Separate X screen. Can't access original screen.

Okay, I'm using a laptop and have an external monitor plugged into it. I've set it to run separate X screens (I want it to run like separate entities).
I've created a bash script to start openbox in the second window.
$HOME/.config/openbox/screen2.sh
In my /usr/bin/openbox-session
Anyway, so it starts off great. Both screen pull up and every thing's happy.
However the problem comes when I switch monitors. When I move my mouse over I can't move it back.
I can't seem to figure out how to get back to the other screen.
Below is my xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder63) Fri Aug 14 17:55:55 PDT 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "DELL 1704FPV"
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Seiko"
HorizSync 30.0 - 75.0
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GS"
BusID "PCI:1:0:0"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8600M GS"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "DFP: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

My bad.
New development though.
I was recently at a LAN party and I was using one of my friends monitors with my laptop.
After setting up everything (it was pretty much the same Xorg minus the Screen Res) I was able to switch back and forth...
I'm not sure but I have a hunch that this might be caused by the fact that my screen's resolution is so much smaller than my laptops resolution.

Similar Messages

  • Can I access Foxtel through apple tv?

    Hi I have just purchased Apple TV in Australia but also subscribe to Foxtel with a separate box.  Can I access the Foxtel through Apple TV or do I have to keep unplugging the Apple TV every time I want to see something on Foxtel and plug in the Foxtel hdmi cord again?  Cheers.

    Connect them to seperate HDMI ports, if the tv has multiple HDMI ports, then use the controls for the tv to switch inputs.

  • Elements 11 opens in the Import Media Screen. How can I access setting to make it open in the original Organizer / Photo Editor screen?

    Elements 11 opens in the Import Media Screen. How can I access setting to make it open in the original Organizer / Photo Editor screen?

    Elements 11 opens in the Import Media Screen. How can I access setting to make it open in the original Organizer / Photo Editor screen?

  • My Macbook won't boot up because there isn't enough free space for my start up disk. It's now stuck on a blue screen. How am I meant to delete files to free up space if I can't access the computer?

    My Macbook won't boot up because there sin't enough free space to run the startup disk. My Macbook now won't go past the blue screen so exactly how am I meant to be able to delete files if I can't access the computer?

    Do you have a bootable backup?
    What operating system are you running? If OS X 10.6 or lower, boot from your original OS X DVD or a retail OS X DVD and then delete files as needed. Your goal should be to get to 10% of your disk capacity free.
    If you have OS X 10.7 Lion or 10.8 Mountain Lion, you don't have many choices in recovery mode (boot holding the command and r keys down).
    If you have a FireWire or Thunderbolt connection, you can try target disk mode with another mac.
    If none of those work, perhaps your local Apple store can help with a bootable external drive.

  • Two days ago, I have a new iphone 4S. After I installed the OS and start the iphone, I found a strange screen says "!9D/JC" that blocks the iphone and I can not access the iphone until click many times on the "Desmiss"  button at the botom of the screen.

    Two days ago, I have a new iphone 4S. After I installed the OS and start the iphone, I found a strange screen says "!9D/JC" that blocks the iphone and I can not access the iphone until click many times on the "Desmiss" button at the botom of the screen.
    I appreciate if you could provide me support to solve this problem especially it consumes the battery a lot.

    Another post originally dated 5th Feb, 2012 with a slightly different unheard of error "%7D/JC".
    https://discussions.apple.com/thread/3710903?start=0&tstart=0
    The user also claimed that he didn't meddle with iOS. No solution could be found though.

  • PSE 11 won't fit screen can't access slider bar at the side of application

    PSE 11 won't fit screen can't access slider bar at the side of application.

    What OS?
    What screen display settings do you have?
    Try changing the screen display settings in Windows or OSX to increase the resolution?
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • Application no longer assignable to a desktop in Spaces. Useable only in full screen, can't access it when not in full screen.

