Sending SOAP request from XI and writing a scheduler for this

Dear XI Experts,
My scenario is as follows.
We have two landscapes
1)     XI, R/3
2)     Client System(Remote, Other than SAP)
Now we have to pull the data from client system using WSDL (There will be one method for pulling the data in the WSDL file). The WSDL is provided by the client. We are importing that WSDL as external definition in Integration Repository and implementing the scenario SOAP to XI to RFC and configuring it Integration Directory.
Remember the client will not send the data to XI. Only we have to pull the data as mentioned above.
Problems:-
(i)     How to send SOAP request to the client using XI only?
(ii)     How to write a scheduler for this?
please help us.
Thanks...
Praveen Gujjeti

Ur Suggestion
"My proposition looks like that. in R/3 you have scheduled RFC call in some program. This RFC calls XI and XI is calling using SOAP adapter your client. Then response go back to your RFC and you can handle this data."
As you mentioned, I am not scheduling any RFC call in R/3. If you go through my first query u can find two points where I am having some doubts......
How to send SOAP request to the client using XI only? Is it possible to send a SOAP request from XI?
If so,
(ii) How to write a scheduler for this? So that it will invoke the webservice and get the data from client application(system)

Similar Messages

HTTP error while sending SOAP request using wsdl file

We created SOAP request using the wsdl file ; while sending SOAP request from Altova XMLSpy, we are getting the below error.
HTTP error: could not post file
Can you please explain how to resolve this issue
Regards,
Sanghamitra

there is very little information to help you here.
Can you confirm if this is a SOAP sender scenario or SOAP receiver scenario?
Also do go to thru these links to help you out;
Troubleshooting
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> SOAP
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
SOAP <-> XI <-> RFC/BAPI
Walkthrough - SOAP XI RFC/BAPI

Error while sending a soap request from XML SPY to a webservice in XI

Hi ,
I published a webservice om the XI end and testing it with consuming the WSDL file in XML SPY and sending a soap request from there.
I am getting the following error .
<b>com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name</b>, MessageServlet(Version $Id: //tc/xi/645_VAL_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#4 $)
     at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:380)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Is this error due to the user authentication or due to some other issue .
Please do let me know soon .
Thanks a lot
Nikhil

Hi Ricardo ,
I have the correct port now.
the url looks like
http://<host>:50000/XISOAPAdapter/MessageServlet?channel=:SIEBEL_DEV:SOAP_CUST
when I am testing it in the XML spy. and send a soap server request. I am getting the popup for user authentication . once i put my user id it gives me a error saying
<b>HTTP operation 'POST' could not be performed on URL
'/XISOAPAdapter/MessageServlet?channel=:SIEBEL_DEV:SOAP_CUST&version=3.0&Sender.Service=SIEBEL_DEV&Interface=http%3A%2F%2FOFCOM%2FUNIFY%2FCustomerMaster%5EMI_CUST' due to an error :
The connection to the server was terminated abnormally</b>
Any Idea as to why is such a error is coming
Thanks for the help
Nikhil

Calling SOAP Request from XML Spy

I have published PLSQL web service at Oracle 10g AS.
The web service runs at http://localhost:7201/reqProcess with processRequest as method being exposed.
This web service takes the string as input and return XMLTYPE as out parameter.
Now When I am trying to pass SOAP XML from XMLSPY to above url I am getting folloing errors.
1) I get http error: couldnot post the file /reqProcess/ on server 'localhost' (500)
2) I get SOAP Error as
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
          <SOAP-ENV:Fault>
               <faultcode>SOAP-ENV:Client</faultcode>
               <faultstring>No Deserializer found to deserialize a 'http://wsi.nat.zz.com/2005/06/StandardHeader/:m0:standardHeader' using encoding style 'null'. [java.lang.IllegalArgumentException]</faultstring>
               <faultactor>/reqProcess</faultactor>
          </SOAP-ENV:Fault>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Please help..

