Separate Dunning Letter for Individual line items
Hi All,
Please let me know if it is possible to produce a separate dunning notice for each individual line item in an invoice.
Thanks,
Naresh
Hi,
1.loop at Line item.
Write_form.
endloop.
2.This will give the seperate dunning letter for each invoice line item.This can be write in the driver pg.
Regards,
Shiva Kumar
Similar Messages
-
Dunning Notice per Individual Line Items.
We have a dunning requirement to print individual dunning notice per line item. In fact, SAP standard form will give support for all open items of respective customer. Recently, we have developed a form in such a way that it will consider only one Open line item and it is picking up fine. But the problem it is generating spool request for only first open line item.
In fact, our requirement to generate Dunning Forms (spool requests) for all other open items as well.
If anybody knows how to generate Dunning Form for Individual Open Items, please let us know.
Please consider the above requirement on top priority basis, try to answer or atleast give clue how to achieve it.
Regards.Hello Sekhar,
I am not sure, but, it is not correct to do Dunning at Individual Line Item level (unlike correspondence).
The reason is that, the Customer Master Data is normally updated once at the end of Dunning Run with the Latest Dunned Date and the appropriate Dunning Level.
If you go for Dunning at individual Item Level, then it is obviously wrong to keep on updating Customer Master.
Hope this info enables you to analyse in the right direction
With Regards
Vijay Gajavalli -
How to restrict separate payment document for each line item in APP
HI Experts
PLs let me know how to restrict separate payment document for each line item in APP
Thanks
Sneha
Edited by: Sneha R on Apr 14, 2009 4:18 PMSneha,
If your query was to group items for payment ,in FBZP co code data for payment method there are 2 options 1.group payment for marked items 2.payment per due date.
Also in the Vendor master there is a flag which will ensure that each item is paid individually,if this is what you were looking for ( FK02 change vendor).
In case you want to group items to be paid together Payment Grouping Key can be assigned in Vendor Master .
Shony -
Different Cost Centers for Different Line Items in a single Reservation
Hello Gurus,
When we create a Material Reservation, we give the cost center at the header level and that cost center is accounted for each of the line items in the reservation. But when the reservation has many line items which depend on different cost centers, there is a need to enter different cost centers for different line items in the same Material Reservation. How can this be done? Please suggest.Hi,
It's a standard restriction in SAP functionality where one reservation document can only accommodate one cost center.
You can not maintain multiple cost centres for individual line items.
You have to create seperate Reservations for each cost centre.
check below thread:
ONE RESERVATION FOR DIFF COST CENTERS
Umakanth R
Edited by: Umakanth R on Dec 8, 2011 7:53 AM -
Header Details to be Printed only for the line item details.
Hi All,
I have the following requirement.
I have Page1 with the Logo, Header Window, Vendor Window, Send Invoice To, Delivere Invoice To and Main Window. Main Window Starts from the middle of the page. In the Page2 i have Logo, Header window and Main Window. In the Page3 i have only Main Window.
In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3.
The requirement is Logo,and Header Window should appear only for the Line items and not for the Terms and conditions.
For the Page1 i have given the Next Page as Page2. Suppose if there is only one line item then it Prints in the first Page itslef and the control flows to the Page2 and since in the page2 i have given the condition for the Logo and header window to print only if line item is more than 1 and since Main Window is starting from the middle there is a blank Space appearing in the start of the page.
The command i have given in the footer to trigger new page that is page3 is not getting triggered. If there are more than one line item then its printing the logo and header window and so there is no blank space appearing and it is working fine.
Please let me know how to avoid this blank space and move my main window to the start of the Page if there is only one line item.
Thank you.Dear Vasudha,
I am a little bit confused regarding your query,
"In the Footer of the Main Window i have Placed the Terms and conditions which should always be Printed in the New Page. So in the footer i have given a command "Go to New Page " and given the page as Page3. "
When you say footer of main window does it mean , that you are using a table inside your main window and the command node your have inserted is in the footer of the table ?.I hope it is, because my suggestion is based on this assumption.
