Windows 8 & Server 2012 not reflecting in updates category in SCCM 2012 SP1 console

Hi,
We are using SCCM SP1 with CU4 on server 2012. I am not able to see the windows 8 and server 2012 in the updates category for patch management.
Any Idea?

They should appear after the first successful sync.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

  • Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    Windows 7 will not let me update the driver for my iphone 4s so I can see it in iTunes. Any suggestions?

    You turned off all firewall and antivirus ? You could try downloading the update via a browser - what device are your trying to download the update for ? If it's an iPhone 4 :
    GSM / sim card model
    CDMA model
    Then in iTunes press and hold the shift key on Windows when clicking the Check For Updates button which should let you navigate to the downloaded file

  • How to find who modified Software Update deployment in sccm 2012

    Hi,
    How to find who modified(Date & Time) software update deployment in SCCM 2012 ?

    In the Console :
    Monitoring / System Status / Status Message Query
    Right Click : "Deployments Created, Modified, or Deleted" - Show Message and select your period.
    You'll have your information there.
    Benoit Lecours | Blog: System Center Dudes

  • Windows 8.1 system with new Office 2013 install not pulling down any Office 2013 updates from my SCCM 2012 SP1 server

    Hi,
    I've just setup a new Windows 8.1 system and added to my SCCM 2012 SP1 server and all is good and it pulled down all the correct Windows updates and pulls down automatically the FEP updates that are distributed from SCCM 2012 daily. 
    I just installed Office 2013 on this system and have activated it as necessary.  The problem is that the system doesn't seem to be pulling down any of the Office 2013 updates that have distributed thru SCCM.  I have other systems with
    Office 2013 installed and they have pulled down Office 2013 updates in the past when I published them.
    If I look at the Office 2013 updates in the SCCM console software section, I can see that for example it shows that Office 2013 SP1 (x86) is needed by one system and installed on 8 other systems and shows as downloaded and deployed.
    I've restarted the new system multiple times and also tried to force a software update check from the Configuration Manager applet but nothing seems to happen.
    What can I check to try and determine what the problem is?
    Thanks in advance,
    Nick

    Yes, the 8.1 system is a member of collection where the update deployment is targeted.
    Are there any specific logs I should check in the client?  If I check the WindowsUpdate.log I can see messages about the machine pulling down the FEP updates but that's all it appears to be doing.
    in CCM\logs, focus on the updatehandler and updatedeployment, to begin with
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Windows Updates are not getting download after installation of SCCM 2012 SP1

    I have installed SCCM 2012 SP1 step by step as per microsoft documents, Now I am getting error while downloading windows updates from microsoft site.
    Error by WCM.log : System.Net.WebException: The underlying connection was closed: An unexpected error occurred on a send. ---> System.IO.IOException: Unable to read data from the transport
    connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
    Error By wsyncmgr: DB Server not detected for SUP XYZ.com from SCF File. skipping.
    Sync failed: WSUS update source not found on site KSL. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=KSL-MUM-SCCM01.KSEC.KotakGroup.com SITE=KSL PID=3688 TID=4752 GMTDATE=Tue May 21 10:59:06.745 2013 ISTR0="getSiteUpdateSource" ISTR1="WSUS
    update source not found on site KSL. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    I have reinstall my SUP on site server, i have my WSUS & site server is on same server. I have kept my sup setting as per requirment (8530 & 8531)
    Kindly suggest is any other settings need to be done on server side.

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    From your log snip-it, it looks like the firewall is causing your problem. Temporary turn off the firewall and see if that solves your problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • WSP deployment to multyiple fronend server in sharepoint 2013 not reflecting the updated solution

    Hi I have created a wsp package and deployed it to the multiple  front end server. It was working fine on initial deployment. However after doing some change in JS file, I update the solution (through PowerShell update solution command)  and found
    it's not reflecting in Browser . Even if i have checked the file in both front end are updated (in 15 hive).
    Thanks and Regards
    Er.Pradipta Nayak
    Visit my Blog
    Xchanging

    If the files are updating on the front end servers, but not showing changes in the browser then the problem is that the .JS files have been cached by the browser.  You need to clear the Browser cache after this kind of change before the change will
    be reflected in the browser.  You can manually clear the browser cache in IE using the developer toolbar [F12].
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • I can not update a Windows Server 2008 R2 with Software Update Group in SCCM2012

    Hi all,
    I got some problems with update deployments these days.
    I try to configure SCCM2012 to update 1 Windows Server 2008 R2 (with Hyper-V / This server is in a cluster)
    Actually i've 4 other Hyper-V servers and i would like to add one more in the cluster called Hyper-V5. To do that i need that all Hyper-V servers use the same Windows Updates.
    I created a collection for my Hyper-V servers and then a Software Update Group with all needed updates (checked the list of another HV-Server).
    I did a deployment on this collection using this new Software Update Group.
    I checked the Sofwtare Center's logs on the Hyper-V5 server and i saw that synchronization has a successfull state.
    But there is no updates installed or displayed in Sofwtare Center.
    Here is some screenshots : Oh no i can't post image because ... "Body text cannot contain images or links until we are able to verify your account." waiting to be verified since months.
    Thanks for your help.

