Server 2012 not visable in AD after IP change
Running a single server 2012 in this environment so it hosts everything such as AD, DHCP, DNS etc.
I changed the network IP scope due to VPN issues for users who connect from home networks using the same IP range. During the IP range change I changed the servers own static IP addresses, reconfigured DHCP scope and reservations and the DNS server.
Everything in the network is working properly expect that this single server does not show up for clients looking in their Network list of computers.
I've missed something in the process but not sure what that something is. Any ideas how to get the server to reappear?
Thanks
Under the "Everything in the network is working properly" heading, I presume this means dns resolution is functional, users are being authenticated, able to release/renew ip addresses, etc. I hear you saying it's just the browsing issue.
Network Discovery in my experience is based on broadcast traffic and therefore less reliable than, for example, the DNS table. So there are a few angles here.
-It's conceivable that through time and a refreshing of the caches both on the networking equipment and at the clients that this will pick back up for you.
-You might consider refreshing or rebooting the router so that it repopulates it's tables and the aforementioned cache can be ruled out.
-I suggest picking a client to test from. Restart and see if it picks back up. a difference. Map a drive or browse the UNC path of a share from the Run line and see if the server then populates.
These are just some suggestions to get you started. Let me know what shakes out, as there are certainly many more things to try based on what you're seeing. Hope this helps.
Similar Messages
-
Download Windows Server 2012 (not R2) evaluation copy
Hi,
If I try to download the windows server 2012 (not R2) evaluation copy from http://technet.microsoft.com/de-de/evalcenter/hh670538.aspx, I always get a Windows 8 ISO (9200.16384.WIN8_RTM.120725-1247_X64FRE_SERVER_EVAL_DE-DE-HRM_SSS_X64FREE_DE-DE_DV5.ISO)
Thats not that what I'm looking for. :-(
I need to do some compatibility checking for server 2012, therefore I need the ISO image to install on a server.
GReets
MichaHi Micha,
I checked the download link and the ISO file name. It should be OK. As Tim mentioned, would you please
let us confirm whether you had installed via this ISO file? After installation, did you find it was a Windows 8, not Windows Server 2012? Just a confirmation. Thanks for your understanding.
In addition, if
you use the link (English version) as Farhad suggested, will encounter the same issue?
Best regards,
Justin Gu -
I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?
Yes you can install SQL server 2008 express on windows 2012 OS see below link
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx#Express32
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Apple tv not accepting itunes password after i changed it on the computer
Apple tv not accepting itunes password after i changed it on my mac. Mac opening itunes account with that password
I don't have Apple TV, but are you able to log out of your account on it and then log back in with the new password so as to 'refresh' the account on it ?
-
SharePoint Foundation 2013 installed on Windows Server 2012 not sending out email notification
I have a server where i installed SP Foundation 2013 on top of Windows Server 2012. I have configured the SMTP as well as the outgoing SMTP in Central Administration
of SharePoint. When i create an alert on a document library, its did not sent any email notification on the changes made to the document in the document library. So, i created a workflow to send out email using SPD2013. The workflow run, but it cannot sent
out email with error saying that outgoing email is not configured correctly. I have checked with another server which i installed SP foundation 2013 on top of Windows Server 2008 R2 - its sending out email just fine using same configuration and outgoing SMTP.
I need help to resolve this issue or at least the cause of the problem.
Any help is greatly appreciated.
Try below:
http://social.technet.microsoft.com/wiki/contents/articles/13771.troubleshooting-steps-for-sharepoint-alert-email-does-not-go-out.aspx
Go to Central Admin ---->Operations----->outgoing email settings and verify that SMTP server is mentioned correctly
2) Test the connectivity with the SMTP server.
In order to do that follow these steps:
Open cmd
telnet <SMTP server name> 25 ( We connect smtp server to the port 25)
you should see a response like this 220 <servername> Microsoft ESMTP MAIL Service, Version: 6.0.3790.3959 ready at date and time
Beware that different servers will come up with different settings but you will get something
If you dont get anything then there could be 2 possible reasons, either port 25 is blocked or
the smtp server is not responding.
For testing response from your server
For testing response say ehlo to it.
Type :
ehlo <servername>
output:
250 <servername> Hello [IP Address]
Now a test mail can be sent from that SharePoint server.
Now we need to enter the From address of the mail.
