Serious issues; i need help!

Ok.
I purchased the SoundBlaster Audigy 2 ZS Gamer pack, and proceeded to install into my tower. I removed my old one, all the software connected to it. I carefully follow the instructions that cam with the package: Install the card first, install the software that came with it, then did a shut-down, plugged in my speakers into the required ports(one for front speakers, the other for surround), and started up my system.
I run the diagnostics, and everything checks out fine. I have a 4. sound system(4 speakers and a subwoofer). I selected 4/4. speaker setup, but in my audio and sound devices, there is no listing for that setup; only 5. and surround sound. So, I selected surround sound. So, now I've got everything set up right, I go and play some mp3s. Sound comes through clearly, no problems. But, out of nowhere, there's this loud BEEEP that comes in. I thought it could be the file itself. But, it's completely random, popping in and out. Eventually, after playing the music for some time, another loud beep comes in, and my system locks up and reboots itself. Once Windows XP Pro comes back up, it tells me "windows recovered from a serious error", and asks to send an error message. So, I send it, and it tells me I had a hardware failure, that my CPU rebooted the machine because there was some sort of hardware failure. This also occurs whenever I play my games. I barely even get into the game before it does the same BEEEP and reboot.
I've done a clean removal of everything, and re-installed. Nothing.
I've brought in my system to Best Buy, where I purchased the card, and had there "Geek Squad" guys take a look at it. They couldn't figure it out, so we swapped cards, and got a new one; same model.
I did everything by instruction. Still crashes.
I did a clean boot from XP Pro, even disabled my ethernet card. Nothing.
I've been working on this for days now, and I'm getting very frustrated. I know it can't be a hardware issue, because i get sound fine, up until the crash. My hard dri've was wiped, so I can't see how it could be a software issue.
Help as soon as possible would be greatly appreciated.

Also I went into the BIOS and turned off my PC Speaker, thinking it could have some sort of conflict, but, that didn't work either.
I dunno if my sound card is having issues with my speakers, which are Altec Lansing THX Certified speakers that came with my system upon purchase. This started when I put the card in, but my system is reading the card fine and that it is functioning fine.
argh.

Similar Messages

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am l

I have a "Contact" organization issue I need help with. I organize multiple customers under their account affiliation. I place the people with their contact info under each account name by their dept/role in the notes section of their account. I am looking to be able to directly dial / email from this info in yet notes section located within a contact. On Blackberry, the notes area entered in a contact can connect directly but on the iPhone those numbers/emails are inactive. I am trying to avoid having to create each of these individuals as a separate contact and keep them under their account affiliation. It is easier to find them. This does not seem like that complicated of a request and hoping someone can tell me how or share an app that will enable the "notes" within a contact be "active". Hope this makes sense.

I seem to recall that this question has been asked before and I'm pretty sure that the answer is that you can't do what you want to do with the native contact app. However, there are lots of contact apps out there that pull from the built app's data but have other features. Perhaps one of them would meet your needs.

My iphone 5 crashes (restarts) automatically after updating to ios 7.1 anyboday facing same issues ? Need help !!!!

my iphone 5 crashes (restarts) automatically after updating to ios 7.1 anyboday facing same issues ? Need help !!!!

I am having the same issues--just got off phone with customer service rep--was told that my phone is in recoveyr mode and that I would have to restore it, however, the only things that would be restored would be from my last backup which was in November 2013! I was also told that apple users should not update as soon as the update is available (so why are they sending it to us if they're not sure that there will be any problems!!!). I can't restore now since I am in work--will do it when I go home tonight. In the meantime, I am without a working iphone for the day! This is horrible--I see I'm not the only one who has experienced this!

