Serialization in bpm
Hi
If I am not wrong searialization means sending the data in the same order as they were received. This can be achieved by using EOIO. If it is the case could you please tell me when will we go for BPM with serialization ?? I believe for serialization alone we won't go for bpm and along with that there may be a need of another functional requirement ...........then only we will go for bpm.
Please correct me if I am wrong.
thanks
kumar
Hi,
Many adapters support the Quality of Service as Exactly Once in Order. (EOIO ). All thise adapters that support this QOS support EOIO without a BPM.
Refer this link for more,
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
Also, even if your want EOIO inside a BPM , in the send step of your BPM you need to porvide the Queue Name for all messages using the send step to be processed in EOIO.
See defining Quality of Service (EOIO ) in this link.
http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm
Regards
Bhavesh
PS : You have multiple open threads. Close the threads, awar points for helpful answers and make SDN a clean place.
Similar Messages
-
Hi,
I'm using Oracle BPM studio 10g R3. (Version: 10.3.1.0 Build: #99576)
I'm trying to use DynamicXML to serialize and de-serialize a BPM object. I'm able to convert the object into XML, but the reverse doesn't seem to work for me :
TestObj test = new TestObj();
test.x = "test1";
test.y = "test2";
String str = DynamicXml.createXmlTextFor(object : test, topLevelTag : "Test");
this.log(message : str);
This gives me :
<Test xmlns="http://bea.com/albpm/DynamicXml/version/2.0">
<x>test1</x>
<y>test2</y>
</Test>
But when I try to use DynamicXml.createObjectFrom to parse the xml back into an object, I get an error :
TestObj test2 = new TestObj();
test2 = (Module.TestObj)Fuego.Xml.DynamicXml.createObjectFrom(xmlText : str, target : test2);
fuego.lang.ComponentExecutionException: The method 'createObjectFrom' from class 'DynamicXml' could not be successfully executed.
at fuego.lang.ObjectTypeDescription.invokeMethod(ObjectTypeDescription.java:1389)
at fuego.lang.MethodTypeDescription.invoke(MethodTypeDescription.java:1249)
at fuego.compiler.Invoke$MethodCall.run(Invoke.java:1499)
at fuego.compiler.Invoke.runCall(Invoke.java:789)
at fuego.compiler.Invoke.run(Invoke.java:773)
at fuego.compiler.Node.value(Node.java:2225)
at fuego.compiler.Node.value(Node.java:2259)
at fuego.compiler.Conversion.run(Conversion.java:724)
at fuego.compiler.Conversion.run(Conversion.java:716)
at fuego.compiler.Cast.run(Cast.java:130)
at fuego.compiler.Node.value(Node.java:2225)
at fuego.compiler.Node.value(Node.java:2259)
at fuego.compiler.Assignment.run(Assignment.java:285)
at fuego.compiler.Block.run(Block.java:323)
at fuego.compiler.DoBlock.run(DoBlock.java:574)
at fuego.compiler.Method.run(Method.java:999)
at fuego.compiler.FuegoInvokeable.invoke(FuegoInvokeable.java:436)
at fuego.component.Message.process(Message.java:585)
at fuego.component.ExecutionThread.processMessage(ExecutionThread.java:780)
at fuego.component.ExecutionThread.processBatch(ExecutionThread.java:755)
at fuego.component.ExecutionThread.doProcessBatch(ExecutionThread.java:142)
at fuego.bpmunit.SuiteCompiler$1.processBatch(SuiteCompiler.java:137)
at fuego.component.ExecutionThread.work(ExecutionThread.java:839)
at fuego.component.ExecutionThread.run(ExecutionThread.java:408)
Caused by: java.lang.NullPointerException
at fuego.type.FuegoClass.forName(FuegoClass.java:157)
at fuego.type.FuegoClass.forName(FuegoClass.java:94)
at fuegoblock.xml.DynamicXml.createObjectFrom(DynamicXml.java:158)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at fuego.lang.JavaClass.invokeMethod(JavaClass.java:1410)
at fuego.lang.ObjectTypeDescription.invokeMethod(ObjectTypeDescription.java:1370)
... 23 more
I am not sure if I'm using the API the right way, and I couldn't find a specific example on this, so could someone please point out what I'm doing wrong here, or if there's a different way to do this ?
Edited by: user11963239 on Mar 2, 2010 3:51 AMHi ..
I noticed something strange : So far, I was running my code inside a CUnit test case, and I was getting the above error.
Now when I tried putting the same code inside an automatic activity and ran it, it worked fine !
I'm not sure why this happens.. but I guess it works fine then, except in a CUnit suite, for soem reason.
Another question I had on the same topic was - if I do not want to serialize all my attributes to XML - for example, if I have fields x, y and z in my TestObject, and I want to serialize only x to XML - is there any way to do this ?
Thanks ! -
Serialization Error after adding a new field to BPM Process
Hi,
I have a BPM Process to which I added a new attribute userid and consuming the BPM process in a web dynpro application, I created a model using the BPM Process's Web Service but getting a serialization error that the model does not have a mandatory field with name [userid]. see below.
FYI.. I can trigger my BPM process through the Web Service in wsnavigator , the error I am getting is while executing the BPM Process from the custom webdynpro.
Any idea how to resolve the issue?
XML Serialization Error. GenericObject [
<modelObject class="com.sap.demo.wdpoc.wd.models.model.NewOperation"><attribute name="In" value="KK"/><attribute name="Name" value="133"/><attribute name="Age" value="dad"/><attribute name="Designation" value="12124"/><attribute name="Userid" value="null"/></modelObject>
] does not have a mandatory field with name [userid].
