Serch help for list of currency key

Hi friends,
Can any budy tells me what is the search help to get list of currency key.
like
INR,
USD,
EUR
Thank you.
Regards,
Virat

Hi
1) Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
2) Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
3)An elementary search help defines the standard flow of an input help.
4) A collective search help combines several elementary search helps. The user can thus choose one of several alternative search paths with a collective search help.
5)A collective search help comprises several elementary search helps. It combines all the search paths that are meaningful for a field.
6)Both elementary search helps and other search helps can be included in a collective search help. If other collective search helps are contained in a collective search help, they are expanded to the level of the elementary search helps when the input help is called.
CREATION:
Go to SE11 Tcode
select search help
give the 'z' search help name and create
select the selection method ur table name eg : 'mara'
dialog module 'display value immediately'.
add the field whatever u want and lpos = 1 and spos = 1 and check import and export parameter.
where left position when displaying and spos = search position
and then save and activate ..
See the links:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee38446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee45446011d189700000e8322d00/content.htm
pls go through this for search help creation
http://help.sap.com/saphelp_nw2004s/helpdata/en/41/f6b237fec48c67e10000009b38f8cf/content.htm
Search Help Exits:
Re: dynamic values for search help
Re: Dynamic search help
Thanks
Ashu

Similar Messages

FRM-41009: Function key not allowed. Press %s for list of valid keys.

FRM-41009: Function key not allowed. Press %s for list of valid key.
What is reason for this message, and how can we suppress it. Where should I set the system.message_level to suppress this message.

The reason is you press a key that cannot be used, e.g. duplicate record cannot be used in enter query mode.
You cannot suppress this message, even with message_level 25. If you code this for key-duprec, you will still get the message:
:system.message_level := 25;
duplicate_record;Forms intercepts the error at a very early stage. Even this didn't suppress the message:
if :system.mode = 'ENTER-QUERY' then
null;
else
duplicate_record;
end if;

SQ01 help for listing not used problem codegroup and code in notifications

Hi ,
I am making a query through SQ01 to find out how many damage codes created for a particular notification type are not being used .
In infoset I used QMEL which lists problem code group and problem code and as a bonus we also get codegroup text . When I test this query , I get damage code group and code used in all the notifications . I want solution for the following
1)How to list only distinct damage codegroup and damage code (Not per notification wise)
2)Which second table I have to use to get problem code short text
3)Which table I have to add in infoset and how join has to be created so that I get list of Damage codegroups and codes not used in notification .
NPB

Hi Pete ,
1)How to list only distinct damage codegroup and damage code (Not per notification wise)
        I have output like
                  problem code group     Problem code grp text        Problem code    Problem code text
                  MRTR                           Transformer problems        1                        I need table here
                  MRTR                            Transformer Problem           1
                  MRTR                            Transformer problem         2
I need distinct output like
problem code group     Problem code grp text        Problem code    Problem code text
                  MRTR                           Transformer problems        1                        I need table here
                  MRTR                            Transformer problem         2
2)Which second table I have to use to get problem code short text
                I need problem code table
3)Which problem code group and code not used
            Suppose for notification type X I have configured damage catalog Q and Q has MRTR , MRAM , MRGT as code groups and each of them have their own codes (say 1 to 5)...If notifications are created only for MRTR and code 1 , 5
I need not used output like
MRTR 2
MRTR 3
MRTR 4
MRAM *
MRCT *
How can I achieve this using sq01,02 etc
NPB
Edited by: Narasimha Bhat on Feb 1, 2011 4:54 PM

Reg : F4 help for custom fields in ALV report

hi friends..
in my internal table i have fields including 1 custom field..
DATA : BEGIN OF i_final OCCURS 0,
pernr LIKE p0000-pernr,
begda LIKE p0000-begda,
plans LIKE ZPOSITION-plans, (custom)
werks LIKE pspar-werks,
end of i_final.
i want to display this i_final table in alv. for that i genetrate one fieldcatalog
PERFORM fcat USING:
                  'I_FINAL' 'PERNR' 'P0000' 'PERNR' '15' 'X' '',
                  'I_FINAL' 'BEGDA' 'P0000' 'BEGDA' '10' 'X' '',
                  'I_FINAL' 'PLANS' 'ZPOSITION' 'PLANS' '8' 'X' '',
                  'I_FINAL' 'WERKS' 'PSPAR' 'WERKS' '14' 'X' ''.
in custom table zposition, i maintain serch help for custom field "PLANS".
then i used reuse_alv_grid_display.. for all the std fields along wit custom fields
i got f4 all std fields but for my custom i am not getting the f4 help
how can i get the F$ help for this custom fields Zposition-plans..
plz give some idea

Hi
In that Ztable against the field
PLANS give the check table name as <b>T528B</b>
then it will automatically give the search help
or you can create your own search help(elementary) and add to that field
Reward if useful
regards
Anji

How to provide input help for a variant

Hi,
I have a parameter on the selection screen.
P_layout like disvariant-variant value check.
How do I provide input help for this parameter and also how do i check wheather the input entered is correct or not.

