Sequence help

Hi All,
Could you please tell me your suggestions on below problem.
We have three type of users ( "ADM", "READ", "READWRITE")
I have created the sequence in ADM user and gave grant to read & " ReadWrite" users.
GRANT SELECT ON SEQ_FINANCE TO READ;
GRANT SELECT ON SEQ_FINANCE TO READWRITE;
both grant scripts are executed success.
I login to read user, i can see the sequence details from below query.
select * from all_sequences where sequencename ='SEQ_FINANCE'
But while i am trying to execute below query,
SELECT SEQ_FINANCE.nextval from DUAL
I am getting an error as SQL Error Code: 2289
SQL Message: ORA-02289: sequence does not exist
Could you please tell me how can solve this issue.
Thanks for your support.

>
But while i am trying to execute below query,
SELECT SEQ_FINANCE.nextval from DUAL
I am getting an error as SQL Error Code: 2289
SQL Message: ORA-02289: sequence does not exist
>
You need to use the schema prefix unless you create a synonym. See if this works.
SELECT ADM.SEQ_FINANCE.nextval from DUAL

Similar Messages

  • Video Stutters in Sequence - Help needed ASAP!

    I have a video shot at 24FPS in Quicktime format. Plays back fine in my preview pane but on the canvas it stutters between cuts. No effects were added. At the last second of a clip the frame holds and then jumps ahead to the next clip. This happens when I export as well.
    I opened up the program and drug the clip to the timeline. FCP asked me if I wanted to "Change the sequence settings to match the clip settings" and I clicked yes. Shouldn't this make playback smooth? What am I missing?
    I'm under a very tight deadline. Any help would be very much appreciated.
    Thanks!

    Is this h.264 video?
    If so, convert it to pro res using MPEG StreamClip. Pro res is an editing codec, h.264 is not.
    Here's a tutorial on how to accomplish this.

  • Flash sequence - help needed!

    I'm trying to create an entrance page to a website in Flash.
    Here is the sequence I'd like to achieve:
    1. (Page loads) - only the background picture should be seen for around 1 second. 
    2. A translucient box-shaped menu unfolds (above the background, within an approx 1 sec time span) with two hyperlinked options inside.
    3. If the cursor hovers over the unfolded menu box, the background fades to black and white - within approx 1/2 sec. time span, and if the cursor moves away from the menu box (returns to the background), the background changes back to its normal colour (in the same 1/2 sec. colour change sequence).
    4. If the cursor hovers over one of the options then menu box, the text changes colour.
    So far, I've attempted the menu but the unfolding sequence isn't very smooth.  Ideally, the box would begin as a 1 pixel dot, shoot out both ways horizontally into a line, and then unfold into it's full size.  But I can't seem to get the shooting motion of the pixel growing into a line - the pixel just becomes a line.
    Any help would be much appreciated!
    Cheers,
    Bella

    Are you using any kind of tweens for this?  To get a line to grow from a dot, the easiest way is to first make the line, then squash it into a dot by chhanging its width.  Make sure the line's registration is centered on the line.
    If the menu is an object, you should be able to squash it down to a flat line by setting its height to 1 pixel.  Then you can turn that into a dot by changing its width to be 1 pixel.
    You can use either timeline tweening or actionscript tweening.

  • Timeline NOT opening Sequences - Help!

    Hello all,
    I've got a major emergency that I would greatly appreciate any help with. I've been editing a documentary for the last two years and recently have started to have a few issues.
    My timeline won't open any of my sequences except for one or two of a really old sequence. When I click to open various sequences in the Browser, the canvas briefly shows the labeled sequence but then it disappears, never appearing in my actual timeline. Therefore I cannot edit or even see all the work I've done in the most recent sequences.
    This happened a few weeks ago and I deleted all of the render files(over 18 gb) and things were fine. Now I only have 3.7 gigs of render files and its happening all over.
    Please help with any suggestions. Final Cut will be the death of me and I am on a tight deadline. Thank you so much in advance!
    - jon
    G5 Dual 1.8GHz   Mac OS X (10.3.9)   Final Cut 4.1

    Hey Patrick,
    At most a few of the sequences are around 70 minutes, most are less than 30. I have more than 20 gigs left on my internal HD, which is where I am saving the project file. The rest of the project file is saved throughout three external HD's, where the mininum amount of space left is 10 gigs.
    I've tried creating new project file and doing exactly that but it still wont open the sequence, the new sequence shows in the canvas for a split second then disappears, with nothing in the timeline...
    Any thoughts?
    Thank you.