Type :
mail from: [email protected]
output:
250 2.1.0 [email protected]….Sender OK
It's time to enter the recepient email address.
Type : rcpt to: [email protected]
output:
250 2.1.5 [email protected]
Now we are left with the data of the email. i.e. subject and body.
Type : data
output:
354 Start mail input; end with <CRLF>.<CRLF>
Type:
subject: this is a test mail
Hi
This is test mail body
I am testing SMTP server.
Hit Enter, then . and then Enter.
output:
250 2.6.0 <<servername>C8wSA00000006@<servername>> Queued mail for delivery
Type: quit
output:
221 2.0.0 <servername> Service closing transmission channe
3) Check alerts are enabled for your web application
verify if the windows timer service is running or not.
Run this stsadm command to check that
Stsadm.exe -o getproperty -url http://SharePoint-web-App-URL -pn alerts-enabled
This should return <Property Exist="Yes" Value="yes" />
If you don’t get this, Enable alerts by:
stsadm.exe -o setproperty -pn alerts-enabled -pv "true" -url http://SharePoint-web-App-URL
If its already enabled, try turn off and turn on it back.
4) Check the Timer job and Properties
Go to
MOSS 2007: Central Administration > Operations > Timer Job Definitions (under Global Configuration)
In SharePoint 2010: Central Administration > Monitoring > Review Job Definitions
Check whether the "Immediate Alerts" job is enabled for your web application. check these properties:
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
stsadm.exe -o getproperty -url "http://Your-SharePoint-web-App-URL" -pn job-immediate-alerts
The expected output is:
<Property Exist="Yes" Value="every 5 minutes between 0 and 59"/>.
If you don’t get this, run the following command to set its value.
stsadm.exe -o setproperty -pn job-immediate-alerts -pv “every 5 minutes between 0 and 59" -url http://Your-SharePoint-web-App-URL
5) Check whether the account is subscribed for alerts and it has a valid email account. This should be the first thing to check if the problem persists for some users not for all.
6) Then check if at all those users have at least read permission for the list. Because the first mail should go out for every user without security validation but the next ones won't be delivered unless the user has at least read
permission.
7) If it is happening for one user, can also try to delete and re add the user in the site.
8) Most importantly , you should try this one.
Run this SQL query to the content db < Select * from Timerlock>
This will give you the name of the server which is locking the content database and since when.
In order to get rid of that lock
Go to that server which is locking the content db and then restart the windows timer service.
within some time it should release the lock from content db, if not then at the most stop the timer job for some time
Once the lock will be released then try to send some alerts
You will surely get the email alert.
I found this is the most probable reason for alert not working most of the time. We should start troubleshooting with above steps before coming to this step for any alert email issue but from step 1 to step 7 are best for new environments or new servers.
If the issue is like this ,alert was working before and suddenly stopped working without any environmental change then above conditions in step 1-7 should be ideally fine.
Even after this if it is not working, then you can try these few more steps too
9) Try re-registering the alert template:
stsadm -o updatealerttemplates -url http://Your-SharePoint-Web-App-URL -f "c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\XML\alerttemplates.xml" -LCID 1033
10) Try to clear the configuration cache
If this helped you resolve your issue, please mark it Answered -
Server 2012 R2 Network Teaming Issues After Adding WOW64 Feature
Recently I have had a specific issue adding the WOW64 feature to an active Server 2012 R2 server in core mode (no management). The server had two active virtual machines. A server 2008 R2 in version 1 mode and a 2012 R2 in version 2.
All were up2date as of April 10 2015. This was a domain connected core with domain connected virtual machines. We are the domain administrator.
After using powershell to install WOW64 and issuing a restart we lost all external network connectivity to the server once the server came back up. From the console we could ping 127.0.0.1 and all the network addresses of each VM but not the
default gateway or any address on the local network. We tried several resolutions including disabling all firewall rules and assigning a known VLAN but nothing worked. Something went completely haywire within Windows 2012 R2 and network teaming
and the virtual switch that supplies the VM's with communication.
What we had to do was remove one of the physical network adapters from the team using powershell from the core console. We then assigned an address to the nic and whallah we were able to remotely communicate to the server again but the problem
still remained with communicating to the team.
After hours of trials we finally stumbled on a solution deleting the hyper-v virtual switch though a remote console, then the team through powershell. This of course broke all the hyper-v VM's. We said f'it and rebooted.
