE Version :Version 1.5.0 (build 1.5.0_10)
(5.) Client Web Browser & Version: I.E 8.0.6001 or Mozilla 3.0.15
(6.) WebUtil Version: 1.0.6Both envs. are the same except the Linux version.
Works fine in Dev but does not work in Live. Other Webutil functions like file open dialog box works fine in live, only this Excel read is not working.
Full Error message
Java Plug-in 1.5.0_10
Using JRE version 1.5.0_10 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\dinesha.IIL
c:   clear console window
f:   finalize objects on finalization queue
g:   garbage collect
h:   display this help message
l:   dump classloader list
m:   print memory usage
o:   trigger logging
p:   reload proxy configuration
q:   hide console
r:   reload policy configuration
s:   dump system and deployment properties
t:   dump thread list
v:   dump thread stack
x:   clear classloader cache
0-5: set trace level to <n>
RegisterWebUtil - Loading WebUtil Version 1.0.6
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
Exception in thread "AWT-EventQueue-3" java.lang.NoSuchMethodError:
com.jacob.com.Dispatch.put(Ljava/lang/Object;Ljava/lang/String;Ljava/lang/Object;)V
     at
oracle.forms.webutil.ole.OleFunctions.set_obj_property(OleFunctions.java:1216)
     at
oracle.forms.webutil.ole.OleFunctions.setProperty(OleFunctions.java:333)
     at oracle.forms.handler.ComponentItem.setCustomProperty(Unknown Source)
     at oracle.forms.handler.ComponentItem.onUpdate(Unknown Source)
     at oracle.forms.handler.JavaContainer.onUpdate(Unknown Source)
     at oracle.forms.handler.UICommon.onUpdate(Unknown Source)
     at oracle.forms.engine.Runform.onUpdateHandler(Unknown Source)
     at oracle.forms.engine.Runform.processMessage(Unknown Source)
     at oracle.forms.engine.Runform.processSet(Unknown Source)
     at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
     at oracle.forms.engine.Runform.onMessage(Unknown Source)
     at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown
Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)We connected to Live AS server via VPN and ran the Form in a client machine (where the Dev. is working) but same problem.
Any help would be greatly appreciated.

Channa,
I sounds like you might have missed a configuration step on your Linux application server (AS). I recommend you go back through the configuration of your AS and verify each step of the WebUtil Runtime Setup Checklist was completed correctly. Seach the Forms Help system on "Runtime Setup Checklist" for a copy of the checklist.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Flash streamed via RTMP (using Flowplayer) does not work; does in IE 9.

I have the latest Flash plug-in and Firefox 6.0.2. Flash files from YouTube work. However, Flash in Flowplayer -- using RTMP streaming -- does not load.
The following page works with latest version of Flash in IE 9:
http://www.3xconversionformula.com/replay/short
However, it simply will not load in Firefox.
I do NOT have any ad blocking plugins, etc.
The Flowplayer page actually allows you to test HTTP vs RTMP vs no streaming and Firefox hangs on RTMP. So, I believe I have found out what the bug is for you, but updating Flash will not remedy the situation. It seems to be a Firefox problem.

AVG 9.0 is installed and the video (Flash in Flowplayer) works with IE 9 and Chrome.
Flash video works in Firefox, but not all Flash files. Flash in Firefox works with YouTube, Adobe's Flash website, and various other places, but not everywhere.
2 URL's are supplied above that contain Flash content that does not work with my Windows 7 (64-bit) Intel Core i7 Toshiba laptop with NVIDIA GeForce graphics card.
On the Flowplayer website -- someone who should know how to properly implement their player with Flash -- Flash does work with Firefox when HTTP and no streaming are used. However, nobody seems to note that this does not work for RTMP streaming.
So, Flash works -- sometimes -- but not all the time. However, the VERY same Flash files DO work on SAME laptop with SAME firewall and no problems with IE 9 and Chrome. Bottom line: RTMP streaming seems to be the issue with Firefox as pointed out on the following website:
http://flowplayer.org/setup/index.html
Attached images:
1. HTTP Streaming
2. RTMP Streaming - Faulty
3. No Streaming
NOTE: Website states, "RTMP The most advanced video streaming technology today."
The following 2 videos will not work with my Firefox:
http://www.3xconversionformula.com/replay/short -- uses Flowplayer as its Flash player.
http://www.schedulicity.com/Essentials/Video-Gallery.aspx -- uses Brightcove as its Flash player.
YouTube works. Also, the Brightcove website itself does work. So, its the implementation of Flash players -- not Flash itself -- that seems to be the problem. However, its not a problem with old versions of Firefox, nor IE 9 or Chrome.

