Serial Number List Consumption

Hello,
I have a list of serial numbers for a particular part/material. I need to check that these serial numbers have been consumed. My first guess was to use MB51 to check the movement type (ideally 261 indicating consumption for order). However, material documents are listed instead of individual serial numbers. So, I have to look inside the material document for the desired serial numbers. When I check for serial numbers associated with the material document, I find that many have the 261 movement type. However, that result does not always transfer to the material document.
Ultimately, I would like to input a range of serial numbers for a particular material/part. The output would be a list of those serial numbers with the corresponding movement type or some other information that would indicate consumption. Is there a particular command that would provide this result or something close to it?
Please keep in mind that this is my second week using SAP, and have had little to no formal training. I've tried searching for this issue, and that search is how I came across the MB51 command.
Any help would be greatly appreciated.

Hello,
There is no direct report for this requirement i guess.I tried with IQ09 with material/serial no input.Specify "status included" AVLB in selection-general Data. it shows me 261 relevant serial no's.So you can check this.
Regards,

Similar Messages

  • IW8W - Serial number list not appearing

    Hi,
    We are using refurbishment scenario with serialised material.
    In iw8w the system asks me to enter the serial number but there is no option for entering it.
    Then we tried the following,
    While creating the refurbishment order, we entered the serial number by clicking on button "Object" and also noted down the reservation number.
    Then when we do MB11, we enter the order number and the reservation number. But the system does not show any serial number. (If we manually enter the serial number which we entered in refurbishment order, the system just gives a warning message saying the stock data is not suitable for movement) Then in IW8W, i can see the serial number list.
    My question is, why the system is not showing me the serial number in MB11?
    is any config setting missing.
    I am using the material with valuation type C3 (Bad) and status as ESTO(in w/h).
    Please suggest.

    Dear Vijay,
    To make appear your list of serial no while  doing goods recipt at IW8W
    There is a small configuration in the  Plant Maintenance i.e.  Functions and setting for order type-> Goods Movement for Order Type.
    Now Pleae check the check boxes for planned goods issue, Un planned goods issue, goods receipt for refurbishment . then it will work.

  • Has anyone else had issues with the serial number listed under MyAdobe not working?

    Trying to re-install CS4 to work on something, and when I downloaded the installer and unpacked it, it rejected the serial number listed on my MyAdobe page for the CS4 Master collection. Is there another number somewhere I should be entering or something?

    IF you are sure you are downloading the correct suite, you need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here are links to a page with options to help make contact:
    Serial number and activation support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html
    http://adobe.ly/1aYjbSC

  • Serial number listing

    Dear all,
          In our company we operate with serial numbers. Before PGI in delivery we attach the serial numbers after picking. On picking serial numbers in delivery when I goto serial number selction similar to IQ09 screen I need the plant and storage location mentioned in the delivery document to come as default so that the respective serial numbers will only be listed.
    Please guide me is there any way for the above requirement.
    Regards,
    Balaji.V

    according to Apple:
    +iWork '09 retail boxes no longer come with a serial number. Install iWork '09 from the enclosed disc and you're ready to go.+
    +Products Affected+
    +iWork '09+
    +Though retail versions of iWork '09 no longer come with serial numbers, you will need a serial number if you are using the iWork '09 trial version and decide to purchase the fully-functional version of iWork '09.+
    +To upgrade to a fully-functional version of iWork '09, open any of the trial applications. Click the "Buy" button and enter the requested information. An email will be sent to you with the serial number you need to upgrade.+
    +Note: If you are using the trial version of iWork '09 and then purchase a retail box, you will not need a serial number. Install iWork from the disc that came with your retail box to begin using your fully-functional version of iWork '09.+

  • Audition 3.0 will not accept the Serial Number listed on Adobe site says it's wrong

    I have tried putting in S/N every way I can think of and Number will not be accepted.  I am running Windows 8.1

    Did you download the version of Audition from the same place that you got the serial number? If you are still using a version of AA3 that you installed previously then the serial number from the link from the Activation Server Discontinued site won't work.

  • My serial number is not listed on my "products" in my account.

    I purchased Lightroom on January 28th online and received a confirmation email (which I still have) but there is not a serial number listed in the email or on my account. I went back to make sure I didn't receive any emails with a serial number but there is none. Any help to recover where my serial number is would be appreciated.

