Sending the rows in an ALV grid chosen by the user to another report

Hello Experts!
I am facing a problem with respect to ALV grid using OOABAP.
I am displaying an ALV grid. The user selects a few rows from this grid and clicks on a button called "Update" which i have incorporated into the grid.
Once the user clicks on update, i should call another report passing only the rows selected by the user. I am using the method "get_selected_rows" do get the indices of the rows selected. But, i am unable to proceed from here. How do i incorporate this logic in my code? Can anyone give me some sample code?
Thanks and Regards,
Smitha

Hi Smitha
Get the rows of the ALV into an internal table . You are right in using the method GET_SELECTED_ROWS.
Suppose li_tab is the internal table in which you have the rows of ALV.
Write this statement in the report from which you are transporting.
EXPORT li_tab TO MEMORY ID sy-repid.
Write this statement in the report to which you are transporting.
IMPORT sel_tab = li_tab FROM MEMORY ID 'Z_Report_Name'.
hope it works.
Reward points if helpful.

Similar Messages

How to decrease the row height in ALV Grid (OOPS).

HI Experts,
I have displayed ALV Grid using CL_GUI_ALV_GRID=>SET_TABLE_FOR_DISPLAY.
I want to decrease the row height and width.
Can any one suggest how to do this?
Regards,
Kumar.

Hi Kumar,
Row height it predefined and you won't change it, but you can adjust column width.
For that use field COL_OPT of layout structure ( type LVC_SLAYO ) to optimize all columns width, or set explicit width using field catalog, setting field OUTPUTLEN for certain column.
Regards
Marcin

How to find the selected item in alv grid or table control

can any one tell me please
how to find the selected item in alv grid or table control

In table control, If you goto screen painter and goto table control properties ( f2 ), there is one check-box w/selColumn check that and give column name. Then add that column to your internal table.
IN PAI
LOOP AT it_tkhdr.
    FIELD it_tkhdr-sel_row
      MODULE tab_tkhdr_mark ON REQUEST.
ENDLOOP.
MODULE tab_tkhdr_mark INPUT.
MODIFY it_tkhdr INDEX tc_tkhdr-current_line.
ENDMODULE.                 " tab_tkhdr_mark INPUT
here it_TKHDR is internal table sel_row is field for selection
After that, you can loop at it_tkhdr where sel_row is 'X' to get selected rows.
regards,
Gagan

Event for the List Box in ALV Grid Control

Hello,
I have the below urgent requirment.
I have an ALV Grid Control built using ABAP Objects. In the grid, I have few fields and one of these fields is a List Box. Depending on the values selected, I need to enable or disable some fields. So, is there any event for the List box in ALV Grid Control.
For ex: I have 2 Fields, Designation and Commission. The designation field is a List Box field having 'Software Engineer' and 'Manager' as values. When I select 'Software Engineer', the commission field should be disabled. When I select 'Manager', the comission field should be enabled.
Early reply is hightly appreciated.
Priya

