Sep up Tables Problem

Hi,
I'm trying to delete the data in Set Up tables for Inventory Application in R/3 System. I couldn't able to delete the Data. Can any body guide me how to delete the data from Set Up Tables.
I have used LBWG Transaction.
wht is the problem.
Regards,
Nagesh.

Hi sriram,
I didn't check the entries in ST22 and SM21. my friend got this error i will ask him to delete the set up tables once again. I will refer the note you mentioned to me. I will update if we get any entries in Sm21 and ST22.
I have one more question, i want see the entries in Source System for the specified Data Source. what are the values for each field. take the case, my requirement is i enhanced the extract structure and i added 5 custom fields. before requesting data from BW, i want to make sure that my code written for Custom fields are correct by seeing the Data.
we can check the in several ways. but i want to see the entries in source system.
SriRam appriciated your help. i will reward the points.
can any body guide me.
Regards,
Nagesh.

Similar Messages

Autonomous Trigger / Mutating Table Problem

We have a specific problem in one of our applications being developed where by the database needs to enforce a specific business requirement.
We need to use a database trigger to enforce some data integrity which involves more than one table as such cannot use standard constraint. The integrity has to be maintained in the database as the DML statements may be coming from a Java application or PL/SQL code as such we need the logic all in one place.
The problem being that within the trigger we need to examine the state of the table the trigger is associated with as well as one other table. Obviously using a trigger on a table that is being affected by DML statements causes the dreaded mutating table problem.
One suggested solution to this was to make the trigger or the code the trigger called autonomous. This allows the trigger to execute by only showing the trigger the original state of the table before any of the DML statements have affected it.
The problem is this seems to work for single row DML statements but not for multi row DML statements. In multi row the trigger only sees the original state of the table, not the state of the table plus the changes made by any other actions in the same DML statement.
Below I have shown an example of what I'm seeing.
I have grossly simplified the example code below to only refer to a single table and use stupidly simple logic
I do realise i appear to be implementing uniqueness in my own PL/SQL code, this is purely for the example.
CREATE TABLE mutate_test
id INTEGER NOT NULL,
value VARCHAR2(255) NOT NULL
ALTER TABLE mutate_test ADD CONSTRAINT pk_mutate_test PRIMARY KEY(id);
ALTER TABLE mutate_test ADD CONSTRAINT ck_mutate_test CHECK (value = UPPER(value));
CREATE OR REPLACE FUNCTION duplicate_found(in_value IN mutate_test.value%TYPE) RETURN BOOLEAN IS
PRAGMA AUTONOMOUS_TRANSACTION;
v_value_found INTEGER;
BEGIN
SELECT COUNT(*)
INTO v_value_found
FROM mutate_test
WHERE value = in_value;
IF v_value_found > 0 THEN
RETURN TRUE;
ELSE
RETURN FALSE;
END IF;
END;
CREATE OR REPLACE TRIGGER tr_mutate_test BEFORE INSERT OR UPDATE ON mutate_test
FOR EACH ROW
BEGIN
IF duplicate_found(:new.value) = TRUE THEN
RAISE_APPLICATION_ERROR(-20000,'Duplicate value found');
END IF;
END;
INSERT INTO mutate_test (id,value) VALUES (1,'CLIFF');
INSERT INTO mutate_test (id,value) VALUES (2,'SULA');
COMMIT;
SELECT * FROM mutate_test;
-- Should fail as row 1 already has a value of CLIFF
INSERT INTO mutate_test (id,value) VALUES (3,'CLIFF');
COMMIT;
SELECT * FROM mutate_test;
-- Should fail as row 1 is already set to CLIFF
UPDATE mutate_test SET value = 'CLIFF' WHERE id = 2;
COMMIT;
SELECT * FROM mutate_test;
UPDATE mutate_test SET value = 'CLIFFORD' WHERE id = 1;
COMMIT;
SELECT * FROM mutate_test;
INSERT INTO mutate_test (id,value) VALUES (3,'RONNY');
INSERT INTO mutate_test (id,value) VALUES (4,'TIM');
INSERT INTO mutate_test (id,value) VALUES (5,'MONIQUE');
COMMIT;
SELECT * FROM mutate_test;
-- Wanted result would be row 1 would be updated from CLIFFORD to CLIFF
-- and the others raise errors, or all of them raise errors.
UPDATE mutate_test SET value = 'CLIFF' WHERE id IN (1,3,4);
COMMIT;
SELECT * FROM mutate_test;