This is the magical combination apparently
We then recreated the team using the remote management GRAPHICAL widget using every physical EXCEPT the nic we were communicating to. Then we recreated the hyper-v virtual switch remotely again with the GRAPHICAL widget and assigned
it an address using the command line sconfig tool. We then went into the GRAPHICAL hyper-v manager and assigned all VM's to the new virtual switch. WOW everything works again
Let me just say here in this post that the lack of graphical management in CORE mode is a complete nightmare. The fact we have to use some graphical tools to perform certain tasks and the command line for others is just silly. The sconfig.exe
tool should have built-in teaming commands as inexperienced remote administrators are very difficult to work with over the phone trying to explain spelling of the upper/lowercase commands.
This post is more informative than really asking a specific question but if I were to ask one I'd ask, why did installing the WOW64 feature and rebooting break the external communication of the team and the virtual switch?Hi gettnmorebetter,
Could you try to confirm whether you have in the following situation, if you do not found the related symptom please try to install the latest update then monitor the issue
again.
Event ID 106 when a Hyper-V virtual switch is bound to an LBFO team
https://support.microsoft.com/en-us/kb/2974384
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
New Windows Server 2012 install won't boot after installing Hyper-V role.
I have just installed Windows Server 2012 onto a Dell PowerEdge R310. Everything worked okay until I installed the Hyper-V role. After that, when it tries to boot, I get "Your PC ran into a problem and needs to restart. We're just collecting
some error info, and then we'll restart for you. (0% complete)" for a split second, then the system reboots into Automatic Repair mode.
In Automatic Repair mode, my options are Refresh your system (which tells me the drive that Windows is on is locked), Reset your system (which tells me there is no partition), and Automatically Fix your PC (which tells me it can't fix it).
I have updated to the latest version of the BIOS (1.11.0, which Dell states adds Windows Server 2012 support).
I'm at a loss.. I've tried everything I can think of. Has anyone run into this issue and figured out a solution? The only references I can find to this issue talk about Gigabyte motherboards with USB 3.0, but this server pre-dates USB 3.0 by
quite a bit.Hi,
Not only the BIOS but the iDRAC and storage part also need to ne up date check, have a look at the following list to see what you need for Server 2012:
http://en.community.dell.com/techcenter/os-applications/w/wiki/3868.dell-bios-support-for-windows-server-2012.aspx
If any info was collected during the error then have a look in the event viewer or look for a kernel/memory dump file so you can try to find the issue, in many cases a driver, anti-virus sofware or 3rd part service can cause these kind of issues.
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer
MCSE:Server Infrastructure, MCSE:Desktop Infrastructure, MCSA Server 2012, Citrix CCIA & CCEE, Cisco CCNA, VMware VCP 3/4/5 Blog: http://www.citrix-guru.com and http://www.rds-support.eu Twitter: @dnyvandam -
Windows 8 & Server 2012 not reflecting in updates category in SCCM 2012 SP1 console
Hi,
We are using SCCM SP1 with CU4 on server 2012. I am not able to see the windows 8 and server 2012 in the updates category for patch management.
Any Idea?They should appear after the first successful sync.
Torsten Meringer | http://www.mssccmfaq.de -
Server 2012 not accepting inputs either via console or RDP
Hello Experts,
I have a server 2012 standard running in a physical box with 3 virtual machines running in hyper-v session. For sometime now, i have been running into strange issues where it does not accept input. I tried via RDP, console; neither method worked. It still
holds AD and file server role. It was all working good and driving me into issues for some time now.
It does not accept inputs via keyboard or mouse either from console or RDP. All resources such as file share, virtual machine are accessible from network. I can logon to server via console or RDP for 3 to 5 min right after server has been hard restarted
and again it stops accepting inputs.
Can someone help me out work around this issue as i am new to server 2012 and not sure what goes in error.
Thanks.Hi koneska,
Did you install any software recently? Please try to unistall the new installed software and if you have AV soft disable the AV soft then try again.