Well my suggestion for your issue is,
1.I hope you are aware we can trigger a next page in two ways, one by setting the next page static attribute & second using the command node which you have used.In your case you will have to use a combination of both.
2.I feel your First page design is ok. Set its static next page attribute to PAGE2. Similarly set the static next page attribute for PAGE2 as PAGE2 itself. This should take care of your table which you have placed in the main window. If the table contains only one lineitem it will get over in the first page itself. If the lineitems are more in the table, it will automatically triggerPAGE2 (since static next page attribute for PAGE1 is PAGE2) and the remaining line items will be displayed. Now no matter how many lineitems you have ,PAGE2 will be triggered repeatedly(since static next page for PAGE2 is PAGE2 itself) until the entire data in your table is displayed.
In this way your requirement of printing the logo and header windows for the data lineitems only will be fulfilled.
3.Now the last catch in your case is the printing of PAGE3(The terms and condition page) on an entirely new blank page.
In the footer section of the table which you have used, use a command node set to PAGE3. After the command node and under the same footer section now insert your terms and condition lineitem.
Also Check the "at End of table" checkbox and uncheck " AT PAGE BREAK" under OUTPUT OPTIONS tab for the footer section.
So now this footer section will be triggered only once after all the data in the table is displayed
4. So now if there is only one lineitem, before the default second page is triggered the command node will trigger the PAGE3 and the terms and condition will be displayed.Else if there are more lineitems the page2 will be triggered again and again and finally when all the lineitems are over, the footer of the table will get triggered. So the command node will take you to the PAGE3 wherin the terms and condition will only be displayed.
Hope this helps.
Regards,
Riju -
Excise duty for some line item of material document is not posted
Dear CIN Exerts,
In my Scenario user is Posting Excise invoice for every GR (105) by J1IEX to generate Excise invoice.
In some Past cases, if there are more then one line item in a GR then Excise value for some material is not showing (May be that time user not Did J1ID (Excise rate maintenance ).
Now the problem is that we wants to post excise Duty for those material WRT material document for whom it was not posted.
Please let me know that how can we do so (excise posting against Material document) so that it get reflected (for those line items for which Excise deuty is not posted) in MIGO > Document Display> Excise items tab .
Regards,
AshutoshExcise posting is not recommended by sap for movements 103 or 105.
Refer or search for SAP notes with subject CIN Limited functionalities. -
How to find out Last Changed Fields for a line item of a PO
Dear All,
Pls let me know is there any FM or procedure to find the last changed fields for each line item of a PO. I should be able to get the details on the basis of Last changed Date. Can u pls guide me in this?Hello,
Check the table CDHDR,CDPOS for PO items,
Check this code:
REPORT ZV_GET_LATEST_SO .
DATA: BEGIN OF ITAB OCCURS 0,
OBJECTCLAS TYPE CDHDR-OBJECTCLAS,
OBJECTID TYPE CDHDR-OBJECTID,
CHANGENR TYPE CDHDR-CHANGENR,
USERNAME TYPE CDHDR-USERNAME,
UDATE TYPE CDHDR-UDATE,
UTIME TYPE CDHDR-UTIME,
TCODE TYPE CDHDR-TCODE,
TABNAME TYPE CDPOS-TABNAME,
TABKEY TYPE CDPOS-TABKEY,
FNAME TYPE CDPOS-FNAME,
CHNGIND TYPE CDPOS-CHNGIND,
END OF ITAB.
TABLES: CDHDR,CDPOS.
DATA: LT_CDHDR LIKE CDHDR OCCURS 0 WITH HEADER LINE,
LT_CDPOS LIKE CDPOS OCCURS 0 WITH HEADER LINE.
*REFRESH AUSG.
CLEAR CDHDR.
CLEAR CDPOS.
CDHDR-OBJECTCLAS = 'EINKBELEG'.
