Sequence of Elements in the JSP Life Cycle

How do I place several elements such as
Create Instance
Page translation
JSP compilation
Load class
in the JSP life cycle
Call jspInit
Call _jspService
Call jspDestroy

See if http://java.sun.com/j2ee/tutorial/doc/JSPIntro4.html#62582 if this is what you wanted to know.

Similar Messages

Where in the MIDlet life-cycle should I create multiple forms with LWUIT ?

Hi all,
I must create two LWUIT forms in my application. Where should I create the two forms ? I created the first form in the startApp life-cycle method , and when I tried to create also the second form in the startApp method then there is a NullPointerException raised when running the application !
So where , or how , should I create the second form ?
Thank you very much indeed
Edited by: andrianiaina on May 20, 2011 1:59 AM

I think the problem here is that Arlhoolie wants all of the different TEBs to behave as if they were part of a single interaction that submits only ONE result to the quiz. Using multiple TEBs in Captivate means that you have multiple scored objects and therefore multiple results being submitted to the quiz.
If you want a single Success or Failure result submitted to the quiz based on the results from multiple interactive objects then there really is no simple way to do it. But you could try using the Infosemantics Interactive Master widget to combine all the TEBs as slave objects that report to the Master Widget, which then reports a single score to the quiz based on the results from the slave objects.
You can learn more about the Master widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/interactive-master
http://www.infosemantics.com.au/interactivemaster/help
You can download a free trial version of the widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
One caveat you should be aware of is that this widget is not HTML5 compatible.

What is the total life cycle involved in any project

Hi ,
Can n e body help me in knowing the complete life cycle of any project.
Starting from the point customer wants to implement SAP for their business to implementation and support.
thanks in advance,
sastry

Dear Sastry,
It actually depends on various factors, such as :
1. how many modules they want to implement.
2. Team Size.
3. Organizational Structure (Volume of data)
4. Legacy System
5. Business Complexity etc.
There is no hard and fast rule that every project should be completed in a particular duration of time. Depending on the above factors, it may vary any where from 6 months to 18 months or so. (Approximately, it may be less than 6 months or more than 18 months in some exceptional cases).
Usually it is divided into phases:
1. Project Preparation : Project team, infrastructure, Software, Steering committe etc will be identified in this phase.
2. Business Blue Print : Re-engineering of Business process and BBP sign off.
3. Realization : Analysing Gap and Realization of possible customization and development effort
4. Final Preparation : Development and Configuration
5. Go Live and Post Go Live support : Going Live and Support after go live
You would allot specific time periods for each of these phases and will set milestones accordingly.
or it could even be like :
Project Start
Analysis
Design
Design Freeze / Client Sign-off
Construction
Testing
Implementation
Project End
Project Management Framework
Post Close Review
Training
Change Management
Refer following links for more info:
http://en.wikipedia.org/wiki/SAP_Implementation
http://www.sapfans.com/sapfans/asap/be_01_e.htm
Reward points if it is helpful.
Thanks and Regards,
Naveen.

Feedback on the potential use of the tool and about the Task Life Cycle

Hi
The task statuses does not considers some statues. We have worked on the task lifecycle for workflows (see image below). You are missing: Created, offered, allocated before getting the category of not started because otherwise your problem might be to not have resources availables.
Once In Progress a task can be suspended/resumed, delegated.Failed or Cancelled, skipped. Once a task is Completed, At Risk and Failed.:
We have been working on workflow modeling for developing UIs. The WorkflowLab project has a lot of potential if we imagine an automated process to generate Flex (Information Systems) applications based on Workflows. Imagine that the granular details of a task are mapped onto Flex UIs.
Have you ever consider this potential of using a workflow model as a design of an Information system?

If you need further information, this is a site with publicly available papers of this topic.
http://www.isys.ucl.ac.be/bchi/members/jgu/publications.htm
The main topic is on how from a workflow model the User Interfaces of the system modeled can be generated but special atention has been paid to task modeling.
If we can be of any help we would be very pleased to collaborate with your project.
Juan

JSF Ri 1.1: Conversion executed in the wrong life cycle?

