Separate withholding tax account in non-extended withholding tax country?

We have one withholding tax GL account defined for our operating CoA, except for India (which has extended withholding tax configured). I now have a request from Italy to assign their withholding taxes to a different GL account, for ONE tax code and ONE vendor. Is this possible to set up, and if so, how?
Thank you!

Dear all,
You should create Your WT type and WT code to the IT country and then to link the WT type to the specific G/L account for Italy (that You created by FS02) by transaction OBWW. then You have to link WT type and code to Your vendor master data by FK02.
Remember also to define the WT type at Company code level with a validity period.
Please test.
I hope this helps You.
Thanks.
Mauri

Similar Messages

Error in added withholding tax code in XK02-extended withholding tax

dear all,
I've just activate extended withholding tax using invoice posting.
When I want to add withholding tax code in vendor master data XK02 it appear error that tax code I've input does not exist in table T059Z, because it read country value "ID" beside the tax code.
For example I've create tax code L1 in country ID, and add L1 in XK02, the error appear 'Entry 'ID L1' does not exist in T059Z.'
Does anyone ever experience the same error?

Hi Oscar,
i would like to know whether the company and the vendor are both in country ID.
if that is the case, just check in "Check Withholding Tax Countries" whether the country has been included.
and also assign the WHT type to your co code in"Assign Withholding Tax Types to Company Codes".
define the WHT type first and then WHT code.
this should solve your problem. if not, kindly revert.
*award points if this helps*
Regards,
CA. Karthik Narayan N S
SAP-FICO Consultant

Extended withholding tax - US Error 7Q 301 updating withholding tax

Cannot get the system to allow me to change the withholding tax information on the accounting documents. Extended withholding tax has been configured. The fields in the line items have been opened to allow changes to the withholding tax data, both for K and S. The venodor has been updated for the withholding tax type and code. Program RFWT0010 does not update any records. The funny thing is it works in the sandbox but not the regular testing dev client. I have compared config and it is the same in both places. Any ideas?
Thank you.

Hi,
Please refer to note 363650, you will see the following information;
C) Change Rules for classical and extended withholding tax If the withholding tax base amount should be changed after a
docment has been paid already, the following steps are required:
For Classical Withholding Tax and only if the withholding tax amount is zero.
Change of withholding tax base amount or withholding tax code of a cleared invoice.
If the withholding tax base amount and/or the withholding tax code needs to be changed after an invoice has been cleared please follow steps;
As you see from the above information the following quotation "only if the withholding tax amount is zero". Is this the case in your scenario?
If a withholding tax amount other than zero has been posted, you cannot change the values via transaction FB02.
Please also review the IMG documentation for transaction OB32 via spro -> Financial accounting -> Financial accounting global settings -> Document -> Line item -> Document change rules, line item. here you will see the following information;
Document Change Rules, Line Item
In this activity, you determine under which circumstances fields within posted documents can be changed.
Note
For a number of fields, the system itself determines that they can no longer be changed after posting. This includes all fields which are central to the principles of orderly accounting, for example, the amount posted and the account.
The system also prevents the update objects from being changed in documents which have already been posted, independent of the document change rules
Thus as you can see from the above description if an amount has been posted to the account you cannot change the fields despite entering in the field in OB32 as changable.
Please also be aware that the important table concerning extended withholding tax is WITH_ITEM. This is where the data found through the button 'Withholding tax Information' in FB03 is held.
(For example in the 'Withholding tax data button' If you click on the help of the field Withholding Code and select the button 'Technical information' you will see that the field name is WT_WITHCD) The fields concerned with same
WITH_ITEM-WT_QSSHB
WITH_ITEM-WT_WITHCD
should be customized in the document change rules (transaction OB32) You will also have to ensure that the posting keys in the document are set to optional (transaction ob41)
Regards
Ravinagh Boni

Classic Withholding Tax and Extended Withholding Tax

Hi,
What is the difference between Classic Withholding Tax and Extended Withholding Tax.
Regards
RKG.