    This is a repost to correctly ID this as a Spaces issue. I am using a MacBook Pro with a second monitor in extended desktop. I put iMovie in full screen and when I put it back, it disappeared off of both desktops. I can see it in Spaces and I can use it in full screen. However, it is not available when not in full screen. When I drag and drop it in Spaces to a desktop, it animates off of the top of the screen versus landing on that desktop. I have tried to change the application assignment by right clicking on the iMovie Icon > Options > Assign To, but it affects nothing. I have rebooted both with the external monitor and without, I have uninstalled and reinstalled iMovie and I have tried many combinations of screen resolutions and it is still assigned somewhere other than a desktop. It appears to no longer be associated with or assignable to a desktop. Anyone have any ideas?

    Can you access iMovie without being in fullscreen when you do not have an external monitor connected? I cannot. No matter the monitor configuration, it is only accessible in full screen for me.
    I agree - it is for sure a bug.

  • Iphone 4s in settings can't access Notes or Mail.  Also can't access mail from home screen. Can't send email. All else is good.

    I need help. I have reset my iphone. I have turned it off then on. Still can't launch my built in mail app from home screen. When I try it goes to blank page then right back to home screen view.
    In settings for the iphone 4s I can not access Notes or Mail, Contacts,Calendars. When I tap either of the two they highlight in blue and then go right back to Home Screen view. I seem to be able to access everything else in settings with no trouble.
    From home screen I have no trouble I can launch the built in utility Notes with no problem. I also can launch Calendars from Home Screen view. My Contacts are still reachable by tapping Phone from H/S view then clicking on contacts.
    I can not launch mail. nor can I send email. Also the built in mail app is not showing it is recieving mail either. All else seems fine.
    I can log in to my email from Safari on iphone and from my laptop with no problem.
    Anyone have any suggestions?  My iphone is out of warranty. Apples only suggestions are To pay for support.
    Thanks in advance

    Just had a thought....was trying to rememberif anything changed last night. I think I installed a mac OS X Security update. That's about the time the trouble started. Any ideas? Thanks.

  • White screen , can't access recovery disk or usb

    hello guys,
    so I have an iMac 27" mid 2011
    and yesterday I was watching something on youtube, and suddenly the screen was flickring and the screen went black. so I hold the power button to shut down the system. tried to restart it and a white screen come out after the grey apple logo and no log in screen come out
    so I tried to log in to the recovery disk and I tried the repair disk and permission. and after that same thing happen white screen after the apple logo.
    after that I tried to log to the recovery disk again. but now I can't access it now I have a blue screen with a vertical lines.
    so I installed the mountain lion osx from the store to put it in a usb to try booting from it. but same blue screen come out for me. and now I'm stuck and don't know what to do to try fixing this problem.
    also I tried all the fixes in apple store discussions site. tried to log with command + v , and I had these logs:
    this logs for the Macintosh HD
    https://www.dropbox.com/s/ytsvsgqmsdofm7w/IMG_5805.jpg
    and this one for the recovery- 10.8 disk :
    https://www.dropbox.com/s/pltyw5duptkhqq4/IMG_5807.jpg
    and this is the blue screen I get when I log to recovery mode:
    https://www.dropbox.com/s/o34oli2s7ziyhl9/IMG_5806.jpg
    also I tried the single user command and tried the fsck command to try and repaire the disk, but nothing happened should I use more commands ? please advice me to fix this problem I don't know what to do to fix this. and here in Saudi Arabia there is no apple stores to go to.
    thank you in advance.

    ok guys I managed to access the Macintosh HD using target mode via my MBP. is there any way I can replace or fix any files to make it boot again ?
    please some help here
    I have alot of work to do left on me.
    thank you

  • I have a consultation with you. Because my sister is updating the IOS8 Iphone 4S. Then was not able to use it. Random screen freezes apple.So bring your instruments to Restore Center. Machine can use it. But can not access .