Hi,
You can create a serch help for the field and add it in program like:
P_layout like disvariant-variant match-code object 'Searche help name'.
then if you need to do any validation u can do it at selection screen:
like:
at selection-screen for P_layout.
if..conditions..
regards,

Amount formatting based on Currency Key

Hi,
I want to format the amount field on the basis of the currency key.
for eg.
Chile has the no of decimal places set as 0
so for Chile, the amount 800.00 should display as 800
Similarly for Mexico, the no of decimal places is set as 2.
so for Mexico, the amount 800.00 should display as 800.00.
I am using the follwoing statement
WRITE im_amount TO v_amount
                    CURRENCY im_waers
                    DECIMALS v_dec_places.
where v_amount is type char20 and im_amount is type netwr.
This is working correctly for Mexico but fails for Chile.
Please share your comments on this.
Thanks in Advance,
Binu

The following write statement gives the perfect result.
WRITE v_amount TO v_fmt_amt
                 decimals v_dec_places
                 no-grouping
                 left-justified.
I was not getting the result on using both the currency as well as Decimals addition. The desired result is obtained on only using the Decimals addition.
And I used the FM, 'G_DECIMAL_PLACES_GET' to get the decimals for the respective currency key.
Thanks a lot for your response.
Regards
Binu

Saerch help for Date field on Modal Dialog box

Hi ,
I have made a screen of Modal Dialog box type . I have one date field on that screen . I have given datatype datum to that field but the serch help for that field is not coming . There is no search help for that field .. Please help..
Thanks in advance....

hi,
in the pop up box for that field just checjk whether the data type is date.

F4 help values for currency key field in table

Hi all,
I have added currency and currency key fields in my Z table. For the curreny key field, i have assigned the standard data element WAERS. I have implemented Table Maintenance Generator for my table. But the F4 help values for the currency key field is not appearing when i tried to maintain table entry.
Should i need to check the Foreign key check box for the field attribute? But this check box is in disable field in screen layout.
Could someone tell me how to solve this issue?

Hi,
Make the check table of the currency field of your Ztable as TCURC,which is the master table of Currency.Inside the domain of the field you write the TCURC as a value table.and make foriegn key relationship with the TCURC table.
Regards,
Suvajit.

Currency key for amount of zero

I load an ODS and have an amount assoociated to 0currency. When the amount is zero, the currency key is not loaded into ods even though there is a key in source?

Check the update rules for the object as well as the start routine for any restriction on Zero amount.
Hope this helps.
Bhargava

Defining currency key for currency type

Hi
I have to define the currency group in the controlling area as 30 (Group Currency). There are three company codes which have to be assigned to this controlling area. However, the system is not accepting the same and giving an error message " Difference in currency INR does not match SGD".
Similarly while defining another currency in company code, for currency type 30, the system is giving an error message, "Currency Key no defined for Group currency". Pls help
Regards
Sanil Bhandari

> Hi
>
> You can reward points too with thanks.
>
> Regards,
> vivek
Hi
I have already ticked the check button for problem solved which carries the maximum 10 points for the same to you
Regards
Sanil

Help for search help and currency and quantity fields

hi,
please help me for creating search help and when the currency and quantity fields are used please expalin this with steps as i am a learner..
regards
raj.

Hi Rachu,
Welcome To SDN
Help On Search Help
Go to se11
Select radio button Search help
click on create
and select elementary seacrh help
selection method---->tablename or viewname
press f1 in search help exit we will get a FM named as
F4IF_SHLP_EXIT_EXAMPLE.copy that FM from se37 in to Zprogram.we have a record_tab for copying the view by using this tab we can restrict the values from the view or table.this values are populate into another table .Then ,
come to se11
and in our seacrh help we will pass components of the search help
Source: https://forums.sdn.sap.com/click.jspa?searchID=14985345&messageID=5618016
Help On Currency and Quantity Fields:
Whenever you have to maintain fields for currencies and quantites u need to refer them to currency key and quantity key which also have to be present in the table.
If suppose you are creating a table for Employee. And suppose that fields would be like :
EMPID -
employee id
EMPNAME
employee name
DEPARTMENT --- department
SALARY -- salary ( Data Type u2013 CURR )
WEIGHT -
weight of the employee ( Data Type -- QUAN )
Now the fields SALARY AND WEIGHT fields should refer to currency and quantity keys. So you need to have two more fields like
CURRKEY --- Data Type ( Cuky )
Quantity --- Data Type ( Unit )
Now we have to attach the field Currkey to the field Salary
And the field Quantity to the field Weight
So when u create a table you can see a tab Currency / Quantity fields.
Here You can give the reference table and the reference field against the salary and weight fields.
Source: https://forums.sdn.sap.com/click.jspa?searchID=14985456&messageID=5692074

How to Enhance search help for product groups. Currently no ability to add multiple lines from result list

