Serious problem after install 126670-01 patch

Hi!
After install the 126670-01 patch (who replace the file /kernel/drv/sparcv9/scsi_vhci) the system can not boot:
/kernel/drv/sparcv9/scsi_vhci: undefined symbol 'scsi_uscsi_alloc_and_copyin'
/kernel/drv/sparcv9/scsi_vhci: undefined symbol 'mdi_pi_kstat_create'
/kernel/drv/sparcv9/scsi_vhci: undefined symbol 'mdi_pi_kstat_exists'
/kernel/drv/sparcv9/scsi_vhci: undefined symbol 'scsi_uscsi_copyout_and_free'
/kernel/drv/sparcv9/scsi_vhci: undefined symbol 'scsi_uscsi_handle_cmd' I uses the smpatch update and shutdown -i 6 -g 0 -y to install this kind of patch.
The only required pacth (120011-14) was installed before...
This bloody patch breaks all the systems where was installed and the only solution was replace the file from other unpatched system (booting using the installation DVD).
If anybody have any idea about how fix this problem, thanks in advance....
H.
Edited by: h.molina on Oct 8, 2007 12:26 PM

I had almost the same problem after patching a Sunblade 100. After following Matt's link, I found out that we had patch 125081-16 installed.
I booted it off the net, mounted the root filesystem, and patchrm'd 125081-16.
A reboot reconfigure and the system was back up again.
Here was the exact error I had:
Boot device: /pci@1f,0/ide@d/disk@0,0:a File and args:
SunOS Release 5.10 Version Generic_118833-36 64-bit
Copyright 1983-2006 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
/kernel/drv/sparcv9/scsi_vhci: undefined symbol 'mdi_pi_kstat_create'
/kernel/drv/sparcv9/scsi_vhci: undefined symbol 'mdi_pi_kstat_exists'
WARNING: mod_load: cannot load module 'scsi_vhci'
scsi_vhci: cannot load driver
WARNING: Cannot load drv/scsi_vhci
Can't load the root filesystemEdited by: Buffics on Apr 4, 2008 11:22 AM

Similar Messages

Navigation problems in IE7 after installing "BI AddOn Patch for GUI 7.10"

Hi,
I am having the following problem:
After installing the BI AddOn Patch for GUI 7.10 (bi710sp07p_701-10004472.exe), Internet Explorer is not behaving normally anymore.
The problem is as follows: When I click on a link with the CTRL-key pressed, then IE7 will open the link in a new tab. However the page does not load anymore in the new tab, the contents will stay empty even though correct address is shown address bar.
The same will happen with pop-ups, so pop-up will appear, but it will not load, page stays white.
When I uninstall the patch then IE7 will work fine again.
For clarity, I am not talking about BEx web reporting here (because we only use BEx Analyzer). The problem occurs when accessing normal webpages like Google (the problem does not depend on the website that was selected).
Anyone have any ideas how to solve this problem?

Also having the same issue doing a full patch upgrade
As a local Admin install the patches in the following order.
1.     bi710sp12p_1201-10004472.exe
2.     bw350gui710_8-10004473.exe
3.     gui710_17-10002995.exe
Getting a number of issues IE7+8 new tabs not working JRE stopped working and issues with excel (3 occasions)
Tried changing the order of the patches and doing full uninstall of sap followed by re-install of sap but the only thing which seems to work is un-install of IE, JRE and Excel then re-install. As you can imagine not very popular.
were going to try out the latest Bex7 1300 patch will let you know how its going
Jon
Edited by: Jon Hoare on Aug 27, 2010 9:38 AM

OL2010:Search Problems after install KB2956128

Hi,
We have Outlook 2010 with Exchange 2010. After installing the latest Patches for Outlook (KB2956128) we had problems with the search. We couldn't search (Advances search) in shared calendar.
Error: Outlook cannot perform your search. Outlook cannot display this view.
After unistalling this patch the search works fine. Has someone the same problem with this patch?
Thanks
florian