This is all from a University application that deals with eLearning.
Shell = Mapping from the system to an external eLearning application, ie: unique id of the Blackboard course shell, or WebBoard board.
Term = Academic term
Sector = University sector, ie: Higher Education, TAFE, etc..
Resource = eLearning tool, ie: Blackboard, WebBoard, etc..
Resource Level = Whether the resource is being offered at a Course or Program level
Resource Mapping = Association of a resource to shell
What we are trying to achieve is that shells cannot be used across sector boundaries.
The real table structure is (grossly simplified again)
CREATE TABLE sector (sector_pk INTEGER PRIMARY KEY);
CREATE TABLE sector_pattern (sector_pk INTEGER REFERENCES sector(sector_pk), pattern CHAR(2) NOT NULL UNIQUE CHECK (pattern = UPPER(pattern)));
CREATE TABLE term (term_pk INTEGER PRIMARY KEY, term CHAR(4) NOT NULL UNIQUE CHECK (term = UPPER(term)));
CREATE TABLE resource_level (resource_level_pk INTEGER PRIMARY KEY, term_pk INTEGER REFERENCES term(term_pk));
CREATE TABLE shell_detail (shell_detail_pk INTEGER PRIMARY KEY);
CREATE TABLE resource_mapping (resource_mapping INTEGER PRIMARY KEY, resource_level_pk INTEGER REFERENCES resource_level(resource_level_pk), shell_detail_pk INTEGER REFERENCES shell_detail(shell_detail_pk));
Based on the Ask Tom article linked I'd liked to use a MATERIALIZED VIEW on the following query
SELECT DISTINCT rm.shell_detail_pk,sp.sector_pk
FROM resource_mapping rm, resource_level rl, term t, sector_pattern sp
WHERE rm.resource_level_pk = rl.resource_level_pk
AND rl.term_pk = t.term_pk
AND SUBSTR(t.term,3,2) = sp.pattern;
Then apply a UNIQUE constraint on that VIEW.
But I'm receiving a
SQL Error: ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view
I'm not sure how to create the MATERIALIZED VIEW LOG entries for the above VIEW.
Any ideas anyone? ;)
Need to do some more reading and research but as Tom says
"I'm asking around about the future of "SQL" as far as enhancments go like that
(will update when I get some feedback), but -- you are not limited to triggers
(in fact, I would avoid triggers as it is virtually IMPOSSIBLE to implement
cross row/cross object constraints with them!!!! at least correctly)"
So I think i'll give up on the TRIGGER approach as it doesn't meet our requirements.

HT4623 I buy one i-phone 4S from store wingate house 93-107 shaftbury Avenue,london.W1D 5DA.tel no. 020 7851 0817 on 30/sep/2012.my problems is, I can not activate my phone because i stay in malaysia ( when i connect using sim card malaysia DIGI line) pls

I bought new i phone model 4S from 3 comunication store wingate house 93-107 shaftbury Avenue,london.W1D 5DA.tel no. 020 7851 0817 on 30/sep/2012.my problems is, I can not activate my phone because i stay in malaysia ( when i connect using the sim card of malaysia DIGI line) it does not read malaysia sim card.Pls help me, how should i use this malaysian digi sim card and deactivate this 3 comunication sim card so i can use any type of sim card in any countries.
The phone details are as follows:
Serial no : 1151NVQLIKA.
My last 6 digit no in my sim 020287.
My 3 no 07450453838
My sim no 8944200009770020287

You probably won't be able to use a Malaysian sim card in your phone. If you purchased the phone from 3, then it is probably carrier locked to 3 and it won't work with any other sim card.
Nobody here can do anything to help you. You need to contact 3, so you need to ring them or go back to the store where you purchased the phone. Not a lot you can do other than activate with the original 3 sim card in situ so that the phone will work.
You can try activating the phone with the 3 sim card and then try swapping them, but I suspect that the phone is carrier locked to 3 and you need to contact them for help. Noone else can do anything really except them.