[EXCEPTION]
com.sap.engine.services.webservices.jaxrpc.exceptions.XmlMarshalException: XML Serialization Error. GenericObject [
<modelObject class="com.sap.demo.wdpoc.wd.models.model.NewOperation"><attribute name="In" value="KK"/><attribute name="Name" value="133"/><attribute name="Age" value="dad"/><attribute name="Designation" value="12124"/><attribute name="Userid" value="null"/></modelObject>
] does not have a mandatory field with name [userid].
at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericFieldContent(SerializationUtil.java:1546)
at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericFields(SerializationUtil.java:1431)
at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericType(SerializationUtil.java:1383)
at com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType.serialize(GeneratedComplexType.java:168)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.serializeParameter(SOAPTransportBinding.java:1731)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.serializeRequest(SOAPTransportBinding.java:1683)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.writeSOAPRequestMessage(SOAPTransportBinding.java:254)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1272)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:952)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:907)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DInterfaceInvokerImpl.invokeOperation(DInterfaceInvokerImpl.java:76)
at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClassExecutable.execute(WSGenericModelClassExecutable.java:73)
at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModelClassExecutable.execute(WSTypedModelClassExecutable.java:49)
at com.sap.demo.wdpoc.wd.comp.wdpoc.Wdpoc.execute(Wdpoc.java:257)This question is not answered but I am marking it answered because I have to post more.
Sorry
-Ashwani -
BPM, serialization messages through XI
Hello,
I want to achieve the following:
A business process receives and manages each message through XI in the same order as the adapter engine has sent this message (EOIO) to the BPM.
Therefore I use the fork step (Necessary branches = 1).
The first branch receives messages and appends each message to a list. (Never ending iteration: 1 = 1). To receive each message I use a dummy correlation id like a version attribute of the message type (e.g. 1.0).
The second branch manages this message list how long as the last message in the list is managed (Iteration: ReveivedMessage.MessageId != MessageList[n].MessageId.
The process also sends messages EOIO.
I have tested it and it works. But I have never seen such a process and so I'm not sure whether this process reveals any errors.
Can anybody give me an hint whether this process is correct?
Regards
MarcHey Marc,
your questions are very pertinent.
I'll try to give some comments on experience that I've had.
For every collectPattern BPM instance (which is your case), you'll have a input queue which will receive messages while your correlation is active. So, while you are executing steps inside the block which defines the correlation, then you will also have messages being added to that instance's queue. So, it is extremely sugested that you use local correlations in a Block step and that you only put the loop with the receiving step and relevant container operation steps inside it.
In the case that some messages are in the queue but was never processed (because the fork or the loop reached an end condition, for example), they are called "Parked messages" and from XI SP 17/PI SP 8 you can even resend them (with a kind of huge delay time, this is a gap from workflow framework...). Check out these notes:
903139 BPE-RUN: Messages are not processed
901047 BPE-RUN: Local correlations, error in block at runtime
Briefly, you can minimize the probability of a parked message to occur, but you cannot eliminate it (probability will never reach zero). You can, by setting that particular BPM to a mode "without buffering" (meaning, no input queue), minimize the problem, and all messages which would be parked in "with buffering" mode will now be reprocessed (resent to BPE) but they have a kinda large delay (set in SMQR's Pause parameter for that particular queue).
To set the BPM for "without buffering" mode, you need to go to tx SWF_INB_CONF and enter the BPM_MODE='X' (the task of the BPM can be checked in SXI_CACHE).
But please read the notes (and the notes they refer to) before doing any setting. They comment you can't set a particular BPM to "without buffering" if you still have any parked messages for that BPM. You need to check and delete those through report RSWF_XI_UNPROCESSED_MSGS.
Regards,
Henrique. -
Warning message when starting Weblogic BPM server in SOA Suite 11G
Hi There,
I understand that most of the warning message we can ignore it but why at first the warning is generated? Anyone can delighted me for this warnings, I don't want this to be show in production mode because of the production policy from most of the clients.
Below are some of the warning message that shows in my Weblogic with BPM.
<Warning> <Connector> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1367486532106> <BEA-190110> <Resource Adapter is calling BootstrapContext.createTimer() and allocating a Timer Thread that is not managed by WebLogic Server. This may adversely impact the performance/operation of WebLogic Server.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486566020> <BEA-012035> <The Remote interface method: 'public abstract void oracle.bpm.analytics.measurement.metadata.IMeasurementMetadataService.load(oracle.fabric.composite.model.ComponentModel)' in EJB 'MeasurementMetadataService' contains a parameter of type: 'oracle.fabric.composite.model.ComponentModel' which is not Serializable. Though the EJB 'MeasurementMetadataService' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486566036> <BEA-012035> <The Remote interface method: 'public abstract void oracle.bpm.analytics.measurement.metadata.IMeasurementMetadataService.unload(oracle.fabric.composite.model.ComponentModel)' in EJB 'MeasurementMetadataService' contains a parameter of type: 'oracle.fabric.composite.model.ComponentModel' which is not Serializable. Though the EJB 'MeasurementMetadataService' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567018> <BEA-010001> <While deploying EJB 'FacadeFinderBean', class oracle.soa.management.internal.ejb.FacadeFinderBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567034> <BEA-010001> <While deploying EJB 'SOATestBean', class oracle.soa.management.internal.ejb.SOATestBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.SOAServiceInvokerEJB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.api.SOAServiceInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.SOAServiceInvokerEJB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.api.SOAServiceInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'CompositeMetadataServiceBean', class oracle.integration.platform.blocks.cmds.CompositeMetadataServiceBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'CompositeMetadataServiceBean', class oracle.integration.platform.blocks.cmds.CompositeMetadataServiceEx was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOADirectInvokerBean', class oracle.integration.platform.blocks.direct.SOADirectInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOADirectInvokerBean', class oracle.integration.platform.blocks.direct.Invoker was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567736> <BEA-010001> <While deploying EJB 'ContextAwareBean', class oracle.integration.platform.ejb.ContextAware was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569358> <BEA-015036> <In the EJB MessageDispatcherBean(Application: soa-infra, EJBComponent: sdpmessagingclient-ejb.jar), the value for the activation config property 'connectionFactoryJNDIName' will be ignored since it is overridden with the value 'OraSDPM/QueueConnectionFactory';>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569499> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarter was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterLocalHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterLocal was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTestBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTestHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTest was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtility was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityLocalHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityLocal was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <J2EE> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1367486592774> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application BPMComposer is not versioned.>
<Warning> <WorkManager> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486651383> <BEA-002919> <Unable to find a WorkManager with name wm/B2BWorkManager. Dispatch policy wm/B2BWorkManager will map to the default WorkManager for the application soa-infra>
<Warning> <WorkManager> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486651383> <BEA-002919> <Unable to find a WorkManager with name wm/B2BWorkManager. Dispatch policy wm/B2BWorkManager will map to the default WorkManager for the application soa-infra>Hi There,
I understand that most of the warning message we can ignore it but why at first the warning is generated? Anyone can delighted me for this warnings, I don't want this to be show in production mode because of the production policy from most of the clients.