Envy 23 ,, IE issues , i need help :/

Hey there people, (: ... I am new to this and on here but i really need someones help so I'm going straight to the point..
well i have this issue with the Internet explore on desktop and on metro interface,
on desktop is like blocked cos it doesn't do nothing at all and on metro interface the IE icon disappeared and i don't know how to get it back on the tiles because it doesn't even show on the all apps page of tiles:/
if somebody has any idea and can help me figure out how to make it work properly , id really appreciate it if you message me back or if you'd like to get in touch to talk about the issue just message me please , thank you. (:

Hello roel101,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how you are not able to access Internet Explorer, and I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
What version of Windows do you have installed on your computer?
Has your computer completed all of its important Windows Updates?
Have you updated your HP drivers using the HP Support Assistant?
Is this an on-going, or recent issue?
In the meantime, I recommend following this document on Internet Explorer App Missing in Windows 8/Windows 8.1, as well as this document on Troubleshoot problems with an app. This should help return functionality to your Internet Explorer app.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Desktop Hardware issue. Need help

Hi All,
I have been having continuous problems with my HP pavilion p7-1044. LINK
--> System will shut off after staying on for about 7-10 minutes. The fans and motherboard lights stay on after the crash.
--> Try to power on after crash, the blue power light comes on, fans starts running, motherboard light comes on BUT the amber/orange light beside the blue power light does not come on and thus computer does not start
--> If i let it cool down for few hours, i may be able to get it up and running again. If i want the computer working right away after crash then I have to remove the fan, remove the processor and let it sit outside for 5-10 minutes and put it back and restart computer. then power blue light and orange processor? light comes on and computer starts
--> i have made sure its not power supply issue
--> i have wiped the silver liquid thats applied on the processor chip and applied new paste (followed a youtube video - step by step)
--> i have changed the fan. i have installed speedy fan and increased fan speed and that makes the computer stay on longer than 7-10 minutes. the computer stays on for hours but eventually crashes.
--> done all that i could find on HP support. (pretty much did all basic hardware test)
--> the desktop was off for 3-4 months and today i turned on the computer (hoping my computer may have forgotten that it had this issue since it was off for 3-4 months and may be it will start working properly now ! ). but i was wrong. the computer worked properly for 7-10 minutes and it crashed.
--> processor (little 1.5 inch chip) becomes very hot - which points that fan is issue but as mentioned above i have already replaced the fan and also tried increasing speed of fan
--> i have been working on this bloody issue for over a year now. i am so against taking the desktop to repair shop.
my next plan of attack to this problem includes replacing motherboard. or may be processor chip ...
any help/suggestions would be greatly appreciated.
thanks guys

Hello @Pritesh16,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you have been experiencing an issue with your HP Pavilion p7-1044 Desktop PC not starting up properly. I am providing you with an HP Support document: Troubleshooting Power Supply Issues, which has been designed to start the troubleshooting process at the power supply and move to other hardware depending on the troubleshooting results. I recommend you review the document and follow it where it leads in identifying what is not functioning correctly on your computer.
Please re-post if you require addtional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Help! Having Serious Issues and need to save my data!!!