Regards.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Server 2012 - iSCSI Virtual Disks Missing After Reboot
Hi guys. I recently had to reboot my Windows 2012 Storage Server. When it came up, the physical disks that the iSCSI virtual
disks reside on were visible, as were the VHD files, but the targets were gone. I looked in the File and Storage Services -> iSCSI but it says 'There are no iSCSI virtual disks', even though the VHD files are clearly there. When I try to import
the already existing ones, it gives me an error because that file already exists in the place I want to put it. These are very large VHD files so moving them to other storage and then re-importing them could take days, if not longer.
The iSCSI targets are still visible under 'View All Targets', but they are no longer associated with their VHD files. How do I reassociate
them? And why did the list of VHD files in File & Storage Services->iSCSI disappear in the first place!?
Thanks for any help!
-WarrenHi guys. I recently had to reboot my Windows 2012 Storage Server. When it came up, the physical disks that the iSCSI
virtual disks reside on were visible, as were the VHD files, but the targets were gone. I looked in the File and Storage Services -> iSCSI but it says 'There are no iSCSI virtual disks', even though the VHD files are clearly there. When I try
to import the already existing ones, it gives me an error because that file already exists in the place I want to put it. These are very large VHD files so moving them to other storage and then re-importing them could take days, if not longer.
The iSCSI targets are still visible under 'View All Targets', but they are no longer associated with their VHD files. How do I reassociate
them? And why did the list of VHD files in File & Storage Services->iSCSI disappear in the first place!?
Thanks for any help!
-Warren
Replying to this question to answer it with a working solution. I'm not sure what the other replies marked as answers to this post are trying to answer, but they are completely unrelated to this topic. It appears they are describing a fix for a server acting
on the initiator side connecting to a target, not a server acting as an iSCSI target hosting LUNs. Very frustrating to say the least.
I ran into this problem over a weekend maintenance project where I rebooted a Server 2012 R2 File Server to enable some updates. When I logged back in, the iSCSI section was blank and my two existing iSCSI virtual disks had vanish. Now with that said the
underlying file system that the VHDX files were located on was intact. I tried to import them and got the same error that the path was already in use.
I first tried the fix mentioned lower in this thread where you move the VHDX file into another folder to change the path. That worked, but I wanted to figure out exactly why it broke and get my old file to load as it should. Now I don't know the answer to
"why" but I found a way to clear the existing information stored that is preventing you from re-mounting the existing iSCSI files without changing the path.
From this page, there are PowerShell scripts outlined to change iSCSI parameters from the command line.
http://blogs.technet.com/b/filecab/archive/2012/06/08/iscsi-target-cmdlet-reference.aspx
This command in particular deletes the record of unassigned virtual disks that aren't assigned to a target:
$AllDisks | where {$AssignedDisks -notcontains $_} |
foreach {Remove-IscsiVirtualDisk $_ }
After running that command that broken link that had existed prior was removed and I was able to re-mount my iSCSI virtual disks without that error coming up.
As always, make sure you have a backup before you try any odd powershell commands. That one worked for me. -
Upgrade from ADFS 2.1 to ADFS 3.0 and stay on Windows Server 2012 (not R2)
Hello,
could you tell me if this is possible? We need to stay on the same OS 2012 (not R2)?
Are the 2 versions compatible, i.e if we upgrade the secondary to ADFS 3.0 will the primary on ADFS 2.1 still sync to it, and will the farm respond on either host?
Thanks,
TimThe upgrade procedure is described here: http://blogs.technet.com/b/askpfeplat/archive/2014/03/31/how-to-build-your-adfs-lab-part4-upgrading-to-server-2012-r2.aspx
More if you ask them in this forum: https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Remote Desktop Session Host on Server 2012 not domain-joined
I have a server 2012 which is running Remote Desktop Session Host role without the Connection Broker like described here:
http://support.microsoft.com/en-us/kb/2833839
Now the client would like the Network Level Authentication (NLA) disabled. And since server 2012 does not have the Remote Desktop Session Host Configuration tool, I have to use the server manager console.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/630cc818-69b0-4e1c-8d65-1b895b20e203/where-is-the-remote-desktop-session-host-configuration-tool-in-server-2012-?forum=winserverTS
But when I go to the remote Desktop Services of Server manager, it says “You are currently logged on as local administrator on the computer. You must be logged on as a domain user to manage servers and collections.”
So I tried finding some Powershell cmdlet could help me with the problem. I guess
Get-RDServer
or Set-RDSessionCollectionConfiguration would be the ones but I can’t seem to make them work.