    The Products area can take some time to load after the page comes up so wait a minute or two and/or try a new browser in case there's something wrong with the JavaScript that serves the page.  This is a user-to-user forum so there's nothing we can do as users other than give you a hint as to where to look for things on Adobe's site, which you seem to know, already.
    If there is really nothing listed under your Products or your Orders or whatever the page sections are called, now, then I'd suggest you talk to Adobe, directly via Chat, which you can get to by starting on the Contact Us page and then indicating what products, problem area and problem you're having:  http://helpx.adobe.com/contact.html
    You do have to have purchased the products using the same AdobeID (e-mail) as you're logged into Adobe with when trying to view the orders and products.

  • Where do I find the serial number for my macbook pro

    My computer told me I was infected with 6 bad viruses.  An apple mac protection package wants me to sign up to get rid of these viruses.  The mac protection package is asking me for a serial number for my mac. I give it the serial number listed in my apple information but it says it is the wrong serial number.  Where can I get the serial number so mac protection can clean up my macbook pro??????

    It sounds like what you're seeing is a malicious pop-up on the web. Do you have anti-virus software of some kind installed? If not, note that that's the only thing that can scan your computer for malware. A web site cannot do that, but it's trivial to display a pop-up in your web browser that looks very official, telling you viruses have been found and that you need to install their software to remove them. That's a classic malware trick... the software the pop-up wants you to install is the malware.
    Can you provide a screenshot of the window warning you that you have malware? Press command-shift-4, then the space bar, then click the window. The screenshot will be placed in a file on your desktop. Add it to a post here using the camera icon in the post editor's toolbar. (Don't drag it into the post or copy and paste it... that will appear to work for you, but we won't be able to see it.)

  • Invalid serial number error message when installing Acrobat 7

    I have my original software CD and serial number but understand that I need to use the downloaded program because Adobe no longer supports the activation code required for installing from the disc.  I was under the impression that I was to use the original serial number.  This is what I used when reinstalling my CS2 Photoshop  in the same circumstances.
    I downloaded 22001904.exe and ran it but when it gets to the serial number I receive invalid serial number message no matter how I enter the number.  I even tried cutting and pasting from my Adobe profile, since I have registered the program w/ Adobe previously along with other Adobe programs.
    Can you advise me how to proceed? 
    Sincerely,
    brokripananda

    no, use the serial number listed on the page where you downloaded acrobat 7, not your acrobat serial number

  • Apple put the wrong serial number on my replacement MBP invoice

    Hi all.
    In short - I purchased a MBP early 2011 which I needed to return for replacement 3 days later. This was done on the spot and a replacement invoice was to be emailed to me. I purchased AppleCare with my original MBP and I was told that this would automatically transfer and be registered with my replacement model. I must say I was pretty impressed with the speed and hassle-free nature of the service (for my first ever Mac as well).
    Unfortunately, I have just checked the status of my Apple Care and noted that it was listed as expired !!!
    Doing my research, it appears that on the invoice for the 'replacement' unit they sent me, they listed the original (faulty unit) serial number for both the unit that was returned, and the replacement unit. This was obviously an error because they gave me a brand new unit in a new box and I am typing on it right now. I also noted that they 'returned' my old AppleCare Agreement and applied a 'new' AppleCare Agreement (with new agreement number) but it has the returned MBP serial number listed (not the new one) !!!!!
    I am looking for suggestions on how to get this rectified for the following reasons:
    - I need my Apple Care that I paid for to be applied to the correct unit
      - I need my current Apple MBP to be registered to me as the owner (I have no idea who they would have it registered to at the moment given the invoice is incorrect .........)
    I look forward to any advice you might have, and suggestions as to any problems I might expect in dealing with Apple.
    Regards,
    Tim

    (800) APL-CARE (800-275-2273).
    They should be able to straighten things out - be sure that you have all your paperwork together (old sn, new sn, receipt - if you have it - etc.).
    Good luck,
    Clinton

  • Serial number transaction report

    Hi,
    Where do I find Serial number transaction report?
    Do any one know t.code or program name?
    I am unable to locate following menu path,
    Inventory >>> Inventory Report >>> Serial Number Transaction Report
    Please some one guide me.
    Thanks and Best Regards,
    Mohan

    Try using tcode OIYH: Serial Number List
    Thanks & Regards
    JP

  • Acrobat 9 - Remove Serial number for image?

