Separate frame by frame

I'm looking for a software that allows to separate the movies frame by frame, can somebody tell me if it's possible with Final Cut and, if yes, how to proceed with the separation.
Suggestions for other software is also very appreciated!
Thanks to all!!

...and in the FCPX project itself?
To explain: I've to separate frame by frame, then cancel every 2nd frame and substitute the frames cancelled with other frames from another clip....I know, it's a bit complicated to explain, but the goal is to create a 3D clip...Thanks again for your precious help!! Take care!
jerry

Similar Messages

  • I Can't separate text in frames from repeating

    CS4 Flash Pro v:10.0.2
    Win 7 Pro
    I have been working on a Flash site for a while - and learning quite a bit over the past 2 years.  This is my first Flash design website and I can't see where I went wrong.
    At some point last year I removed subsequent frames and began duplicating the text to show symetry.  Now, my customer wants to add different information in the adjacent frames, but I can't remove the adjacent duplications.
    Example: 
    Frame 6 has text-A (Sample X in the PDF Image below)
    Frame 7 has text-A (Sample Y in the PDF Image below)
    Now I want Frames 6 and 7 to have different text - unlinked in all frames, and the final tween frame.
    When I edit either of the 8 Frames contents, the text changes for the adjacent frames.  Luckily, the first 2 tweens contain separate information, so those are not linked to these last 2 (Sampe X and Y).  How do I separate the frames so I can have different information, but I do want each Sample to contain the same text?  I DO NOT want Sample X and Sample Y to mimic each other.  Each tween is 4 frames in length, and each frame is duplicated.  However, I want Sample X separate from Sample Y.

    Rob,  thanks for the promt response.
    My example image identifies Sample X and Y as my current work.  What I am referring to is that the text inside the movie clip of Sample X and Sample Y are identical.  When I edit the text/content in the Movie Clip for Samply Y, it changes the text in X automatically.  I want them to be separated, so the content in each movie clip is different.
    If you visit the website http://www.playonkc.com/ and select Training, you can see the content.  When you click on the + bubbles on the right, if pulls up each months training.
    Somehow my .fla file contains linked months.  So inside each movie clip, the text for months July/August & Sept/Nov are linked.  When i edit the contents of one, the other changes.  How do I separate them, so they are independent of each other like Feb/Mar & May/June.
    It has to be either a Key Frame, or Frame edit, but when I just change the text contents of one frame, Flash automatically changes the text contents of the other Movie Clip (Sample X and Y below.)  They are linked together somehow....

  • How to make separate/individual text frame from one parent frame in indesign with javascript

    Hi all,
    Please suugest - how to make separate/individual text frame from one parent frame in indesign with javascript.
    Thanks
    Rohit

    @Larry – ah, your interpretation could be the right one…
    May I rephrase the question:
    "How to split threaded text frames to single ones?"
    "SplitStory.jsx" or "BreakFrame.jsx" under Scripts/Samples indeed could be the answer.
    From the comments in the code of "BreakFrame.jsx":
    //Removes the selected text frame (or text frames) from the
    //story containing the text frame and removes the text contained
    //by the text frame from the story.
    //If you want to split *all* of the text fames in the story, use the
    //SplitStory.jsx script.
    Uwe

  • Separate frame by frame in iMovie

    I need to create a 3d video on iMovie.
    To do this I have to separate the movie frame by frame. In the older version it was easily possible, with iMovie 9 I can't find any option to do so.
    Could someone give me some tips&trics?
    Thanks in advance!!

    ...and in the FCPX project itself?
    To explain: I've to separate frame by frame, then cancel every 2nd frame and substitute the frames cancelled with other frames from another clip....I know, it's a bit complicated to explain, but the goal is to create a 3D clip...Thanks again for your precious help!! Take care!
    jerry

  • How do I go frame to frame after a few seconds?

    Hello,
    I'm new here so forgive any mistakes or lack of knowledge.
    (Brief history: I have programmed in Pascal before, currently learning Java and Flash)
    So my question is i want to be able to move from frame to frame after X amount of seconds. I have searched online for coding on how to do this with the action script and managed to get the first frame working. The problem occurs with my 5th frame as frame 1 goes to frame 5 in 5 seconds but when i want frame 5 to go to frame 10 in 10 seconds it decides not to work.
    Below is the code i used in order to accomplish the first frame:
    stop();
    var myTimer:Timer = new Timer(5000, 1);
              myTimer.start();
        myTimer.addEventListener(TimerEvent.TIMER_COMPLETE, function(e:TimerEvent)
            play();
    If there is a problem with the code or if there is an alternative way for better practice please do let me know.
    My 5th frame code:
    stop();
    var myTimer2:Timer = new Timer(5000, 1);
      myTimer2.start();
        myTimer2.addEventListener(TimerEvent.TIMER_COMPLETE, function(e:TimerEvent)
            play();
    Thanks in advance. If anyone is struggling to understand my question, apologies because i am really bad when it comes to structuring sentences.