Mutating table problem help required

Hi. I am rather hoping someone will be able to help me with this problem.
I have two tables, sa and mv. Create script below:
create table mv (
moduleId Char(2) CONSTRAINT ck_moduleId CHECK(moduleId in ('M1', 'M2', 'M3', 'M4', 'M5', 'M6', 'M7', 'M8')),
credits Number(2) CONSTRAINT ck_credits CHECK(credits in (10, 20, 40)),
constraint pk_mv primary key(moduleId)
create table sa (
stuId Char(2) CONSTRAINT ck_stuId CHECK(stuId in ('S1', 'S2', 'S3', 'S4', 'S5')),
moduleId Char(2),
constraint pk_sa primary key(stuId, moduleId),
constraint fk_moduleid foreign key(moduleId) references mv(moduleId)
And the scripts below is to insert data into both:
insert into mv VALUES('M1', 20)
insert into mv VALUES('M2', 20)
insert into mv VALUES('M3', 20)
insert into mv VALUES('M4', 20)
insert into mv VALUES('M5', 40)
insert into mv VALUES('M6', 10)
insert into mv VALUES('M7', 10)
insert into mv VALUES('M8', 20)
insert into sa VALUES('S1', 'M1')
insert into sa VALUES('S1', 'M2')
insert into sa VALUES('S1', 'M3')
insert into sa VALUES('S2', 'M2')
insert into sa VALUES('S2', 'M4')
insert into sa VALUES('S2', 'M5')
insert into sa VALUES('S3', 'M1')
insert into sa VALUES('S3', 'M6')
Now for the actual problems.
Firstly I need to try and overcome the mutating table problem by ensure that stuid = S1 in table sa can not take both moduleId M5 and M6.
Just one or the other. I have created a single trigger, but if fails because of the mutating table problem.
The second problem I need to overcome is that none of the stuids can have moduleIds where total credit value of more than 120 credits. Credit value is stored in the mv table.
Many thanks in advance for any assistance.

Use a statement level trigger:
Firstly I need to try and overcome the mutating table problem by ensure that stuid = S1 in table sa can not take both moduleId M5 and M6.
SQL> create or replace trigger sa_trg
2 after insert or update on sa
3 declare
4 c number;
5 begin
6    select count(distinct moduleId) into c
7    from sa
8    where stuid = 'S1'
9    and moduleId in ('M5','M6');
10    if c > 1 then
11       raise_application_error(-20001,'S1 on both M5 and M6!!');
12    end if;
13 end;
14 /
Trigger created.
SQL> select * from sa;
ST MO
S1 M1
S1 M2
S1 M3
S2 M2
S2 M4
S2 M5
S3 M1
S3 M6
8 rows selected.
SQL> insert into sa values ('S1','M5');
1 row created.
SQL> insert into sa values ('S1','M6');
insert into sa values ('S1','M6')
ERROR at line 1:
ORA-20001: S1 on both M5 and M6!!
ORA-06512: at "SCOTT.SA_TRG", line 9
ORA-04088: error during execution of trigger 'SCOTT.SA_TRG'
The second problem I need to overcome is that none of the stuids can have moduleIds where total credit value of more than 120 credits. Credit value is stored in the mv table
SQL> create or replace trigger sa_trg
2 after insert or update on sa
3 declare
4 c number;
5 begin
6    select count(distinct moduleId) into c
7    from sa
8    where stuid = 'S1'
9    and moduleId in ('M5','M6');
10    if c > 1 then
11       raise_application_error(-20001,'S1 on both M5 and M6!!');
12    end if;
13
14    select count(*) into c from (
15    select stuid
16    from mv, sa
17    where sa.moduleid=mv.moduleid
18    group by stuid
19    having sum(credits)>120);
20
21    if c > 0 then
22       raise_application_error(-20002,'A student cannot have more than 120 credits!!');
23    end if;
24
25 end;
26 /
Trigger created.
SQL>   select stuid, sum(credits)
2 from mv, sa
3 where sa.moduleid=mv.moduleid
4 group by stuid;
ST SUM(CREDITS)
S3           30
S2           80
S1          100
SQL> insert into sa
2 values ('S1','M4');
1 row created.
SQL>   select stuid, sum(credits)
2 from mv, sa
3 where sa.moduleid=mv.moduleid
4 group by stuid;
ST SUM(CREDITS)
S3           30
S2           80
S1          120
SQL> insert into sa
2 values ('S1','M7');
insert into sa
ERROR at line 1:
ORA-20002: A student cannot have more than 120 credits!!
ORA-06512: at "SCOTT.SA_TRG", line 20
ORA-04088: error during execution of trigger 'SCOTT.SA_TRG'Max
http://oracleitalia.wordpress.com