Hi,
If you look at the converter api doc of getObjectAs it states: "Convert the specified string value, which is associated with the specified UIComponent, into a model data object that is appropriate for being stored during the Apply Request Values phase of the request processing lifecycle."
However when I run a simple test with a debug phaselistener and a converter and they print data using system.out.println I see that the getAsObject is called in the process validations phase. I think this is incorrect. Has anybody seen this before?
With kind regards,
/Arnoud.
Before:RESTORE_VIEW 1
After:RESTORE_VIEW 1
Before:APPLY_REQUEST_VALUES 2
After:APPLY_REQUEST_VALUES 2
Before:PROCESS_VALIDATIONS 3
Converter getAsObject
After:PROCESS_VALIDATIONS 3
Before:UPDATE_MODEL_VALUES 4
After:UPDATE_MODEL_VALUES 4
Before:INVOKE_APPLICATION 5
After:INVOKE_APPLICATION 5
Before:RENDER_RESPONSE 6
Converter getAsString
After:RENDER_RESPONSE 6

It seems then, that the 1.1 specification has contradictions:
Under Section "3.3.2 Converter" it clearly reads as it was quoted above:
+This method [getAsObject] is used to convert the presentation view of a components value+
+(typically a String that was received as a request parameter) into the corresponding+
+model view. It is called during the Apply Request Values phase of the request+
processing lifecycle.
There is no mention here of the immediate flag, so one should be able to assume that
Apply Request Values is the phase in which the getAsObject method is normally executed.
Then there's there's this quote from Section "2.2.2 Apply Request Values":
Components that implement EditableValueHolder (such as UIInput), and
whose immediate property is set to true, will cause the conversion and
validation processing (including the potential to fire ValueChangeEvent events)
+that normally happens during Process Validations phase to occur during Apply+
Request Values phase instead.
How can it be that conversion "normally happens during Process Validations phase"
when a converter's getAsObject method is called called during the Apply Request Values
phase? Isn't that contradictory?

Creation of BP through Web UI.with Life cycle stage concept.

Hi,
I am working on Life cycle stage.
I have added the field " Life cycle stage" field in the Web UI.
But now when i go to create a BP with a life cycle stage XXX, it throws a error saying "BP category 1 does not fit the data in category 2" and "Data contains errors and cannot be saved"
Please help me in saving the BP thr web UI.
Regards,
Vinay

Hi Tariq,
I'm not sure if you have the latest SP - recently, a new BADI - BUPA_SET_DEFAULT was released which allowed defaulting of fields in the BAPI and Web UI scenarios. You can use that BADI to default the fields for country, name, and even other address fields on the Web UI.
If you don't have this BADI in your system, do search for SAP notes, which will also have the documentation about this.
Hope this helps you.
Regards,
Rishu.

Business Partner Roles and Account Life Cycle management in IC

Hi all,
We have IC agents creating prospects but also back office people (i.e. sales staff) creating prospects. Back office staff uses account life cycle management to identify the prospect role. However, I noticed that the business partner role (prospect in this case) is not visible within the IC - during account creation - because the role is used within the account life cycle role exclusion group.
I can always enhance the IC component to remove the filter on the BP Role. but question I have is why does SAP IC remove the roles from the role drop down list in the IC account creation screen and how did other people get around this?
Thanks,
John

I am also looking for an answer on this. How did other people who work on Interaction Center get around this? How do you create accounts when IC removes the BP roles mentioned in the Exclusion group config in SPRO ?

Product life cycle management in sap

Hi,
is there any prescribed material for product life cycle management (PLM) IN SAP? can anyone refer any institute name and where it is for learning SAP-PLM?

Dear heeru
Go through the links
[Life cycle profile|http://help.sap.com/saphelp_46c/helpdata/en/08/2b2c8c50c711d3b478006094b9d648/frameset.htm]
[Configuration Definition|http://help.sap.com/saphelp_46c/helpdata/en/74/7b601ac80811d3b4bc006094b9d648/frameset.htm]
Thanks
G. Lakshmipathi

Re: Life cycle in SAP BW

Hi gurus,
I am actually a newbie in looking for a job in SAP BW. Am more bent to put a 2-21/2 yrs experience since there's not place for freshers in UK industry, but most of the offers come saying either i should have a experience in full life cycle..could somebody explain how i could come over it
Regards
Sri

Hi ,
When they refer to the full life cycle its the ASAP methodology which SAP recommends to follow for all its projects.
1.Project peparation.
2.Business Blueprint.
3.Realization.
4.Fit-Gap Analysis
5.Go-Live Phase.
Normally in the first phase all the management guys will sit with in a discussion .
In the second phase u will get a functional spec n basing on that u will have a technical spec.
In the third phase u will actually inplement the project and finally u after testing u will deploy it for production i.e. Go-live .
U might fall under and get involved in the realization phase .
If its a supporting project u will come into picture only after successful deployment.
let us know if any queries .......
Regards --- Kumar Sarvepalli ........ Honor points

Using page life cycle (OnPageLoadBackingBeanB)class to update page controls

I used the onPageLoadbackingBeanbase class that exists in SRDemo to handle the page life cycle for my project ADF faces pages but found that the controls is null in all phases of the page
How can i use the page life cycle for dealing with the page controls like
filling selectOneChoice in the isPostback once not in every action or refresh
thanks

I sent this post 1 week ago and no response
please help
Message was edited by:
user560167

When open the jsp file in netbeans

if there is not pageEncoding="GBK",I save the jsp file and open it again,I find all Chinese is '???'. :(

When you use a non-ASCII page encoding the IDE cannot read the page encoding directive to find out what page encoding is used.
One solution is to put the encoding in the web.xml file.
To set the encoding in a web.xml file, you add a page-encoding element in the jsp-property-group whose URL pattern matches the file, such as in the following example:
<jsp-property-group>
<url-pattern>loginGBK.jsp</url-pattern>
<page-encoding>GBK</page-encoding>
</jsp-property-group>
If you are using NetBeans 3.5 you can right-click the node for the jsp file and choose Properties. In the Text ta of the properties sheet, you can set the encoding.