This is probably going to be a long post, and I apologie in advance, but before I give up completely, I need to see if there's anything that I can do to save the data on my computer. Also, I'm writing this from work and don't have access to the system right now, so I'm going to have to rely on my questionable memory to relay the situation.
Since the battery update was installed, I was having intermittent issues with my MBP battery - when I was fully charged, it only showed about 1:45 of time left (down from a usual 3:00 or so). When it would get down to about 50 minutes left, the system would shut off with no warning. I was about to take the system into the Apple Store to get the battery replaced last week, but just to make sure, I followed the instructions to reset the battery and after that was done, it seemed like the battery was fine (showed up as about 3:00 fully charged). But... the system started working very slowly.
As a result, I decided to try to back up the system (I use SuperDuper and backup to an external USB drive). The backup failed mid-stream and my backup file was now useless (that's the last time I use the erase before backing up option). So now I don't have a backup of my data (all of my data is on that laptop).
I tried running Disk Utility, by booting from the installation DVD, to Repair the disk and it stopped with an invalid node error. I tried again, but no joy. A third time, it appears to have completed. However, now when I boot the system, not only is it really slow, but it boots into some unfamiliar linux prompt ("I don't have a name#:", or something like that.
Since I still think that there was a file system problem, I bought a copy of DiskWarrior 4. However, I don't want to wait for the bootable CD, so I tried to install the OS on the external USB drive so I could run it from there. Everytime I tried to install to the USB drive, I got a kernel panic when the IT Tunes install script was loaded. Every time. I tried removing the second (add-on) RAM stick, removing the battery, etc. No joy. Finally on about the 10th attempt, this time on battery power only (no power cable connected), I managed to get the OS to install on the USB drive.
Okay, so now I can boot to the USB drive. I installed Disk Warrior 4 and ran it on the internal hard drive. Kernel Panic. Every time I've run it (error is about unlocking mutex). Even more frustrated now, I tried to backup the disk again (since all my data is on there, I can't afford to lose any of it). No joy. The backup (using SuperDuper or CloneCopyX) fails at various spots. I have some folders on the drive that I tried to copy off (about 7GB) that contain disk images and the like. That copy failed.
So now, I have un-backupable (is that a word) hard drive that I can't repair without kernel panics (although, now as I write this, I didn't try DW without the power cord). And what I need to know is if anyone can think of anything that I haven't tried to save my user data off of the system before I have to take it in to the Apple Store and potentially lose everything that's on it.
My number 1 concern right now is losing the data on the drive.
Can anyone help me at all?
Again, sorry for the long post...
Thanks!
Jim
17" MacBookPro Mac OS X (10.4.9) 2GB RAM, 120GB HD, Glossy Screen

You may not have the luxury of having another Mac but you must know someone who does. You need to boot your Mac into target disk mode. This is going to be your best bet as far as saving your files. Keep in mind that everytime you mess with this computer you are further endangering your data. Also, once your Mac is booted as a target disk, it may be possible to mount it on a windoze computer just to copy your files to another drive. I used to have one here and if i still did I would try this for you but I "offed" it in favor on running windoze (Parallels) on my MBP. But, one way or another, you need to get next to another computer.

'User failed to respond' (error -8) - a serious issue that needs attention

Based on the various posts here it is becoming increasingly apparent that, in most cases, this is not a user defined issue related to incorrect router settings/port configurations etc..
There also appears to be a fairly conspicuous correlation between upgrading to Mac OS X 10.4.7/Qtime 7.1.2 and the onset of problems with iChat. It is particularly notable that many people have been using iChat successfully for some time and that it has all of a sudden ceased working despite no manipulation of parameters related to network access (other than those associated with the 10.4.7 software upgrade of course).
In summary, it appears that that the 10.4.7 upgrade has rendered iChat inoperable (possibly through altering the nature of communication with wireless routers? I have’nt noted if anyone with hardwired connections have been experiencing these problems).
I am not an expert in this area, so apologies if I am stating the bleedingly obvious (or, at the other end of the spectrum, if I'm completely off the mark). Nonetheless, this appears to be a serious, global issue that is affecting an increasing number of people in the same way despite having different routers, ISP's etc.. and it is something that needs addressing.
Is there anything in the pipeline on this yet? Or is it still being handled on a case-by-case basis, which, while appreciated, has not been successful in any way thus far.
Some sort of formal response re: what steps are being taken to correct this would certainly be appreciated by many it appears.