  • Creating TV Title Sequence Help

    I have created many successful tv shows using Final Cut Express, and I am embarking on the 10th season of my successful reality show.
    I am introducing a new Title Sequence for the 60 opening and I need help!
    I would like to know which effects and software you would suggest to best construct an opening.
    I don't know if anyone has seen shows like 'Survivor' & 'Big Brother', but most of the shows in that genre take action clips and seem to change their appearance, and overlap them.
    It's hard to describe, but if anyone can offer some advice that would amazing!

    Most of the TV show opens can be done in FCE. If I remember rightly, there's nothing in the Survivor open that can't be reproduced pretty closely in FCE. The logo is obviously made in a graphics application, mostly likely Illustrator and/or Photoshop. The CSI show opens can all be done in FCE. Most of the 24 open can be done in FCE. The graphical element for the numbers would need something like After Effects or Motion, though you could probably do most of it in LiveType, or something that looks similar. The more graphical the open the more likely it needs a specialist compositing application.

  • 360 photo sequence help

    I am currently experimenting with 360 photography and I am pulling my jpg sequences into after effects to mask out anything on the outer edges of the frame, figured it would be easier than working with each image in PS.  Long story short, since it is a series of photographs on a turntable, sometimes the spin is shaky, like the object appears to vibrate when it spins.  I have tried warp stabilizer a little bit but since the camera is stationary and the object is spinning 360 degrees on a white seamless backdrop it doesn't seem to help.
    Any advice!?!
    Thank you!

    Here's a quick low res export.  Typically I'd reshoot, but I've reshot so many of these 360 things I figured I should ask around to see if there is a post-solution.
    I've tried hitting some keyframes where the bigger bumps are and just nudging the position here and there but to no avail.
    Thanks for your responses everyone!

  • Constant kernel panic in regular boot sequence - HELP!

    Hi,
    I purchased my mac pro in march of 08. By june, my monitor had begun emitting a pink hue over everything. I replaced the monitor only to find that the problem was related to the computer itself, the pink color persisted on the new monitor. So I started using the one other working monitor port and researching the problem. I heard from a couple people that it sounded like a problem with my video card. It continued to worsen, the crash rate started to escalate slowly over a period of 4-5 months. Now it consistently crashes within 5 minutes of booting up, usually crashing immediately when the interface loads or shortly beforehand.
    I took it into an apple certified technician to have it looked at. I brought only the computer itself since the problem had persisted on multiple monitors. One week later, they told me there was nothing wrong with the video card and they couldn't reproduce the problems i had described. So i bought a new vga/dvi converter and brought it home only to find the EXACT same issues on both monitor ports, pink screen or constant kernel panic.
    So I zapped the PRAM 3 times, reset the power source, cleaned out the inside of the computer, played chinese firedrill with my ram cards, and rebooted in safemode. It FINALLY WORKS but ONLY in safemode which leads me to believe there is a faulty system extension or driver that is causing the kernel panic.
    What is the simplest way to resolve this problem? I can't spend 5 hours isolating the possible .kext files. Will upgrading my OS to leopard fix these issues, i.e. replace the system extensions with new files that might eliminate the problem?
    I appreciate anyone that can offer help. Thanks!

