Sending XML as the body of a HTTP request

I have to write an application that interacters with a server that expects XML encoded commands as the body of a HTML request. Can anyone tell me how I should do this.
Thanks.

Similar Messages

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

How do I extract the BODY of a POST request?

How do I extract the BODY of a POST request?
Is this possible?

Yes, this is true but why is it that after I use
request.getInputStream() then request.getParameterValues()
stops working correctly?

Why do the attachments I'm trying to send open in the body of my email rather than as an attachment icon?

I'm having trouble with attachments. When I select a document to attach, in either Word (doc) or pdf, sometimes the whole file opens in the body of the document, instead of just appearing as an attachment icon. I can't figure out why this only happens sometimes...seems to happen more with documents I've scanned in and saved as either Word or PDF files - what might I be doing wrong?

There is nothing wrong. I never understood why Apple Mail shows attachments randomly as icon or inline documents or a mix of them.
If you ctrl+click the PDF or Word document you should be able to choose from the menu, show as icon.
If you want to permanently show the attachments as icons, close Apple Mail, open Terminal and issue the following command
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes

OATS Enhancement: Verify the response contents of http requests which enclosed by begin/endconcurrent

Recently I’m testing the Fluid UI with OATS 12.4.0.2.
In this test, since the browser get all tiles in current page simultaneously, I have to simulate this behavior in OpenScript/OLT.
Then I put all those http requests into a concurrent block ( marked by begin/endconcurrent statments) and it works fine.
But this bring in a limitation: so far, the OATS doesn’t support to verify the http response contents if those http requests resided inside the concurrent blocks.
So I did an enhancement for OpenScript to overcome this limitation. I think it might useful if you have similar test scenario.
How to use it:
Put the attached file ConcurrentHTTPService.java into your OpenScript project folder ( same folder as where your script.java living).
Replace the alias line for http in script.java, the below is after replacement:
//@ScriptService oracle.oats.scripting.modules.http.api.HTTPService http;
@ScriptService ConcurrentHTTPService http;
3. Put your http.get inside concurrent block as usual:
http.beginConcurrent("Get_Tiles_Concurrently");
//The below IDs are useful for later. We use this ID to identified the http requests inside the concurrent block.
//If you dn’t have those IDs, it’s OK, we can use the full URL string (including all parameters)to do the same thing,
//but the full URL is very long, and I hate the screen were occupied by URLs…
http.get( 193, "http://Page1",...);
http.get( 194, "http://Page2",...);
http.endConcurrent("Get_Tiles_Concurrently");
4. After endConcurrent statement, We can use the following methods to get the http response content by RecID or full URL:
//Those methods should be used after the endConcurrent statement
//Get the response contents:
//Please reference the http.getLastResponseContent method for the explain of parameters.
info("Resp 193/Page1:" + http.getLastResponseContentForConcurrent(193,Source.Html));
info("Resp 193/Page1:" + http.getLastResponseContentForConcurrent("http://Page1",Source.Html));
//Verify the response contents:
//Please reference the http.AssertText method for the explain of parameters.
http.AssertTextForConcurrent(193, "Text Match Name", "Key_word_should_appear_in_response_content_of_request_193/page1",
Source.Html, TextPresence.PassIfPresent, MatchOption.Exact);
http.AssertTextForConcurrent(("http://Page1", "Text Match Name", "Key_word_should_appear_in_response_content_of_request_194/page2",
Source.Html, TextPresence.PassIfPresent, MatchOption.Exact);
Done!
Thank glenn.s in this thread: How to test asynchronous web service.