I strongly agree. I have had nothing but trouble with iChat since I upgraded to 10.4.7 & QT 7.1.2 (error -8, not responding...). I can still chat to other buddies running Tiger, but no longer can chat to buddies on AIM PCs or buddies running Panther -- buddies I have been chatting to for more than a year without a single problem.
I also tested against the automatic clients on Ralph John's great website: appleu3test01 works fine, rjinwipc doesn't.
I have tried using the 10.4.7 combo update -- no luck. I have even tried reverting my iChat & its libraries back to 10.4.6 using Pacifist. Same problem. Alas, I am on a group wireless router that I am not allowed to administer, so I can not try any of Ralph's port opening tricks... So, short of reinstalling the entire OS, I am stuck.
Given the large number of people who are reporting this erorr recently, clearly, the 10.4.7/QT 7.1.2 updates have broken iChat for many, many people. Apple needs to step up and:
1) acknowledge they have broken something
2) build a "revert to 10.4.6 installer", as they did with QT a few months ago.
3) publish an official workaround (if the port opening works)
4) give us a timeline for a patch ASAP
Thanks, LachlanT for saying what needed to be said.
P.S. I went by my local Apple store last week and noticed that all their machines are at still 10.4.6...

2 NUMBERS issues i need help with

1. is there a way to "lock" certain colums in a spreadsheet? for example, i have a spreadsheet where column A is the product name, columns B thru M are wholesale prices that have to be input and Columns N thru Y the numbers are calculated and populated into the cells, but if i accidentally happen to click on a cell in that area, it can pop up the formula and then if you accidentally click on another cell, it adds that cell name to the formula.. or if you click it you can "pick up" the cell and move it to another location.. just wondering if there is a way to lock that section where the formula can't be changed or cells accidentally moved...
2. on this same spreadsheet... i'm wondering if there is a way to set like a "master" formula or formulas... and have the formula in the cells be kind of like clones of the master formula... i have the formula set to add a percent to the wholesale price, to get the retail price, but if want to change that percentage, right now i would have to go into every cell for every product and every size and change the percentage... and there are 12 price variations for each product.. times over 3,500 products.. you see where i'm going here.. it would be almost impossible to change all those percentages in each cell every time i needed to change the markup percentage... surely there is a way to make this happen, i just haven't been able to figure it out.. i'm thinking i may need to have a few master formulas for different brands or maybe i could just separate each brand of product into their own sheet and just have 1 master formula per sheet..
hopefully that all makes sense..
thanks for any help you provide..
gary

thanks t quinn for your help.. i was able to get the percentage thing fixed...
i do have two more questions if you don't mind....
1.when i am typing in the formula, why does the formula take on the column name and product name (row) fields instead of just keeping the column letter and row number i typed in.. for example, i typed in B3 x $B$1 + B3 and when i hit the check mark to save it, it changes the formula to
wholesalecostblueshoes x $B$1 + wholesalecostblueshoes (where wholesale cost is the Column and blue shoes is the product name in that row.. i mean the formula still works, but it's kind of an annoying housekeeping issue... not all the boxes with the formula in them change to this, some retain the Column letter and row number.. but some switch to what the name of the column and row are...
2. i added a check mark column so that when i am working on updating the prices, i can click the check box to remember that that row has been updated... now, the next time i need to update the prices, all the checks are checked.. what i want to know is, is there a way to have a separate checkbox like up by the MARKUP PERCENT box that i can click to UNCHECK all the boxes... you know so i don't have to manually click on every checkbox to uncheck them... kind of like a "check all" "uncheck all" kind of thing...
thanks,
gary