    Hi all,
    We are purchasing Dell PCs with OEM installations of Adobe Acrobat  Standard 9.  I am attempting to create an  image based on one of these machines, but I want to remove the Acrobat  Serial number, so when I push this image onto another machine, I can  enter the proper serial number for that machine.
    I know you can go into the registry and change the serial number, so I  tried to just delete the value from there.  However, when I did this  and start up Acrobat, it runs through the installation and the previous  serial number is back in it's place.  I found the serial number listed  in a "Repair" key as well and when I delete it from there, I have the  same result, with the exception of the registry values for the serial  number remain blank.  Surprisingly, Acrobat works fine even though it  appears (at least in the registry) that there is no serial number  associated with it.
    Can anyone help with this?
    Thanks!

    Can anyone help here?
    I've downloaded the Adobe Customization Wizard and set the user name, company name, etc. and left the serial number blank.  When I attempt to run an unattended installation, it fails with a dialog box that simply says "error."
    I changed to an interactive install to see if I could get any more information on when and where it was failing.  User and company name are filled in, as expected, but Serial Number is blank and I cannot advance without entering a Serial Number.  I assume this is also why the unattended installation is failing.
    How can I install without a serial number, so that I will be prompted for that upon first launch?

  • HT1349 help!  Apple does not recognize my serial number

    I have an imac that I purchased a little less than year ago and today decided to purchase apple protection plan.  As I was trying to enter my serial number listed on the bottom of my imac, I was given an error message stating apple does not recognize my serial number.  I double and triple checked making sure I entered everything correctly, including going into "about this mac" from the pulldown menu and copying and pasting the serial number that way but STILL it is not recognized... tried to contact customer service but it went dead after being on hold several times so I tried using the email method but can't submit my question because..... you guessed it, my SERIAL number is incorrect and NOT recognized.  Anyone have similar issues?  help!

    Have you contacted the vendor or seller from whom you purchased the computer?

  • Serial number won't work with Acrobat 7.0 Pro

    I'm trying to re-install my Acrobat 7.0 Pro on a new computer (Win 8.1) after a major crash. I successfully downloaded the new .exe file but installation won't accept the serial number listed for the download.

    Moving this discussion to the Acrobat Installation & Update Issues forum.

  • Registration does not recognize my serial number for new iPad

    I have tried multiple times but it says product serial number does not exist

    Tccriv-
    Go to Settings-General-About and see if there is a serial number listed.
    You may have a defective iPad.  I suggest you show it to an Apple Store Genius.  If the Genius agrees, you may get a replacement on the spot.
    One thing you can try is to reset (reboot) your iPad.  Hold both the Home and Sleep buttons for several seconds until the Apple logo appears.  Ignore the "Slide to power off" arrow.  The iPad will restart after a couple of minutes.  Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
    Fred

  • HT2589 how to find my serial number in itunes

    I do not have my ipod with me & need to locate the serial number thru Itunes

    or try this if you're from US or canada:
    Online at My Support Profile
    If you used your Apple ID to register or purchase your iPod, you may find the serial number listed in My Support Profile (available in the United States and Canada). Log in with your Apple ID and find your iPod in the "My Products" box on the main page:
    Note: You may have more than one Apple ID and not realize it. For more information, visit My Apple ID and click "Find out."

Maybe you are looking for

  • In portal branding change the font colour of the popup dialog box

    hi all, I created  a theme of mine and changed the portal body colour to a dark shade. The porblem i am facing is..whn i click on the "Logout" button of the portal,it displays a popupbox saying "Are you sure you want to logg off?"...i want to change

  • Is there an easy way to batch process channel swapping?

    I'm creating a IR time-lapse, and I need an easy/effective way to swap the red/blue channels and do a few other things in Photoshop before I transfer the work to Lightroom to finish. I know that you can batch process for resizing and whatnot, but it

  • How do I create a network to pair with iPhone?

    I am trying to use the third party app "remote" and I can't get my Mac and iPhone paired. My contacts, mail, photos and music are synced perfectly via "mobile me" Where do I find the network name?? Thanks in advance.

  • What is the standard on using some jsp tags?

    Has it become an industry standard to not use scriplets, expressions and declarative tags in jsp or is it all dependant on the scale of the application and the preference of the developer. I have seen the arguments for not using these tags and while

  • Delivery quantity need not be exceed, After creating STO-PO in TCODE  VL02N

    Hello Gurus,, Greetings!!!! Tcode- VL02N... While we do PGI / SAVE after the changing the delivery quantity in Tab "Picking", it need to be checked that delivery quantity not be exceed then quantity entered while STO PO has been created for that part