Serial-Buffer overflow without too much incoming data or bursts on the line

My application runs under LabView 5.11 on a W2000 platform.
After a couple of hours trouble-free working, the sub-vi "bytes at serial port" gives out 57351 Bytes. That is 56k + 7Bytes, which is the normal Datablock coming in at the port.
Effect is that the "serial port read-vi" and as result the complete application hangs up.
I have allready found out that this data set does not arrive at the port.
Could this be a problem of LabView 5.11 running under W2000?

I would first urge you to disconnect the cable from the serial port and let it run more than long enough to convince yourself the error goes away or re-occurs.
If you disconnect, and the error still occurs, your port hardware may be bad. Try another port or PC.
If the problem goes away, you could have noise on the line (interference, bad ground, bad conections, excesive long cable, etc, etc) or,
your code is not coming back to read the port often enough. If you think this is the case, read from the port more often or use hardware handshaking.
I would like to know a lot more before saying it is a software in-compatability issue.
Keep us updated,
Ben
(An LOTR fan)
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Yosemite OS is consuming too much internet data in the background

Yosemite OS is consuming too much internet data in the background for no apparent reason. It's draining my monthly internet quota. It's important to note that iCloud Drive and photo stream are disabled. Anyone knows how to sove this problem? Otherwise, if there's no solution I think I'll downgrade to Mavericks.

I'm wondering if you ever resolved this issue. My internet access is via satellite with highly allocated data usage. Ever since updating to Yosemite, my usage has gone through the roof. I've disable automatic downloads and any settings (including iCloud photo stream) that might receive or send data, plus I never use Spotlight. Data usage goes to zero when I shut off WiFi, so it seems obvious that something running in the background is the culprit. Apple is looking into this, with no results so far - meanwhile, I've lost hours of time playing detective, and hoping my ISP won't cut me off. No fun!
Thanks for any ideas you have...

I have a 27" iMac with a broken hard drive. Is there a way to convert the existing hardware into a display monitor without too much technical work?

I have a 27" iMac with a broken hard drive. Is there a way to convert the existing hardware into a display monitor without too much technical work?

You don't state what iMac it is or what you want to use it for an external display with so we cannot answer the question. But without a bootable drive, no you cannot. However you can get the internal HD replaced or you can connect an external HD and boot from it. Without some basics about the computer it's impossible question to answer. However you may find what need in Apple's Target Display Mode: Frequently Asked Questions (FAQ)

I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money? Does it have a line in and how do you monitor sound? Will I need adaptors and a interface?

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

In the closure of Adobe, the process remains active and takes too much resource processor. Expected results:The process AdobRd32.exe has to be correctly closed.

In the closure of Adobe, the process remains active and takes too much resource processor.
Expected results:The process AdobRd32.exe has to be correctly closed.

I'm not sure on a Mac, but when I have this issue, I simply kill the thread (task-manager/processes/select the process, kill thread)
I have had no ill effects doing this.
It is my belief, it is the cloud, since they have a dcc connection, you can disconnect from the cloud, close everything, and the cloud is still connected to you. This is a feature of their update process I suppose.(speculation) Additionally, I remember reading somewhere this issue was due to applying administrative permission at the instigation of the installation. (which I do allow *some* trusted companies to have this so updates can be applied during my downtime. )
I have never had any overt issues after killing the thread and I have done that many times.
Hope this helps

Too much contrast, I can not see the light pantone on Illustrator

Since a few days my screen is too much contrast, I can not see the light of pantones Illustrator

Check the "Enhance Contrast" slider in Accessibility or Universal Access system preference.

Im currently looking for bonzi buddy or any type of AI avatar that can speck cause im studying to become a EMT an the terms are too much.wanted to study listening to the terms on my ipod while im on my way to school.

im currently looking for bonzi buddy or any type of AI avatar that can speck cause im studying to become a EMT an the terms are too much.wanted to study listening to the terms on my ipod while im on my way to school

These are tech forums for people using iMacs and experiencing problems. Frankly, I'm not sure what you are looking for (use of punctuation and spell checker is helpful as well), but if it isn't related to a Mac, you might try to post in a different forum.

Serial port vi taking too much time to communicate?

i am using visa vis for serial communication the read vi takes too much time to give me the bytes at serial port.what should i do to decrease the delay?

You wouldn't happen to be specifying a byte count to read or setting read termination when a specific character is read would you? If you are, if you don't have the right number of bytes in the serial buffer or if the termination character is not seen, then VISA read will wait for the time specifed by the VISA timeout value. To fix the first problem, use the VISA Bytes at Serial Port function to determine how many bytes to read. In the second case, use a VISA property node to set Message Based Settings:Termination Character Enable to false and Serial Settingserial End Mode for Reads to none.

Too much meta data when importing to Flickr

I've noticed that when I export a photo directly to Flickr it seems to carry with it a TON of useless meta data. It happens when I use the Flickr export plug-in as well as updating to Flickr from their site. Here is an example of too much data (basically everything after Compression):
http://www.flickr.com/photo_exif.gne?id=108281029&context=set-1648131
If I retouch the photo in Photoshop then everything below image length is not include (which is my preference). Here is an example:
http://www.flickr.com/photo_exif.gne?id=111724050&context=set-1648131
Has anyone else experienced this? Has anyone been able to change this function? Thanks!

I have not used my EOS-M for video but the GoPro 3+ Black files import with all Metadata intact.

Switching MBPs - Can I swap SSDs without too much drama?