CDHDR-OBJECTID = '0000001784'. " Purchase order number
**SELECT A~OBJECTCLASS A~OBJECTID A~CHANGENR A~USERNAME A~UDATE A~UNAME
**B~TCODE
**B~TABNAME B~TABKEY B~FNAME B~CHNGIND INTO TABLE ITAB FROM CDHDR AS A
**INNER JOIN CDPOS AS B ON A~OBJECTCLASS = B~OBJECTCLASS
** A~OBJECTID = B~OBJECTID
** A~CHANGENR = B~CHANGENR
** WHERE OBJECTCLAS = 'VERKBELEG'
** AND OBJECTID = '0000001784'.
*SELECT * FROM CDPOS INTO TABLE LT_CDPOS WHERE OBJECTCLAS = 'VERKBELEG'
* AND OBJECTID = '0000001784'.
*IF NOT LT_CDPOS[] IS INITIAL.
* SELECT *
* INTO TABLE LT_CDHDR
* FROM CDHDR
* FOR ALL ENTRIES IN LT_CDPOS
* WHERE OBJECTCLAS = LT_CDPOS-OBJECTCLAS
* AND OBJECTID = LT_CDPOS-OBJECTID
* AND CHANGENR = LT_CDPOS-CHANGENR.
*ENDIF.
** SORT ITAB BY OBJECTCLAS ODJECTID DESCENDING.
*LOOP AT ITAB.
* WRITE: ITAB-UDATE."ITAB-UNAME.
*ENDLOOP.
*--- Interne Tabellen -------------------------------------------------
DATA: BEGIN OF ICDSHW OCCURS 50. "Ausgabeaufbereitung
INCLUDE STRUCTURE CDSHW. "Zwischendatei
DATA: END OF ICDSHW.
CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
EXPORTING
DATE_OF_CHANGE = CDHDR-UDATE
OBJECTCLASS = CDHDR-OBJECTCLAS
OBJECTID = CDHDR-OBJECTID
TIME_OF_CHANGE = CDHDR-UTIME
USERNAME = CDHDR-USERNAME
TABLES
I_CDHDR = LT_CDHDR
EXCEPTIONS
NO_POSITION_FOUND = 1
OTHERS = 2.
LOOP AT LT_CDHDR.
CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
EXPORTING
* ARCHIVE_HANDLE = 0
CHANGENUMBER = LT_CDHDR-CHANGENR
* TABLEKEY = '00000000 '
* TABLENAME = ' '
* IMPORTING
* HEADER =
TABLES
EDITPOS = ICDSHW
* EDITPOS_WITH_HEADER =
* EXCEPTIONS
* NO_POSITION_FOUND = 1
* WRONG_ACCESS_TO_ARCHIVE = 2
* OTHERS = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT ICDSHW.
IF ICDSHW-TABKEY+3(10) = '0000001784'
AND ICDSHW-TABKEY+13(6) = '000001'.
ENDIF.
ENDLOOP.
ENDLOOP.
Vasanth -
BDC to create SO(VA01) for multiple line items
Hi all,
My requirement is to create SO for multiple line items in ECC6.0
My recording for VA01 is like this.
start-of-selection.
perform open_group.
perform bdc_dynpro using 'SAPMV45A' '0101'.
perform bdc_field using 'BDC_CURSOR'
'VBAK-AUART'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBAK-AUART'
'ZOR'.
perform bdc_field using 'VBAK-VKORG'
'2000'.
perform bdc_field using 'VBAK-VTWEG'
'10'.
perform bdc_field using 'VBAK-SPART'
'05'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(01)'.
perform bdc_field using 'RV45A-MABNR(01)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(01)'
' 10'.
perform bdc_field using 'RV45A-KWMENG(01)'
' 55'.
perform bdc_field using 'VBAP-WERKS(01)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.2'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1200'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(05)'
'26.4'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-WERKS(02)'.
perform bdc_field using 'RV45A-MABNR(02)'
'hrpocf'.
perform bdc_field using 'VBAP-POSNR(02)'
' 11'.
perform bdc_field using 'RV45A-KWMENG(02)'
' 66'.
perform bdc_field using 'VBAP-WERKS(02)'
'2010'.
perform bdc_dynpro using 'SAPLCEI0' '0109'.
perform bdc_field using 'BDC_CURSOR'
'RCTMS-MWERT(06)'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'RCTMS-MNAME(01)'
'A_THICK_MM'.