REPORT ZTEST1234 MESSAGE-ID ZZ .
DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: L_VALID TYPE C,
 V_FLAG,
 V_DATA_CHANGE,
 V_ROW TYPE LVC_S_ROW,
 V_COLUMN TYPE LVC_S_COL,
 V_ROW_NUM TYPE LVC_S_ROID.
DATA: OK_CODE LIKE SY-UCOMM,
 SAVE_OK LIKE SY-UCOMM,
 G_CONTAINER1 TYPE SCRFNAME VALUE 'TEST',
 GS_LAYOUT TYPE LVC_S_LAYO.
DATA:BEGIN OF ITAB OCCURS 0,
 VBELN LIKE LIKP-VBELN,
 POSNR LIKE LIPS-POSNR,
 COMISN(10),
 CELLCOLOR TYPE LVC_T_SCOL, "required for color
 DROP(20),
 HANDLE_STYLE TYPE LVC_T_STYL,
 END OF ITAB.
* CLASS lcl_event_handler DEFINITION
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
 METHODS:
**Hot spot Handler
 HANDLE_HOTSPOT_CLICK FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
 IMPORTING E_ROW_ID E_COLUMN_ID ES_ROW_NO,
**Handler to Check the Data Change
 HANDLE_DATA_CHANGED FOR EVENT DATA_CHANGED
 OF CL_GUI_ALV_GRID
 IMPORTING ER_DATA_CHANGED
 E_ONF4
 E_ONF4_BEFORE
 E_ONF4_AFTER,
**Double Click Handler
 HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
 IMPORTING E_ROW E_COLUMN ES_ROW_NO.
ENDCLASS. "lcl_event_handler DEFINITION
* CLASS lcl_event_handler IMPLEMENTATION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
*Handle Hotspot Click
METHOD HANDLE_HOTSPOT_CLICK .
 CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
 V_ROW = E_ROW_ID.
 V_COLUMN = E_COLUMN_ID.
 V_ROW_NUM = ES_ROW_NO.
 MESSAGE I000 WITH V_ROW 'clicked'.
ENDMETHOD. "lcl_event_handler
*Handle Double Click
METHOD HANDLE_DOUBLE_CLICK.
ENDMETHOD. "handle_double_click
**Handle Data Change
METHOD HANDLE_DATA_CHANGED.
 DATA: X_CHANGE TYPE LVC_S_MODI,
 X_FINAL TYPE ITAB,
 L_FLAG,
 LS_OUTTAB LIKE LINE OF ITAB.
 DATA: LS_EDIT TYPE LVC_S_STYL,
 LT_EDIT TYPE LVC_T_STYL.
 LOOP AT ER_DATA_CHANGED->MT_GOOD_CELLS INTO X_CHANGE.
 IF X_CHANGE-FIELDNAME = 'DROP' AND X_CHANGE-VALUE = 'S/W ENGINEER'.
 LS_EDIT-FIELDNAME = 'COMISN'.
 LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_DISABLED.
 LS_EDIT-STYLE2 = SPACE.
 LS_EDIT-STYLE3 = SPACE.
 LS_EDIT-STYLE4 = SPACE.
 LS_EDIT-MAXLEN = 8.
 INSERT LS_EDIT INTO TABLE LT_EDIT.
 INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
 MODIFY ITAB INDEX X_CHANGE-ROW_ID FROM LS_OUTTAB TRANSPORTING
 HANDLE_STYLE .
 else.
 LS_EDIT-FIELDNAME = 'COMISN'.
 LS_EDIT-STYLE = CL_GUI_ALV_GRID=>MC_STYLE_ENABLED.
 LS_EDIT-STYLE2 = SPACE.
 LS_EDIT-STYLE3 = SPACE.
 LS_EDIT-STYLE4 = SPACE.
 LS_EDIT-MAXLEN = 8.
 INSERT LS_EDIT INTO TABLE LT_EDIT.
 INSERT LINES OF LT_EDIT INTO TABLE LS_OUTTAB-HANDLE_STYLE.
 MODIFY ITAB INDEX X_CHANGE-ROW_ID FROM LS_OUTTAB TRANSPORTING
 HANDLE_STYLE .
 ENDIF.
 ENDLOOP.
 CALL METHOD G_GRID->REFRESH_TABLE_DISPLAY
 EXCEPTIONS
 FINISHED = 1
 OTHERS = 2.
 IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDMETHOD. "HANDLE_DATA_CHANGED
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
*& Global Definitions
DATA: G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,"Container1
 G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
*- Fieldcatalog for First and second Report
DATA: IT_FIELDCAT TYPE LVC_T_FCAT,
 X_FIELDCAT TYPE LVC_S_FCAT,
 LS_VARI TYPE DISVARIANT.
* START-OF_SELECTION
START-OF-SELECTION.
SELECT VBELN
 POSNR
 FROM LIPS
 UP TO 20 ROWS
 INTO CORRESPONDING FIELDS OF TABLE ITAB.
END-OF-SELECTION.
IF NOT ITAB[] IS INITIAL.
 CALL SCREEN 100.
ELSE.
 MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
ENDIF.
*& Form CREATE_AND_INIT_ALV
* text
FORM CREATE_AND_INIT_ALV .
DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
CREATE OBJECT G_CUSTOM_CONTAINER
 EXPORTING CONTAINER_NAME = G_CONTAINER1.
CREATE OBJECT G_GRID
 EXPORTING I_PARENT = G_CUSTOM_CONTAINER.
* Set a titlebar for the grid control
CLEAR GS_LAYOUT.
GS_LAYOUT-GRID_TITLE = TEXT-003.
 GS_LAYOUT-STYLEFNAME = 'HANDLE_STYLE'.
GS_LAYOUT-ZEBRA = SPACE.
GS_LAYOUT-CWIDTH_OPT = 'X'.
GS_LAYOUT-NO_ROWMARK = 'X'.
GS_LAYOUT-CTAB_FNAME = 'CELLCOLOR'.
 CALL METHOD G_GRID->REGISTER_EDIT_EVENT
 EXPORTING
 I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED.
CREATE OBJECT G_HANDLER.
SET HANDLER G_HANDLER->HANDLE_DOUBLE_CLICK FOR G_GRID.
SET HANDLER G_HANDLER->HANDLE_HOTSPOT_CLICK FOR G_GRID.