Hi
Withholding tax is calculated and posted to the appropriate withholding tax accounts at different stages, depending on the legal requirements in each country. As a rule, withholding tax is posted at the same time that the payment is posted, in other words the outgoing payment (Accounts Payable) or incoming payment (Accounts Receivable), is reduced by the withholding tax amount.
In certain countries, such as Brazil, the Philippines, and Spain, withholding tax can or must be posted when the invoice is posted. This means that the amount receivable or payable is reduced by the withholding tax amount.
Extended withholding tax supports both concepts.
The key concept in extended withholding tax is the distinction between withholding tax type and withholding tax code. While withholding tax types represent basic calculation rules, specific features of these rules - in particular the percentage rate -
are represented by the withholding tax code. You can define any number of withholding tax codes for a given withholding tax type.
If a particular transaction requires more than one kind of withholding tax, this is covered in the SAP System by defining more than one withholding tax type.
When entering a line item, you can enter withholding tax data for each of these withholding tax types.
How To Configure Withholding Tax?
Steps for extended withholding tax :
1. Check withholding tax countries
2. Define Ex. Withholding tax types for invoice postings
3. Define Ex. Withholding tax codes
4. Formula for Ex. Withholding tax calculation
5. Assign Ex. Withholding tax types to Company code
6. Activate Ex. Withholding tax
8. Create a G/L a/C for Ex. Withholding tax
9. Define A/C for Ex. Withholding tax (DBWW)
10. Make changes in Vendor master (XK02)
11. Maintain Company Code Settings:
Path: IMG -> Logistic -> General -> Taxes on goods movement -> India -> Maintain company code settings
12. Activate country version for specific fiscal year position
Path: IMG -> FA -> -> **** -> Taxes on sales purchases -> Basic Setting -> India -> Activate country specific for fiscal year position
http://help.sap.com/saphelp_erp2005/helpdata/en/e5/0780914acd11d182b90000e829fbfe/content.htm
nagesh

Tax Accounts - Is it necessary to have separate tax acct. for each state

I am new at this:
Is it necessary to have separate AR/AP/ account for each tax jurisdiction like state county etc?\
Or do the sales tax reports for payments in SAP produce outstanding taxes per jurisdiction.
I would prefer only one Sales Tax account and hope to have SAP produce the taxes due per jurisdiction.
Mike

Thanks Suda.
So I only need to setup two tax accounts:
1. One tax account for tracking the AR taxes
2. One tax account for tracking the AP taxes
So, to report the taxes to the different tax jurisdictions, SAP should be able to break then down individually for us to pay them.
I am new at this ... so please be patient.
Mike

Extended withholdig tax

Hi SAp gurus
Can some one kindly send me a step by step configuration document on extended withholding tax. Points will be rewarded.My email id is [email protected]
Thanks in advance
skpatra

Hi,
How To Configure Withholding Tax?
Steps for extended withholding tax :
1. Check withholding tax countries
2. Define official withholding tax code
3. Define business places
4. Maintain factory calender
5. Assign factory calenders to business place
6. Define Ex. Withholding tax types for invoice postings
7. Define EX withholding tax types for payment posting
8. Define Ex. Withholding tax codes
9. portray dependencies between tax types
10.Check recipient types
11.Maintain due dates
12. Assign Ex. Withholding tax types to Company code
13. Activate Ex. Withholding tax
14.Maintain surcharge calculation methods
15.Maintain surcharge Tax codes(separate tax codes)
16.Maintain surcharge rates(surcharge combined with basic WH tax codes)
17. Create a G/L a/C for Ex. Withholding tax
18. Define A/C for Ex. Withholding tax (OBWW)
19. Make changes in Vendor master (XK02)
20. Maintain Company Code Settings:
Path: IMG -> Logistic -> General -> Taxes on goods movement -> India -> Maintain company code settings
21. Specify the document type
22. Maintain number groups
23. Maintain number ranges
24. Assign number ranges to number group
25.Maintain number groups and SAP script form(for TDS certificates)
26.Maintain number ranges
27.Maintain number ranges to number groups
28. postings (F-43)
29. Enter remittance challan
30. Enter bank challan
31. Printing of TDS certificates
32. Printing of annual return