Hi Quwang ur help needed
My requirement ...
1) PLSQL as web service : I succesffuly deployed PLSQL Procedure as Web service at 10 10g. The PLSQL takes string (CLOB) as input convert that into XML and store in table and return XMLTYPE as output.
When I am accesing PLSQL WS using browser I am able to send string (basically XML format) as a input and able to receive the result back (SOAP envelop)
2)WS Invocation : After PLSQL WS published I need to pass the SOAP XML which is generated from XYX wsdl file to the PLSQL WS published above. For this req I was using XML Spy to test this. (In actual the clinet will be Sieble that will send SOAP XML to PLSQL WS).
Initially I was generating the SOAP XML from XYZ.wsdl and was directly sending that to PLSQL URL. I was getting error as I described initially.
Next I tried to generate the SOAP request from the PLSQL WS wsdl file and inside the parameter I am sending the SOAP XML as string to the IN paramater of PLSQL WS. This time I am getting some different errors. The first error is same as http error: couldnot post the file /balprocess/balprocess/operation?processRequest on server 'localhost' (500)
and second error is SOAP fault as follows
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
          <SOAP-ENV:Fault>
               <faultcode>SOAP-ENV:Server</faultcode>
               <faultstring>java.sql.SQLException: ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00210: expected '<' instead of '"'
Error at line 1
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at "SCOTT.BAL_A_PROCESS", line 16
ORA-06512: at line 1
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)</faultstring>
               <faultactor>/balprocess/balprocess</faultactor>
          </SOAP-ENV:Fault>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
For ur reference I am pasting the PLSQL WSDL file and the SOAP request xml that I am sending to PLSQL WS URL.
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="bal_a_process"
targetNamespace="http://bal.request.process/bal_a_process.wsdl"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://bal.request.process/bal_a_process.wsdl"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:xsd1="http://bal.request.process/bal_a_process.xsd" >
<documentation>
WSDL for Service: bal_a_process, generated by Oracle WSDL toolkit (version: 1.1)
</documentation>
<types>
<schema targetNamespace="http://bal.request.process/bal_a_process.xsd" xmlns:tns="http://bal.request.process/bal_a_process.xsd" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:dom="http://xmlns.oracle.com/2001/XMLSchema/DOM">
<complexType name="bal_request_process_bal_a_processUser_processRequest_Out">
<all>
<element name="outresponsexmlOut" type="dom:org.w3c.dom.DocumentFragment"/>
</all>
</complexType>
</schema>
</types>
<message name="processRequestOutput">
<part name="return" type="xsd1:bal_request_process_bal_a_processUser_processRequest_Out"/>
</message>
<message name="processRequestInput">
<part name="param0" type="xsd:string"/>
</message>
<portType name="bal_a_processPortType">
<operation name="processRequest">
<input message="tns:processRequestInput"/>
<output message="tns:processRequestOutput"/>
</operation>
</portType>
<binding name="bal_a_processBinding" type="tns:bal_a_processPortType">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/>
<operation name="processRequest">
<soap:operation soapAction="urn:bal-request-process-bal_a_process/processRequest"/>
<input>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:bal-request-process-bal_a_process"/>
</input>
<output>
<soap:body use="encoded" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="urn:bal-request-process-bal_a_process"/>
</output>
</operation>
</binding>
<service name="bal_a_process">
<port name="bal_a_processPort" binding="tns:bal_a_processBinding">
<soap:address location="http://localhost:7200/balprocess/balprocess"/>
</port>
</service>
</definitions>
Request I am sending to PLSLQ WS URL
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <SOAP-ENV:Body>
          <processRequest xmlns:m="urn:bal-request-process-bal_a_process" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
               <param0 xsi:type="xsd:string">     "<a>"aaa"</a>"     </param0>
          </processRequest>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I above SOAP request XML i m testing "<a>"aaa"</a>" as XML string. but this is also getting failed. In actual this will be SOAP XML request from some other XYZ wsdl file.
Quwang ur help needed urgently.
Regards