Below are some of the warning message that shows in my Weblogic with BPM.
<Warning> <Connector> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1367486532106> <BEA-190110> <Resource Adapter is calling BootstrapContext.createTimer() and allocating a Timer Thread that is not managed by WebLogic Server. This may adversely impact the performance/operation of WebLogic Server.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486566020> <BEA-012035> <The Remote interface method: 'public abstract void oracle.bpm.analytics.measurement.metadata.IMeasurementMetadataService.load(oracle.fabric.composite.model.ComponentModel)' in EJB 'MeasurementMetadataService' contains a parameter of type: 'oracle.fabric.composite.model.ComponentModel' which is not Serializable. Though the EJB 'MeasurementMetadataService' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486566036> <BEA-012035> <The Remote interface method: 'public abstract void oracle.bpm.analytics.measurement.metadata.IMeasurementMetadataService.unload(oracle.fabric.composite.model.ComponentModel)' in EJB 'MeasurementMetadataService' contains a parameter of type: 'oracle.fabric.composite.model.ComponentModel' which is not Serializable. Though the EJB 'MeasurementMetadataService' has call-by-reference set to false, this parameter is not Serializable and hence will be passed by reference. A parameter can be passed using call-by-value only if the parameter type is Serializable.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567018> <BEA-010001> <While deploying EJB 'FacadeFinderBean', class oracle.soa.management.internal.ejb.FacadeFinderBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567034> <BEA-010001> <While deploying EJB 'SOATestBean', class oracle.soa.management.internal.ejb.SOATestBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.SOAServiceInvokerEJB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.api.SOAServiceInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.SOAServiceInvokerEJB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOAServiceInvokerEJB', class oracle.integration.platform.blocks.sdox.ejb.api.SOAServiceInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'CompositeMetadataServiceBean', class oracle.integration.platform.blocks.cmds.CompositeMetadataServiceBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'CompositeMetadataServiceBean', class oracle.integration.platform.blocks.cmds.CompositeMetadataServiceEx was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOADirectInvokerBean', class oracle.integration.platform.blocks.direct.SOADirectInvokerBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567720> <BEA-010001> <While deploying EJB 'SOADirectInvokerBean', class oracle.integration.platform.blocks.direct.Invoker was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486567736> <BEA-010001> <While deploying EJB 'ContextAwareBean', class oracle.integration.platform.ejb.ContextAware was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569358> <BEA-015036> <In the EJB MessageDispatcherBean(Application: soa-infra, EJBComponent: sdpmessagingclient-ejb.jar), the value for the activation config property 'connectionFactoryJNDIName' will be ignored since it is overridden with the value 'OraSDPM/QueueConnectionFactory';>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569499> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarter was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterLocalHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'B2BStarterBeanWLS', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BStarterLocal was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569514> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTestBean was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTestHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'oracle.tip.b2b.test.runtime.ServerTestBean', class oracle.tip.b2b.test.runtime.ServerTest was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569530> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtility was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityLocalHome was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <EJB> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486569546> <BEA-010001> <While deploying EJB 'B2BUtilityBean', class oracle.tip.b2b.j2ee.ejb.interfaces.IB2BUtilityLocal was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Warning> <J2EE> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1367486592774> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application BPMComposer is not versioned.>
<Warning> <WorkManager> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486651383> <BEA-002919> <Unable to find a WorkManager with name wm/B2BWorkManager. Dispatch policy wm/B2BWorkManager will map to the default WorkManager for the application soa-infra>
<Warning> <WorkManager> <server1> <BPM_MS1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1367486651383> <BEA-002919> <Unable to find a WorkManager with name wm/B2BWorkManager. Dispatch policy wm/B2BWorkManager will map to the default WorkManager for the application soa-infra> -
"No receiver agreement found" for BPM ???
Hi everybody
I think this could be an issue in the cache. I have a ccBPM and when I am sending the message who starts the BPM to the Integration Engine I got the following error:
<SAP:Stack>No receiver agreement found for sender -BS_SQL_Database to receiver -IP_ScanningStatus_01,http://xxxx.com/common/scanning.MI_JDBC_Response_Asyn_ABS</SAP:Stack>
IP_ScanningStatus_01 is an integration process and you do not need a receiver agreement ("not required" in receiver determination) to send a message to an integration process. Two weeks ago the process work and the very strange is, that in sxi_cache it shows the 31.07.2006 as last change/activation, but I did an activation yesterday. A full cache refresh did not change anything and the status of the cache is "up to date". We are on SP14 (:-<)
Regards OliverHi Udo
yes, that is exacly my problem.
I deleted the corresponding processes in the repository and in the configuration. I recreated the process in the repository under the same name and after that I tried to import the porces in the configuration under the same name, but now I got the following error:
Unable to transport object Integration Process IP_ScanningStatus_01 | http://xxxx.com/common/scanning (CE_ONESAP_ACETATE_MFG_xx, 1.0 of celanese.com) of type RepBProcess from application REPOSITORY on system REPOSITORY. Detailed information: Attempt to serialize the generic part of object Integration Process IP_ScanningStatus_01 | http://xxx.com/common/scanning failed(serialization problem)
Any Ideas?
How can I delete the old process out of cache?