    Thanks BDAqua for your feedback!
    I checked the panic log and the system log but still can't see what might be causing the problem. I tried booting from disk by pushing the 'd' key directly after the startup beep and before the gray screen appears to no avail. I also tried the 'c' key, command-'d', and option-'d' to no avail. When i access the bootdisk from the volume on my desktop and click 'install mac os x' i get the following error:
    "Mac os 10.4 cannot be installed on this machine. Please consult the documentation for a list of supported Macintosh computers."
    This seems odd since i am running 10.4.11. Below is a sample entry from the kernel panic log and the correlated logs from system log at the time of the panic. Is there anything else i can do? I don't understand why the mac tech support wasn't able to reproduce these debilitating problems.
    Sat Jan 24 12:28:28 2009
    panic(cpu 3 caller 0x001A49CB): Unresolved kernel trap (CPU 3, Type 14=page fault), registers:
    CR0: 0x80010033, CR2: 0x80b1438e, CR3: 0x010a5000, CR4: 0x000006e0
    EAX: 0x00000000, EBX: 0x00000001, ECX: 0x4e153cc0, EDX: 0x80b14000
    CR2: 0x80b1438e, EBP: 0x4e153ce8, ESI: 0x0caff000, EDI: 0x000005eb
    EFL: 0x00010286, EIP: 0x009114db, CS: 0x00000008, DS: 0x00000010
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x4e153a98 : 0x128d0d (0x3cc65c 0x4e153abc 0x131f95 0x0)
    0x4e153ad8 : 0x1a49cb (0x3d2a94 0x3 0xe 0x3d22b8)
    0x4e153be8 : 0x19b3a4 (0x4e153c00 0x10 0x0 0x200)
    0x4e153ce8 : 0x91163a (0xcaff000 0x5eb 0x0 0x1)
    0x4e153d08 : 0x8f4b90 (0xcaff000 0x5eb 0xd077004 0x9)
    0x4e153d28 : 0x3b3630 (0xd077000 0x5eb 0xd2a19cc 0x0)
    0x4e153d68 : 0x18a698 (0xd077000 0x9 0xd2a19c4 0x1)
    0x4e153db8 : 0x12b4ee (0xd2a199c 0xd0d9ea8 0x0 0x0)
    0x4e153df8 : 0x124b17 (0xd2a1900 0x0 0x30 0x4e153edc)
    0x4e153f08 : 0x195f2e (0x4e153f44 0x0 0x0 0x0)
    0x4e153fc8 : 0x19b81e (0xcf0d960 0x0 0x19e0b5 0xce969a4) No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbffedb48
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.GeForce(4.5.6)@0x8e2000
    dependency: com.apple.iokit.IOPCIFamily(2.2)@0x571000
    dependency: com.apple.iokit.IOGraphicsFamily(1.4.8)@0x6bc000
    dependency: com.apple.iokit.IONDRVSupport(1.4.8)@0x6d7000
    dependency: com.apple.NVDAResman(4.5.6)@0x6e6000
    Kernel version:
    Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
    System logs:
    Jan 24 12:28:16 localhost kernel[0]: hi mem tramps at 0xffe00000
    Jan 24 12:28:16 localhost kernel[0]: PAE enabled
    Jan 24 12:28:16 localhost kernel[0]: 64 bit mode enabled
    Jan 24 12:28:16 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Jan 24 12:28:16 localhost kernel[0]: vmpagebootstrap: 2007570 free pages
    Jan 24 12:28:16 localhost kernel[0]: migtable_maxdispl = 71
    Jan 24 12:28:16 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Jan 24 12:28:16 localhost kernel[0]: 78 prelinked modules
    Jan 24 12:28:16 localhost kernel[0]: ACPI CA 20060421
    Jan 24 12:28:16 localhost kernel[0]: AppleIntelCPUPowerManagement: ready
    Jan 24 12:28:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    Jan 24 12:28:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    Jan 24 12:28:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=7 Enabled
    Jan 24 12:28:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=6 Enabled
    Jan 24 12:28:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
    Jan 24 12:28:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
    Jan 24 12:28:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
    Jan 24 12:28:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
    Jan 24 12:28:16 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Jan 24 12:28:16 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Jan 24 12:28:16 localhost kernel[0]: using 16384 buffer headers and 4096 cluster IO buffer headers
    Jan 24 12:28:16 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Jan 24 12:28:16 localhost kernel[0]: Started CPU 01
    Jan 24 12:28:16 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Jan 24 12:28:16 localhost kernel[0]: Started CPU 02
    Jan 24 12:28:16 localhost kernel[0]: Enabling XMM register save/restore and SSE/SSE2 opcodes
    Jan 24 12:28:16 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    Jan 24 12:28:16 localhost kernel[0]: Started CPU 03
    Jan 24 12:28:16 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Jan 24 12:28:16 localhost kernel[0]: Security auditing service present
    Jan 24 12:28:16 localhost kernel[0]: BSM auditing present
    Jan 24 12:28:16 localhost kernel[0]: disabled
    Jan 24 12:28:16 localhost kernel[0]: rooting via boot-uuid from /chosen: 884C6DAA-F2D9-4CE3-B7F9-35934D2A6EDE
    Jan 24 12:28:16 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Jan 24 12:28:16 localhost kernel[0]: USB caused wake event (EHCI)