perform bdc_field using 'RCTMS-MNAME(02)'
'A_WIDTH_MM'.
perform bdc_field using 'RCTMS-MNAME(03)'
'A_EQUIVALENT_SPEC'.
perform bdc_field using 'RCTMS-MNAME(04)'
'A_BATCH_WEIGHT_MAX_SI'.
perform bdc_field using 'RCTMS-MNAME(05)'
'A_BATCH_WEIGHT_MIN_SI'.
perform bdc_field using 'RCTMS-MNAME(06)'
'A_COIL_INNER_DIA_MM'.
perform bdc_field using 'RCTMS-MWERT(01)'
'3.1'.
perform bdc_field using 'RCTMS-MWERT(02)'
'1250'.
perform bdc_field using 'RCTMS-MWERT(03)'
'IS_11513_GR_D_1985'.
perform bdc_field using 'RCTMS-MWERT(04)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(05)'
'20.084'.
perform bdc_field using 'RCTMS-MWERT(06)'
'610'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(01)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(01)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'FDGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=PDE3'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSNR(02)'.
perform bdc_field using 'RV45A-VBAP_SELKZ(02)'
'X'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAP-TAXM1'
'1'.
perform bdc_field using 'VBAP-TAXM2'
'1'.
perform bdc_field using 'VBAP-TAXM3'
'0'.
perform bdc_field using 'VBAP-TAXM4'
'0'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'GFGFDG'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'=T\10'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-POSEX_E'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'000005'.
perform bdc_dynpro using 'SAPMV45A' '4003'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'VBAP-POSEX'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'VBAP-POSEX'
'108128'.
perform bdc_field using 'VBKD-BSTKD_E'
'3011192'.
perform bdc_field using 'VBKD-POSEX_E'
'5'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=KKAU'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai east'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\02'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-KONDA'.
perform bdc_field using 'VBAK-AUDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-VKBUR'
'IN15'.
perform bdc_field using 'VBAK-WAERK'
'INR'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-KDGRP'
'CF'.
perform bdc_field using 'VBKD-PLTYP'
'01'.
perform bdc_field using 'VBKD-KONDA'
'01'.
perform bdc_field using 'VBKD-BZIRK'
'NORTH'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\03'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-VSART'.
perform bdc_field using 'VBAK-VSBED'
'01'.
perform bdc_field using 'VBKD-KZAZU'
'X'.
perform bdc_field using 'VBKD-VSART'
'ER'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\05'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-INCO2'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'VBKD-FKDAT'
'29.01.2008'.
perform bdc_field using 'VBAK-TAXK1'
'1'.
perform bdc_field using 'VBAK-TAXK3'
'l'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\09'.
perform bdc_field using 'BDC_CURSOR'
'VBKD-ZLSCH'.
perform bdc_field using 'VBKD-KTGRD'
'01'.
perform bdc_field using 'VBKD-ZLSCH'
'c'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DELETE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_CREATE'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=TP_DETAIL'.
perform bdc_field using 'LV70T-SPRAS'
'EN'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXVB'.
perform bdc_field using 'RSTXT-TXLINE(02)'
'BDFBFDB'.
perform bdc_dynpro using 'SAPLSTXX' '1100'.
perform bdc_field using 'BDC_CURSOR'
'RSTXT-TXLINE(02)'.
perform bdc_field using 'BDC_OKCODE'
'=TXBA'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=T\11'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'=KSTC'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(02)'.
perform bdc_field using 'J_STMAINT-ANWS(01)'
perform bdc_field using 'J_STMAINT-ANWS(02)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(03)'.
perform bdc_field using 'J_STMAINT-ANWS(02)'
perform bdc_field using 'J_STMAINT-ANWS(03)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'J_STMAINT-ANWS(04)'.
perform bdc_field using 'J_STMAINT-ANWS(03)'
perform bdc_field using 'J_STMAINT-ANWS(04)'
'X'.
perform bdc_dynpro using 'SAPLBSVA' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=BACK'.
perform bdc_field using 'BDC_CURSOR'
'JOSTD-OBJNR'.