So glad I found this. A couple PC's in our environment that are setup to test the latest updates had OCS crash every 2 or 3 min after installing updates from the February patch release. Both PCs are running Office 2010 x32 with OCS 2007 R2.
Here is the crash message:
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:
communicator.exe
Application Version:
3.5.6907.268
Application Timestamp:                     5165ca9aFault
Module Name:                          MSVCR90.dll
Fault Module Version:                        9.0.30729.6161
Fault Module Timestamp:                  4dace5b9
Exception Code:
c0000005Exception
Offset:                                0003b4a8OS
Version:                                          6.1.7601.2.1.0.256.48Locale
ID:
1033
Additional information about the problem:LCID:
1033
Was able to at least control the crashes using this tip I found here:
OCS client crash fix
"Method one: Configure PIM to sync with None or Windows Address Book
Office Communicator does not crash if you set the PIM to sync with None or Windows Address Book. However, Communicator operates with limited Outlook Integration.
1. Start Office Communicator.
2. On the green button menu, click Options, and then click Personal.
3. In the Personal information manager list, click either None or Windows Address Book."
Unfortunately, my search function was still broken. Began to dig around on this and while I found no Office Communicator patches released and installed from the February patch Tuesday, I found it odd that KB2956128 was actually listed as
being installed twice on both affected machines.
After I removed both instances of KB2956128 and set the OCS Personal Information Manager back to "Microsoft Office Outlook (Contacts, ...." it has been running without any crash for 30 min now.
HOWEVER, I still don't have the search function in OCS after having removed KB2956128, but glad it is not crashing every 2 min.

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

Problem after installing 10.4.8

Hello,
I installed the 10.4.8 update today. I have a brand new macbook. When the update finished downloading, my screen just turned blank, my computer didn't react at all. I could hear the fan and that was it.
So, I waited for some minutes, nothing happened. I decided to restart it by pressing the power button for a few seconds.
The computer is working perfectly now and the update was installed. But, how do I know if my computer or the HD were affected? I ran the HD test and it says that the HD seems OK.
Is that a problem with my computer or is it because of the new update? I read a posting that mentioned similar problems after installing the new update.
Thanks...

How did you update? Mac OS X 10.4.8 Update (delta)?
http://docs.info.apple.com/article.html?artnum=304200
After installing the delta version of this update on an Intel-based Mac, the computer will restart two times--the first restart after installing this update may take several minutes; please allow it to complete.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
ITMS: MacOSG Podcast
 An Apple User Group 
2.0 MacBook • 100GB HD • 2GB RAM Mac OS X (10.4.7) 60G Photo iPod • AppleCare

Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

The Yosemite upgrade very often damages existing Photoshop installations. Thank Apple for that.
You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
But first, give us details about your setup:
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

DVD drive problem after installing 10.5.6

I have MacBook Pro 15",
Model Identifier-MacBookPro 2,2,
Intel Core 2 Duo 2.16 Ghz
Problem: After Installing 10.5.6 from the software update panel, my dvd drive (MATSHITA DVD-R UJ-857D) make eject sounds (sound like ejecting disc) every 10 seconds..
But if I insert cd or dvd disc into the drive, every thing is ok - no sounds, and no ejecting the disc..
Before I install this update, everyting was ok!
Please Help!!
P.S Sorry, for my english

Hi Drug;
Have you tried resetting PRAM by holding down control, option, P and R during reboot?
Allan

Hi I have a problem after install my CS6. It keeps saying MSVCR100.dll was not found

Hi I have a problem after install my CS6. It keeps saying MSVCR100.dll was not found?

32-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=8328
64-bit OS: http://www.microsoft.com/en-us/download/details.aspx?id=13523

Serious problems after Mavericks installation with External Drive Lacie P9220.

Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked!
I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully restored data from time machine backup.
So far so good but system looks unstable. Some software were not able to write on the hard drive.Some strange things happens. With Mountain Lion never had an even minor issue.
I read many discussion regarding problems with WD, just wondering if anyone had the same problems with Lacie and if there is any tip to solve the
problem.
Many thanks.
Marco

Thanks very much for your reply.
Unfortunately I couldn't find a solution because the article refers to whom have configured the drive with included software and drivers that came with the drive.
This is not my case, I never used any third party soft ...only OS X disk utility ...
best
marco

Problem after installing IOS 8.0.2

Hi there,
I have a big problem after installing of IOS 8.0.2 on my Ipad mini retina. There is no any internet connection for the applications like ITunes, App store, Facebook etc. Who can help me please for this matter? or how can I get back my previous version?
Thanks for the sopport

Hi there,
I have a big problem after installing of IOS 8.0.2 on my Ipad mini retina. There is no any internet connection for the applications like ITunes, App store, Facebook etc. Who can help me please for this matter? or how can I get back my previous version?
Thanks for the sopport

Serious external drive problems after installing Mavericks

OK, so now I am seeing multiple external drive problems. Here is my setup: A GTech 4TB drive connected to MacBook Pro via Firewire, formatted of 2 partitions of 2TB each (called GT1 and GT2). This is then daisy chained to two WD drives of 2TB each, called WD1 and WD2.
After installing Mavericks everything worked fine (in fact I have an amazing speed increase). However, after restarting my machine this morning I have the following issues:
The GTech is now a single partition called MyBook (obviously a hangover from the WD drives. I suspect the WD drive managment software) with NO data files. Interestingly it shows the following USED 1,106,870,272 bytes (1.11 GB on disk). This suggests that one of the partitions has disapeared completely.
Whilst WD 1 launces ok, WD 2 causes the Finder to relaunch whenever selected, meaning I can't get to the files. I remember having this problem before when I upgraded to SL, and it having something to do with hidden files that needed to be deleted via the terminal. However, I have searched the web and can't find the solution again.
Given that WD 1 and 2 are my backups of GT 1 and 2, then I now have a situation where I cannot access my primary or backup files for GT 2. Very impressive - not!
Can anbody remember the hidden file solution for the finder relaunch?
Can anybody help me get back my GT1 and 2 partitions (as they have the latest work on them)?

FIrewire & Thunder bolt drives are having issues with Mavericks, avoid same until a fix is issued if you can.
many are reporting same, there is a firewire fault and TB HD on external HD from LaCie (Seagate) and from WD especially.
Technicians are looking into it.
Until there is resolution, consider setting up a USB ext. Time machine HD.
Until then consider confining Mavericks use with USB HD.
Ive tested a very long line of USB HD on Mavericks, all seem fine.
Recommend anyone DO NOT ATTACH any WD MyBook externals (firewire, thunderbolt or otherwise).
I dont have same to test, so I dont know if the problem is in the firmware on the SATA bridge or if its a problem with the WD software

Problems after installing Bootcamp 3.1

Hello everyone.
I had installed Windows 7 64 bit Ultimate in a Bootcamp partition. I used the SL disk to install Bootcamp 3.0 which, with some audio related problems which were solved by changing the drivers, worked well. All sounds played, the graphics card behaved normally, etc.
Recently I got the alert of a Bootcamp update, 3.1, as we all know. After installing it without a hitch, small problems began to pop up.
First, no Windows startup sound played anymore, and there has been no way for me to make it work again. I've gone to countless forums and gone through an endless barrage of suggestions, including a complete formatting, but it always leads back to the same, isolated problem: Startup sound plays in BT 3.0, doesn't play anymore in BT 3.1.
But more importantly, after pretty much giving up with the startup sound issue (it's only that particular sound, in the login screen, so I decided to ignore it's absence), more problems appeared. Initially, all system tray icons appeared swiftly. Now the main ones, Sound, Wireless Connection and Battery appear fast, but the rest take at least 5 minutes to appear. This is again something that wasn't present in Bootcamp 3.0.
Yet another problem, this one I consider is the most important, and the real reason for this post of mine, is that Bootcamp 3.1 brought a serious driver problem with my Macbook Pro's 9400M video card. Doing the most stupid of tasks such as opening the video card's control panel from the Desktop gives me the following error:
"The NVIDIA Display Panel extension cannot be created.
Possible reasons include:
Version mismatch. Reinstalling the drivers may solve this problem."
Now, the Device Manager shows no errors in hardware-driver smoothness in any aspect, yet it's clear that the driver that BT 3.1 installs for the video card was either faulty or old, or for another OS. I went to NVIDIA's site to manually get the driver, but it turns out that they offer no NVIDIA GeForce 9400M drivers for Windows 7 64 bit. So I wonder, how come it worked before? Because in Bootcamp 3.0 the Control Panel would open flawlessly.
So this is serious. Gaming has also turned into a nightmare, since the problem with the video card negatively affects the smoothness of the gameplay. Apple, things weren't working 100% with BT 3.0, but BT 3.1 far from making things better just got everything worse.
I ask everyone here if there is a known solution. Should I install the NVIDIA GeForce 9400M drivers for Windows 7 32 bit? Why doesn't the driver installed by BT 3.1 function as it should when it's supposed to be covering Windows 7 compatibility? Why are the barrage of audio errors present in BT 3.1 and not in BT 3.0? What happened with my startup sound?
Apple, you're offering the possibility for your users to user Windows for compatibility and gaming. You market your Macs are fully compatible and flawless even running Windows. Don't come about saying this is not your problem, it is. It's your drivers, you develop them, you give them to us. If they don't work, you must do something about it. If not, then stop offering the Bootcamp service completely. If you're gonna do something, do it well.