Extended Withholding Tax not calculating

Hi
We are in ECC 6. In development system, we configured Extended Withhoding Tax for India and tested Vendor Invoice FB60. It works perfectly without any problem. It post separate line item for withholding tax as well.
We moved the configuration to Test system, where it is not working at all. All settings are as similar as development system. Vendor master record also similar as development. The document entered for testing is same as development.
Why it is not calculating Withholding tax in Test system? Is it any thing is to be done manually (like activation), table update.. in client independently?
You suggestion is most impartant.
Thanks
Venkat

Dear Venkatasubramanya,
Check the following Master data in your Test System......
1. Vendor Master Data: Check in Withholding tax tab, whether liable tick is activated or not for your Tax Codes
2. Whether your Withholding tax types are oayment type or invoice type
check in GL Master (Vendor Reco Account), Field Status Group, Whether Withholding tax fields are optional or not.
Best Regards

Payment order are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below. It appears on F110 when I try to pay a vendor open item with extended withholding tax:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome

The payment method "Y" the option "payment order only" was marked?
For a withholding tax type with accumulation in a company code with extended withholding tax payment
methods that create only payment orders can´t be used. Payment orders can only be created only if there are
no tax types with accumulation involved in the paid items of the payment run.
The functionality extended withholding tax works fine for Brazil
however, you can´t use the payment order with this functionality.
Please, review your customizing for payment method 'Y" in transaction
FBZP.
Best regards,
Leonardo Vedovelli
FI Support Engineer
SAP Active Global Support

Extended Withholding Tax error

I have done EWT configuration. But while posting the entry, TDS is not deducted and no posting to TDS accounts are made.
I have assigned GL accounts & done the settings in sequence given in SAP nodes
What wrong setting i would have done ?

Hi,
1. Please check withholding tax type is assigned to the company code, IMG: Withholding tax>Extended withholding Tax>Company Code>Assigned Withholding Tax Types to Company Code.
Note: also check the here the proper dates u201Cw/tax obligated frmu201D and u201COblig.to w/tax untilu201D e.g. 01.01.1900 and 31.12.9999.
2. Go to OBWW also check the GL is assigned or not.
3. Also check the field status of recon. account & alternative recon account assigned for special GL for down payment, fields e.g withholding tax code and withholding tax amounts etc. should not be suppressed.
Thanks
Javed

Extended Withholding Tax (India)

While testing TDS calculation at the time of payment posting I am facing a problem.
TDS is not being calculated.
System is asking Tax Code of TAXINN tax procedure such as input tax, output tax etc.
I have done the settings of W/H type, code,recipient type, assigning type to co.code and finally assigning the tax type and tax code combinatin to the endor.
In accounnt determination also, I have chosen a bank account in which 'relevant to cash flow' field is marked.
So what checks are required for TDS calculation?
Thanks & Regards
Dhanashree

Hi
Go to FTXP and make the codes....see here what you are refering to is not extended withholding tax ..here you are refering to TDS. first make configuration settings for tax on sales and purchases.
Go to Financial accounting>financial accounting and global settings>AR/AP>tax on sales and purchases.
Check calculation procedure and then assign the same to the country.
Assign points.
Zia

Extended Withholding tax issue

Hi Everyone,
I am facing a problem with my extended withholding tax.. I have done all the configuration and an entry gets created in table WITH_ITEM but this entry is for $0
I go to MIRO Transaction to create my invoice but the base amount is always blank, after that or at same time I can manually enter the base, or the amount but system is not calculating mnually someone could help me or have any idea on this?
Thank you and regards