perform bdc_dynpro using 'SAPMV45A' '4002'.
perform bdc_field using 'BDC_OKCODE'
'/EBACK'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-TXT_VBELN'.
perform bdc_dynpro using 'SAPMV45A' '4001'.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
perform bdc_field using 'VBKD-BSTKD'
'open SO'.
perform bdc_field using 'VBKD-BSTDK'
'29.01.2008'.
perform bdc_field using 'KUAGV-KUNNR'
'100000'.
perform bdc_field using 'KUWEV-KUNNR'
'100000'.
perform bdc_field using 'RV45A-KETDAT'
'29.01.2008'.
perform bdc_field using 'RV45A-KPRGBZ'
'D'.
perform bdc_field using 'VBKD-PRSDT'
'29.01.2008'.
perform bdc_field using 'VBKD-INCO1'
'EXW'.
perform bdc_field using 'VBKD-INCO2'
'mumbai'.
perform bdc_field using 'VBKD-ZTERM'
'0001'.
perform bdc_field using 'BDC_CURSOR'
'RV45A-MABNR(01)'.
perform bdc_transaction using 'VA01'.
perform close_group.
if in excel file one row of records means i am succesfully creating SO.
But for multiple i am not getting idea to create SO.
My excel file details like this.In this excel file based on VBKD-BSTKD_E value i have to keep the records in line items.
VBAK-AUART :Order Type
VBAK-VKORG : Sales Org
VBAK-VTWEG : Distri Channel
VBAK-SPART : Division
VBAK-KUNNR : Sold-to-Party
VBPA-KUNNAR : Ship-to-Party
VBAK-BSTNK : PO No
VBAK-BSTDK : PO Date
VBAP-MATNR : Material No
A_THICK_MM
A_WIDTH_MM
A_EQUIVALENT_SPEC
A_COIL_INNER_DIA_MM
A_BATCH_WEIGHT_MIN_SI
A_BATCH_WEIGHT_MAX_SI
VBAP-KWMENG : Qty
VBAP-WERKS : Delivery Plant
VBKD-INCO2 : Incoterm2
VBKD-KONDA : Price Group
VBKD-VSART : Shipping Type
VBAK-TAXK1 : Cust Tax-1
VBAK-TAXK2 : Cust Tax-2
VBAK-TAXK3 : Cust Tax-3
VBAK-TAXK4 : Cust Tax-4
VBKD-ZLSCH : Payment Method
VBAP-TAXM1 : Mat tax clss-1
VBAP-TAXM2 : Mat tax clss-2
VBAP-TAXM3 : Mat tax clss-3
VBAP-TAXM4 : Mat tax clss-4
VBAP-POSEX : IMPS Order No
VBKD-BSTKD_E : old SO in 4.6c
VBKD-POSEX_E : old SO Item in 4.6c
Text Id : TDC No
Text Id-ES10 : Special Inst(Unld const & Veh)
ZOR,2000,10,5,100000,100000,PO NO 125,19.01.2008,HRPOCF,3.1,1200,IS_11513_GR_D_1985,610,20.084,20.084
51,2010,Mumbai,01Freight-pre paid,ER,2,0,L,0,c,1,1,0,0,108128,3011192, 1,PO 444 AMD 1,Spl Inst
based on VBKD-BSTKD_E line items has to create.
if VBKD-BSTKD_E = 3011192 is like 4 records in excel means for these 4 should be one SO
if it is changed to 3011193 then only different SO.
PLs If any one knows solution pls write some sample code for me.
If u send that code to my mail id also very thankful.
[email protected]
Pls help me this is urgent requirement.
Thanks & Regards,
J.LokeshHI,
Instead of using BDC , why dont you make use of BAPI.
As you are on ECC, you can make use of BAPI BAPI_SALESORDER_CREATEFROMDAT2
Collect all your records based on PO # and pass them into line item table structure ORDER_ITEMS_IN.
*--Logic something like this.
loop at it_exceldata into l_line.
loop at it_exceldata into l_so where bstkd_e eq l_line-bstkd.