I think I have the solution to your dynamic addressing problem, but I have a problem combining HTTP authentication with dynamic address resolution.
I've got an external service that requires basic authentication and I've handled it successfully by adding a <MustSupportBasicAuthentication> block to the WSDL, as described in the article "Basic Authentication in HTTP SOAP BC" (http://wiki.open-esb.java.net/Wiki.jsp?page=HTTPBasicAuthentication). This works perfectly, causing the HTTP BC to send credentials every time it accesses the external service.
Now I want to make the URL of this external service dynamic (i.e., read it at run time from a configuration mbean). I followed the example from the article "Using Dynamic Address feature" (http://wiki.open-esb.java.net/Wiki.jsp?page=UsingDynamicPartnerLinks), which shows you how to send an endpoint reference (EPR), in the form of an <EndpointReference> block. This also works fine.
(I believe this last technique is the solution to your dynamic addressing problem. I've used both with and without BPEL. To use it outside of BPEL, you make a DocumentFragment out of the XML tree that begins with <EndpointReference> and pass it as an argument to the resolveEndpointReference method of your component context. This causes the JBI container to contact the HTTP BC, which understands the EPR.)
My problem is this: once I've dynamically changed the target URL of the external service, the HTTP BC seems to forget that it requires authentication and no longer sends credentials.
Has anyone else experienced this behavior, and if so how did you work around it?

XML Insert into database by direct http request from browser

I want to ask if it is possible to pass a xml filename which valuse should be stored in the database directly by a http request of i.e. IE 5.5.
I mean perhaps such a construction: http://pcziegl/Test_Insert.xsql?posted-xml=http://pcziegl/Test_Insert.xml

The xsql page looks like:
<?xml version="1.0"?>
<xsql:insert-request xmlns:xsql="urn:oracle-xsql" connection="test" table="test"/>
The xml to be inserted:
<?xml version="1.0"?>
<ROWSET>
<ROW num="1">
<NAME>andreas</NAME>
<PASTNAME>fischbach</PASTNAME>
<VALUE>24</VALUE>
</ROW>
<ROW num="2">
<NAME>robert</NAME>
<PASTNAME>loerks</PASTNAME>
<VALUE>40</VALUE>
</ROW>
<ROW num="3">
<NAME>hubert</NAME>
<PASTNAME>fuenfer</PASTNAME>
<VALUE>35</VALUE>
</ROW>
<ROW num="4">
<NAME>konrad</NAME>
<PASTNAME>reiser</PASTNAME>
<VALUE>38</VALUE>
</ROW>
<ROW num="5">
<NAME>lisa</NAME>
<PASTNAME>fischer</PASTNAME>
<VALUE>35</VALUE>
</ROW>
<ROW num="6">
<NAME>wolfgang</NAME>
<PASTNAME>hesse</PASTNAME>
<VALUE>53</VALUE>
</ROW>
<ROW num="7">
<NAME>juergen</NAME>
<PASTNAME>ebbinghaus</PASTNAME>
<VALUE>33</VALUE>
</ROW>
<ROW num="8">
<NAME>joerg</NAME>
<PASTNAME>weigl</PASTNAME>
<VALUE>28</VALUE>
</ROW>
<ROW num="9">
<NAME>tom</NAME>
<PASTNAME>spaarmann</PASTNAME>
<VALUE>33</VALUE>
</ROW>
</ROWSET>
Thanks for your advices.

Help adding to the body of a web request using powershell v2

I am currently working on a project where I need to use a web api. I see the invoke-webservice cmdlet in 3.0 but the servers im working on have 2.0 and I cant upgrade them without the customers approval. With that said I am trying to get this to work using
the .net way and im having issues adding the body of the request. Below is my code that I have so far and I can add the header and url but when I do a GM on $request I don't see anything for body.
Would anybody know how to add the body? I need to add a json object to the body of the request.
$url = "https://remoteserver:8443/oo/rest/roles"
$request = [System.Net.WebRequest]::Create($url)
$request.Headers.Add("Authorization","Basic <Account>")
$request.Method= "Get"
$request.GetResponse()

Here is one way to set up a conversation.
http://stackoverflow.com/questions/22921529/powershell-webrequest-post
\_(ツ)_/

Getting the Details from a HTTP Request using C#

Hi,
Suppose, a user submits a form with some details as Address, Phone Number etc.. to a Web Application. On the client side, I need to have a proxy to intercept this http request message being sent to the Server and get the details in it like Phone number and
Address in this case and display them to user in a pop up box for confirming and if he clicks YES, then only I should forward the request to Web Server/Web Application.
If the user feels that the information shown to him is not correct he can Click NO and the request will not be sent to the Server. Anyone know how to use this in DOTNET WEB APPLICATIONS?
I need to write code for the Proxy Part, I am not sure how to handle HTTP messages and from where to start with. Any help would be of great help.
Thanks
K.V.N.PAVAN

http://forums.asp.net/
Yu have many sections to choose from concerning Web based solutions.