Hi
Check your with holding tax type configuration what is the basis for calculation of base amount under the below path:
IMG ‡ Financial Accounting ‡ Financial Accounting Global Settings‡ Withholding Tax‡ Extended Withholding Tax ‡ Calculation‡ Withholding Tax Type ‡ Define Withholding Tax Type for Invoice Posting
Depending on this set up, system determines the base amount on which the with holding tax must be calculated. Under the control tab, you may want to remove the manual with holding tax base amount and make sure that one of the radio buttons in Calculation> Base Amount is maintained depending on how you want to calculate the with holding tax
regards
Sanil Bhandari

Extended Withholding Tax in Country DE, Company Code 1000 in ECC 5 IDES

hi all
can we configure extended withholding tax for the company code 1000 in ECC5 IDES. even after making the whole configuration, while maintaining vendor master code an error message is coming.
message: Entry DE 15 does not exist in T059Z - check your entry
Message no. 00058
15 is Tax Code
i am getting some values in the customisation help hit like "Financial Accounting Basic Settings (New)" but it is not available in the IMG MENU. is it not availbale in IDES.
it is very urgent and i am stuck up. pls provide some inputs
regards,
ashok

Please, check in the IMG that you have correctly defined the table
T059Z:
Financial Accounting -> Financial Accounting Global Settings ->
    Withholding Tax -> Extended Withholding Tax -> Calculation ->
    Withholding Tax Codes -> Define withholding tax codes
Please, also check the customizing of the vendor's Account Group
and set the field Tax category as optional:
Trans. OBD3 -> Select account group -> Company Code Data ->
    W/holding tax data, w/h tax 2 -> Withholding tax category
Regards
Siva

Extended withholding tax deduction from customer credit

hi all
configured the extended withholding tax for deducting tds from customer credit line items.
deduction is required only after the amount accumulation 2500/- (this is also configured)
1.is the recipient type and country is not required for the customer tds..? (it is not visible in the customer master, but is in vendor master)
2.in the amount accumulation for 2500/- consider the following scenario.
>>first bill amount 2450/- (no tax deduction)
>>second bill for Rs.100/- from which i need to deduct tax for 2550/-, since Rs.100 is not enough to deduct 10% tax from tax base 2550.00 it is throwing error.
pls help
with best regards,
sallu c.mathew

Hi Ajeesh,
As already mentionned in standardf help from sap, you use J1INCUST which is a report to record the with. tax certificates sent to you by your clients. In doing so, the system clears the wi. tax to a G/L account that records how much tax your customers have withheld on your behalf, known as the customer tax creditable account. You can offset this tax against your income tax payable at year-end.
And you run the report immediately you receive a certificate from a customer.
Then system creates an accounting document to transfer the withholding tax from the G/L account for the withholding tax deducted by your customers to the customer tax creditable account.
Best regards,
Tarek

Extended Withholding Tax - Minimum Amount

Dear SAP Expert,
In our setup we have extended withholding tax incoming payment for outgoing invoices.
The scenario is if invoice base amount is less than 300 EGP (local curreny) then withholding tax information should not capture invoice document.
I setup minimum based amount on withholding tax type and withholding tax codes level but still when user post outgoing invoices WHT information is captured in FI document.
Because of above issue automatic clearing (F.13) is not happening and we are getting error message like "Items with withholding tax code for customer subject to withholding tax"
looking for expert assistance.
B/R
Prashant Rane