*This will loop at all the same PO#
*collect the data related into corr tables. and append
endloop.
*Now you are outside the loop.
*Call the BAPI to update this SO
delete it_exceldata where bstkd_e eq l_line-bstkd_e.
endloop.
Also pass all the necessary data to header structure ORDER_HEADER_IN
Do not check for Sy-subrc at the end of execution.
Instead read the Return table with message type 'A' or 'E whichi means there is an error/abort in BAPI execution.
Remember to expicitly COMMIT_WORK after succesfull execution of BAPI using BAPI_TRANSACTION_COMMIT
Please let me know , if you need more help in this
Gary. -
Confirmations report for PO line items.
Hi All,
I have a PO which contains one sinlge line item and have put the confirmation contrl.ket as 0001/Z001 and Confrimation control as LA. we have created some 10 confirmations schedules on different dates with different qty.Inbound delivery has not yet created in the system for this line item.
Now i would like to see these 10 schedule line confirmations in the report i tried with EKES it displays but i need some T codes which can show this report.Please let me know if any one has any idea of this or else we need to develop the program ? if yes tehn tell me wat are all teh tables we need to consider / join.
Thanks,
JohnHi Prashant,
I need the T code not the table.
thanks for your reply. -
hi,
when i post the document in migo using 311 movement type i am getting separate Tr for each line item,but i need single TR all line items , how to solve the issue.
Thanks
Muthuraman.Dhi,
thx for your answers but user mistakenly put into different movement types for each line item so different TR is created...now the problem solved.
thanks
Muthuraman.D -
Fi document: different tax code for each line item
Dear All,
Our FI department needs to post FI documents by uploading the list of line items. For each line item (even when they have the same g/l account) tax code may be different from 0 to 10%. Also the tax code needs to be entered in EUR not in %. So for example they may need to post the folowing document:
PstKey Account Amount Tax amt
001 21 Vendor 95 EUR Tax amount 5 EUR
002 50 GRIR 100 EUR
003 21 Vendor 90 EUR Tax amount 10 EUR
004 50 GRIR 100 EUR
At the moment users have to post it manually. Tax rate cannot be restricted to allow tax from 0 to 10%.
Can you please advice what would be the best approach for them to make it? Providing they do want to upload the document not enter the items manually..
Thanks a lot in advance for your help!Hi,
are there some messages during this process? Upload this list in foreground batch input execution. Verify if in stop point displays any messagem. If it is the case, go to OBA5 to change its status.
Let me know results.
regards -
Payment terms for particular line item
Hi gurus
i have defined payment terms and assigned to customer master, when ever i am creating sales order payment terms are getting in the sales order if i want to change the payment terms for particular line item what is need to be done
please let me know asap
thanks n regards
srinviasHi,
There are few ways:
- You need to check in respective Item Category, the field "Business Item data" should be unchecked, this will allow you to change the Payment Terms at Item Level.
-Even if the above settings are not being done, you can have the Payment terms fetched from Condition record maintained for that item. Mind that you need to maintain the Payment terms in Condition Records of the pricing of the item.
Do reward answers with suitable points.
Regards
SD -
Foreign trade data is incomplete for the line item eg 70!
Dear Sapients,
I have encountered an issue related to invoice while releasing it to accouting.
The invoice is done for several line items but the problem is faced for one line item only, could any one suggest the possible solution please.
Regards.
Kodalihi
Read the following SAP note. This can also be the case.
Note 354222 - Foreign trade data incomplete for domestic business
Symptom
A billing document cannot be transferred into accounting because the foreign trade data is incomplete.
However, the underlying business process is a domestic business!
Additional key words
VF01, VF02, EIPO, EIKP, foreign trade, incompleteness, domestic, delivery, billing document, EXNUM, EXPKZ,export indicator, export number
Cause and prerequisites
In the respective delivery or in the billing document, for domestic business you by mistake go to the foreign trade data into a field. Since the incompletion log requires at least one entry for foreign trade, you must fill one field in order to be able to leave the foreign trade data again without canceling document processing.
Here, an export indicator and an export number is assigned which cause the incompleteness of the whole document due to missing export data.