A few issues i need help with please

Im running SBS 2008, replaced all hard disks in raid as there were some faults just to eliminate these.
The main problem is users are disconnecting from exchange quite often and its quite imporatant that they receive there emails on time, if they use web access this isnt a problem.
I will list below some of the event logs from the server anymore info needed please ask and thanks in advance.
I have also run Fix my network and this doesnt return anything
Im also running AVG email server edition.
Log Name:      System
Source:        bowser
Date:          10/22/2014 11:21:42 AM
Event ID:      8003
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SERVER.****.local
Description:
The master browser has received a server announcement from the computer KATHRYNLTOP-PC that believes that it is the master browser for the domain on transport NetBT_Tcpip_{3CEA2B1D-7E6D-4B3F-BAA0-0C1FE5201DFC}. The master browser is stopping or an election
is being forced.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="bowser" />
    <EventID Qualifiers="49152">8003</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-22T10:21:42.803Z" />
    <EventRecordID>3174712</EventRecordID>
    <Channel>System</Channel>
    <Computer>SERVER.****.local</Computer>
    <Security />
</System>
<EventData>
    <Data>\Device\LanmanDatagramReceiver</Data>
    <Data>KATHRYNLTOP-PC</Data>
    <Data>NetBT_Tcpip_{3CEA2B1D-7E6D-4B3F-BAA0-0C1FE5201DFC}</Data>
    <Binary>000000000300320000000000431F00C0000000000000000001000000000000000000000000000000</Binary>
</EventData>
</Event>
Next one
Log Name:      System
Source:        Microsoft-Windows-Security-Kerberos
Date:          10/22/2014 11:21:02 AM
Event ID:      4
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      SERVER.****.local
Description:
The Kerberos client received a KRB_AP_ERR_MODIFIED error from the server karen-pc$. The target name used was cifs/MARTAPC.wrmsol.local. This indicates that the target server failed to decrypt the ticket provided by the client. This can occur when the target
server principal name (SPN) is registered on an account other than the account the target service is using. Please ensure that the target SPN is registered on, and only registered on, the account used by the server. This error can also happen when the target
service is using a different password for the target service account than what the Kerberos Key Distribution Center (KDC) has for the target service account. Please ensure that the service on the server and the KDC are both updated to use the current password.
If the server name is not fully qualified, and the target domain (****.LOCAL) is different from the client domain (****.LOCAL), check if there are identically named server accounts in these two domains, or use the fully-qualified name to identify the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Security-Kerberos" Guid="{98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}" EventSourceName="Kerberos" />
    <EventID Qualifiers="16384">4</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-22T10:21:02.000Z" />
    <EventRecordID>3174709</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>SERVER.****.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="Server">karen-pc$</Data>
    <Data Name="TargetRealm">****.LOCAL</Data>
    <Data Name="Targetname">cifs/MARTAPC.****.local</Data>
    <Data Name="ClientRealm">****.LOCAL</Data>
    <Binary>
    </Binary>
</EventData>
</Event>
Next one
Log Name:      Application
Source:        Microsoft-Windows-Winlogon
Date:          10/22/2014 6:16:45 AM
Event ID:      4005
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      ****.wrmsol.local
Description:
The Windows logon process has unexpectedly terminated.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Winlogon" Guid="{DBE9B383-7CF3-4331-91CC-A3CB16A3B538}" EventSourceName="Winlogon" />
    <EventID Qualifiers="49152">4005</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-22T05:16:45.000Z" />
    <EventRecordID>1102726</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>SERVER.wrmsol.local</Computer>
    <Security />
</System>
<EventData>
    <Binary>1F000000</Binary>
</EventData>
</Event>
Next one
Log Name:      System
Source:        Microsoft-Windows-HttpEvent
Date:          10/22/2014 5:00:00 AM
Event ID:      15301
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      SERVER.wrmsol.local
Description:
SSL Certificate Settings created by an admin process for Port : 0.0.0.0:50106 .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-HttpEvent" Guid="{7b6bc78c-898b-4170-bbf8-1a469ea43fc5}" EventSourceName="HTTP" />
    <EventID Qualifiers="32768">15301</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-22T04:00:00.207Z" />
    <EventRecordID>3174439</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="72" />
    <Channel>System</Channel>
    <Computer>SERVER.****.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="DeviceObject">\Device\Http\ReqQueue</Data>
    <Data Name="SocketAddress">0.0.0.0:50106</Data>
</EventData>
</Event>