Regards Oliver -
Unable to retrieve BPM in Integration Directory
Hi Experts, i got a problem like this. I have already created my design object (BPM, Interfaces, Mapping, etc) in Integration Repository. Then i am going to start working on the Integration Directory (Configuration) ... However, when i try to create New Integration Process in Integration Directory, and i already choose my Integration Process from the list of my IP in my repository, when i want to confirm it, i got this following error:
Unable to transport object Integration Process IP_MM096 | <my namespace> of type RepBProcess from application REPOSITORY on system REPOSITORY. Detailed information: Attempt to serialize the generic part of object Integration Process IP_MM096 | <my namespace> failed(serialization problem)
Anybody know or has an idea what is wrong with this?
NB: my Integration Process name is IP_MM096
thnks guys....I just finish redo the IP in my production system in IR. Then when i try to retrieve that new IP, i got the same message....I am out of idea what should i do next. Anyone? The thing is, i dont know the error mean...It just dont give enough information...
Unable to transport object Integration Process IP_MM096_NEW1 | of type RepBProcess from application REPOSITORY on system REPOSITORY. Detailed information: Attempt to serialize the generic part of object Integration Process IP_MM096_NEW1 (serialization problem) -
Remote JDBC Problem with Oracle BPM Studio
Hi all, i am facing the Remote JDBC Problem with Oracle BPM Studio.
When i configure a Remote JDBC Connection for SQL in BPM Studio, it prompt me an error.
The SQL Connection is configured as following :
External Resource:
Name : MyDS
Type : SQL Database
Supported Types : Remote JDBC
Details:
Database Type : BPM's Oracle Driver Version:10, 11
J2EE : WLS
Lookup Name : MyAppDS
Configuration for "WLS"
Name : WLS
Type : J2EE Application Server
Supported Types : GENERIC_J2EE
Details:
Initial Context Factory : weblogic.jndi.WLInitialContextFactory
URL : t3://localhost:7001
But, when i try to connect to the Database by using this configuration, I will get an Exception.
An exception occurred while getting a resource from a connector.
Detail:The connector [[ MyDS : SQL : REMOTE_JDBC ]] caused an exception when getting a resource.
Caused by: An exception occurred while getting a resource from a connector.
Detail:The connector [[ WLS : J2EE : J2EE ]] caused an exception when getting a resource.
Caused by: javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory [[ Root exception is java.lang.ClassNotFoundException: weblogic.jndi.WLInitialContextFactory ]]
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:657)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at fuego.jndi.FaultTolerantContext.createContext(FaultTolerantContext.java:726)
at fuego.jndi.FaultTolerantContext.<init>(FaultTolerantContext.java:79)
at fuego.connector.impl.GenericJ2EEConnector.createInitialContext(GenericJ2EEConnector.java:177)
at fuego.connector.impl.GenericJ2EEConnector.createStandaloneContext(GenericJ2EEConnector.java:98)
at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:92)
at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:76)
at fuego.connector.J2EEHelper.getReadOnlyContext(J2EEHelper.java:86)
... 12 more
Edited by: user2262377 on Jun 22, 2009 4:01 PMI guess the weblogic.jar is not included in the studio.
So, i added weblogic.jar (Weblogic 10.3) and wlclient.jar (Weblogic 10.3)
It is working in my simple java code. But, still not working in BPM Studio.
The error logs:
An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
Caused by: java.lang.Object cannot be cast to java.io.Serializable
fuego.connector.ConnectorException: An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
at fuego.connector.ConnectorException.exceptionOnGetResource(ConnectorException.java:88)
at fuego.connector.JDBCHelper.getReadOnlyConnection(JDBCHelper.java:93)
at fuego.sqlintrospector.BrowserPanel.connect(BrowserPanel.java:395)
at fuego.sqlintrospector.BrowserPanel.populateTree(BrowserPanel.java:200)
at fuego.ui.wizards.ui.CheckTreeBrowser$1.construct(CheckTreeBrowser.java:63)
at fuego.ui.SwingWorker$2.run(SwingWorker.java:39)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassCastException: java.lang.Object cannot be cast to java.io.Serializable
at weblogic.iiop.IIOPOutputStream.writeAny(IIOPOutputStream.java:1588)
at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2231)
at weblogic.utils.io.ObjectStreamClass.writeFields(ObjectStreamClass.java:413)
at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:235)
at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:225)
at weblogic.corba.utils.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:182)
at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:1963)
at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:2001)
at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2266)
at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) -
Oracle BPM 10.3.1 on Websphere 6.1.01.19
We configured the BPM 10.3.1 as per the documentation and deployed the sample application. All the applications came up. After logging into workspace, we got the following error.
The Process '/SampleProcess#Default-1.0' is not available.
The Process '/SampleProcess#Default-1.0' is not available. Caused by: Process '/SampleProcess#Default-1.0' not available. Caused by: Process execution engine execution error. Caused by: Unable to read value from underlying bridge : Mismatched serialization UIDs : Source (RepId RMI:fuego.processmodel.SchemaType:3762E1FD1A6B1BE5:E042B4BD5AE2E023) = E042B4BD5AE2E023 whereas Target (RepId RMI:fuego.processmodel.SchemaType:27B06D3C5FD137AB:45C151F9834AAD7F) = 45C151F9834AAD7F Caused by: Mismatched serialization UIDs : Source (RepId RMI:fuego.processmodel.SchemaType:3762E1FD1A6B1BE5:E042B4BD5AE2E023) = E042B4BD5AE2E023 whereas Target (RepId RMI:fuego.processmodel.SchemaType:27B06D3C5FD137AB:45C151F9834AAD7F) = 45C151F9834AAD7F
Any ideas what could be the problems.
Thanks in advance for any help.One of the problems we have seen in the past is that by default WAS 6.1.0.19 uses an IBM JVM 1.5 SR8. The version of the JVM that we have validated is IBM JVM 1.5 SR2. Any version greater than IBM JVM 1.5 SR2 introduces a problem with how enums are serialized. We are already working with IBM Support in getting this corrected. The java -version that we are using internally should render or show something like this: J2RE 1.5.0 IBM J9 2.3 AIX ppc64-64 j9vmap6324-20081129 (JIT enabled). Any greater version will show the error you are experiencing.