Essbase alias table problem

Hi,
I have a problem while importing a new alias table. I have a Time Dimension which has a child 200901, and which has qtr1,...qtr4, and each qtr has months, and months have dates(stored hierarchy)
like 20090101..so on,
and Time Dim has another child that is week, ,
weeks have childs as dates,(the dates here are shared members)
when i am trying to load new set of alias its getting properly loaded for stored members ,but not getting loaded for shared members.
could anyone sort out what the problem is?
Thanks,
Ram
Edited by: user8774295 on Sep 6, 2009 11:19 PM

HI Ram,
If your outline read like this
Time
     200901
          qtr1.
               20090101( alias: sample_alias)
          qtr2.
     week
          20090101( shared , alias : sample_alias)
Its possible, and I have tried at my end . The same alias would work for the shared member too.
It would actually not work with anyother stored member ,as the same alias name has been used already
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Interactively changing values to table problem: indicator and control table, and why it does not work after a while...?

I have been producing a VI that loads a set of data and displays it in a table: A table control is initialised with an empty variable, the loaded data takes the place of the variable and fills the table, while some headers are added. That table feeds an intensity graph to give a pictorial impression of the data.
With this scheme, a user can change any value of the table, and the changes are interactively reflected on the graph.
Problem: after few saving of the VI, the access to the table doesn't work anymore. It is the same with all my numerical controls in the VI where it should be possible to enter a value.
If anybody has an idea on the potential
causes of these problem, I would be really grateful as it is very useful...when it works !
Regards,
Elie Allouis

I can not image what is causing the error. Would you be willing to post some code to see if we can reproduce the problem?
Jeremy7

Labview 2013 report generation toolkit word 2010 insert table problem

Hi,
I am currently evaluating LV2013 with respect to the report generation toolkit for use with word 2010. My Vi/program won't insert the correct table and gives me an error message. see below:-
Exception occured in Microsoft Word: The requested member of the collection does not exist.Help Path is wdmain11.chm and context 25421 in NI_ReportGenerationToolkit.lvlib:Word_Insert_Table.vi->NI_Word.lvclass:Append Text Table to Report.vi->Word Table save.vi
I have since run the following word example.vi provided by NI within LV2013 office examples:- Growable table.vi. this gives me the same error!
Exception occured in Microsoft Word: The requested member of the collection does not exist.Help Path is wdmain11.chm and context 25421 in NI_ReportGenerationToolkit.lvlib:Word_Insert_Table.vi->NI_Word.lvclass:Append Text Table to Report.vi->Growable table.vi
It would seem that regardless of my own Vi there is a fundamental problem in the office example vi.
I have found examples of a similar problem in LV2011/2012 but the work around code doesn't seem to match the LV2013 vi's code for a direct replacement.
Can anyone help/shed some light on this?
Thanks in advance,
Dan.