    Jan 24 12:28:16 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 001d4ffffe716bae; max speed s800.
    Jan 24 12:28:16 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/WDC WD2500AAJS-41RYA0 Media/IOGUIDPartitionScheme/AppleHFS_Untitled1@2
    Jan 24 12:28:16 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    Jan 24 12:28:16 localhost kernel[0]: jnl: replay_journal: from: 23120896 to: 12901376 (joffset 0xf502000)
    Jan 24 12:28:16 localhost kernel[0]: HFS: Removed 2 orphaned unlinked files
    Jan 24 12:28:16 localhost kernel[0]: Jettisoning kernel linker.
    Jan 24 12:28:16 localhost kernel[0]: Resetting IOCatalogue.
    Jan 24 12:28:16 localhost kernel[0]: PXS1: family specific matching fails
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 1
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 2
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 2
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 2
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 2
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 2
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 24
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 24
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 24
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 24
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 24
    Jan 24 12:28:16 localhost kernel[0]: Matching service count = 24
    Jan 24 12:28:16 localhost kernel[0]: NVDANV40HAL loaded and registered.
    Jan 24 12:28:16 localhost kernel[0]: Previous Shutdown Cause: 3
    Jan 24 12:28:16 localhost kernel[0]: PXS1: family specific matching fails
    Jan 24 12:28:16 localhost kernel[0]: PXS1: family specific matching fails
    Jan 24 12:28:16 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
    Jan 24 12:28:16 localhost mDNSResponder-108.6 (Jul 19 2007 11: 41:28)[33]: starting
    Jan 24 12:28:16 localhost memberd[40]: memberd starting up
    Jan 24 12:28:16 localhost DirectoryService[45]: Launched version 2.1 (v353.6)
    Jan 24 12:28:16 localhost lookupd[46]: lookupd (version 369.8) starting - Sat Jan 24 12:28:16 2009
    Jan 24 12:28:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:0e:eb:08
    Jan 24 12:28:17 localhost configd[37]: No AirPort Driver found.
    Jan 24 12:28:17 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:0e:eb:09
    Jan 24 12:28:17 localhost diskarbitrationd[39]: disk0s2 hfs CDB580D4-4F11-395E-BF17-94B497D92427 Macintosh HD /
    Jan 24 12:28:17 localhost lookupd[61]: lookupd (version 369.8) starting - Sat Jan 24 12:28:17 2009
    Jan 24 12:28:18 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
    Jan 24 12:28:18 localhost loginwindow[67]: Login Window Started Security Agent
    Jan 24 12:28:20 localhost kernel[0]: shared_region: 0xb95f59c: lsf_map: RO mapping #0 not in segmentshared region: 0xb95f59c: 5 mappings base_offset=0x3c38000
    Jan 24 12:28:20 localhost mDNSResponder: Adding browse domain local.
    Jan 24 12:28:20 localhost kernel[0]: shared region: 0xb95f59c: #0: addr=0x3c190000, size=0x2d000, file_offset=0x91000, prot=(5,5)
    Jan 24 12:28:20 localhost kernel[0]: shared region: 0xb95f59c: #1: addr=0x0, size=0x4000, file_offset=0xbe000, prot=(11,11)
    Jan 24 12:28:20 localhost kernel[0]: shared region: 0xb95f59c: #2: addr=0x4000, size=0x3000, file_offset=0x0, prot=(27,27)
    Jan 24 12:28:20 localhost kernel[0]: shared region: 0xb95f59c: #3: addr=0x7000, size=0x1000, file_offset=0xc2000, prot=(15,15)
    Jan 24 12:28:20 localhost kernel[0]: shared region: 0xb95f59c: #4: addr=0x3c1bd000, size=0xacc8, file_offset=0xc3000, prot=(1,1)
    Jan 24 12:28:23 localhost kernel[0]: Intel8254x -- Link Down -- 00:17:f2:0e:eb:08 -- called by enableHardware() --
    Jan 24 12:28:23 localhost kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
    Jan 24 12:28:23 localhost kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0x0
    Jan 24 12:28:23 localhost kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
    Jan 24 12:28:23 localhost kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x4000
    Jan 24 12:28:23 localhost kernel[0]: -- PHY Specific Status Register (17d) = 0x8000
    Jan 24 12:28:27 Xaosai kernel[0]: Intel8254x -- Link Down -- 00:17:f2:0e:eb:09 -- called by enableHardware() --
    Jan 24 12:28:27 Xaosai kernel[0]: -- Auto-Negotiation Advertisement Register (04d) = 0xde1
    Jan 24 12:28:27 Xaosai configd[37]: setting hostname to "Xaosai.local"
    Jan 24 12:28:27 Xaosai kernel[0]: -- Auto-Negotiation Link Partner Ability Register (05d) = 0x0
    Jan 24 12:28:27 Xaosai kernel[0]: -- Auto-Negotiation Gigabit Advertisement Register (09d) = 0xe00
    Jan 24 12:28:27 Xaosai kernel[0]: -- Auto-Negotiation Gigabit Link Partner Ability Register (10d) = 0x4000
    Jan 24 12:28:27 Xaosai kernel[0]: -- PHY Specific Status Register (17d) = 0x8000
    *Jan 24 12:28:36 Xaosai diskarbitrationd[39]: SystemUIServer [84]:12587 not responding.*