HTH,
eduardoc. -
Bussiness object serialization problem
Hi, I have a little problem with serialization, when I want to create xml from Business object. Example:
MyBoObject obj = new MyBoObject ();
obj.atr1 = "aaa";
obj.atr2 = "bbb";
String xml = DynamicXml.createXmlTextFor(object : obj, topLevelTag : "something");
display(xml);
And displayed result is:
<something>
<atr2>bbb</atr2>
</something>
atr1 is attribute, which is inherited from db table.
atr2 is atribute, which I created (it is not inherited from db table)
Whole problem is, that it only serialize atr2 - from some reason it completely ignores atr1 and his value.
Like I can't serialize attributes, which are inherited from db table.
But when I created new attribute atr2 in my Business Object (which is not inherited from db table), everything work ok. Where's the problem? I read docs, but found nothing...
Edited by: user12189610 on Nov 9, 2009 2:42 AM
Edited by: user12189610 on Nov 9, 2009 2:46 AMIf you need a simple project that duplicates this problem for customer support, here's where I put one: http://www.4shared.com/file/181611971/d21e9444/_2__DynamicXMLBug.html.
Have them import the project, start Studio's Engine, login as "test" and start the Workspace. Create a work item instance and then run the work item when it reaches the "Test" activity. When you run the logic, you'll see this displayed:
<?xml version="1.0" encoding="UTF-8"?>
<poHeir xmlns="http://bea.com/albpm/DynamicXml/version/2.0">
<nameForPO>Dan</nameForPO>
</poHeir>They should note that only the "nameForPO" tag is created by the DynamicXml.createXmlTextFor() method. "nameForPO" is an attribute I manually added to the XML Heir BPM Object. The attributes of the inherited heir (e.g. "poHeir.orderDate" and "poHeir.billTo") are not included as tags in the generated XML even though these attributes have been set in the logic. -
Hi guys,
I get an "unknown user type issue" for only one class defined in my pof-config-file. The rest are ok which is the part I can't get my head round.
Log (showing config load)
Everything seems to load ok. In fact, just to confirm, I messed up some tags in the xml file and I got problems. So it's finding the file ok.
+010-06-30 11:35:11.965/1.212 Oracle Coherence GE 3.5.3/465 <D5> (thread=Cluster, member=n/a): Member 1 joined Service InvocationService with senior member 1+
+2010-06-30 11:35:12.007/1.255 Oracle Coherence GE 3.5.3/465 <D5> (thread=Invocation:Management, member=2): Service Management joined the cluster with senior service member 1+
+2010-06-30 11:35:12.267/1.514 Oracle Coherence GE 3.5.3/465 <Info> (thread=Cluster, member=2): Loading POF configuration from resource "file:/mnt/linux-share/zeus/Zeus-core/config/zeus-pof-config.xml"+
+2010-06-30 11:35:12.268/1.515 Oracle Coherence GE 3.5.3/465 <Info> (thread=Cluster, member=2): Loading POF configuration from resource "jar:file:/mnt/linux-share/repository/com/tangsol/coherence/3.5.3/coherence-3.5.3.jar!/coherence-pof-config.xml"+
+2010-06-30 11:35:12.283/1.530 Oracle Coherence GE 3.5.3/465 <D5> (thread=DistributedCache, member=2): Service DistributedCache joined the cluster with senior service member 1+
+2010-06-30 11:35:12.338/1.585 Oracle Coherence GE 3.5.3/465 <D5> (thread=DistributedCache, member=2): Service DistributedCache: received ServiceConfigSync containing 2040 entries+
Exception
Exception in thread "main" java.lang.IllegalArgumentException: unknown user type: org.zeus.query.QueryInvocable
at com.tangosol.io.pof.ConfigurablePofContext.getUserTypeIdentifier(ConfigurablePofContext.java:400)
at com.tangosol.io.pof.ConfigurablePofContext.getUserTypeIdentifier(ConfigurablePofContext.java:389)
at com.tangosol.io.pof.PofBufferWriter.writeObject(PofBufferWriter.java:1432)
at com.tangosol.io.pof.ConfigurablePofContext.serialize(ConfigurablePofContext.java:338)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.writeObject(Service.CDB:4)
at com.tangosol.coherence.component.net.Message.writeObject(Message.CDB:1)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService$InvocationRequest.write(InvocationService.CDB:3)
at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.packetizeMessage(PacketPublisher.CDB:137)
at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher$InQueue.add(PacketPublisher.CDB:8)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.dispatchMessage(Grid.CDB:50)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.post(Grid.CDB:35)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.send(Grid.CDB:1)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService.execute(InvocationService.CDB:31)
at com.tangosol.coherence.component.util.safeService.SafeInvocationService.execute(SafeInvocationService.CDB:1)
at org.ebtic.bpm.zeus.query.DistributedQueryProcessor.invokeQuery(DistributedQueryProcessor.java:133)
at org.ebtic.bpm.zeus.query.DistributedQueryProcessor.query(DistributedQueryProcessor.java:95)
at org.ebtic.bpm.zeus.query.DistributedQueryProcessor.main(DistributedQueryProcessor.java:56)
My pof-config file looks like this:
+<!DOCTYPE pof-config SYSTEM "pof-config.dtd">+
+<pof-config>+
+<user-type-list>+
+<include>coherence-pof-config.xml</include>+
+<user-type>+
+<type-id>10001</type-id>+
+<class-name>org.util.ZeusKey</class-name>+
+</user-type>+
+<user-type>+
+<type-id>10002</type-id>+
+<clas-name>org.query.QueryInvocable</clas-name>+
+</user-type>+
+<user-type>+
+<type-id>10003</type-id>+
+<class-name>org.sequencegenerator.ZeusSequenceGenerator$State</class-name>+
+</user-type>+
+</user-type-list>+
+<allow-interfaces>true</allow-interfaces>+
+<allow-subclasses>true</allow-subclasses>+
+</pof-config>+
Only the class QueryInvocable is causing a problem. ZeusKey and SequenceGenerator are working perfectly well.