Hand tool using spacebar does not work to move an image

When using another tool on an image, I hit the spacebar to move around in the image but the Hand tool does not work.
I've renamed the folder 12.0 under %appdata%/roaming/adobe/Photoshop Elements and that works until I close Elements 12 and then reopen it.

Suggest that you delete preferences.
In Editor, expert tab, go to Edit>preferences>General. Look for this:
Reset, close PSE, launch again.

When I use send to trash the file does not go into trash but brings up a notice to delete and if I do this it is gone forever?

when i use send to trash it does not go into trash but brings up a message to delete and if I do it is gone forever?
is there a cure for this?

Have a look here: https://discussions.apple.com/message/11291053?messageID=11291053&
Thomas A Reed's tip seems to fix the problem.

Mail- Save Icon does not work

I have noticed with mail since 10.5.2 that the small save icon on the email document does not save attachments / does not work anymore. I have to go to file menu and select "Save Attachments"
Is this a bug or what ??

John,
I only now saw your first post. Have you looked in Mail Downloads folder to see if the attachments were saved there? In Mail 3.x, a quick click of the Save button would be expected to result in an unannounced save to that downloads folder. However, a click and brief hold on the Save button would be expected to result in a Save dialogue.
More info, please.
Ernie

Mail.jar is locked when sending a mail using servlet and not releasing

Hi everybody,
The mail.jar is locked in tomcat while sending the first message and not released until the tomcat get restarts.
the problem is not recorded in any logs.
1. Please create a servlet that sends mail
2. Send a mail to any mailid
3. then after the mail is send please try to delete the mail.jar or please deploy the same servlet again with some small changes (for redeploying take place only a few changes is there - please change any strings a little bit)
then try to send mail using this servlet will not send mail becoause it will not redployed correctely.
when i removed Transport.send(msg); from code it works fine. but ??
please help me to recover from this issue. i don't want to turn on tomcat antiJarlocking and antiresourcelocking to true, becaouse this craete many other problems.
please help me to recover from this issue.
Thanks,
Prasad.N

hi friend
I am using advanced version of jdk. i i have used many other jar files like mysqlconnector, logging, commonhttpclient, etc.... the only problem is with mail.jar. that locks are released when its use completed, but the lock holds until tomcat shutdown in mail.jar.
what may be the reason?
Thanks,
Prasad.N

Sender file adapter - filename containing * does not work

Hi All,
I am doing simple file-file scenario wherein my filename is something like
MATMAS05_XI20070911-150159-088.xml
there are many files having similar kind of name which are supposed to be picked
so simply I can go on writing <b>MATMAS05_XI*.xml</b> in filename
it is not working.. communication monitoring gives error <i>Error occurred while connecting to the FTP server "10.25.117.237:21": java.lang.NullPointerException</i>
But when I use character '?' then it works fine - '?' placeholder for each extra character
I am on SP 20.My adapter is configured properly. FTP server working fine with '?' or simple filename. So bit confused why it is not working with *
Are there some BASIS settings which have to be in place to work it out with * ?
All your inputs are welcome !!
Thank You,
Mugdha kulkarni

Hi
this error is not related to multimple files or sending with the * char.. you can use it
see the below link
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
The error related to the server connection.. also check the ip address is correct or not you configured correctly or not..
also clarfity the correct error description ..
Chilla

"save sent mail on server" does not work

Hello,
When I send a Mail by MAIL via my IMAP account MAIL failed to save the sent mail on the server. However I can see the folder where usually sent mails are stored I have send by web mail. In the preferences I positively checked the "save mail on server" box and chose to store sent mails forever
I also cannot save email drafts. I get always an error message that the mail cannot be saved.
I have a similar issue that deleted mails are not moved to the "trash" folder of my mail account.
Thanks & Regards, Joe

That command is mentioned in the “Renaming, moving, or deleting a mailbox” article, for example, but you wouldn’t find it searching for a solution to your problem in Mail Help amongst other reasons because it’s not a solution, it’s a workaround. Doing that shouldn’t be necessary for Mail to be able to store messages on the server, only for telling it to use a mailbox different from the one it would use by default.
Mail should be able to create any necessary mailboxes on the server or realize that they’re already there. If it doesn’t, it’s because there is something amiss, the problem usually being that the server uses a NAMESPACE feature that Mail doesn’t handle properly and that causes server-stored mailboxes to appear as subfolders of the account’s Inbox, even though they really aren’t — see “Can't create folders, only subfolders of INBOX” in the Courier FAQ, for example. Those IMAP accounts require INBOX to be put in Preferences > Accounts > Advanced > IMAP Path Prefix for Mail to handle them properly.

Sending SMTP mail using Mailgun does not work from Azure, but works from on premise

Similar Messages

Maybe you are looking for