Because the upgrade of Word from 2007 to 2010 I needed to upgrade an existing application from LabVIEW 2009 to 2013. This didn't work because of the insert table error. I discovered that the problem is the vi called "Word_Insert_Table.vi" located in the ..Program Files (x86)\National Instruments\LabVIEW 2013\vi.lib\addons\_office\_wordsub.llb. There is a "Cut" command implemented, this command removes the created cell instead of clearing it. Therefore the table will be filled half and then returnes with an error. I have removed this command. I have posted the changed vi (LV 2013).
Attachments:
Word_Insert_Table.vi ‏30 KB

XML Publisher Table problem

Hi,
I have been trying to build a table in a BI Report that does the following my attempts so far have not work. What I would like to happen is to have a table that has 15 rows displayed even if there are not 15 line items and in the event of more than 15 line items I would then like the extra lines to rollover to the next page displaying 15 rows in the table even if the remainder of line items is not 15. The report generates output for multiple customers. Please could someone advise how I could do this?
Thank you,
Mark

A method for soving this problem is described here:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary.html

Update Nested Table Problem

Hi All,
I have a update problem in nested table.
Below is my query:
CREATE OR REPLACE TYPE TRACER.SEARCH_DATA AS TABLE OF VARCHAR2(20);
UPDATE TRACER_SEARCH_SCHEDULE_LOT_NUM
SET NOT_FOUND_SOR_LOT_NUM = SEARCH_DATA(
SELECT
COLUMN_VALUE
FROM
TABLE (SELECT SORTING_LOT_NUMBER FROM TRACER_SEARCH_SCHEDULE_LOT_NUM WHERE JOB_ID = 8)
WHERE
TRIM(COLUMN_VALUE) NOT IN (SELECT DISTINCT (SORTING_LOT_NUMBER) FROM SEARCH_SCHEDULE_RESULT_LOT_NUM WHERE JOB_ID = 8)
) WHERE JOB_ID = 8;
ORA-00936: missing expression
or I try as following
DECLARE
sor_lot_num_not_found SEARCH_DATA :=
SEARCH_DATA
SELECT
FROM
TABLE (SELECT SORTING_LOT_NUMBER FROM TRACER_SEARCH_SCHEDULE_LOT_NUM WHERE JOB_ID = 8)
WHERE
TRIM(COLUMN_VALUE) NOT IN (SELECT DISTINCT (SORTING_LOT_NUMBER) FROM SEARCH_SCHEDULE_RESULT_LOT_NUM WHERE JOB_ID = 8)
BEGIN
UPDATE TRACER_SEARCH_SCHEDULE_LOT_NUM SET NOT_FOUND_SOR_LOT_NUM = sor_lot_num_not_found WHERE JOB_ID = 8;
END;
ORA-06550: line 5, column 9:
PLS-00103: Encountered the symbol "SELECT" when expecting one of the following:
( ) - + case mod new not null others <an identifier>
table avg count current exists max min prior sql stddev sum
variance execute multiset the both leading trailing forall
merge year month DAY_ hour minute second timezone_hour
timezone_minute timezone_region timezone_abbr time timestamp
interval date
<a string literal with character set specificat
ORA-06550: line 11, column 5:
PLS-00103: Encountered the symbol ")" when expecting one of the following:
; for and or group having intersect minus order start union
where connect
ORA-06550: line 14, column 4:
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with
<an identifier> <a double-quoted d
I have try on the Select Statement, it work. So is it the way that I assign data from nested table and update method is wrong?
Edited by: skymonster84 on Mar 8, 2011 5:12 PM