QueryInvocable looks like the following:
public class QueryInvocable
extends AbstractInvocable implements ExternalizableLite,
PortableObject
+{+
private String m_sCacheName;
private PartitionSet partitionSet;
public QueryInvocable()
+{+
+}+
public QueryInvocable(String sCacheName, PartitionSet partitions)
+{+
m_sCacheName = sCacheName;
partitionSet = partitions;
+}+
+public PartitionSet getPartitionSet(){+
return partitionSet;
+}+
+public String getCacheName(){+
return m_sCacheName;
+}+
+public void setPartitionSet(PartitionSet pSet){+
this.partitionSet = pSet;
+}+
+public void setCacheName(String name){+
this.m_sCacheName = name;
+}+
+/**+
+* {@inheritDoc}+
+public void run(){+
+try{+
ZeusQueryProcessor client = new ZeusQueryProcessor("Distributed Query Processor", partitionSet);
client.process();
+}+
+catch(Exception e){+
System.err.println("Exception creating ZeusQueryProcessor.");
e.printStackTrace();
+}+
+}+
+public void readExternal(PofReader reader) throws IOException{+
System.out.println("Reading in....");
m_sCacheName = reader.readString(0);
partitionSet = (PartitionSet) reader.readObject(1);
+}+
+public void writeExternal (PofWriter writer) throws IOException{+
System.out.println("Writing out....");;
writer.writeString(0, m_sCacheName);
writer.writeObject(1, partitionSet);
+}+
+public void readExternal(DataInput in) throws IOException{+
System.out.println("Reading in....");
m_sCacheName = (String) ExternalizableHelper.readObject(in);
partitionSet = (PartitionSet) ExternalizableHelper.readObject(in);
+}+
+public void writeExternal(DataOutput out) throws IOException{+
System.out.println("Writing out....");;
ExternalizableHelper.writeObject(out, m_sCacheName);
ExternalizableHelper.writeObject(out, partitionSet);
+}+
+}+
Edited by: user11218537 on 30-Jun-2010 00:54user11218537 wrote:
Sorry, this was the result of my not-very-efficient attempt to anonymize my code posting. The package and class names do actually match.
I may have "by accident" solved the problem but I am not sure since I have to test properly. It appears that if I define the PofSerialization stuff in the pof-context.xml, which is then referenced from my coherence-cache-config.xml, I should not set the tangosol.pof.enabled=true flag.
I was basically trying to turn of pof so that I could test something else in my code but it appears that just by removing that flag in the cache-server.sh script (which I had added earlier), the problem disappeared and coherence is still using pof.
What am I missing? Is this behaviour correct?If you remove the tangosol.pof.enabled flag from the Java properties, then POF by default will not be used.
On the other hand if you still have POF configured for certain services with the <serializer> element referring to a PofContext implementation e.g. ConfigurablePofContext, then those services (and only those services) will use POF.
Best regards,
Robert -
Hi Master,
I Attended the one Interview...I have some Questions, Please Reply ASAP..
<b>What is Pattern</b>? Why we are using with Real time Example.
Thanks & Regards,
SReddyHi,
As moorthy already said pattersns are like templates that can solve many of the real time scenarios either as given or with some customization.
In BPM there are different patterns and each one having some sub patterns within them with slight variations.
Some Patterns are,
1. Multicast Pattern.
2. Serialization Pattern.
3. Sync/Async Bridge Pattern.
4. Collect/Bundle Pattern.
You can go thro this help link for more examples in Patterns,
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
Regards,
P.Venkat -
Hi All,
I want to do ALE serialization for IDOC coming for SAP XI. I tried to create serialization group but it is giving as 'Choose the key from the allowed namespace'.
What should i do?
Ranjeet Singh.Hi Bhavesh,
Thanks for the reply. Actually i dont want to do idoc serialization in SAP XI. I want to do it in R3 side through ALE Master Data Distribution Serialization. We have interface between R3 and MDM and data is Customer master data. We want to send ADRMAS IDOC first and then DEBMAS data. Currently we are doing this using BPM with a 5 min wait betweeb sending IDOC. But since performance degrading approach, I am thinking of movng this logic to R3 side so that we dont; have to BPM adn wait step in XI and hence performance get improved.
Ranjeet Singh. -
Multiple Idocs (DEBMAS/ADRMAS) with SERDAT serialization to PI
Hi All,
I have a requirement that R3 systems sends data by means of serialization Idocs SERDAT basically which has two Idocs DEBMAS/ADRMAS. I need to generate a single structure at target side out of two incoming Idocs (DEBMAS/ADRMAS).
Could any one please advise me how can i extract data from two idocs in a single scenario?
Is there any standard approach already for this.
Thanks in advance.
Regards,
Prasad Babu.You can achieve the scenario by using ALE Serilization at IDOC Message Type
The below example addresss a similar scenario but for MATMAS material master and CLFMAS classification .
Search for "Serialization by IDOC Type" . The first link will give you the insight. (I am unable to post the link here..)
After the IDOC's come to PI, you can have a BPM to co-relate (DEBMAS/ADRMAS using Customer / Contact Numbers) and create a single Outout message.
- Siva Maranani
Edited by: Siva Maranani on Nov 9, 2009 10:09 PM -
Hi,
I am using BPM Enterprise 10.3.1 with Weblogic 10,
When I follow the turioal and other post in the forum, I can startSession and get the instanceInfo.
But when I try to createInstance, update Instance or Send Intance,
I have followed the post here, but also fail
Re: How to create process instance throught PAPI?