  • ADT Sequence help!

    public Document(String name)
    docName = name;
    // Read existing doc contents (if any)
    try
    File docFile = new File(docName);
    if (docFile.exists() && docFile.isFile() &&
    docFile.canRead())
    BufferedReader docFileReader;
    docFileReader = new BufferedReader(
    new FileReader(docName));
    String aLine = docFileReader.readLine();
    while (aLine != null)
    System.out.println("Document: read "+aLine);
    aLine = docFileReader.readLine();
    docFileReader.close();
    else
    System.out.println("Document: creating "+name);
    catch (Exception e)
    System.out.println("Document: Cannot open "+name);
    System.exit(1);
    This is the constructor for reading in from a file. Problem Im storing each file line as a String aLine as you can see. But Im having trouble storing the line in the ADT sequence. Anyone got any ideas? I've been trying for ages &can't figure it out :(

    Example for save files
    public void saveString(String fileToSave, String str) {
                  try {
                       FileOutputStream fos2 = new FileOutputStream( fileToSave );
                       int largo2 = str.length();
                       int i2;
                       char[] data2 = str.toCharArray();
                       for( i2=0; i2<largo2; i2++ ) {
                            fos2.write( data2[i2] );
                       fos2.close();
                         } catch(IOException e) { System.out.println (e); }     
        }And for read (by line)..
    static protected String buscarEnFile(String arch) {
             String str = null;
             File f = new File(arch);
             try {
                  Reader in = new FileReader(f);
                  char[] buff = new char[9999];
                  int nch;
                  while ((nch = in.read(buff, 0, buff.length)) != -1) {
                       str = new String(buff, 0, nch);
             catch (IOException e) {
              JOptionPane.showMessageDialog(null, "Se ah producido un error al leer el explorer.\nAcci�n finalizada.", "Error!", JOptionPane.WARNING_MESSAGE);
             str=null;
             return str;
        }Good luck!
    Alvaro
    http://zetazoft.tuportal.com

  • Work with SEQUENCE, Help me, I'm a NeewbY!