http://www.nvidia.com/object/notebookwinvista_win7_x64_195.62whql.html

IBooks seriously unstable after install of iOS 8

Since installing iOS 8 on my iPad (128 GB) iBooks is showing serious instability.
Background: I use my iPad principally as a library. No music, films, videos or games, but a number of mainly productivity apps. iBooks has worked very well. Over several years i have built up a library of 1 231 ePub titles (sorted alphabetically by author, and chronologically for each author) and 3 251 pdf documents (more complex sorting order).
After installing iOS 8.01, most of the books and docs disappeared from the iPad. The iBooks interface in iTunes had the missing items ticked and items still on the iPad unticked. There was no way I could make the interface work normally. No difference after installing iOS 8.02 so in the end i restored the iPad from the backup on my computer (everything was restored, except opsys which remained 8.02). Same issues remained. So i deleted and reinstalled iTunes. Same problems remained. So I deleted all items in the library. I have now started reconstructing the library (re-transferring and sorting all the ePubs and pdfs is going to take months - one of the issues is that all titles are flagged as ‘new’ and I have to open and close them to get rid of the blue ribbon on the cover image - is there some way of turning off this pesky and unwanted function ?). I have started with the ePubs. After having reached abt 400+ titles odd things have started to happen. The whole collection sofar was suddenly unticked and all titles disappeared from the iPad. After ticking all 400+ again manually, I managed to reinstall them all. But now, if I transfer further titles to the iPad, or delete some, the iPad is wiped practically clean (only iTunes-bought titles remain plus a random few more) and the sync sequence, after first wiping the titles, then reinstalls them all again - which takes a while. The reinstall works - ‘new’ ribbons do not reappear, the order of the titles is preserved, but transferring titles has become infinitely more time-consuming. More background: I use Calibre as interface between my computer (where all titles are stored) and iTunes. This interface works without a hitch. Titles are added or deleted from iTunes with perfect precision. It is the syncing of iTunes with iPad which is now completely unstable. I am very disappointed. I have invested a lot of time and energy (and money) creating a common eLibrary for all my titles on iBooks. Basically re-purchasing masses of print titles as e-titles. Apple has usually managed to upgrade its operating system without any glitches. They have normally dotted all the i:s and crossed all the t:s before releasing a new version (at least as far as iBooks are concerned). This time they didn’t, and I am severely affected. And I can’t even report this problem to Apple (support timed out!) so have to use the forums to make the issue known.
I have run a sync diagnostic test which turned up no problems. Ideas, anyone ?

Hello jrdtnpsp,
Thanks for using Apple Support Communities.
Please check your restrictions as directed in the support article below to ensure that either your restrictions are disabled, or Safari is not disabled.
iOS: Understanding Restrictions (parental controls)
Take care,
Alex H.

Serious problem after install 126670-01 patch

Similar Messages

Maybe you are looking for