Any help, or a hint that I going in the right direction or not?Hi,
Have you configure the certificate for your server?
Add the user under Remote Desktop user local group, configure FQDN name of server. Please see that if we are using RDS server in workgroup then most of the tools provided to make managing/configuring RDSH servers easier in 2012 will not work in a workgroup
configuration including some PowerShell command. You can check the below article for information.
Deploying a RDSH Server in a Workgroup – RDS 2012 R2
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Server 2012 (not R2) RODC fails to install Windows Updates
Good morning all
Since around October, our 80-odd 2012 (non-R2) RODCs have been failing to install windows updates, rolling them back on reboot. Patches that don't require a reboot are fine. The short version is, please log a call with MS and reference this thread, if you're
having this issue as currently they're saying they won't fix this!!
Our product support group opened an official case and reported this with Microsoft and they've found the cause. PLEASE NOTE however, that this relates to RODC and ALL patches failing, not just 3000061 on non-RODC.
There was some chat relevant to this as originally it was thought KB3000061 was to blame, and a few other people had had the same issue there (see links at the bottom). I think however, that this issue now stands alone as any patch we try to install will
fail.
000093 2015-01-23 20:18:30, Info CSI 00000015 Begin executing advanced installer phase 38 (0x00000026) index 4 (sequence 43)
000094 Old component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.16384, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000095 New component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.17100, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000096 Install mode: install
000097 Installer ID: {118ca598-79a0-4297-953d-e82183960fd2}
000098 Installer name: [13]"Group Trustee"
000099 2015-01-23 20:18:30, Error CSI 00000001@2015/1/23:20:18:30.673 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000100 [
000101 (null)
000102 ]
000103 [gle=0x80004005]
000104 2015-01-23 20:18:30, Error CSI 00000002@2015/1/23:20:18:30.673 (F) CMIADAPTER: AI failed. HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000105 Element:
000106 [372]"<groupTrustee xmlns="urn:schemas-microsoft-com:asm.v3" name="WinRMRemoteWMIUsers__" description="Members of this group can access WMI resources over management protocols (such as WS-Management via the Windows Remote Management service). This applies only to WMI namespaces that grant access to the user." type="User" enabled="true">
000107
000108 <members></members>
000109
000110 </groupTrustee>"
000111 [gle=0x80004005]
000112 2015-01-23 20:18:30, Error CSI 00000003@2015/1/23:20:18:30.673 (F) CMIADAPTER: Exiting with HRESULT code = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED).
000113 [gle=0x80004005]
Cause:
The installer uses SAM API calls to manage the group. It always connects to the local SAM instance. The component also handles an uninstall task in the same function. On uninstall the group is being deleted.
So the SAM handle is requested with "Create Group" and "Delete" access.
The error happens because a RODC does not allow any changes and thus returns STATUS_NOT_SUPPORTED.
More information about the prevent from accidental deletion feature please refer :
http://technet.microsoft.com/en-us/library/cc773347(v=WS.10).aspx
http://technet.microsoft.com/en-us/library/cc739350(v=WS.10).aspx
Recommendation:
This is a Bug in the RODC running on server 2012, However you may do an in place upgrade to Server 2012 R2 and then proceed with the installation of the patch.
The bad news is this is fixed in 2012 R2 with a hotfix - but it isn't fixed in 2012 and it won't be because.. they've only had one official report logged. And that was by us. So, if you want this fixed, you need to start logging this with MS now.
What I can say just now is that this isn't related to the registry fixes with WinEVT we've all been trying, it's NOT limited to 2008 that has been upgraded in place to 2012 (our product support group replicated it in the lab with a brand new 2012 promoted
to RODC) and it IS only happening with RODC. Possible fix might be to make your RODC RW for a bit and install your patches then.
Background reading:
https://social.technet.microsoft.com/Forums/en-US/f77691d8-a9d0-4714-98ad-71665cfa8965/kb3000061-fails-to-install-on-server-2012?forum=winserver8gen
https://social.technet.microsoft.com/Forums/en-US/70219bcb-36a8-466e-900b-cbf390db38d2/failure-configuring-windows-updates-reverting-changes-postreboot-status-0x800f0922?forum=winserver8genThe error indicates that IIS is returning a "404 not found" error back to the Windows Update Agent. That might mean that you need to specify the correct port that WSUS is listening on, e.g.:
WSUSServer=http://yourserver:8530
Thanks,
-Michael Niehaus
Senior Product Marketing Manager, Windows Deployment
http://blogs.technet.com/mniehaus
[email protected] -
Windows Server 2012 not applying gpupdate why?