I just removed AVG 2013 from a customer site on Monday this week after their server encountered critical Exchange issues (ms exchange transport wouldn't stay running). The removal of AVG was painful and required the AVG supported removal tool.
Post removal their SBS is running without issue, Exchange processes are now all resolved.
I'm not saying at all that your issue is related to your AVG installation, but you might try removing the product to see if it is somehow related to your situation. If removal resolves client connectivity, then you have a pointer at least and you can get
support from your software vendor to get the product reinstalled! And if you've still got issues, well at least you've ruled out one item that isn't causing it...
It's where I would start. Hope that helps,
-Jason
Jason Miller B.Comm (Hons), MCSA, MCITP, Microsoft MVP

Having Multiple issues..Need help to solve L870D ST3NX1

Dear All,
I recently bought new laptop from ToshibaDirect.com. (L870D ST3NX1)
As I have already posted the issue, I had problem with making partition and after using EasyUS partition software my machine was not able to recognize the recovery default partition created by Win8. I requested a recovery media image here in India but unfortunately Toshiba failed to help so..."Pathetic in 21st century".
However I have able to install a professional version of Win8 and my laptop is working now but leaves few issues behind it. I believe someone here help me to get resolve all issues.
I have downloaded almost all drivers from this site and installed successfully.
Issues:
1. I am not able to find out the right driver for the display screen (Not display card) and it is set to default as "Generic PnP Monitor". Will I able to get the original driver for it?
2. I guess because of the above issue, I have another issue with display: The text on the white screen seems to blur with letters "AJKMNOSVWXY bcegjkmnopqrsuvwxy' "()" etc. Those letters get blur at the side. I am not able to get sharp images. Kindly guide.
3. The RAM speed is actually 1600MHz as per specification but on my machine it shows only 800MHz, how can I increase it? (Image attached)
4. In the Device Manager utility I get the massage for "Unknown Device". I tried to remove the device but again it gets detected by system and shows unable to find appropriate drivers. (Image Attached)
5. For the Bluetooth I am unable to send a single file, if tried to send multiple files then all files my other Bluetooth device receives except the last one. (Error message image attached)
6. I unable to use function keys, as in the beginning I used to use it with installed default version of Win8 by Toshiba. I have installed the software and drivers too.
7. I use Adobe Illustrator CS5 for my graphic use, when I tried to work on a tuff task with vector graphics my Adobe Illustrator software showed the message "Not Responding" and it automatically quit the session. I was not running out of RAM or not seen to much pressure on CPU, then why it just gave up?
My previous machine with AMD Turion x2 processor, Win7-64bit install having 4GB RAM was taking much time to process the task while showing on the screen same message "Not Responding" but however get done the task. Why this advance machine with advance software and hardware is not baring the load? I am confuse..Please give me valid solution for this too.
Kindly help me for this issues.
Thanks,
Nixon
Attachments:
Bluetooth.JPG ‏40 KB
RAM Speed.JPG ‏67 KB
Unknown Device.JPG ‏67 KB

Up to 30? Just a guess, but are you perhaps a business owner?
At any rate, for 30 users, I'm almost tempted to steer you towards a business class WiFi router. Granted, yes, a "commercial" router will work, but a business class might also have options to limit bandwidth per user as well.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

Used z61m has some serious issues,can u help?

most times works fine,can spend hours on it with no issues.but here are all the things it does.1)sometimes when you cut it on the pointer wont move,and i have to cut it off and back on(sometimes numerous) til works.2)sometimes you can not type in at all in search windows,or email,again have to cut off and on.3)sometimes when writing,say an email,it will just start your line in the middle of a paragraph youve already written.4)sometimes when writing the words actually come out completely backwards.5)if you attach an external mouse and its plugged in when you cut computer on,it beeps at you and will not let you cut it on til you unplug.6)and this is apparently the most serious,when logging off or simply cutting computer off the dreaded "blue screen" appears.i have no idea how to do what it says to correct.it starts" a stop process has been detected and windows has been shut down to protect computer,etc,etc.so is this to much?should i go out and shoot it.

i don't know whether you still have the recovery partition active.
So let's give it a try.
Reboot your computer, then press the thinkvantage button (the blue button next to the volume button on the keyboard).
If you have the partition, then it will take you into a new menu, where you can select restore to factory condition.
And if you can do that, then it is great, just follow the prompt.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

AS3 rotation issue/bug need help.