      Dear Staff
        I have a consultation with you. Because my sister is updating the IOS8 I phone 4S. Then was not able to use it. Random screen freezes apple. So bring your instruments to Restore Center. Machine can use it. But can not access the page that actually works. Because of the problems with ID of icloud.
    She forgot the ID of the user and that of the other. I caught only a password is *******. I would like to ask for technical assistance. What should I do to get back to work normally. Or you can reset the ID and password or not., And set to work. If you do not have an iPhone, this airplane. It becomes a good paperweight itself.Hope you will understand. Buying splash, it is not easy because it's expensive.Learn to understand and to help.
    Highly respected
    Sarawut
    My email: ********
    <Personal Information Edited By Host>

    It is locked to your sisters carrier.
    She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

  • I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

    I recently synced my iphone4 on my iMac, but now I can't access my camera from the lock screen? It shows up but it doesn't open the camera? Does anyone know how to fix this? Thanks!

    Can't believe it was that easy... I'm so dumb! Thanks for your help, I was getting so aggravated! I owe you... Thanks again!

  • Stuck with black screen with Apple and download bar approx 1 quarter done. Downloading Yosemite. It has completely stopped. I can't access anything. Please help

    Stuck with black screen with Apple and download bar approx 1 quarter done. Downloading Yosemite. It has completely stopped. I can't access anything. Please help

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • HT201380 Yesterday this was automatically installed.  Today I can't access a document in Pages.  A prompt says I need a Pages update.  But the next screen tests for updates and informs me everything is up to date.  What's up?

    Yesterday this was automatically installed.  Today I can't access a document in Pages.  A prompt says I need a Pages update.  But the next screen tests for updates and informs me everything is up to date.  What's up?

    It's highly unlikely that the Pages update problem has anything to do with the ARD client update, since the client is not involved in any way with Software Update. I'd suggest asking for assistance with the update problem in the forum appropriate for your version of Mac OS X.
    Regards.

  • All of a sudden, all I get is a 1" x 1.5" box in the middle of the screen that says Firefox, and Yahoo beneath that. I have deleted and reinstalled, same thing. Help, I can't access Firefox after many years.

    Besides the word Firefox is a reddish square. Clicking on either the word or the box makes it disappear down to the bottom try. I am at a loss. I've always used Firefox without any problems, now I can't access it. I deleted and reinstalled 4 times this morning. Help

    Hi,
    Please see [https://support.mozilla.org/en-US/kb/Toolbar%20keeps%20resetting?redirectlocale=en-US&redirectslug=Firefox+window+is+too+large+or+opens+off+screen this].

Maybe you are looking for

  • ProRes files act crazy and transcoding to Animation codec gets ugly

    So, allegedly, the Animation codec is lossless. However, when I take something encoded with Apple ProRes 422 HQ and transcode to Animation within the Quicktime Pro software, I see noticeable differences. Including: color change and increased aliasing

  • External hard drive not appearing in Airport Utility

    I have connected an Iomega eGo portable hard drive to my airport extreme but i cannot access it from my airport utility or airport disk utility. In fact it doesn't appear at all, even though the disk seems to be powered up and working. Do i need a se

  • Error when trying to use LogMiner with Oracle 8.1.6.0.0

    Hi everybody, I'm trying to use LogMiner with Oracle 8.1.6.0.0. When I execute the following code with SQL*Plus, I have an error. BEGIN DBMS_LOGMNR.START_LOGMNR (options => dbms_logmnr.dict_from_online_catalog); END; The error displayed by SQL*Plus i

  • Services not testing in SICF

    Hi All i have installed Netwever BI 7.0.All the post installtion steps are also completed.The problem is that i whenever a test any service in SICF,it fails.Bex broadcaster is also not working.I think it is related to service issue.Kindly suggest. Sh

  • Response only shows empty fields

    Hi all, just having some problems try to view my responses. If I Open or Save a response, the fields in the form appear blank - I can only see them if I Preview the form. Anyone know what's wrong? Thanks a lot!!