    You should not have to create more than one timer for this.  Also, you should not be building the event handler function into the listener, keep it as a separate function.
    In frame 1 you could have...
         stop();
         var myTimer:Timer = new Timer(5000, 1);
         myTimer.start();
         myTimer.addEventListener(TimerEvent.TIMER_COMPLETE, moveOn);
         function moveOn(e:TimerEvent):void {
               play();
    and all you would need in frame 5 would be....
         stop();
         myTimer.start();

  • Frame in frame with graphics problem-or maybe not

    Hi from Croatia.
    Well I have and extremely demanding costumer that wants to control every single bit of the project.
    The problem is as follows.
    I have a book that every once in a wile has annotation which above and bellow has a graphic line (not simple line but complex graphic imported from illustrator.)
    I tried to anchor one object above and another bellow this text which lets say stands in the middle of text frame and for me everything works ok.
    But this demanding customer wants that those annotations are in separate frame so that he can have full control over them(?).
    So I made frame in frame-put wrapping around this smaller frame.
    The problem is- is it possible to put those graphics in this smaller frame, create text object and add it to library so that i can use it multiple times. I have more than hundred of those annotations.
    And is it possible when i cut the text from this main frame to paste it in this smaller one and that this small frame automatically fills with text so that frame expands vertically according with amount of text. I am not placing text but pasting. I hope you have understood but in every case here is an example.
    Main text frame(text fills full width of page)
    sadbhjasdsdab
    sagsafgsfgafsd
    agsfgfasg
    (Now smaller frame with graphic fills full width of main frame)
    ewfewtf
    agasg
    sdagasdga
    (text fom main frame continues)
    fasdfs
    dsgasgasg
    dfgdfsg
    dfsgsd
    Uf this was exhausting even for me.
    THX for any help.

    I tried to use 3 row table with header and footer, but the problem is that indesign does not allow tables to break when the part of table goes to another page.
    And THX for in for on those plugins.

  • Photo shop and frame by frame touch up

    Hi Group:
    I am using FCP and would like to touch about about 5 seconds of video using photo shop. Can anyone outline the steps.
    I have done the following>
    Open Photo shop.
    Click import (Frame by frame)
    Select the video from the browser
    picked a frame and made changes
    this is where I get stuck ...........how do I save it so that the frame gets saved directly in the video. As opposed to a still frame that is kept separate from the video?
    What is the most efficient way to do touch up in photo shop?
    JIm

    Once you import a frame of video into Photoshop, it is no longer video, but a still image. The method I'm familiar with is to set an IN and OUT point in FCP's Timeline for the portion of the clip that you need to touch up. Next, export that section as an Image Sequence. Specify the file type and other options (use a non-compressed format for best results - not jpg), then export to the location you specify. Open the images in Photoshop and do the touch up work. If there isn't much movement from image to image, you may be able to record actions to automate some of the work.
    When you're done in Photoshop, launch FCP and set the Still Image Duration in FCP's preferences to 1 frame. Import the folder containing the image sequence. Place the Timeline playhead where the images need to start. Set the Target track and drag the entire folder to the Timeline.
    -DH

  • Can Imovie9 do frame by frame editing?

    I need to separate individual frames in editing. Using a cursor is just not accurate enough.

    Let me add, that of the issue is setting in and out points at the frame level, go into iMovie/Preferences and make sure there is a check mark in the box next to "Display Time as HH:MM:SS:Frames
    It also helps to select VIEW/PLAYHEAD INFO.
    Depending on what you are doing, it may also help to move the thumbnail slider in the Project Pane and/or the Events Pane to 1/2 second.
    Also, when you click on a clip in the project that has more (or less) frames available in the EVENT, you can add frames one at a time by clicking on the little arrow icons at the botton left and bottom right of the clip. A precise handle will pop out that makes it easy to adjust frame by frame, and you see it in the viewer.
    That gets me 99% of what I need, but if you need more, there is the Precision Editor, which you get by clicking Window/Precision Editor (or Command/)
    Message was edited by: AppleMan1958

  • Export frame by frame from FCP/QT film, to print. How?

    Hi,
    I´ve FCP/QT exported films and need to export them as frame by frame files at the highest quality possible (.jpeg or even better .tiff?) to chose some frames and use them as stills to print on offset with 300 ppi resolution, etc.
    As an example, I usualy do this with Acrobat, from a pdf and export an entire pdf into separate jpgs.
    Now I need to to the same but from a FCP/QT film.
    Is it possible? How? With FCP? Or another software?
    Thanks very much.

    To clarify what Jerry said. Video has just pixels - not DPI. Think about it for a second. A DV image displayed on a 13" CRT screen has exactly the same number of pixels as the image displayed on your 50" HDTV. How can DPI have any meaning?
    So, it you are exporting still images from a 4:3 DV sequence, you are dealing with 720x480 non square pixels (which equals 640x480 square pixels) . When you go into the print world, an image based on those square pixel dimensions would translate into an image ~2.13 inches x 1.6 inches at 300 dpi.
    x

  • Variable Speed and/or Frame-by-Frame Video playback with Waveform synchronization

    I'm using Diadem 2011 to view data recorded in a LabVIEW Module that we have written.  The function of our LabVIEW module is to simultaneously capture video from two infrared cameras and 8 channels of waveform data from a DAQ and record this data to disk.  Data is recorded as two separate AVI files (compressed) and a TDMS file (using TDMS logging).  Using Diadem, I use the video synchronization function to view the TDMS data and video files.  I can scroll a cursor in the waveform data panel and view the video corresponding to the time selected.
    I am looking for two features from Diadem that I am not sure are present: 1) A way to vary the playback speed from real-time.  2) A way to advance the video in a frame-by-frame manner.  If anyone has any suggestions on how I might implement this in Diadem 2011 or can verify that these features are present, I would very much like to know.
    Thanks in advance.
    Solved!
    Go to Solution.

