Navigation problems in IE7 after installing "BI AddOn Patch for GUI 7.10"

Hi,
I am having the following problem:
After installing the BI AddOn Patch for GUI 7.10 (bi710sp07p_701-10004472.exe), Internet Explorer is not behaving normally anymore.
The problem is as follows: When I click on a link with the CTRL-key pressed, then IE7 will open the link in a new tab. However the page does not load anymore in the new tab, the contents will stay empty even though correct address is shown address bar.
The same will happen with pop-ups, so pop-up will appear, but it will not load, page stays white.
When I uninstall the patch then IE7 will work fine again.
For clarity, I am not talking about BEx web reporting here (because we only use BEx Analyzer). The problem occurs when accessing normal webpages like Google (the problem does not depend on the website that was selected).
Anyone have any ideas how to solve this problem?

Also having the same issue doing a full patch upgrade
As a local Admin install the patches in the following order.
1.     bi710sp12p_1201-10004472.exe
2.     bw350gui710_8-10004473.exe
3.     gui710_17-10002995.exe
Getting a number of issues IE7+8 new tabs not working JRE stopped working and issues with excel (3 occasions)
Tried changing the order of the patches and doing full uninstall of sap followed by re-install of sap but the only thing which seems to work is un-install of IE, JRE and Excel then re-install. As you can imagine not very popular.
were going to try out the latest Bex7 1300 patch will let you know how its going
Jon
Edited by: Jon Hoare on Aug 27, 2010 9:38 AM

Similar Messages

After installing the safari update for windows outlook is not opening email links. I have set safari as my default browser but hyperlinks won't open a browser window - I get an error message - "This operation has been canceled due to restrictions in effec

After installing the safari update for windows, outlook is now not opening email hyperlinks. I have set safari to be my default browser but outlook won't open it when I click a link. I get the following message: "This operation has been canceled due to restrictions in effect on this computer. Please contact your system administrator." Please help.

Hi mcclausky, you may need to manually remove a policy setting from the registry. You also should scan for malware that might have created this problem.
This article lists scanning and cleaning tools other Firefox users have found helpful: [[Troubleshoot Firefox issues caused by malware]].
To check your Windows registry for policy settings that might affect Firefox or other programs, I suggest consulting a Windows forum or Microsoft's forums. For example:
* http://windowssecrets.com/forums/
* [http://answers.microsoft.com/en-us/windows/forum/windows_8-system/this-operation-has-been-cancelled-due-to/9677848e-072d-4206-87f4-9da9284d6151 This operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. - Microsoft Community]
* [http://answers.microsoft.com/en-us/windows/forum/windows_xp-security/restrictions-this-operation-has-been-cancelled-due/8af1d0cd-8fbd-4223-9396-86d7497bb275 Restrictions. This operation has been cancelled due to to restrictions in effect on this computer.Please contact your system administrator. - Microsoft Community]

ITunes Error 7 (Windows error 127) after installing iTunes 64-bit for Windows

After installing iTunes 64-bit for Windows (latest build), I get an error pop-up saying:
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 127)
I've gone thru the uninstall, reboot and reinstall process three or four times now. Still nothing.
Furthermore, after clicking okay to the error, it continues to pop up on it's own every 45 seconds or so.
There was one other error I came across after trying to launch iTunes after installation.
See both error messages here:
http://screencast.com/t/DSg4PpKF5BeX

Brilliant. Thanks a lot. I've wasted a couple of hours on this nasty bug, & trying all the other suggestions across various threads again and again.
I now find I had the same registry entry hanging on, despite uninstalling & wiping everything again and again. Having now deleted this key, (I don't even have an iPod), & iTunes 11.1.14 now opens at long last.
But WHY is this bug not fixed? Enough people are suffering with this across the forum. WHERE is Apple support on this?
It should have been added to their page at
http://support.apple.com/kb/HT1923
by now, why hasn't it???
It's not good enough!
Re:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\SharedDlls]
"C:\\Program Files\\iPod\\bin\\iPodService.exe"=dword:80000000
AHA! This entry for iPodService.exe still exhisted. So I had no folders on the PC, no installs on the PC and no services running.... BUT this was still in the Registry.
Step 5 - Delete only the Registry entry above. NO REBOOT
Step 6 - Reinstall iTunes64.exe

Mail gave error message, failure to move e-mail to trash can. Mail has frozen and will not quit and is stopping a machine shutdown. Problem persisted even after power was trend off for a minute.