Adobe Life Cycle Designer doesnt show Context Data

Hi All,
I have a requirement where I have a add a new field to the adobe form . I am able to add the new field but when I try to Bind it with the Context I am unable to see any context in the Adobe life cycle designer can anyone please let me know how to do this .Thank you so much in advance.

[https://websmp103.sap-ag.de/swdc] goto this url and click on the installations and upgrade drop down to your left part of the screen --> then click on the search for installations and upgrades then type Adobe in the search box and press enter you will find all the Life cycle designer versions click on
[NW 7.0 Presentation - Adobe LiveCycle Designer 8.0] this software will be added to the download basket.
And you should have authorization for downloading the software your basis person should have access to the same..

Account life cycle in CRM 2007

Hello all,
maybe it is a simple question, but I don't find an answer yet.
How can I acctivate the account life cycle?? I found something about a config-tool, but I don't know what it is.
Thanks a lot.
M.Buchheim

Hello：
Because "The account life cycle is delivered as a hidden function and must be activated in the UI configuration tool"
SO how can I acctivate the account life cycle？Can you tell me?
How can I find 1097651 How to use the Account Life Cycle?
thanks!

Account Life Cycle

Hi folks,
I am little bit confused for the exact scenario and functionality of account life cycle. Although I know that Account life cycle is used to define the BP roles's stage.
I tried some scenarios:
1. I went to the BP Role Exclusion group setting and created two role in BP role Exclusion group one is prospects & second is sold to party. After this allow a permitted transition from prospects to sold to party.
2. Enable the life cycle stage.
After completing this configuration, I could see that Prospects and Sold to party BP role are missing from BP roles but that role could be chosen from life cycle stage.
Till yet, every thing was OK.
Then i created a prospect from Web ui by selecting the prospects role from life stage cycle.
Then i tried to create the opportunity transaction and quotation transaction from that prospects and system allowed me to create quotation document with that prospects number... In actual the system asks for a sold to party detail not prospects.
My 1st question is "As i did not convert the prospects into sold to party then Why the CRM system is allowing the entering a prospects into Quotation document?
2nd Question is: If it is allowing then Will it be possible to replicate the prospects into ECC system as sold to party role?
3rd Question is : Could any body give a practical scenario where this functionality can be used?
Even if i do not do any account life cycle configuration, I get the same result while creating the opportunity and quotation then what exactly is the use of account life cycle.
Thanks in advance.
Best regards,
Dinesh.
Message was edited by: Dinesh Sachdeva

Hi Nash,
Yes i know that there are many information available in SCN as well as sap help. I have read those information as well as i went on the sap note1097651 - How to use the Account Life Cycle.
As far as theoretical things concern, all the information were there.
But practically i could not get the solution of my problem that i mentioned in my earlier post.
Could you please let me know the actual behavior of the CRM system after configure the Account life cycle and why it is necessary?
Thanks & Regards
Dinesh

Account Life cycle status change

Hi All,
I have a requirement that goes like this : In the account life cycle status field on the Account screen i have some Custom BP Role statuses. I have to change this status after the User saves the account.
I am new to Web UI and i do not know where to write the code to achieve this functionality. I am assuming we should be writing it in EH_ONSAVE of the BPHEADOVERVIEW of BP_HEAD component. Can we use the PARTNER_UPDATE BADI for this ? or any other BADI/ User Exit that you suggest ?

Hi,
You can use two BADIs to achieve this either ORDER_SAVE(Implement the badi) and write ur ststus change code over here or
BADI - CRM_ORDER_STATUS(Implement the badi)
for status change use the below code to get it...
call function 'CRM_STATUS_CHANGE_EXTERN'
      exporting
        client              = sy-mandt
        objnr               = lv_order_guid
        user_status         = 'E0012'
        no_check            = 'X'
      exceptions
        object_not_found    = 1
        status_inconsistent = 2
        status_not_allowed = 3
        others              = 4.
    if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
hope this solves ur problem.
Regards
Jegadesh Balan T

Sequence of Elements in the JSP Life Cycle

Similar Messages

Maybe you are looking for