Hi,
I think MULTISET operators might interest you.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/operators006.htm
Not tested :
UPDATE tracer_search_schedule_lot_num
SET not_found_sor_lot_num =
      sorting_lot_number
      MULTISET EXCEPT ALL
      CAST(
        MULTISET(
          SELECT distinct sorting_lot_number
          FROM search_schedule_result_lot_num
          WHERE job_id = 8
        AS search_data
WHERE job_id = 8
;

Dreamweaver MX create tables problem

I am using Dreamweaver MX 6.0 and tried to create a table in standard view, but a sharing error message appeared and shut down the program. When I opened again and tried to create the table again, the dialog window didn't even open after clicking on the insert table button. I installed an update to 6.1, but it still didn't work. I have Windows 7 operating system and am wondering if the problem is due to a compatibility issue with an old program and newer operating system??? Any suggestions or help with this problem would be great!

Based on the info. provided, seems to me the value for 'javaee.home' in build.properties may not be correct. Make sure that the property javaee.home in build .properties pints to valid installtion of application server, for ex. if you do 'dir' or 'ls' you should see javadb directory at this location.
Also check if you have a build.properties file under windows user directory (in addition to bp-project under tutorial) and if it points to a different application server installation.
- sreeni

Glassfish + mysql + jsc2 table problems

I'm trying to deploy my app to a glassfish server and having some problems with tables and rowsets.
Situation:
Everything works fine under the development settings on my winxp machine with mysql and the 5.0 beta jdbc driver.
I managed to get jdk1.5 + glassfish + mysql + 5.0jdbc driver installed on my debian system with 2.6.16 kernel. Non-DB test apps deployed by exporting to a j2ee1.4 war file and then importing through the glassfish admin page work fine. DB apps that I've manually added the db access code to in the prerender() section of the page work fine. I can even get tables to work IF I put the code in the prerender section:
public void prerender() {
        try{
            usersRowSet.setDataSourceName("java:comp/env/jdbc/testcgcbt");
            usersRowSet.setCommand("SELECT * FROM users");
            usersRowSet.setTableName("users");
            usersDataProvider1.setCachedRowSet((javax.sql.rowset.CachedRowSet)getValue("#{Page1.usersRowSet}"));
        }catch(Exception e){
            error("Error "+e.getMessage());
    } But the table displays 'No items found.' with the default db access code in the _init() section:
private void _init() throws Exception {
        usersRowSet.setDataSourceName("java:comp/env/jdbc/testcgcbt");
        usersRowSet.setCommand("SELECT * FROM users");
        usersRowSet.setTableName("users");
        usersDataProvider1.setCachedRowSet((javax.sql.rowset.CachedRowSet)getValue("#{Page1.usersRowSet}"));
    }Has anyone run into this before? I don't know if there are some settings in the .xml files to change to make the exported war work properly. I would love to have my app work without having to cut and paste the code into the prerender() sections, I haven't looked through all my pages and I'm not sure that would work for each one.
Thanks in advance.

Well, it looks like I've found the problem...
The init() section is not being run when the page is loaded. Once I copied the
try{
      _init();
}catch...section into the start of prerender(), everything worked on both the winxp and debian boxes. Put log code at both the beginning and end of the init() method, neither is being run. I am a little concerned as super.init() is not being called, it doesn't seem to affect the test table app I threw together to check this out but I don't know the long-term effects on my main project. Has anyone else had this problem?
I noticed the jsf-impl.jar lib is put into the war archive, jsf-impl.jar also exists in the glassfish lib directory. Unpacking and reading the manifests of both versions reads: spec 1.1 implementation 2.4.1 for the jsc2 version and spec 1.2 implementation 1.2-b19-FCS for the glassfish version. Could this be part of the problem?
This has been tested on glassfish builds milestone 6(b42) and b44 with the same results.

Table Problem x2 within Pages: 1) In the Header; 2) Maintaining a table's starting point when carrying over to the next page.