There error code is as following:
Line: -----
29-Dec-2010 15:21:30 com.sun.corba.se.impl.orbutil.CacheTable put_table
WARNING: "IOP00710275: (INTERNAL) Old entry in serialization indirection table has a different value than the value being added with the same key"
org.omg.CORBA.INTERNAL: vmcid: SUN minor code: 275 completed: No
at com.sun.corba.se.impl.logging.ORBUtilSystemException.duplicateIndirectionOffset(ORBUtilSystemException.java:5645)
at com.sun.corba.se.impl.logging.ORBUtilSystemException.duplicateIndirectionOffset(ORBUtilSystemException.java:5667)
at com.sun.corba.se.impl.orbutil.CacheTable.put_table(CacheTable.java:97)
at com.sun.corba.se.impl.orbutil.CacheTable.put(CacheTable.java:86)
at com.sun.corba.se.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:1068)
at com.sun.corba.se.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:879)
at com.sun.corba.se.impl.encoding.CDRInputStream_1_0.read_abstract_interface(CDRInputStream_1_0.java:873)
at com.sun.corba.se.impl.encoding.CDRInputStream_1_0.read_abstract_interface(CDRInputStream_1_0.java:863)
at com.sun.corba.se.impl.encoding.CDRInputStream.read_abstract_interface(CDRInputStream.java:269)
at com.sun.corba.se.impl.io.IIOPInputStream.readObjectDelegate(IIOPInputStream.java:363)
at com.sun.corba.se.impl.io.IIOPInputStream.readObjectOverride(IIOPInputStream.java:526)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:345)
at java.util.TreeMap.buildFromSorted(TreeMap.java:2380)
at java.util.TreeMap.buildFromSorted(TreeMap.java:2322)
at java.util.TreeMap.readObject(TreeMap.java:2268)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.corba.se.impl.io.IIOPInputStream.invokeObjectReader(IIOPInputStream.java:1700)
at com.sun.corba.se.impl.io.IIOPInputStream.inputObject(IIOPInputStream.java:1218)
at com.sun.corba.se.impl.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:400)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:327)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:293)
at com.sun.corba.se.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:1034)
at com.sun.corba.se.impl.encoding.CDRInputStream.read_value(CDRInputStream.java:253)
at com.sun.corba.se.impl.io.IIOPInputStream.inputObjectField(IIOPInputStream.java:1995)
at com.sun.corba.se.impl.io.IIOPInputStream.inputClassFields(IIOPInputStream.java:2220)
at com.sun.corba.se.impl.io.IIOPInputStream.inputObject(IIOPInputStream.java:1227)
at com.sun.corba.se.impl.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:400)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:327)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:293)
at com.sun.corba.se.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:1034)
at com.sun.corba.se.impl.encoding.CDRInputStream.read_value(CDRInputStream.java:253)
at com.sun.corba.se.impl.io.IIOPInputStream.inputObjectField(IIOPInputStream.java:1995)
at com.sun.corba.se.impl.io.IIOPInputStream.inputClassFields(IIOPInputStream.java:2220)
at com.sun.corba.se.impl.io.IIOPInputStream.inputObject(IIOPInputStream.java:1227)
at com.sun.corba.se.impl.io.IIOPInputStream.simpleReadObject(IIOPInputStream.java:400)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:327)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:293)
at com.sun.corba.se.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:1034)
at com.sun.corba.se.impl.encoding.CDRInputStream.read_value(CDRInputStream.java:253)
at com.sun.corba.se.impl.io.ValueHandlerImpl.read_Array(ValueHandlerImpl.java:756)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValueInternal(ValueHandlerImpl.java:325)
at com.sun.corba.se.impl.io.ValueHandlerImpl.readValue(ValueHandlerImpl.java:293)
at com.sun.corba.se.impl.encoding.CDRInputStream_1_0.read_value(CDRInputStream_1_0.java:1034)
at com.sun.corba.se.impl.encoding.CDRInputStream.read_value(CDRInputStream.java:253)
at fuego.papi.impl.j2ee._EJBSecureEngineInterface_Stub.getProcesses(Unknown Source)
at fuego.papi.impl.j2ee.EJBSecureEngineInterfaceWrapper.getProcesses(EJBSecureEngineInterfaceWrapper.java:297)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at fuego.papi.impl.AbstractSecureEngineHandler.invokeInternal(AbstractSecureEngineHandler.java:49)
at fuego.papi.impl.j2ee.EJBSecureEngineHandler.doInvoke(EJBSecureEngineHandler.java:105)
at fuego.papi.impl.j2ee.EJBSecureEngineHandler.invoke(EJBSecureEngineHandler.java:56)
at $Proxy38.getProcesses(Unknown Source)
at fuego.papi.impl.AbstractProcessLoader.createProcess(AbstractProcessLoader.java:49)
at fuego.papi.impl.AbstractProcessLoader.createProcess(AbstractProcessLoader.java:36)
at fuego.papi.impl.SessionProcessLoader.load(SessionProcessLoader.java:254)
at fuego.papi.impl.ProcessManager.get(ProcessManager.java:894)
at fuego.papi.impl.ProcessServiceImpl.getProcess(ProcessServiceImpl.java:1364)
at fuego.papi.impl.SessionProcessManager.getProcess(SessionProcessManager.java:143)
at fuego.papi.impl.ProcessServiceSessionImpl.processGet(ProcessServiceSessionImpl.java:2660)
at fuego.papi.impl.ProcessInstanceOperation.getSortedInstances(ProcessInstanceOperation.java:1073)
at fuego.papi.impl.ProcessInstanceOperation.executeBatchOperation(ProcessInstanceOperation.java:1142)
at fuego.papi.impl.ProcessInstanceOperation.instancesSendTo(ProcessInstanceOperation.java:563)
at fuego.papi.impl.ProcessInstanceOperation.instancesSend(ProcessInstanceOperation.java:542)
at fuego.papi.impl.ProcessServiceSessionImpl.instancesSend(ProcessServiceSessionImpl.java:1190)
at iacm.saa.eleave.web.PapiBean.getConnection(PapiBean.java:134)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at javax.el.BeanELResolver.getValue(BeanELResolver.java:62)
at javax.el.CompositeELResolver.getValue(CompositeELResolver.java:53)
at org.apache.myfaces.el.unified.resolver.FacesCompositeELResolver.getValue(FacesCompositeELResolver.java:140)
at org.apache.el.parser.AstValue.getValue(AstValue.java:118)
at org.apache.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:186)
at com.sun.facelets.el.TagValueExpression.getValue(TagValueExpression.java:71)
at javax.faces.component.UIOutput.getValue(UIOutput.java:73)
at org.apache.myfaces.shared_impl.renderkit.RendererUtils.getValue(RendererUtils.java:339)
at org.apache.myfaces.shared_impl.renderkit.RendererUtils.getStringValue(RendererUtils.java:291)