How Do I Strip the Body of an Room Request Before Forwarding to a Delegate?

We have several conference rooms in our Exchange 2010 environment that are mostly delegated by the auto-attendant. We also have a few rooms delegated by an actual person who must approve or decline the request manually. Those rooms have the "Forward
meeting requests to delegates" option enabled so that the delegate gets a copy of the invite in their inbox.
All of our rooms including the manually delegated ones are configured to "Delete Comments" under the Resource Information tab. The problem we have is the forwarded meeting request still contains the body of the invite including any sensitive information
that we might not want a delegate to see. In other words when the delegate receives the invite none of the information has been stripped out and they can see all the particulars of the meeting. When we look at the meeting on the room calendar the information
has in fact been deleted but for some reason the delegate gets the invite before the information is stripped. I'm wondering if anyone has any idea how we can go about stripping the invite before it is sent to the delegate?
Our Mission is to Honor and Empower Wounded Warriors...

Hi,
The DeleteComments parameter specifies whether to remove or keep any text in the message body of incoming meeting requests. If the
AutomateProcessing parameter is set to AutoAccept and this parameter is set to $true, the text in the message body of the incoming meeting requests would be deleted in room mailbox and room calendar but not in the forwarded message to delegate.
Therefore, there is no method to remove the message body from the forwarding message to the resource delegate.
Regards,
Winnie Liang
TechNet Community Support

How to detect the two Enter in HTTP Request Line"

I'm writing a HTTP Server. I want to ask how can I detect the "two <Enter> press" when the client finishes his request.
Suppose the client typed the following:
GET /xxx/index.html<ENTER>
<ENTER>
(Response header and Entity body here)
if the user typed:
GET /xxx/index.html<ENTER>
If-Modified-Since:xxxxxx<ENTER>
(Response header and Entity body here)
How can I solve the above two cases?
I have used the folowing statement but it fails, why?
BufferedReader in = new BufferedReader(new InputStreamReader(socket.getInputStream( )));
String request = null;
request = in.readLine();
Another problem in my WebServerThread is the output to the screen as shown in below:
java.net.SocketException: Connection reset by peer: JVM_recv in socket input stream read
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:85)
at java.net.SocketInputStream.read(SocketInputStream.java:63)
at java.io.InputStreamReader.fill(InputStreamReader.java:168)
at java.io.InputStreamReader.read(InputStreamReader.java:244)
at java.io.BufferedReader.fill(BufferedReader.java:134)
at java.io.BufferedReader.readLine(BufferedReader.java:294)
at java.io.BufferedReader.readLine(BufferedReader.java:357)
at WebServerThread.run(WebServerThread.java:28)

A second <ENTER> following directly after another will appear as empty line when you use in.readLine().

How to get the error code for http request

I have to implement the if..elso loop depending on the error code return as below.
String host="127.0.0.2"
if the this servers is not found or itis down it should return error code, based on that I have to change the host value to some other server like "127.0.0.4" , Can you let me know how it can be implemented? Please help me.