Transportation failed while sending a request from DEV - Quality

Hi sdns,,,
                   I got an error while sending a request from DEV -> Quality...Am new to transportation.. mayi know.. wat was this error and wat kind of action i need to take over here...
I got an error message like this,,
Start of the after-import method for object type R3TR ELEM (Activation Mode)
Element 0QWSUMHUOOK19OOUIFCLB4T8C was copied from 'modified' to 'active'
Error when activating element 45HKXU7KAG6V1I0L1W3LWEDZC
Element 3Z571P6G8RCDNR3NQAEI8S6YW is missing in version M
Start of the after-import method for object type R3TR ELEM (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20070417044624
Post-import methods of change/transport request I11K903499 completed
     Start of subsequent processing ... 20070417044621
     End of subsequent processing... 20070417044624
Answering getz really appreciated,
Thanks & Regards,
Aluri

Hi,
This error will come when your are transporting any Query/ BW elements to Production system.
when there is element in the deve. class $TEM in your collected objects this error may come, so identify this elements and change this Dev.class to other package used in transportaion.
To change all the elements to common dev. class first collecting the elements using transport connection. secondly, using the Pencil button at the menu of trasnport change to required dev.class.
you can change individaul elements also.
Regards,
Vish.

How to send SOAP request by HTTP POST?

I want to access a SOAP webservice using mx.rpc.soap.mxml.WebService.
Following is my code:
<mx:WebService id="miner_service" wsdl="http://localhost:8080"> <mx:operation name="hello" result="echoResultHandler(event);"></mx:operation></mx:WebService>
When debugging with that, I got such error message:
[Fault] exception, information=[RPC Fault faultString="HTTP request error" faultCode="Server.Error.Request" faultDetail="Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://localhost:8080)"]
Then I use Fiddler try to capture the response returned by server, it's like this:
Error responseError code 501. Message: Unsupported method ('GET'). Error code explanation: 501 = Server does not support this operation.
But when I use python to send SOAP request by HTTP POST, the server will return correct response.
So how can I send SOAP request by HTTP POST?
(I tried <mx:WebService wsdl="http://localhost:8080" method="POST">, but no luck..)

Sorry for my late reply..
There's no WSDL for that SOAP service

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Error while sending SOAP Request to server through XML Spy

i have created a webservice to jdbc scenario application and when i tried to check my webservice with XML Spy by giving inputs to wsdl file as SOAP Request to server, its showing the error like this:
<b><u>Http error : could not POST File</u></b>
It would be good if u explain step by step procedure how to solve the issue.
Thanks & Regards.,
Pushparaju.B

This is the error showing after clicking OK button after it showed the error
Http error : could not POST File
<b><?xml version="1.0"?>

<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
     <SOAP:Body>
          <SOAP:Fault>
               <faultcode>SOAP:Server</faultcode>
               <faultstring>Server Error</faultstring>
               <detail>
                    <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                         <context>XIAdapter</context>
                         <code>DeliveryException</code>
                         <text><![CDATA[
com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:PL_TIMEOUT:
     at com.sap.aii.adapter.xi.ms.XIEventHandler.onTransmit(XIEventHandler.java:451)
     at com.sap.aii.af.ra.ms.impl.core.queue.CallConsumer.onMessage(CallConsumer.java:125)
     at com.sap.aii.af.ra.ms.impl.core.queue.Queue.run(Queue.java:831)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)
          ]]></text>
                    </s:SystemError>
               </detail>
          </SOAP:Fault>
     </SOAP:Body>
</SOAP:Envelope></b>
yes i have the role of XIAPPLUSER
scenario has created by me and i have the authorization to enter into XI

Error 401 while sending SOAP Request to XI

hi friend ..
i am getting Error 401 while sending SOAP Request to XI..
can u suggest me where may be the error?
thanks..