at org.apache.myfaces.shared_impl.renderkit.html.HtmlTextRendererBase.renderOutput(HtmlTextRendererBase.java:74)
at org.apache.myfaces.shared_impl.renderkit.html.HtmlTextRendererBase.encodeEnd(HtmlTextRendererBase.java:61)
at javax.faces.component.UIComponentBase.encodeEnd(UIComponentBase.java:624)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:261)
at javax.faces.component.UIComponent.encodeAll(UIComponent.java:257)
at com.sun.facelets.FaceletViewHandler.renderView(FaceletViewHandler.java:592)
at org.ajax4jsf.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:100)
at org.ajax4jsf.application.AjaxViewHandler.renderView(AjaxViewHandler.java:176)
at org.springframework.faces.webflow.JsfView.render(JsfView.java:97)
at org.springframework.webflow.engine.ViewState.render(ViewState.java:253)
at org.springframework.webflow.engine.ViewState.resume(ViewState.java:208)
at org.springframework.webflow.engine.Flow.resume(Flow.java:545)
at org.springframework.webflow.engine.impl.FlowExecutionImpl.resume(FlowExecutionImpl.java:259)
at org.springframework.webflow.executor.FlowExecutorImpl.resumeExecution(FlowExecutorImpl.java:163)
at org.springframework.webflow.mvc.servlet.FlowHandlerAdapter.handle(FlowHandlerAdapter.java:183)
at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:875)
at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:807)
at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:571)
at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:501)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.ajax4jsf.webapp.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:178)
at org.ajax4jsf.webapp.BaseFilter.handleRequest(BaseFilter.java:290)
at org.ajax4jsf.webapp.BaseFilter.processUploadsAndHandleRequest(BaseFilter.java:388)
at org.ajax4jsf.webapp.BaseFilter.doFilter(BaseFilter.java:515)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:378)
at org.springframework.security.intercept.web.FilterSecurityInterceptor.invoke(FilterSecurityInterceptor.java:109)
at org.springframework.security.intercept.web.FilterSecurityInterceptor.doFilter(FilterSecurityInterceptor.java:83)
at org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
at org.springframework.security.ui.SessionFixationProtectionFilter.doFilterHttp(SessionFixationProtectionFilter.java:67)
at org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
at org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
at org.springframework.security.ui.ntlm.NtlmProcessingFilter.doFilterHttp(NtlmProcessingFilter.java:351)
at iacm.security.spring.filter.IacmNtlmProcessingFilter.doFilterHttp(IacmNtlmProcessingFilter.java:55)
at org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
at org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
at org.springframework.security.ui.ExceptionTranslationFilter.doFilterHttp(ExceptionTranslationFilter.java:101)
at org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
at org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
at org.springframework.security.context.HttpSessionContextIntegrationFilter.doFilterHttp(HttpSessionContextIntegrationFilter.java:235)
at org.springframework.security.ui.SpringSecurityFilter.doFilter(SpringSecurityFilter.java:53)
at org.springframework.security.util.FilterChainProxy$VirtualFilterChain.doFilter(FilterChainProxy.java:390)
at org.springframework.security.util.FilterChainProxy.doFilter(FilterChainProxy.java:175)
at org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:236)
at org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:167)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.springframework.web.filter.CharacterEncodingFilter.doFilterInternal(CharacterEncodingFilter.java:96)
at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:76)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
15:21:30,297 ERROR DepartmentDaoImpl:147 - fuego.papi.exception.InstancesException: The batch operation could not be executed for all selected instances.
Line: -----
My envoriment is:
1. Using the local Studio to create the process, and deploy it on the Enterprise which is runing under a WLS
2. My PAPI client is running on a Tomcat Server which is using Spring+Hibernate
I have try this setting also
System.setProperty("fuego.j2ee.initialctx.url","http://server/conf/engine.porperties");
But what should I subituite the "server/conf"? my BPM Admin is runing at "PCNAME:8686/webconsole" and Workspace is runing ar "PCNAME:7001/workspace"
Please help ,
Thank you
Best Wishes
Alex IeongHi Ariel,
Yes, Thank you
I have the Property Setting as following already,
Properties systemProperties = System.getProperties();
systemProperties.setProperty("java.naming.factory.initial", "weblogic.jndi.WLInitialContextFactory");
systemProperties.setProperty("java.naming.provider.url", "t3://pcName:7001/");
Do you have any idea?
Thank you
Best Wishes
Alex Ieong
Maybe you are looking for
-
Color Looks not showing up in Color FX tab, help!
I am running Color 1.5 on Snow Leopard, downloaded the Color Looks package and installed them in Users/Application Support/Color/Effects. However, even after a computer restart, the new effects are still not appearing anywhere in Color. I have also t
-
Logical diagram's relation lines invisible
In my logical diagram and its subviews, a few of the lines (maybe 10%) representing relations aren't appearing between the entities. The relations exist and appear to be defined just as the ones that do appear. In "Show/Hide Relationships", they're
-
Update GL Account number in account assignment PO
Dear Guru's, I have a requirement to replace proposal gl account in PO after item is entered, this requirement it's because of for several document type they need to map the gl account into other account but didn't want to use config. It's frustating
-
iPad not receiving PDFs, never had this problem in past. Had sender resend to a friend, she received them in correct format. Help, not very technical lay terms please.
-
Adobe Flash update will not load WHY!!!!!!!!
I can't play anything requiring an Adobe Flash upgrade. Because I can't load the Adobe Flash Upgrade it works fine on my Explorer web browser but it will not load on firefox and it tells me to turn off firefox. I just sent in $30 dollars as a support