    Hello Resaebiunne,
    All the functions you are looking for are available in the VIEW toolbar.
    For the frame reverse/forward functions, please make sure that the section with the video inside is highlighted and then use these two buttons. The "Cursor Parameters" icon let's you change the playback speed.
    Hope that helps,
         Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

  • Frame by frame animation not looping

    Hello,
    This seems so simple but it's not working - I have two frames I want to continuously loop, they are of a person walking. I have put sym.play(0); at the end of the symbol timeline, but it is not looping. The sym.play(0); command is definitely working as I tested it with another transition in the same symbol, and this did loop. Can you not loop frame by frame animation?
    Anyone got any ideas?
    Cheers

    Hi Darrell
    Thanks for your reply, sorry can't really post it as it's a commercial project. They are 2 separate images, which become visible / hidden alternately to show each one after the other.
    I've sort of solved my problem by just repeating this manually for now but would still be interested to know if looping is possible - however appreciate this may be tricky without the file.
    Cheers
    Sarah

  • Hello, 2 questionss here is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

    Hello, 2 questionss here>is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

    Hello, 2 questionss here>is it possible or is there a way to convert all object s outlines in all frames to fills at once and not frame by frame? and why sometimes erases the outline instead of converting it to fill?

  • HELP!  How can I view a clip frame by frame in final cut pro?

    Hi, does anyone out there know how to view a clip in final cut pro frame by frame. I don't really want to use the jogging function as you cannot see each individual frame just all the frames snapped together. Any help would be much appreciated. Thanks.

    http://discussions.apple.com/thread.jspa?threadID=1304742&tstart=0
    It is really time to open the manuals, do the tutorials, and learn the basics of how this application works. You'll be amazed at what you learn it can do!
    Shane

  • How to do frame-by-frame editing in iMovie 08 and export in H264?

    I wish to edit some videos and then export them in H264 so I can use them on a website.
    I have tried to edit with iMovie 08 but can only edit second-by-second. I want to edit frame-by-frame ie to the millisecond. And it appears that iMovie 08 does not export in H264.
    I have looked at iMovie 11 which has a Precision Editor which would work to edit as I want but for that I would have to upgrade from Leopard to Snow Leopard which I don't want. It would export H264.
    I also have QuickTime Player 7 Pro but that too seems to edit only by the second not by the frame; it does however seem to produce H264
    How can I edit these videos precisely and produce H264? Is there another application which would work better (and doesn't cost a fortune).
    Thanks for any ideas

    iMovie exports in h.264 by default. All the presets are h.264 (except Tiny).
    If you need to adjust the h.264 in some way, then SHARE.EXPORT USING QUICKTIME.
    To edit to the nearest frame, Go to iMovie/Preferences and select Display Time Codes.

  • How to edit videos frame-by-frame and export in H264?

    I wish to edit some videos and then export them in H264 so I can use them on a website.
    I have tried to edit with iMovie 08 but can only edit second-by-second. I want to edit frame-by-frame ie to the millisecond. And it appears that iMovie 08 does not export in H264.
    I have looked at iMovie 11 which has a Precision Editor which would work to edit as I want but for that I would have to upgrade from Leopard to Snow Leopard which I don't want. It would export H264.
    I also have QuickTime Player 7 Pro but that too seems to edit only by the second not by the frame; it does however seem to produce H264
    How can I edit these videos precisely and produce H264? Is there another application which would work better (and doesn't cost a fortune).
    Thanks for any ideas

    I want to edit frame-by-frame ie to the millisecond.
    Am a bit confused by what you say. iMovie and QT 7 Pro are both "frame" level editors. However, some forms of editing are, by their very nature, applied over a range of frames which may be a part of your problem. In addition, since "normal" movies have frames which are spaced apart in the 16 to 42 ms range, your requirement to be able to edit to the nearest millisecond would seem unreasonable and would probably be unsupported for playback purposes without skipping 90+ percent of the frames on most platforms.
    And it appears that iMovie 08 does not export in H264.
    All of the "Share" and/or "Export" options (except Final Cut XML...) either default to H.264 or allow export to H.264 (or X264 if installed) video compression.
    How can I edit these videos precisely and produce H264? Is there another application which would work better (and doesn't cost a fortune).
    Difficult to say since you have not given any indication as to what you mean by "editing" here. You could, for instance, edit normal movie clips in a normal manner and then use an application like the JES Deinterlacer to change the playback time reference to achieve an effective 1 millisecond/frame playback rate you seem to want to target even though your platform cannot play every frame during playback.

Maybe you are looking for