Hey Guys - ok, I know this is totally noobish, but I am switching from my existing MBP (2010) to another MBP. Question is, would I be able to just pull out my existing SSD from the one MBP and put it in the new one and not skip too much of a beat?
To add some color, I am switching from a MC847LL/A unit (i7 2.8Ghz, Nvidia GT330M, etc) to a new generation MBP (quad core i7, AMD Radeon GPU, etc). So, as I am a recent convert from the PC world, I know with the nuances with drivers and the like, it would be more beneficial to do a clean install, but didn't know if that is the case with Macs and MBPs.
Guidance and feedback is most welcome. Thanks for your support and patience with my questions.

Unless the to machines are identical hardware configuration no you should not simply switch SSDs as the build for each is slightly different. Some have had OK success doing this but most run into problems. IMHO the easiest way to do it is to Clone the SSD onto and external HD using SuperDuper or Carbon Copy Cloner, this creates a bootable clone. Then move the SSD into the new machine and reformat it using the Install Disc that came with the new machine. Then do an install of OS X from the Install Disc onto the SSD and finally use Setup Assistant to migrate from the external HD to the freshly formatted SSD. Here are instructions on Setup Assistant.
http://web.me.com/pondini/AppleTips/SetupAsst.html
Roger

HT4101 my camera says check connected device. USB device uses too much power. I have got the photos on before with persistence but this is not working

help

Is the USB drive you are trying to connect a USB thumb drive or a USB hard drive?
I have 4 USB thumb drives - an old one at 250MB, newer ones at 1GB and 4GB, and a new one at 8GB. All work in the camera connection kit except the 250MB (requires too much power). Suggest you get a new USB drive.
Use your camera's SD card.
Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

My high school aged child is spending too much time on Facebook, Tumblr to the detriment of home work. Is there any way I can limit the access to these sites to between 8pm and 10pm?

My high school aged child is spending too much time on Facebook and Tumblr is there any way I can limit the access time on these sites to from 8pm to 10pm?

System Preferences>Parental Controls has time limits - check out this intro to Parental Controls from Cult of Mac on YouTube.
Clinton

Entering description of event into iCal, pasted too much text into event, responded with The server responded with an error. Preferences is greyed out, and window pop up comes up every time I open iCal and doesn't go away. Force quit, still opens. Help?

While pasting event description into iCal, accidently pasted too much text, causing "The server responded with an error" pop up. This pop us includes the event description, but because of the mass amount of text, the window shoots off the screen to the bottom, so if there was an exit red "x" available, it isn't visible or accessible. The iCal>preferences is greyed out and I have force quit and it pops up each time I use iCal. Is this even fixable?

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

I try to connect to my apple ID via messages beta but it take too much time to respond, what is the problem?

pls help

Ok,
When I Set up my Messages Beta it asked me for an Apple ID when I launched the App for the First time
I did not get the sense that there was any other way to proceed at this point without an Apple ID.
Are you saying that you did manage to get Messages to Start without entering an Apple ID originally and you now want to Add One ?
Or since it failed the first time Messages beta will still start now but does not have an iMessage account ?
Or are you trying to Change the Apple ID that is in use ?
EDIT>
I tried to Delete my Apple ID iMessage account and it cannot be done.
I can take It Off line (Deselect "Use this Account") but the minus Button is not highlighted for the Apple ID itself in the righthand pane or the iMessage Account when highlighted at the bottom of the list.
It seems to the only way to change a name is to add the new Email style ID and delete the old one.
9:13 PM Saturday; March 24, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)

Foreign trade data is incomplete for the line item eg 70!

Dear Sapients,
I have encountered an issue related to invoice while releasing it to accouting.
The invoice is done for several line items but the problem is faced for one line item only, could any one suggest the possible solution please.
Regards.
Kodali

hi
Read the following SAP note. This can also be the case.
Note 354222 - Foreign trade data incomplete for domestic business
Symptom
A billing document cannot be transferred into accounting because the foreign trade data is incomplete.
However, the underlying business process is a domestic business!
Additional key words
VF01, VF02, EIPO, EIKP, foreign trade, incompleteness, domestic, delivery, billing document, EXNUM, EXPKZ,export indicator, export number
Cause and prerequisites
In the respective delivery or in the billing document, for domestic business you by mistake go to the foreign trade data into a field. Since the incompletion log requires at least one entry for foreign trade, you must fill one field in order to be able to leave the foreign trade data again without canceling document processing.
Here, an export indicator and an export number is assigned which cause the incompleteness of the whole document due to missing export data.
Solution
A solution in the standard system is currently not planned since because of various customer requests the foreign trade data in the delivery should be accessed and maintained for domestic business too. An example is the inbound delivery in a bonded warehouse where the forwarding agent should get information already in advance.
To avoid incorrect billing documents, proceed as follows:
Copy data transport routine 001 to a routine 601 and enhance the new routine according to the attached correction instruction (RV60C601). Store this new data transport routine in Customizing for the copying control for billing documents for the processes you use, for example
F2 - LF, item category TAN. (delivery-related)
If you already use an own data transport routine, in this data transport routine include the attached source code.
You must cancel existing billing documents and then create them again.
If you do not want to cancel existing documents, implement the attached correction (program RV60AFZZ) and release the documents either individually (VF02, default transaction) or via the list of blocked billing documents (VFX3).
After you completed the correction, you should cancel this solution (RV60AFZZ) again.
Also refer to the attached Note 170183.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 16.02.2005 17:15:20
Priority: Recommendations/additional info
Category: Consulting
Primary Component: SD-BIL-GF Basic Functions
Secondary Components: SD-FT-PRO Basic Functions
SD-BIL-CA Account Assignment

Serial-Buffer overflow without too much incoming data or bursts on the line

Similar Messages

Maybe you are looking for