    Hi to all, I've a problem,
    I want to create a form based on db that uses sequence (auto-number) for the primary key.
    I'm working with Jdeveloper+ jheadstart (to build Model & view controller)
    I don't want to insert the PK, i want that ID is inserted automatically in the form (in the master and also in detail form)....there are a way like p_session (of Portal) or where can I insert an simple PL/SQL (or sql) code??
    Thabk you, I'm a very very beginner!
    (Note the Master have a PK_1 with sequence but not a trigger, the detail have a form composed by a PK_2 (with sequence and trigger), FK_1 (linked to PK_1), and another FK_2)

    Hi,
    Why you didn't create a trigger? With trigger you can create entry with ID=null, then trrigger calls the sequence automatically to populate the ID.
    If needed:
    CREATE OR REPLACE
    TRIGGER ASSIGN_MYTABLE_ID BEFORE INSERT ON MYTABLE
    FOR EACH ROW
    BEGIN
    IF :NEW.MYTABLE_ID IS NULL OR :NEW.MYTABLE_ID < 0 THEN
    SELECT MYTABLE_SEQ.NEXTVAL
    INTO :NEW.MYTABLE_ID
    FROM DUAL;
    END IF;
    END;
    Regards,
    Tif

  • Export to image sequence help required

    In QT Pro this seems to work fine but when I look in the folder I have saved all the images, they are all the same! 6000 of the same frame...what I am doing wrong? I want to take an image sequence of each different frame from the movie

    Off topic:
    You don't want to show your new bride more than a dozen (flattering) from the video as "still image" files. I've had two wives and have gone through the experience.
    Another fact of QuickTime video to still image format is the image quality found in those exports. They will be sized the same as the current display size of your video (expand the window prior to export to get a larger dimension) but you will not be able to print out copies at more than postage stamp sizes.
    Try an image sequence export using just a "selection" (you'll use the letter i and o keys to make one) and see if they export properly.

  • 16bit 1998x1080 Tiff Sequence - Help

    I have been asked to provide a motion graphic sequence in AFX for a cinema advert. Apart from a few small photography stills graphics are all in Illustrator native format and blocks of colour so is it best for me to work in a smaller comp say half the output size and 8 bits and then export at full 1998x1080 16 bit resolution utilising the conitnuous rasterization settings maybe in a new comp. Or should I work natively thus reducing render times. Any tips for working on this project it's all pretty new to me, for example presumably I need to export as progressive frames, should I use motion blur for spinning graphics, any general advice guys. HELP

    Always use the final output parameters as your guide to creating the job specs. Working at a different resolution and then converting is likely to result in a mess - don't do it to yourself.
    So create your job using the 1998 x 1080 specs you have. You can, of course, spend most of your AE design time using lower preview resolutions. I often preview at 1/4 res when doing stuff for cinema.
    You can also keep the project at 8 bit until render time, then switch to 16 bit. Be warned that switching to 32 bit is likely to change the look of some stuff, so if you plan to render at 32 bit then you should work with it all the way through.
    Definitely render progressive, not interlaced, for cinema. Yes, use Motion Blur like you would for any other project. Presumably your output will run at 24fps. Make sure any audio will be mixed for cinema, or it will sound flat and lower-level than it should. My cinema stuff is always delivered as 16-bit TIFF image sequences - check with your facility to verify what they prefer.

  • Create sequence help

    Hi all
    please
    How to create sequence with alpha
    like example
    aaa
    aab
    aac
    aad
    aaz
    aba
    abb
    abc
    abd
    abz
    aca
    acb
    acc
    acd
    acz
    ada
    adb
    adc
    add
    adz
    xyz
    xza
    ...

    DROP SEQUENCE S
    CREATE SEQUENCE S START WITH 0 MINVALUE 0
    DECLARE
        v_decimal NUMBER;
        v_base26  VARCHAR2(10);
    BEGIN
        FOR rec in (select s.nextval v_i from dual connect by level <= 52) LOOP
          v_decimal := rec.v_i;
          v_base26  := NULL;
          LOOP
            v_base26 := CHR(ASCII('A') + MOD(v_decimal,26)) || v_base26;
            EXIT WHEN v_decimal < 26;
            v_decimal := TRUNC(v_decimal / 26) - 1;
          END LOOP;
          DBMS_OUTPUT.PUT_LINE(TO_CHAR(rec.v_i,'999.') || ' ' || v_base26);
        END LOOP;
    END;
    0. A
    1. B
    2. C
    3. D
    4. E
    5. F
    6. G
    7. H
    8. I
    9. J
    10. K
    11. L
    12. M
    13. N
    14. O
    15. P
    16. Q
    17. R
    18. S
    19. T
    20. U
    21. V
    22. W
    23. X
    24. Y
    25. Z
    26. AA
    27. AB
    28. AC
    29. AD
    30. AE
    31. AF
    32. AG
    33. AH
    34. AI
    35. AJ
    36. AK
    37. AL
    38. AM
    39. AN
    40. AO
    41. AP
    42. AQ
    43. AR
    44. AS
    45. AT
    46. AU
    47. AV
    48. AW
    49. AX
    50. AY
    51. AZ
    PL/SQL procedure successfully completed.
    SQL> SY.