Mail gave error message, failure to move e-mail to trash can. Mail has frozen and will not quit and is stopping a machine shutdown. Problem persisted even after power was trend off for a minute.Iideas please

OS X: How to quit an unresponsive application using Force Quit
Back up all data. Rebuild the mailbox. Try to delete the message again.

I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?

http://www.synapse-audio.com/

After installing ios7 its asking for a pin number now its disabled how do i carry on

after installing ios7 its asking for a pin number now its disabled how do i carry on

During the update, you must have entered a 4 digit passcode. You must use the same 4 digit to unlock.
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097

Bluetooth problem with MBP after installing 10.6.8

hi there,
my one is a mbp mid 2010 model. i've bought it on this february and it was running like a charm. but from yesterday, the bluetooth stopped working. there is a thunder sign over the bluetooth icon and if i click on it, it says "bluetooth: not available".
i upgraded to 10.6.8 at 2/3 days ago, but after that upgrade i didn't check the bluetooth status, so i'm not sure if this problem is from the update or just a coincidence of having a hardware problem after getting the update.
i've spent 2 whole days looking for a solution of this problem and hav tried every possible solution provided on forums. i've tried restarting several times, resetting pram and smc, verifying and reparing disc permission etc........ but none of them works.
i hav a windows partition through bootcamp. i've reinstalled the windows today and there also, i cant find anything about bluetooth. i think, that is a clue for having a hardware issue. again, i've done apple hardware check (both of the short and the extended one) with both of the mac installation disk and the application disk, and none of them has shown any error. shouldn't it detect a hardware problem?
the bluetooth doesn't work also from the safe mood. in 'about this mac', at the place of bluetooth, it doesn't show any connected device.
i'm really confused here. i did not have this problem on 10.6.7. pls help me with it, as bluetooth is very essential for me, mostly for connecting on the internet.
any help will be appriciated.

Just back everything up... pop the dvd in; erase the partition in disk utility and create a fresh install of Snow Leopard.... If it's not hardware related everything should work... Sometimes it's not the update itself but applications of various and diverse users that can cause the problems... It would be impossible for apple to know about all the various combinations of software that can cause these problems.... When in doubt... I back my stuff up and install a fresh copy... (ERASE THE PARTITION) not just install over mac osx again. But have you tried installing over your copy of osx yet? Its not like windows... you don't lose anything when you install OSX again... You only lose your data if you erase the partition!!

Has anyone experienced problems with Outlook after installing Mavericks?

Has anyone else experienced problems using Microsoft Outlook after installing Mavericks? The computer seems to want to continue reloading emails.

RobertRTillman wrote:
1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
In short, we are screwed and neither company seems to care.
In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

Problems with safari after installing Windows 8

After installing Windows 8 , i can't access some websites in Safari
For example i can't login on Binck bank or a webshop
After fill the login details the program file runs , but the login screen remain and the login details diappaers and gone white.
This is on a few websites where i have to use login details but on others such as webmail acounts it works normal.
I have set up safari again and again without succes
What can i do to solve this?

Use IE, FireFox, or Chrome and see if the problem remains. My experience is that Safari has never worked well on Windows.

Problems con opcenum after installing LabView 2014

After installing LabView 2014, all other OPC compliant software (Matlab with the OPC Toolbox, Wonderware SCADA, OPC Demo Client from Softing, ...) previously installed on my PC (Windows 7) started to have problems in browsing OPC Servers. They were unable to connect with opcenum service for listing installed OPC servers. After manually unregistering opcenum and registering again as a service (and cleaning the windows register), everything was solved.
So I guess there is a bug with the labview installer that mess things up with the opcenum service. I haven't found anything on the web but in case anyone has the same problem, this is the "manual" solution. Anyway, I would like to ask NI to revise the problem.
Regards,
Jesús

Hello,
I haven´t heard of this issue with a standard LabView install, however there is a known issue with the standard DSC install. Have you installed DSC 7.1? If so you need to go in and modify the DSC install to uninstall the "Keyboard Filter". The filter causes the computer to hang when it attempts to suspend.
Regards
Thomas D.
NI Germany
(SRQ 202575)

Serious wifi problems with iMac after installing Mountain Lion

After installing Mountain Lion, I'm experiencing serious trouble with wifi. I noticed that some people had this before with Lion. Can anybody help to solve this problem or should I downgrade to Mountain Lion?
Please help
Thanks in advance!

Thank you for the information Arizonadonn! I'll install 10.8.1 this evening. I really hope you're right after having connection troubles for almost a month now .
If this solves my problem, you'll be my hero !