Dear Mani,
Thanks for assistance.
from your example I understand if invoice amount is less than 10,000 then WHT should be applicable.
In my example min invoice amount is 300 EGP
where 2 % WHT is applicable
I wanted to know in which below field I should enter 300 EGP (from your example 10,000)?
Calculation > Withholding Tax Codes > Define Formula for calculating Withholding Tax:
Currency u2013 EGP
W/Tax Type u2013 I2
W/Tax Code u2013 P2
Valid from u2013 01.01.2009
To base amount - 999,999,999,999
W/Tax Rate u2013 2%
Reduced Withholding Tax Rate for Exemption u2013 BLANK
Reduction of Base Amount u2013 BLANK
Decreased Reduction of Base Amount - BLANK
Below is complete customizing I did in my setup
Financial Accounting
Financial Accounting Global Settings
Withholding Tax
Extended Withholding Tax
Calculation > Withholding Tax Type > Define Withholding Tax Type for payment posting:
Withhld tax type u2013 I2
Base Amount u2013 Net Amount
Accumulation Type u2013 No accumulation
Control Data u2013 W/Tax base manual, manual W/tax amnt, w/tax for payments, no cert. numbering
Base amount u2013 W/tax code level
W/tax amount - W/tax code level
Minimum check u2013 Min. base amnt check at doc invoice level
Post W/Tax Amount - YES
Calculation > Withholding Tax Codes > Define Withholding Tax Code:
Withhld tax type u2013 I2
W/tax code - P2
Base Amount u2013 Pecentage subject to tax 100%
Postings Indic- 1
Calculation u2013 W/tax rate u2013 2%
Calculation > Withholding Tax Codes > Define Formula for calculating Withholding Tax:
Currency u2013 EGP
W/Tax Type u2013 I2
W/Tax Code u2013 P2
Valid from u2013 01.01.2009
To base amount - 999,999,999,999
W/Tax Rate u2013 2%
Reduced Withholding Tax Rate for Exemption u2013 BLANK
Reduction of Base Amount u2013 BLANK
Decreased Reduction of Base Amount - BLANK
Calculation > Withholding Tax Codes > Minimum and Maximum Amounts
Min / Max Amounts for W/Tax Type
W/Tax Type u2013 I2
Currency u2013 EGP
Valid from u2013 01.01.2009
Min W/Tax Amount u2013 60
Max W/Tax Amount - 999,999,999,999.00
Min base amount u2013 300
Min / Max Amounts for W/Tax Code
W/Tax Type u2013 I2
W/Tax Code u2013 P2
Currency u2013 EGP
Valid from u2013 01.01.2009
Min W/Tax Amount u2013 60
Max W/Tax Amount - 999,999,999,999.00
Min base amount u2013 300
W/tax base exem amount u2013 BLANK
Company Code > Assign WHT Tax Type To Company Code:
Company Code u2013 0011
W/Tax Type u2013 I2
Customer Data u2013 Subject to W/Tax

Extended Withholding Tax & MIRO - total balance

I have the following situation:
Extended withholding tax is active in company code and the withholding tax type is defined for invoice posting. Everything seems to work correctly except for the following detail: if the invoice has additional charges which are only subject to normal tax rate (VAT) or no tax; then during incoming invoice with MIRO the system cannot balance the accounts; always the difference is the w/t amount even though I have typed the base amount in the corresponding tab. For example, if I receive an invoice for services (no GR) with the following items (the W/T rate is 4% and VAT 16%):
Amount subject to W/T and VAT: 4,600
Other charges (no tax): 194
VAT amount: 736
W/T amount (calculated): 184
Net invoice amount: 5,346
If I type 5346 in the amount field and 4600 in the base amount for w/t then the balance is not correct (difference of 184), unless I type 5530 in the amount field (the others values are calculated correctly).
Am I doing something wrong or missing configuration?
Thanks in advance
JAL

Hi,
The amount payable to vendor is 5346 (ie Gross bill of 5530 (less) withholding tax 184). In the header data, let the amount be maintained as 5530. In the withholding tax tab, change the withholding tax base amount to 4600 and the withholding tax amount as 184. This withholding tax amount gets reduced from the vendor bill of 5530.
On simulation, you can see the screen as per your requirement.
Regards
Hari

Separate withholding tax account in non-extended withholding tax country?

Similar Messages

Maybe you are looking for