Here is my requirement...
say.. if client hit " http:\\ 172.0.0.3: 1000/index.jsp" and if the server 172.0.0.3 is not available i will set the server host to some other and request will redirect accoringly like " http:\\ 172.0.0.4: 1000/index.jsp"

How can i call shutdown class after the server stopped listening http request

Hi,
I am using wls70sp1. I noticed that the shutdown class called right atfer the
Server state changed to SUSPENDING. Then i saw the <http> *.jsp: destroy>, etc.
see the log file in attachment. how can config the server stop the http listening
first and then do the clean up works? This is very important for us, otherwise,
there is still chance the request be left out.
Thanks
[shut.txt]

Hi,
I am using wls70sp1. I noticed that the shutdown class called right atfer the
Server state changed to SUSPENDING. Then i saw the <http> *.jsp: destroy>, etc.
see the log file in attachment. how can config the server stop the http listening
first and then do the clean up works? This is very important for us, otherwise,
there is still chance the request be left out.
Thanks
[shut.txt]

How to read the Image Data using HTTp Request response

i want to read image data from server please send me any code or answers.
and also i want to exit application using button control for iphone simulator.
thanks in advance.

You would do a URLRequest and download the image. You could save it to disk and then load it or directly create a new image with the binary data.

How do I send a .pdf file in the body of email, not as attachment?

Hello to all you MAC geniuses out there. I am using Pages to design flyers for my business. Then exporting them to a pdf file and trying to figure out how to send them in the BODY of an email and not an attachemnt that they have to open. Not really sure if this is a mail or pages question. It is probably a very simple step I am missing, but never the less can't seem to fiugre it out. Thanks in advance!
Genn

You must take into consideration that HTML & PDF are very different formats with conflicting purposes: HTML is by design intended for flexibility in appearance in such things as font & location of displayed elements, & has no fixed page size. PDF is intended to produce WYSIWYG documents, exactly the same regardless of platform, but requires either the Adobe Acrobat application or a PDF plug-in to do so.
Because of this, there is no way to convert a PDF document into HTML that will completely preserve the PDF's appearance. You can more or less force elements into the same relative position using tables & other HTML features, but pagination cannot be preserved, since no HTML formatted documents will have page breaks.
You also should consider that the appearance of an email message depends on the application used to view it. Most email, including what Mail generates, follows a standard known as MIME 1.0. MIME is designed to identify each element in the message such that different applications can process them according to their capabilities. Thus, since Mail knows how to display image files like gifs, tiffs, or jpegs, they will be displayed as if they were embedded in the text if the MIME tags indicate they should be. Anything Mail doesn't know how to process into displayable text or images, such as PDF's, will be displayed only as an attachment. The same will be true for other email reading applications.
IOW, email is not WYSIWYG. Some apps will show displayable items inline, some won't, even if the MIME type is displayable on your Mac in Mail.
There are several ways you can deal with this. You can try to convert the PDF into HTML, as suggested earlier. You will probably have to tweak the HTML so generated with an editor to get the best results, & deal with such things as pagination, image conversion or resizing, so-called web safe colors, etc. (PDF's are compressed & usually optimized for high resolution printing; to keep the message size down, you may want to convert images to lower resolution jpegs.)
Or, you can convert the entire flyer to a jpeg or png image, which insures WYSIWYG output, but may make text harder to read.
Alternately, you can compose a new message as plain text or as HTML that refers to the PDF's content & either includes it as an attachment or furnishes a link to a web page that contains it. This allows you to reach the widest audience, including those who do not have a PDF app or plug-in.
Whatever you elect to do, remember that what you send in the email is actually a combination of content & instructions about how to deal with it, & that not all recipients will see it the same way, no matter what you do.

PAGES: Sending an exported .pdf in the body of email and NOT as attachment

Hello to all you MAC geniuses out there. I am using Pages to design flyers for my business. Then exporting them to a pdf file and trying to figure out how to send them in the BODY of an email and not an attachemnt that they have to open. Not really sure if this is a mail or pages question. It is probably a very simple step I am missing, but never the less can't seem to fiugre it out. Thanks in advance!
Genn

Ok, so what do I do then? My Question is this. I am using Pages to create email flyers for my business. I have been Exporting them into a PDF File, but they as you say, send as attachements. I need to know how to send them in an email, as an email and not as an attachement.
What do I do to save and send them differently. I know it can be done since I get craploads of Junk mail everyday that look like that. Please help, I have a deadline to meet approaching very soon. Thanks!!!!!!!!!!!!!!!

Sending XML as the body of a HTTP request

Similar Messages

Maybe you are looking for