 SET HANDLER G_HANDLER->HANDLE_DATA_CHANGED FOR G_GRID.
DATA: LS_CELLCOLOR TYPE LVC_S_SCOL. "required for color
DATA: L_INDEX TYPE SY-TABIX.
"Here i am changing the color of line 1,5,10...
"so you can change the color of font conditionally
LOOP AT ITAB.
 L_INDEX = SY-TABIX.
 IF L_INDEX = 1 OR L_INDEX = 5 OR L_INDEX = 10.
 LS_CELLCOLOR-FNAME = 'VBELN'.
 LS_CELLCOLOR-COLOR-COL = '6'.
 LS_CELLCOLOR-COLOR-INT = '0'.
 LS_CELLCOLOR-COLOR-INV = '1'.
 APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
 MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
 LS_CELLCOLOR-FNAME = 'POSNR'.
 LS_CELLCOLOR-COLOR-COL = '6'.
 LS_CELLCOLOR-COLOR-INT = '0'.
 LS_CELLCOLOR-COLOR-INV = '1'.
 APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
 MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
 ENDIF.
ENDLOOP.
* setting focus for created grid control
CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
 EXPORTING
 CONTROL = G_GRID.
* Build fieldcat and set editable for date and reason code
* edit enabled. Assign a handle for the dropdown listbox.
PERFORM BUILD_FIELDCAT.
PERFORM SET_DRDN_TABLE.
* Optionally restrict generic functions to 'change only'.
* (The user shall not be able to add new lines).
PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
**Vaiant to save the layout
LS_VARI-REPORT = SY-REPID.
LS_VARI-HANDLE = SPACE.
LS_VARI-LOG_GROUP = SPACE.
LS_VARI-USERNAME = SPACE.
LS_VARI-VARIANT = SPACE.
LS_VARI-TEXT = SPACE.
LS_VARI-DEPENDVARS = SPACE.
CALL METHOD G_GRID->REGISTER_EDIT_EVENT
 EXPORTING
 I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED.
**Calling the Method for ALV output
CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
 IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
 IS_VARIANT = LS_VARI
 IS_LAYOUT = GS_LAYOUT
 I_SAVE = 'A'
 CHANGING
 IT_FIELDCATALOG = IT_FIELDCAT
 IT_OUTTAB = ITAB[].
* Set editable cells to ready for input initially
CALL METHOD G_GRID->SET_READY_FOR_INPUT
 EXPORTING
 I_READY_FOR_INPUT = 1.
ENDFORM. "CREATE_AND_INIT_ALV
*& Form EXCLUDE_TB_FUNCTIONS
* text
* -->PT_EXCLUDE text
FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
* Only allow to change data not to create new entries (exclude
* generic functions).
DATA LS_EXCLUDE TYPE UI_FUNC.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
ENDFORM. " EXCLUDE_TB_FUNCTIONS
*& Form build_fieldcat
* Fieldcatalog
FORM BUILD_FIELDCAT .
DATA: L_POS TYPE I.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Delivery'(024).
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-NO_ZERO = 'X'.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-HOTSPOT = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Item'(025).
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '5'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Drop'(025).
X_FIELDCAT-FIELDNAME = 'DROP'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '5'.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-DRDN_HNDL = '1'.
X_FIELDCAT-DRDN_ALIAS = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Comissn'(025).
X_FIELDCAT-FIELDNAME = 'COMISN'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = L_POS.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-EDIT = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
ENDFORM. " build_fieldcat
*& Module STATUS_0100 OUTPUT
* text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF G_CUSTOM_CONTAINER IS INITIAL.
**Initializing the grid and calling the fm to Display the O/P
 PERFORM CREATE_AND_INIT_ALV.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
 WHEN 'BACK'.
 LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form SET_DRDN_TABLE
* text
FORM SET_DRDN_TABLE.
DATA:LT_DRAL TYPE LVC_T_DRAL,
 LS_DRAL TYPE LVC_S_DRAL.
LS_DRAL-HANDLE = '1'.
LS_DRAL-VALUE = 'S/W Engineer'.
LS_DRAL-INT_VALUE = 'S/W Engineer'.
APPEND LS_DRAL TO LT_DRAL.
LS_DRAL-HANDLE = '1'.
LS_DRAL-VALUE = 'Manager'.
LS_DRAL-INT_VALUE = 'Manager'.
APPEND LS_DRAL TO LT_DRAL.
**Setting the Drop down table for Reason Code
CALL METHOD G_GRID->SET_DROP_DOWN_TABLE
 EXPORTING
 IT_DROP_DOWN_ALIAS = LT_DRAL.
ENDFORM. " set_drdn_table
Regards
vijay