Problems playing sound after installing 10.4.4

After installing 10.4.4 update, i have a problem when i play some mp3 file in itunes or quicktime 7.0.4, it sounds with jumps and cracking. I've reinstalled the update using the combo, repair permisions, reinstalled quicktime and nothing happens.
Any suggestion?
Thanx

After upgrading to OS 10.4.4 I have no startup chime or sound. I to tried changing the Audio MIDI Setup application (located in Applications/Utilities) and changing the output setting to different settings and back to 44 KHz (44100.0 Hz). It made no difference.iMac G5, 2.0, 20", 1.5g Mac OS X (10.4.4)
iMac G5, 2.0, 20", 1.5g Mac OS X (10.4.4)

Problems shutting down after installing 10.5.3 update?

Has anyone had any problems shutting down there IMac's after installing 10.5.3 update? I've tried shutting down twice and the image that appears when shutting down seems to go in an endless loop an doesn't shut down.

Can you restart from the menu and hold the shift key down, until the Mac
boots in a SafeBoot login screen; then choose Disk Utility (shortcut under
GO in Finder window, to Utilities folder) and run 'repair disk permissions'
then restart the computer normally...(?)
You may also have to consider starting the computer from the OS X
installer disc and choose from an option menu there (not to install)
and choose to use Disk Utility from the booted installer disc, to run
'repair disk' from there? You could also run 'repair disk permissions'
while booted from that installer disc, but maybe you'd still have to
repair those from the running system for best effect once it is back
running from the hard drive's system.
Some minor issues can happen after an update, usually just repairing
disk permissions before installing the update, and/or running up in
SafeBoot, can help. There are other things to try and do, if these don't
help that much. The state of the system prior to an update is important;
since an update can't fix anything otherwise non-related to an update.
Maintenance issues aside, after you repair disk permissions, safeboot,
and restart, if there still is an issue, you could try to download the Combo
OSX 10.5.3 update file and install it over your system; and then repair
disk permissions again after it finally restarts normally.
Was the 10.5.3 update a smaller (delta) file or was it the Combo (large) file?
Good luck & happy computing!

Problem with chess after installing Leopard

The other week I did an Archive and Install of Leopard on my MacBookPro running Tiger. Several applications failed to work following the install and this has been solved by downloading new versions. Although chess seems to be more problematic. Every time I launch chess I just get a message saying that chess has unexpectedly quit. However this behaviour is starting to become expectable. I have read other posts reporting similar problems after installing Leopard however they are able to play a couple of moves before it quits. For me chess does not even launch.
I have tried trashing the preference file, creating and using a new user account, and copying chess from another computer. The copied application just states that I can not use chess with this version of OSX.
Does anyone have any ideas as I really do not want to have to reinstall Leopard just for a application I only use when very bored (which is surprisingly often).
Thanks for any help you can give.
Chuck

Thanks for pointing out that app. Very useful indeed.
I have deleted my copy of chess and reinstalled a new copy from the OSX Leopard install disk and it still fails to launch.
Any other ideas?

Problems hotsynching addresses after installing Leopard

I've had no problem synching my Tungsten E2 before, but after installing Leopard on my MacBook, the addresses are no longer synching either from my Mac to my handheld or vice versa. The calendar seems to be synching just fine. There's nothing wrong with my conduit setting and the messages tell me the synch "has worked" but obviously it hasn't--there's no changes in either address book. I have addresses both on the computer and the handheld now which don't exist on the other, so I don't want to do a complete override.
I called Palm Tech support and plunked down my $14.95 and the woman there could only tell me to check my conduit settings, something I had already done. No help there.
Also, there are some addresses that are more up to date and correct on one device or on the computer and I can't figure out how to compare the two so I can choose the most recent changes to be the "master."
I'd love any help you can give me. the first problem, obviously is more pressing!
Thanks, Laura
Post relates to: Tungsten E2

Same here with a Centro/ palm phone from Verizon. It's picking up the phone numbers, but leaving nothing for the addresses. It was working fine with synching both addresses and numbers, but it seems like after the latest update, it dropped the addresses. Will be searching other forums for an answer. Using a MacBook Pro with 10.5.5. (Although registering for this forum I could only chose 10.4 as my operating system. Come on Palm... you do know Apple has released a new OS, don't you?)
Post relates to: Centro (Verizon)

Navigation problems in IE7 after installing "BI AddOn Patch for GUI 7.10"

Similar Messages

Maybe you are looking for