Hello, i am doing group policys on windows server 2012 with windows 7 clients and some of the gp's are not updateing on the clients i am doing gpupdate /force on them but that makes no difference can someone tell me whats wrong. here is some pics
Is the GPO applied for authentificated users? yes they are.
what does gpresult /r say?
image 1:
http://tinypic.com/r/2njy7ap/6
image 2:
http://tinypic.com/r/2qva8mc/6
some more images at random
http://tinypic.com/r/pxi6v/6
http://tinypic.com/r/1zokpk5/6
could you do a
gpresult /H whatever.htm
i did a gpupdate before heres the pic
https://dl.dropbox.com/u/87903671/screen.bmp
and then i did the gpresult heres the website
https://dl.dropbox.com/u/87903671/whatever.htm
now can someone tell me whats wrong?could you please run rsop.msc on client end and post the result
Darshana Jayathilake -
SQL Server 2012 not auto-shrinking logfile
We recently deployed SQL Server 2012 Standard on a Server 2008 R2 SP1 machine and, for the most part, everything behaves the same as SQL 2008 R2 (no surprise there). However, one issue I've been experiencing is that the transaction logs will not automatically
shrink like they do in SQL 2008 R2. The database recovery model is set to full, and we have full backups running weekly and transaction log backups running every 12 hours. The transaction log backups work fine, but the files themselves never shrink. Autoshrink
is set to true. If I manually run a shrink operation on the transaction log files, it works like a charm - it just shrank the 29GB file down to 3GB. Why does the transaction log not automatically shrink anymore?
Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Windows Server 2008 R2 SP1 (Build 7601: Service Pack 1)Hallo Daniel,
I understand the reason for the action of shrink now but I'm not agreeing to your arguments :)
But that is an issue what you may decide...
I meant RTO (recovery time objectives) because with your backup strategy you have to restore at least 10 log backups if the database will crash.
RPO may fail with the log backup period of 12 hrs in between, too!
(But all measures are part of a SLA we don't know - so maybe your business may tolerate such values)
e.g. Full Backup is on Sunday night 10:00 pm
The database crashes at Friday afternoon 5:00 pm
You have to restore the last full backup and 9 transaction log backups (2 each day from Mo - Thursday + 1 from Friday)
All data from 12:00 am to point of crash are lost!
If you would have a full backup and a daily diff backup you would decrease the numbers of restoring actions to 3 instead of 10
Restore of the full backup from Sunday
Restore of the diff backup from Friday
Restore of the log backup from Friday noon
Sorry for my OT because this has not really to do with your problems but I would take theses objectives into consideration.
We don't activate "auto shrink" for ANY productive database because we can not foresee what processes will run on the databases at any time - this is a decision the business has to make.
Uwe Ricken
MCITP Database Administrator 2005
MCITP Database Administrator 2008
MCITP Microsoft SQL Server 2008, Database Development
db Berater GmbH
http://www-db-berater.de
Maybe you are looking for
-
After downloading iOS 7 on iPhone 5 the control center won't open.
When I swipe up from the bottom, nothing happens. Both of the control center options are enabled in the settings. Help!
-
Hi Experts, How to close the open quantity in third party sales order if Purchase order is already generated from that sales order. i am unable to update the reason of rejection field in Sales order. It is giving message "Delete purchase order 830000
-
Macbook Pro very slow, won't play vids etc. Please help
Have run the etrecheck diagnostic software, results below: Problem description: Internet browsing very slow, particularly when scrolling on large pages. DVD will only play sound, video is just a black screen. Youtube would originally only play small
-
My Ipod Wont Work Somebody Help Please!!
im sry if this is in the wrong catagory well anyways im going on vacation today and i tried updating my ipod cause a while back my sister messed up my computer so i had to restore it so i restore it and i try connecting my ipod it works but when i tr
-
Numbers file on the Desktop that does not exist??
I have a newly set up MacBook Pro with Lion 10.7.2. I have created a numbers file that is NOT saved on the Desktop. I have an icon of that file on the Desktop and can select it but the file doesn't exist. I have navigated to the folder as su in Te