How to keep track of the changes done in ALV GRID Report

Hi Experts,
how to keep track of the changed record in ALV GRID Report. how to set the field to be editable even for the entire row also. Can anybody guide along with code also?...
Valuable answers will be rewarded.
Thanks,
Satish.

Hi,
Access the table through SM30. It comes blank as standard. Click "New Entries" and make entries for changes to be tracked. For example, whenever an org. unit changes 002 and 003 relationship, you will make entries like:
01 O 1001 B002 Activate box checked
01 O 1001 B003 Activate box checked
Here, 01 is your active plan version, O is org. unit, 1001 is infotype and B002 and B003 are the subtypes. You can also use * for infotype and subtype which means every change will be logged.
If you then run the report RHCDOC_DISPLAY through SA38, it will pick up all the changes pertaining to B002 and B003 relationship for org. units (in the above example).
Similarly, you can set up this table for other object types.
For more information, follow SPRO>Personnel Management>OM>Basic Settings>Activate change documents and go through the documentation for that node. Also, read up the documentation for the report.
Hope this helps.
Donnie

Multiple values in row in an alv grid

Hi experts,
I have to display data through alv grid control. The problem is I have multiple values in a row for one one field.
How should i display the data for this field in an ALV.
I need to display data like the fomatt:
field1   field2    field3    field4
1           2            5           6
             3
             4
7           8           12          13
             9
            10
            11