Solution
A solution in the standard system is currently not planned since because of various customer requests the foreign trade data in the delivery should be accessed and maintained for domestic business too. An example is the inbound delivery in a bonded warehouse where the forwarding agent should get information already in advance.
To avoid incorrect billing documents, proceed as follows:
Copy data transport routine 001 to a routine 601 and enhance the new routine according to the attached correction instruction (RV60C601). Store this new data transport routine in Customizing for the copying control for billing documents for the processes you use, for example
F2 - LF, item category TAN. (delivery-related)
If you already use an own data transport routine, in this data transport routine include the attached source code.
You must cancel existing billing documents and then create them again.
If you do not want to cancel existing documents, implement the attached correction (program RV60AFZZ) and release the documents either individually (VF02, default transaction) or via the list of blocked billing documents (VFX3).
After you completed the correction, you should cancel this solution (RV60AFZZ) again.
Also refer to the attached Note 170183.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 16.02.2005 17:15:20
Priority: Recommendations/additional info
Category: Consulting
Primary Component: SD-BIL-GF Basic Functions
Secondary Components: SD-FT-PRO Basic Functions
SD-BIL-CA Account Assignment -
Changing Ship-To Parties for Multiple Line Items
Hello! I am wondering if there is a way to change the Ship-To party on a sales order at the line item, besides changing each line individually. Is there a more efficient way to change the Ship-To party for multiple line items? We are looking at creating a fast-change transaction to allow users to change the Ship-To party at the line item level for multiple lines. Our particular transaction will make changes by delivery group. Does anyone know if SAP version 6.0 will have functionality to allow users to change the Ship-To party for multiple lines at one time? Thanks!
HI ,
Go to tcode MASS, enter the object BUS2032, then execte-enter, now select the mass odrer item data. Here u can change the req fields.
cheers
reward if helpful -
Can it not possible that i can retrive it for all line items in a single qu
I have to make report for my application in which I am facing a following problem:
In the application there are multiple suppliers and each supplier having multiple line items and each item having multipale events. each evant having three status GREEN,RED and BLUE.
When a user select 'all suppliers' to show the the status time span for a supplier (i.e. for a supplier how many parts and upto how much time parts are in blue, red and green status)
to show the cumulative status time span I have to find out a event for each line item which is having nearest lower entry time from the lower part of the given time span.for this i have write following query
SELECT * FROM parts_events
WHERE vendorid = ? AND partid = ?
AND visible = 'visible' AND active = 1
AND entrytime = (SELECT MAX(entrytime) as
entrytime from parts_events
WHERE vendorid = ?
AND partid = ?
AND entrytime < ?
AND visible = 'visible'
AND active = 1)
the problem is that i have to fire this query for each line item, can it not possible that i can retrive it for all line items in a single query?maybe if you can post some sample data and output will help us analyze more youre requirement.
Maybe you are looking for
-
Need to add ASSET field in Gl A/c Tab in MIR7 txn
Hi Req : Exit or Badi Transaction MIR7 Invoice parking Asset field is in PO refernce Tab , my requirement is to add the same ( Asset field ) in G/L Account Tab and write the validation . Kindly let me know...if any Exit or Badi could be used
-
I cant seem to get my custom module template to work, here is the tag that is set up to pull in a random item from a set category, I then add the template url like it said to do but nothing is working, it just uses the default template, any ideas? {m
-
Good afternoon! I designed a japplet to login. I have 2 labels(username , password)a 2 textes for them ,2 buttons(submit,clear)and 1 label below where i will put the message("correct username" or" uncorrect username").I have make a jdbc:odbc connecti
-
I DONT GOT H.264 AS A OPTION! HELP ME!
Hey! i dont have h.264 as a option on the output format. I got Adobe after effects cs4 full version! Please reply fast!!!
-
Is installation on 2.16 GHz Intel Core Duo (MacBook Pro)really not possible and why?
I would like to buy OS X Lion and install it on my MacBook Pro with 2.16 GHz Intel Core Duo, but this processor is not in the list of the specifications (Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7 or Xeon processor). Is it reall