Ok I have been converting a AS2 flash based sight to AS3. With the project I have to make new transitions for the pages. The client wants these transitions to be in 3d, which ive worked with before and have had no problems. However for the last few hours ive had this killer issue that wont go away.
When using rotationZ or rotationX on any element the rotation value is not based on 360 degrease but instead based on a random number. For example I can rotate a box on the stage by 0.03 and it will be ~rotated 180 degrease, but if I do the same rotation on another box on the stage it will go to ~40 degrease.
Im clueless to why this is happing and if I try to duplicate the error in another file it wont happen. So... anyone able to give me a heads up at what may be causing this?
For those asking how im rotating it.
box.rotationY = 45;
box2.rotationY = 90;

Ok... heres the min code for the error to happen my side.
If you need an XML you can make your own to test this using the fallowing structer or just use this.
---------------------------- XML Bellow ------------------------------
<?xml version="1.0" encoding="ISO-8859-1"?>
<xml>
    <page>
        <name value="Home"/>
        <background value=""/>
        <content type="text">Hello this is random text? what the hell? what the duce?</content>
        <x value="400"/>
        <y value="20"/>
        <content type="image">url to the image file</content>
        <x value="400"/>
        <y value="20"/>
    </page>
</xml>
-------------------------------- AS3 Bellow -----------------------------
package {
    import com.greensock.*; // this is a tweening class dont worrie about it
    import flash.display.*;
    import flash.events.*;
    import flash.net.*;
    import flash.text.*;
    import flash.utils.*;
    import flash.geom.*;
    public class sps extends MovieClip {
        var PAGES:MovieClip = new MovieClip();
        var p_url:String="sps.xml"; // this generates content for pages loads and works fine dont worrie about it
        var p_loader:URLLoader = new URLLoader();
        var PageList:XMLList;
        var rdy:Boolean = false;
        public function sps() {
            setFormats();
            loadPages();
            init();
        public function init() {
            addChild(PAGES);
            PAGES.rotationY = 60; // This is were the problem is!
        public function setFormats() {
            ntf.color=0xFFFFFF;
            ntf.font="Tahoma";
            ntf.size=12;
            ntf.align="center";
            ntf.bold=true;
            ntf.rightMargin=ntf.leftMargin=10;
        public function loadPages() {
            function onComplete(e:Event) {
                p_loader.removeEventListener(Event.COMPLETE, onComplete);
                var xmlData:XML=new XML(e.target.data);
                PageList=xmlData.children();
                var i:Number=0;
                while (i < PageList.length()) {
                    makePage(PageList[i], PAGES);
                    i+=1;
            p_loader.load(new URLRequest(p_url));
            p_loader.addEventListener(Event.COMPLETE, onComplete, false, 0, true);
        public function makePage(pd:XML, p:MovieClip) {
            var page:MovieClip =new MovieClip();
            var pageCon:MovieClip = new MovieClip();
            var i:Number=0;
            while (i < pd.content.length()) {
                if (pd.content[i].attributes()=="text") {
                    newText(pageCon, pd.content[i], pd.x[i].attributes(), pd.y[i].attributes());
                }else if (pd.content[i].attributes()=="image") {
                    newImage(pageCon, pd.content[i], pd.x[i].attributes(), pd.y[i].attributes());
                }else if (pd.content[i].attributes()=="video") {
                }else if (pd.content[i].attributes()=="music") {
                }else if (pd.content[i].attributes()=="subpage") {
                }else if (pd.content[i].attributes()=="slider") {
                i += 1;
            pageCon.x-=472.5;
            p.addChild(pageCon);
            pageCon.addChild(page);
        public function newText(p:MovieClip, t:String, x:Number, y:Number) {
            var tf:TextField = new TextField();
            tf.text = t;
            tf.x=x;
            tf.y=y;
            p.addChild(tf);
            return tf;
        public function newImage(p:MovieClip, u:String, x:Number, y:Number) {
            var f:URLRequest = new URLRequest(u);
            var i:MovieClip = new MovieClip();
            var l:Loader = new Loader();
            i.x=x;
            i.y=y;
            l.load(f);
            p.addChild(i);
            function ps (e:ProgressEvent){
            function lr(e:Event){
                l.contentLoaderInfo.removeEventListener(ProgressEvent.PROGRESS, ps);
                l.contentLoaderInfo.removeEventListener(Event.COMPLETE, lr);
                i.addChild(l);
            l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, ps);
            l.contentLoaderInfo.addEventListener(Event.COMPLETE, lr);
            return i;