Hi,
first ur getting data like for 1st field having one itab with common field (eg) belnr is common field 1st field is (BLART) and 2nd field contain another itab with common field like that 3rd upto 4.
In that common loop itself you have to find which field having more records use the code like
itab1[] = gv_itab[]."pass the 1 field itab to another itab.
DELETE TABLE itab1 WITH TABLE KEY fieldname NE field value. " delete without common value.
DESCRIBE TABLE itab LINES li."1 field internal table
like that you have to do 4 fields itab.
Which is having more record loop the field itab table and use read statement for rest of field itab
and use append statement for getting final itab.
regards,
Dhina..
Edited by: Dhina DMD on Jun 16, 2011 1:17 PM

Row Selection in ALV Grid created using CL_GUI_ALV_GRID

Hi,
I have ALV grid using cl_gui_alv_grid. I want to capture the row selection and display the selected rows in 2nd ALV grid (using cl_gui_alv_grid).
Method CALL METHOD Grid->get_selected_rows giving right no. of selected records first time and process these records by POST button and hence shows these records in next alv grid. but when i came back to 1st ALV by pressing BACK button on 2nd ALV then if I again select records on the same 1st ALV grid the same Method CALL METHOD Grid->get_selected_rows fires again. but this times it wouldn't give the selected records. I mean first time this gives me correct no. of selected records but 2nd time wouldn't.
how do I capture the row selection.?
Kindly suggest me. helpful answer will be appreciated.
Thanx in Advance.
Robin

Hi,
Write this code, you have to free the container.
MODULE user_command_0101 INPUT.
CASE sy-ucomm.
    WHEN 'BACK'.
       c_container->free( ).
       c_container1->free( ). " this is the container of secondary list.
       clear: r_grid, r_grid1, c_container, c_container1.
      LEAVE TO SCREEN 100.
ENDCASE.
Regards and Best wishes.

The Visible attribute on alv grid column is not changed after Change Layout

Setup:
I have a program that displays output in an ALV grid (using cl_salv_table).
The ALV grid is displayed within a custom control on a subscreen.
I have 4 subscreens being used on a tabstrip control. So I have 4 ALV grids total (one on each subscreen).
On each ALV grid, I have set the set_layout_change function to true so that the user can hide and unhide columns etc. on each grid via the button on the alv grid toolbar.
I also allow the user to dowload the contents of all 4 grids to excel. To do this I have a custom button that when clicked goes to each ALV grid - gets the column metadata (via cl_salv_columns_table-get() ) and checks the visibility to determine if the column should be downloaded or not (via cl_salv_column-is_visible() ) to excel.
The Problem:
As I said I have 4 grids being displayed via a tab control. Let's say the user is on tab 1 and unhides some columns on the alv grid 1 via the Change Layout... button. And then the user navigates to tab 2. If they click the download button at that point - when the download code is run and it checks the visibility of the columns on alv grid 1 - the changes that were made via the Change Layout... button have not synchronized yet. When I call is_visible() for a column that was unhid it still comes back as false.
The only way I have found to remedy this is to make the user click on a button on the alv grid's toolbar before navigating to a different tab to force the synchronization between the changes made and the backend column metadata. However, this is not the best option and requires training for the user that they have to do this for the download to work correctly.
The Question:
1) why is the Change Layout... button not automatically synchronizing the changes it made to the back end? Is there a way to make it do this?
2) OR, is there a way that I can force the synchronization within the code and not force the user to click a button on the alv grid? If there is a way to force the synchronization - where do I put that code? As far as I can tell, when I switch between tabs - I am unable to catch that action in my PAI events.
Thanks in advance for any help.

I was able to resolve this issue with a satisfactory solution.
In my program I had a local class definition to handle the grids' events. When the synchronization wasn't working I only had two events defined: for link_click and added_functions.
I created another definition for event after_salv_function:
on_after_salv_function for event after_salv_function of cl_salv_events importing e_salv_function
There is no code in the method implementation - but adding this event handler now causes a synchronization to occur after the Change Layout is done.