Hi,
Refer these threads:
Testing XI SOAP scenario via XMLSpy
Re: SOAP Sender ADAPTER 401 No Authorisation
Re: XI Web Service - Code: (401) Unauthorized.
Try soap client https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9b16d790-0201-0010-4e9b-baa5f42830d8
Regards
Suraj

Hello. I recently purchased a macbook pro, and is, and learn some things. and I have apple tv, and the question is can I send a movie from macbook and surf the Internet simultaneously without interrupting the movie?

hello.
I recently purchased a macbook pro, and is, and learn some things. and I have apple tv, and the question is can I send a movie from macbook and surf the Internet simultaneously without interrupting the movie?

Welcome to Apple Support Communities
You can't do that in AirPlay Mirroring. AirPlay Mirroring can only mirror your MacBook's display, so you can't do one thing in your Mac's display and another in the TV.
This is a feature that will arrive in Mavericks. Read > http://www.apple.com/osx/preview

When using Firefox Sync on multiple devices, I used to be able to 'send' a tab from one computer to another. Is this still possible? If so, how?

When using Firefox Sync on multiple devices, I used to be able to 'send' a tab from one computer to another. Is this still possible? If so, how?
I don't mean the ability to see what tabs are open on another device (I know how to do this). But if I am at work and find something that I want to read at home, it would be helpful to 'send' the tab to my home PC so that when I return home, it will automatically open that tab for me.

Can anyone help?

HT5787 i buy iphone 4sfrom some friend that's he got it from his friend in canada and me set up software for it from Itunes and it asking now for apple ID that's i don't used it for download apps and me can't open my Iphone right now !! what i should do ?

i buy iphone 4sfrom some friend that's he got it from his friend in canada and me set up software for it from Itunes and it asking now for apple ID that's i don't used it for download apps and me can't open my Iphone right now !! what i should do ?

It's not stolen ,that iphone came from canada to Egypt and me activeted it last night i got the acc from the owner
Thanks for Replay Mr

HT204003 if i open passbook on iphone 5, it always say cannot connect to itunes, any fix from apple tech support? and whats the reason for this problem? why do we have to figure it out and not even apple can give answer??

if i open passbook on iphone 5, it always say cannot connect to itunes, any fix from apple tech support? and whats the reason for this problem? why do we have to figure it out and not even apple can give answer??

actually i found out how to fix it
1 sign out of apple account
2 close down passbook app
3 change year to 2013
4 reopen passbook and sign in at the button with your apple ID
5 change the time to auto update and it should work from now on.
this worked for me let me know if it work for you:)

How do I unlock mac? Someone hacked my account and I wiped my device from iCloud, and now I ask for a four digit code ignition Mac. How do they proceed in that way to unlock my Mac?

How do I unlock mac? Someone hacked my account and I wiped my device from iCloud, and now I ask for a four digit code ignition Mac. How do they proceed in that way to unlock my Mac?

Settings>general>resets>erase all content and settings.
That will put it back to its out of the box state. Set it up with your own apple Id.

I bought iphone 5c 4-5 days back from india and today back button of this phone not working, i am totally dissatisfy with the apple service support. i want replacement

(i bought iphone 5c 4-5 days back from india and today back button of this phone not working, i am totally dissatisfy with the apple service support. i want replacement.)
Hello i am nitin from india, i purchased a iphone5c because i heard that iphone comes with a great coustmer service, but this statment becomes totally wrong today, when i faced coustmer executive at service center of iphone then he said that i have to check it out and it may be a physical damage, ( how it is possible even i carried this phone with anti shock cover guard and its never fall down from my hand.) the simple thing i know that i want my phone replaced, otherwise it would be a great mistake of my life to purchase an iphone.
Thanks to all apple team for your wonderful service,

Welcome to the user to User Technical Support Forum provided by Apple.
For your issue... See here...
Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57
Apple Warranty > http://www.apple.com/legal/warranty/
iPhone Warranty > The warranty is only valid in the country of original purchase... Except for EU Countries...

Sending SOAP request from XI and writing a scheduler for this

Similar Messages

Maybe you are looking for