Serious crazy problem, need help

Hey I got a serious problem. What do you do if you get the exclamation triangle and it says iTunes cannot read the contents of the iPod ~DANIEL'S IP~. Use the iPod Software Updater application to restore the iPod to factory settings. I think i saved something I shouldn't have. Can anyone help or i'm not restoring this thing properly. I'm about to go to best buy geek squad if i can't make it work

okay what if i tried to update my ipod to restore and it says ipod manager internal error. am i just screwed or what

Still image color issues - I need help quick!

I having some major color issues when trying to make a slide show.
In searching the forums I see I am not the only one, however the other answers given are not working for me.
I need this project finished today!!
Here is what I have:
Several images that have been worked over in Photoshop. They have been saved as JPEG images and brought into iPhoto. From iPhoto they have been brought into iMovie 6.02. Some have the Ken Burns effect, some do not.
They look nice and clean on the timeline HOWEVER in the preview window they all have green tints. If I use full preview mode they still have the green tint.
I have tried exporting them from iPhoto and re-entering them back into iPhoto under different names, thrown back into iMovie. Same issue.
I have tried photos that have not been through Photoshop and were not from the same source...same result.
This is not good!
I need this project done today!!!
Thanks for looking.
Does apple have phone support for software? I just got iLife 2 days ago.

Thanks for getting back to me.
Not that I am glad that it is a bug...but having no history with iMovie it does catch me up.
As far as monitor color corrections, I make my living dealing with digital images which why I was so freaked out about iMovie destroying all my work when it was brought in.
Here is what I found while waiting for a reply...which goes along with what you also told me.
The end goal of the iMovie/slideshow is to be part of an iDVD project.
When I dropped the Quicktime version of the little slideshow into iDVD the odd color cast was gone. This let me breath a sigh of relief.
I am a long time Mac user, make my living on them, would buy nothing else, but...this really should be fixed!
Thanks again for the reply.

Having 2 issues i need help with plz!!

Ok 1)... my spaces... whenever i open up the big screen that displays all the windows... they show up in a really weird way... and idk what is going on with them...
http://i331.photobucket.com/albums/l460/dante989/Picture1-1.jpg
2) whenever i take a picture of the desktop i keep getting like 2 or 3 pictures at once. the first pic is the one i want and the others r just black screens that say photo 1 (1) photo 1 (2) and so on...
can anyone help me with this please!
Message was edited by: Haseeb

whenever i open up the big screen that displays all the windows... they show up in a really weird way.
That just looks like you've set Spaces to use 16 screens (4 rows and 4 columns), even though you're only actually using 2.
Check System Preferences -> Exposé & Spaces -> Spaces to set the rows and columns to something more reasonable for your needs.
2) whenever i take a picture of the desktop i keep getting like 2 or 3 pictures at once. the first pic is the one i want and the others r just black screens that say photo 1 (1) photo 1 (2) and so on...
I have no idea on this one. How are you taking the screenshots?

Serious issues; i need help!

Similar Messages

Maybe you are looking for