How to Edit the CheckBox in Classic ALV GRID Display

Hi,
I want to Edit the checkbox in Grid Display.
I have one checkbox field in my internal Table,
Code Of the Program,
Data :
Begin of itab occurs 0,
CHK type C,
MATNR like MARA-MATNR,
end of itab.
Iam building the fieldcatelog using Merge Funcion module.
After that I am chaning the properties of the field
catelog like below,
loop at I_FCAT assigning <FCAT>.
Case <FCAT>-Fieldname
When 'CHK'.
<FCAT>-Checkbox = 'X'.
<FCAT>-INPUT = 'X'.
I dont have edit option in fieldcatelog.
modify I_FCAT from <FCAT>.
endcase.
endloop.
In the Layout,
I_LAYOUT-box_fieldname = 'CHK'.
I_LAYOUT-box_tabname = 'ITAB'.
It is displaying the Checkbox field.but I couldnt edit the checkBox.
I can able to edit in REUSE_ALV_LIST_DISPLAY.
But I have to use REUSE_ALV_GRID_DISPLAY.How to edit the checkbox.
Thanks in Advance,
Sumithra

Hi vasu,
The below procedure explains you to create a checkbox cloumn in the grid and allows you to edit i hope this will helps u.
The ALV Grid Control displays the cells of a column as checkboxes if the column is marked as a checkbox column in the field catalog.
 Add another field to the output table in which you want to display checkboxes
OR
 Define an existing field as a checkbox.
Procedure
1. Add a field to your output table:
Data: gt_fieldcat type lvc_t_fcat.
Types: begin of gs_outtab.
Types: checkbox type c. "field for checkbox
Include structure <ABAP Dictionary structure> .
Types: end of gs_outtab.
Data: gt_outtab type gs_outtab occurs 0 with header line.
2 * Add an entry for the checkbox to the field catalog
clear ls_fcat.
ls_fcat-fieldname = 'CHECKBOX'.
* Essential: declare field as checkbox and
* mark it as editable field:
ls_fcat-checkbox = 'X'.
ls_fcat-edit = 'X'.
* do not forget to provide texts for this extra field
ls_fcat-coltext = text-f01.
ls_fcat-tooltip = text-f02.
ls_fcat-seltext = text-f03.
append ls_fcat to gt_fieldcat.
regards,
venu.

How does the SORT function in ALV grid work?

Hi,
I have a report for which the o/p is displayed in ALV grid format.There is one column in the O/p strcuture which is "No of days".Based on certain conditions,i need to display the value for some of the days as Negative e.g. " - 45".Becasuse of this,I have declared the field for the "No of days" of the type "CHAR".
Now when i sort(using ALV grid SORT function) the list on basis of this column,it doesnt give me the correct o/p.
CAN anyone tell me how do i handle this?I want the list to be sorted correctly on basis of the "No of days" column.
Thanks!

This is your Fourth Cross Posting in last three days on same issue!!
CHAR type column doesnt work for SORT function in ALV grid!
How to sort a column of type CHAR
I dont,ve link for your Fourth Thread on same,though i'm short memory loss.

Is it possible to transport the layouts of an alv-grid?

Hello,
is it possible to transport the layouts of an alv-grid and does anybody know how to do this?
Regards, Lars.

Hi
LS_VARI TYPE DISVARIANT.
LS_VARI-REPORT = SY-REPID.
LS_VARI-HANDLE = SPACE.
LS_VARI-LOG_GROUP = SPACE.
LS_VARI-USERNAME = SPACE.
LS_VARI-VARIANT = SPACE.
LS_VARI-TEXT = SPACE.
LS_VARI-DEPENDVARS = SPACE.
CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
 IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
 IS_VARIANT = LS_VARI
 IS_LAYOUT = GS_LAYOUT
 I_SAVE = 'A'
 CHANGING
 IT_FIELDCATALOG = IT_FIELDCAT
 IT_OUTTAB = IT_FINAL[].
try this
regards
vijay