Hi All,
In CRM Web UI, there is no multi selection option for product group id f4 help for Custmer event creation or edit screen under “Product” tab=> Product Group ID field.
Web UI Component Details -
UI component : TPMOE
View : TPMOE/ProductEOL
Context: PRODUCT Attribute : -PRODUCT_GRUOP
Click on Product Group ID field then below F4 Help screen appears.
In the product group results list, user can select only one row and Then all the product will be queried for selected product group, transferred to product list tab.
Current technical design for Product Group F4:
a) SE11 Data Dictionary search help “CRM_MKTPL_PGRP1” is used and data is fetched displayed based it( Refer method GET_V_PRODUCT_GROUP of context node class CL_TPMOE_PRODUCTEOL_CN00)
b) In UI, F4 pop up is handled by UI Framework in SAP generic manner so no multi selection is allowed.
c) A round trip event is triggered after selection of row from results which reload view with queried product result based group selected.
Requirement :-
In the product group F4 results list View, user should be able to select multiple row .As SAP GUI has the option of multiple entry selection from search help window with the help of field called MULTISEL.
System should query for products with all selected product group, transferred to product list tab.
Note: - The multi select options works fine for GUI, but for UI standard SAP code ignores this or never is this structure taken into consideration. Standard class to display F4 help on UI is CL_THTMLB_F4HELP.
Can we enforce same behavior like DDIC search help in Web UI too Or suggest how we can achieve this requirement?
Thanks in advance
Regards,
Arjun

Hello All,
We have achieved this requirement by Custom development and approach followed as -
Define UI object model zprgrp & zprgrpquery and object relationship in table ZCRM_OBJTAB
Query Strcuture : ZCRMST_PRGRP_SEARCH & Result List structure : ZCRMST_PRGRP_RESULT
Created Custom component : ZPRGRP with Search /Result view and with GENIL Class, search logic
Defined custom ComponentUsage “ProductGroup1SearchHelp” for ZPRGRP in Standard Component TPMOE
e. Called F4 application for field product _group with help component usage created in step d.
Regards,
Arjun

Can we provide new f4 help for a field in a list using grid display

Hi Gurus,
Can I provide F4 help for field in edit mode for (which is not using any std. data type, uses only custom char field ) in the list displayed using CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'.
I know this can be done using OOPS concepts but, I need to know whether it is possible in this manner.
And please dont suggest me to use CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE' to get automatic f4 help.
I need to provide F4 help with my own logic once I press F4 in the edited field in GRID_DISPLAY
Regards
Mac.

Hi Macmohan,
You have to use F4AVAILABL attribute of fieldcatalog to achieve this.
lv_fldcat-f4availabl = 'X'.
lv_fldcat-ref_table = 'T582A'.
lv_fldcat-ref_field = 'ZEITB'.
This works with ALV GRID CONTROL
Regards
Abhii
Edited by: Abhii on Dec 16, 2009 3:37 PM

How to get F4 help for Standard Text Key of a operation based on Order type

Hi Experts,
How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
Thanks in Advance.
Regads,
Bujji

Hi Guys,
Any help on this...
Regards,
Bujji
Edited by: Bujji on Dec 22, 2008 12:42 PM
Edited by: Bujji on Jan 5, 2009 2:00 PM

Need help for access list problem

Cisco 2901 ISR
I need help for my configuration.... although it is working fine but it is not secured cause everybody can access the internet
I want to deny this IP range and permit only TMG server to have internet connection. My DHCP server is the 4500 switch.
Anybody can help?
         DENY       10.25.0.1 – 10.25.0.255
                          10.25.1.1 – 10.25.1.255
Permit only 1 host for Internet
                10.25.7.136 255.255.255.192 ------ TMG Server
Using access-list.
( Current configuration )
object-group network IP
description Block_IP
range 10.25.0.2 10.25.0.255
range 10.25.1.2 10.25.1.255
interface GigabitEthernet0/0
ip address 192.168.2.3 255.255.255.0
ip nat inside
ip virtual-reassembly in max-fragments 64 max-reassemblies 256
duplex auto
speed auto
interface GigabitEthernet0/1
description ### ADSL WAN Interface ###
no ip address
pppoe enable group global
pppoe-client dial-pool-number 1
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
interface Dialer1
description ### ADSL WAN Dialer ###
ip address negotiated
ip mtu 1492
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password 7 xxxxxxxxx
ip nat inside source list 101 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.25.0.0 255.255.0.0 192.168.2.1
access-list 101 permit ip 10.25.0.0 0.0.255.255 any
access-list 105 deny   ip object-group IP any
From the 4500 Catalyst switch
( Current Configuration )
interface GigabitEthernet0/48
no switchport
ip address 192.168.2.1 255.255.255.0 interface GigabitEthernet2/42
ip route 0.0.0.0 0.0.0.0 192.168.2.3

Hello,
Host will can't get internet connection
I remove this configuration......         access-list 101 permit ip 10.25.0.0 0.0.255.255 any
and change the configuration ....      ip access-list extended 101
                                                            5 permit ip host 10.25.7.136 any
In this case I will allow only host 10.25.7.136 but it isn't work.
No internet connection from the TMG Server.

Serch help for list of currency key

Similar Messages

Maybe you are looking for