Pages '09 v4.1
Problem 1:
     I am working with a 2-column Page document. Its my goal to have three items listed in a header in particular positions. Far left shows the paragraph number the page starts with, in the center is a title of the contents of the page, and on the far left is the last paragraph number to appear. To place these three items in the desired positions requires the insertion of a lot of spacing on both sides of the 'centered' title along with counting the characters of the title to find its center to alighn with the center of the page. 253 pages of this to will qualify me to be labled with a severe case of Obsessive Compulsive Disorder. I don't want OCD.
     However, by installing a one row/3 column table in the header my task was made a lot easier in alighnments. But, another problem reared up. Within the header underneath the table is a vertical space remaining. This vertical 'tallness' is equivalent to the font size of 10. Its taking up too much space between the header and the text. It needs to be reduced or eliminated.
     On the left-hand page I am able to reduce the font as far down as '1'. I've settled on using '3'. However, on the right-hand page the font will not accept any size selections be they less or more and remains stubbornly at font 10. Within a Header that does not have a table, I am able to change the font of both left and right pages.
     Is there a another way to approach what I desire for the header other than installing a table in it? Is there a way to alter the font on the right hand pages?
Problem 2:
     Whenever I create a table following text already on a page all is right until the table's growth in construction laps over to the next page. At that point the first row snaps to the top of the following page leaving an undesired area (space) between the last line of the text on the preceding page. Whenever I attempt to drag the table to the desired position it snaps back. This only happens when the table is larger than the remaining area of the page. If the table is started at the top of an unused page and runs beyond the confines of that page than it continues as expected onto the next page duplicating the table header. But to do this it must begin at the top of an unused page. Is there a means to have a table placed in the remaining space of a page and what does not fit continues to the next page in effect having a partial of the table on each page?
So there you have it. Christmas is over and its back to work. Thank-you for your attention.

Regards re-positioning a table:
I went to Inspector>Wrap>Object Placement/Inline (moves with text) and found that the inline option was selected. Some of the rows within the table have two lines of text. Again, I dragged the table to the desired position on a page that is partially composed with text and got the same results as before - the table snapping back to the top of the following page where it initially resided. In this current position the 2-page table does break as it should on the following 3rd page. Below is a schematic of the appearance of the 2-pages involved.
Page 1 left side.
TEXT 1-line as 1-column
TABLE (5-rows)
TEXT (2-columns) 14-lines left column and 13-lines right column.
[Layout Break] otherwise the above textual columns would be all on the left side of the page.
TEXT 1-line as 1-column
* The desired insertion point for a two page table on a page that is 40% filled with the above descriptions.
Page 2 right side.
A 2-page table flowing or breaking into a 3rd page.
Page 3 left side.
The overflow of the subject table.
[Layout Break]
[Section Break]
Is there some other way to anchor a table to the text other than Inspector>Wrap>Object Placement/Inline (moves with text)?

Bdc upload file data into internal table problem with gui_upload fm

Hello experts,
my coding is like this ..
data : begin of itab occurs 0 .
field1 like mara-matnr,
field2......
etc,
end of itab.
data: file1 type string.
parameter :file like rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
static = 'X'
mask = space
field_name = 'FILE'
CHANGING
file_name = file.
START-OF-SELECTION.
FILE1 = FILE . "HERE I AM PASSING INTO STRING
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = FILE1
FILETYPE = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab. " here the data is not populating from the file , it is giving the error like speified table not found.
HERE i am getting the message like "specified table name not recgonised" . the data is not populating into the itab from the file.
file structure is same as the internal table.
I stored the file as .txt( ie in notepad).
my file is like this..
10000 200 323 sunndarrr.......
i had a problem with this bdc , i am getting like "specified table name not recgonised" in the fm gui_upload while debugging.
when i am using the ws_upload it is working fine.
please guide me where i have done the mistake.
thank you so much for all the replies.