  • Image sequence help needed

    Hi people, first time posting, spent a while researching nobody seems to have covered this as far as i looked. I am dealing with about 1200 images in flash, in sequence, i tried importing the frames all at once and they all came up blank... for some reason they were red up until 315 and then the rest were blank, some were black. People have said that it is likely a ram issue? what the hell? the images total just under a half a gig and i have 8gb of ram, i looked at my processes and flash is only using about 3gb of ram. I tried importing about 100 images at a time, and i got to about 300 and again, the same issue started, after seeing them all work up to 300. I need to be able to take out a frame here or there from a video. I hope i need not exaplin more, the point is i need this image sequence to work, and i need to be able to see all 1200 frames and it simply is not working for me. Any solutions? flash has been driving me nuts lately.

    This is a known limitation in Flash. Do note that the size of the image on the filesystem may say something like half a gig but once you take it into Photoshop you'll see the uncompressed actual size of the image (on the bottom of each window). For example a 52KB JPEG in Photoshop right now states it's 950.2K. I'm assuming your images are probably larger so you can quickly see how this becomes an issue. Open 700 52kb images and you're sitting at 7GB ram, 1GB for the OS and are now in pagefile (HD ram).
    Flash is about being light weight. After Effects would sequence those images like nothing but Flash is not designed like that.
    The solution depends on your needs. Why are you importing 1200 frames individually? If the frames make up a video (or several videos) you should create them in an actual video while saving huge amounts of disk space and processor, while also getting around this Flash limitation.

  • Quicktime Movie is blank when I create it from the sequence HELP!

    I was unable to capture unto the external hard drive so I captured onto another on my computer. I have had to do this before. I imported the captures onto my project. I worked on the project in Final Cut Express 2, saving it carefully and all. Now I see all my hard work but it is blank when I try to make it into a Quicktime movie.

    Can you still play your project from the FCE timeline?
    If so, select it and choose File>Export>QuickTime Movie.
    If you are going to move the QT file to another Mac you must also select the "Make Movie Self-contained" box.
    Remember that the clips on your timeline and Browser are only "virtual" ones that reference your real captured clips. If you have deleted the original clips from your capture scratch disk you will lose all your project.

  • Specific sequence help!

    Hi, I've done a bit with flash, but am still relatively new
    to the whole thing.
    I'm making a flash header for a website and what I want it to
    do is play the intro once and then repeat the main section once
    it's loaded. So like frames 1-85 should only play as soon as it's
    loaded and then I want it to repeat 85-250 continuously. What's the
    easiest way to do this?

    on frame 250, (in the action panel)
    gotoAndPlay(85);
    That will play 85-250 over and over again.

Maybe you are looking for

  • Session retention with Java WD and OBN navigation

    Hi everybody, We have a Java WD application integrated into Business byDesign Portal. From this application we start OBN navigation in the same window. OBN navigation  always starts a new session with ABAP back-end. Is it possible to retain the same

  • Coated & Uncoated swatches, Why do we have both?

    I was a pressman for 15 years so I understand what the differences are in the Pantone books and why they are needed when printing but what is the reason we have separate libraries for coated and uncoated Pantone colors for digital work? I have a glos

  • HT4623 Help with software update

    I do not see a software update button in my general settings on my iPad....how would I update to ios7?

  • Manual staging in oracle 11i Apps installations

    Hi, I am newbei to oracle app 11i please let me know Is it possible to stage manually instead of using perl script. I am preparing folders manually and loading cds to those folders and then planning to start the installation will it work?? Regards, A

  • TPM Data Source

    Hi, I am new to TPM. I am currently configuring a TPM scenario. We  need to configure the baseline volume  planning data. However , I am facing certain problems in identifying the data source for TPM. Could you please guide me in finding the names of