Adding a color to row of a alv grid using function modules

Can anybody clearly explains me how to add a color to a row to an alv grid using function module reuse_alv_grid_display.
thanks in advance
regards
anil.

hi,
chk this ample pgm
report zxyz_0004
 no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
 matnr type mara-matnr,
 mtart type mara-mtart,
 maktx type makt-maktx,
 color_line(4) type c,
 tcolor type slis_t_specialcol_alv, "cell
 end of imara.
data: xcolor type slis_specialcol_alv.
start-of-selection.
perform get_data.
perform write_report.
Get_Data
form get_data.
imara-matnr = 'ABC'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for ABC'.
append imara.
imara-matnr = 'DEF'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for DEF'.
append imara.
imara-matnr = 'GHI'.
imara-mtart = 'ZCFG'.
imara-maktx = 'This is description for GHI'.
append imara.
loop at imara.
 if sy-tabix = 1.
 imara-color_line = 'C410'. " color line
 endif.
 if sy-tabix = 2. "color CELL
 clear xcolor.
 xcolor-fieldname = 'MTART'.
 xcolor-color-col = '3'.
 xcolor-color-int = '1'. "Intensified on/off
 xcolor-color-inv = '0'.
 append xcolor to imara-tcolor.
 endif.
 modify imara.
endloop.
endform.
WRITE_REPORT
form write_report.
data: layout type slis_layout_alv.
layout-coltab_fieldname = 'TCOLOR'.
layout-info_fieldname = 'COLOR_LINE'.
perform build_field_catalog.
CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
 exporting
 is_layout = layout
 it_fieldcat = fieldcat
 tables
 t_outtab = imara.
endform.
BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '18'.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Type'.
fc_tmp-fieldname = 'MTART'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '4'.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-emphasize = 'C610'. " color column
append fc_tmp to fieldcat.
endform.
anil , pls chk this link also.
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid_color.htm
very hlpful.
rgds
anver
pls mark points if ur issue solved
Message was edited by: Anversha s
Message was edited by: Anversha s

Get only the rows where there are no matches in the tables

To include in the results of a join with no matching rows, you can use a full outer join. In MS SQL Server provides the FULL OUTER JOIN operator, which allows you to include all rows from both tables, regardless of the presence or absence of values.
You can add a WHERE clause in a FULL OUTER JOIN to get only the rows where there are no matches in the tables. The following query returns only those products for which there are no matches in the sales order.
SELECT p1.Name, p2.SalesOrderID
FROM TAB1 p1
FULL OUTER JOIN TAB2 p2
ON p1.ProductID = p2.ProductID
WHERE p1.ProductID IS NULL
ORDER BY p.Name ;
FULL OUTER JOIN is not supported in ABAP. How can you solve this?
Thanks in advance,
Serena

Similar problems can often be solved by using subqueries, please have a look here and try applying it.
http://help.sap.com/abapdocu_702/en/abenwhere_logexp_subquery.htm
Thomas

How can I get the selected rows from two ALV grids at the same time?

I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.

Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu

Row seperator in the ALV grid display after the various highest level prod.

Hi,
I have a requirement like user wants a row seperator against the various high level products (Each parent material)in ALV Grid display.We made this change but quantity and pricey fields showing the zero's in the blank line.i know that if we use NO-ZERO
in the ALV field catalog , we can remove the zero's from blank line. But other zerou2019s will remove from rest of the line items. User want's the zero's in other line items, but not in the blank line.
We can convert packed fileds into character format, but this will effect to the summing the quantity, price coumns.
If any body have idea on above mentioned.
Regards,
SK.

Hi Suresh,
There is no short cut for this requirement. You have to do following steps.
1. Change the data type of column to char.
2. Programatically find the totals.
Reagards,
Anversha

Sending the rows in an ALV grid chosen by the user to another report

Similar Messages

Maybe you are looking for