Hi,
Have a look on the following code.
TABLES: kna1.
DATA: BEGIN OF itab1 OCCURS 0,
      str(255),
      END OF itab1.
DATA: itab2 TYPE kna1 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
    filename                = 'D:\ABAP EVE\ffile1.txt'
    filetype                = 'ASC'
TABLES
    data_tab                = itab1
EXCEPTIONS
    conversion_error        = 1
    file_open_error         = 2
    file_read_error         = 3
    invalid_type            = 4
    no_batch                = 5
    unknown_error           = 6
    invalid_table_width     = 7
    gui_refuse_filetransfer = 8
    customer_error          = 9
    no_authority            = 10
    OTHERS                  = 11.
IF sy-subrc <> 0.
WRITE:/ 'sorry'.
ELSE.
LOOP AT itab1.
    SPLIT itab1-str AT ',' INTO itab2-kunnr itab2-name1.
    APPEND itab2.
ENDLOOP.
IF sy-subrc = 0.
    LOOP AT itab2.
      WRITE:/ itab2-kunnr,itab2-name1.
      INSERT INTO kna1 VALUES itab2.
    ENDLOOP.
    IF sy-subrc = 0.
      WRITE:/ 'inserted'.
    ELSE.
      WRITE:/ 'not inserted'.
    ENDIF.
ELSE.
    WRITE:/ 'fail'.
ENDIF.
ENDIF.
Flat file:
10001,Sadney
10003,Yogesh
20005,Madan
1.U need to define internal table with one field of max size
2.upload the flat file data into that internal table
3.split that internal table data into another internal table(having fields)
<REMOVED BY MODERATOR>
thanks,
Chandu
Edited by: Alvaro Tejada Galindo on Apr 30, 2008 12:17 PM

Conditional Text in Table - Problems with row height adjustment

Hey there,
I’m german but I try to express my problem in english as good as I can. Not always easy with the different menu names. Hope you get what I want to say! :-)
As you can see in my attached screenshot, I placed text in a table.
Text height is set to: minimum 1,5 … so it adjusts to the amount of text.
This is what I want - it should adjust the height to the marked/aktivated conditional text.
It always adjusts the hight when I blind out the first line oder lines in between (e.g. line 2+3 of 4).
But if I want to blind out the last line(s), there is a ¶ at the end and a extra blank line with the #.
I know, the # stands for the following hidden Text, but why does it work with the red/green text.
There is also text hidden (green), but the mark # is right after the last word - not in a new line.
Has anyone a solution for this?
Thanks in advance!

That's ok so far. A paragraph sign at the end of a text forces a new line.
To change that do the following:
For every condition you need another condition just for the paragraph sign that comes immediately after the condition. Not after every paragraph of one condition, but at the end of every consecutive numbers of paragraphs of the same condition.
So in your third example you'll need two conditions more:
1. One for the paragraph sign at the end of condition "meaasurements"
2. One for the paragraph sign at the end of condition "price 2"
Whenever you make the other conditions invisible, you also have to turn off the new conditions that only control the paragraph signs.
See the following screenshots:
Uwe

User Defined Fields & Tables Problem

After the upgrade to B1 2007 and converting our database to 2005 compatibility as per the upgrade directions, were having some weird issues with our user defined fields and tables.
Our user defined fields that used to be alpha-numeric when set up in B1 are now in the database as nvarchar(MAX), even after updating the fields in the Manage User Defined Fields screen. B1 is obviously not setting the right field information as per its interface.
Were can no longer add records to user defined tables through the B1 interface, though we can add them fine through SQL Server or an ODBC interface. The error we are getting is
[Microsoft][SQL Native Client][SQL Server]Conversion failed when converting the nvarchar value '-3 @PASSWORDS' to data type int. (CINF)
. I dont understand where this problem is coming from because there isnt even a data field that is an integer, so I dont know what its trying to convert.

Derek,
I would suggest you post this question to SAP Support by creating a message. Also search for any notes on this from https://websmp201.sap-ag.de/notes
Suda

Sep up Tables Problem

Similar Messages

Maybe you are looking for