    Hi,
    Have you try to run Software Updates Scan Cycle and Software Updates Deployment Evaluation Cycle Actions on the client? Please check ScanAgent.log and PolicyAgent.log to see whether the client received the updates deployment policy.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Windows server 2008 R2 won't update

    I have a Windows Server 2008 R2 which won't install updates coming from a WSUS server.  All other servers are installing updates fine.  They fail with the code 52D.  If i look at the Application Event log i can see the install start but then
    each update fails with the following events and IDs:
    Event ID: 11325
    Product: Microsoft Office professional Plus 2010 -- Error 1325. 'administrator' is not a valid short file name
    Event ID 1024
    Product: Microsoft Office Professional Plus 2010 - Update 'Update for Microsoft InfoPath 2010 (KB2817369) 32-Bit Edition' could not be installed. Error code 1603. Windows Installer can create logs to help troubleshoot issues with installing software
    packages. Use the following link for instructions on turning on logging support: http://go.microsoft.com/fwlink/?LinkId=23127
    Both events have the source as MsiInstaller
    Also i have an update for Adobe Reader which is an .msp file which also won't install and gives the error message:
    Error 1325.administrator is not a valid short name file.
    I have a feeling this has something to do with Windows Installer but i'm unsure how to fix it.
    Please help
    Thanks

    Hi,
    2014-05-14   
    14:30:03:921 5336   16a8  
    Handler         MSP Error List:
    2014-05-14   
    14:30:03:921 5336   16a8  
    Handler         1: 1325 2: administrator
    2014-05-14   
    14:30:03:921 5336   16a8  
    Handler          
    : MSI transaction completed. MSI: 0x80070643, Handler: 0x8024200b, Source: No, Reboot: 0
    2014-05-14   
    14:30:03:921 5336   16a8  
    Handler          
    : WARNING: First failure for update {5D5C9291-182E-48CD-B1CB-B245E9BB5B0B}, transaction error = 0x8024200b, MSI result = 0x80070643, MSI action = CostFinalize
    2014-05-14   
    14:30:03:922 1148   1878  
    AU      >>## 
    RESUMED  ## AU: Installing update [UpdateId = {8AF4924E-500A-4AFF-B4DB-C64E9F0C7102}]
    2014-05-14   
    14:30:03:922 1148   1878  
    AU        # WARNING: Install failed, error = 0x80070643 / 0x0000052D
    2014-05-14   
    14:30:03:922 5336   16a8  
    Handler          
    : WARNING: Operation failed at update 0, Exit code = 0x8024200B
    The log is filled with such kind of errors. And based on these message, I found some valuable information that worth a try.
    What causes error 0x80070643 / 0x0000052D ?
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/4f64bcbe-54dc-4e66-a83c-dfc2cdc0fb7e/what-causes-error-0x80070643-0x0000052d-
    Error 0x80070643 with Office 2010 Patches KB2553065 KB2584066 KB2553091
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/df31233e-fdd8-4c2f-b0db-6767cd4a0822/error-0x80070643-with-office-2010-patches-kb2553065-kb2584066-kb2553091?forum=winserverwsus
    The two thread discussed the same error with solution in it. And the following article applied up to office 2007. But the article reviewed at September 12, 2011. Not 100 percent
    sure if it applied, but you can have a try.
    If you disable the Ose.exe file, Microsoft Office updates do not install when you use Microsoft Windows Server Update Services or the Microsoft Update Web site to deploy software
    updates and hotfixes to computers in the organization
    http://support.microsoft.com/kb/903774
    Hope this helps.

  • Change in Quota at Exchange Server does not reflect in Outlook

    I have changed the quota for a database on the exchange server from the default 2 GB to Unlimited and even restarted the information store service. The user is able to receive emails and send them as well. However in Outlook the message still persists that
    users quota is 2 GB. Have restarted Outlook several times. Can anyone shed some light why this may be happenning. Also what is the default interval in which the information displayed by Outlok changes after a change at the exchange server?
    Ron
    Ron

    Hi RonMen,
    The change of mailbox quota will not reflect in outlook immediately,  the update occur every 30 minutes by default.
    Updates can be triggered either manually by the user or automatically.
    The following user actions will request the server to update the properties :
    1. Emptying Deleted Items
    2. Emptying a Folder (via the button in the ribbon’s folder tab or right-click on folder)
    3. Permanently deleting (shift-delete) an item
    4. Closing the Archive / AutoArchive dialogs
    There is a more detailed article for your reference:
    Mailbox Quota in Outlook 2010 - general information and troubleshooting tips
    http://blogs.technet.com/b/outlooking/archive/2013/09/19/mailbox-quota-in-outlook-2010-general-information-and-troubleshooting-tips.aspx
    If you have any further questions, please let me know.
    Best regards,
    Eric

  • Tree table is not reflecting the updated model data changes at the front end

    I have two tables ,
    1) Provider table(tree table)  2)member table
    I have implemented drag and drop functionality using jQuery UI on both tables.
    In my scenario when I drag a member from the member table and drop it on the Provider table and also when I delete an assigned member from the provider table I will update the data fetched from odata model and again I will call the method which binds the data to the provider table so that the table will reflect the changes.
    here is the code,
    on drop:
    $("#Provider tbody tr").droppable({
      drop: function(event){
           oController.AssignMember(oProviderId, oMemberId)
      }).disableSelection();
    Assign member function:   here am updating the model.
    AssignMember : function(oProviderId, oMemberId){
      var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
      var oParameters = {};
      oParameters.PROVIDER_ID = oProviderId;
      oParameters.MEMBER_ID = oMemberId;
      oParameters.CREATED_ON = new Date();
      oModel.setHeaders({"content-type" : "application/json;charset=utf-8"});
      oModel.create( "/PROVIDERMEMBERS", oParameters, null, function() {
      var oController = sap.ui.controller("adsm.provider.member_assignment_view");
      oController.GetProviderData();
      },function(jqXHR) {
      var errorMessage = jqXHR.response.body;
      var jsondata = JSON.parse(errorMessage);
      sap.ui.commons.MessageBox.alert(jsondata.error.message.value);
    GetProviderData function: here i bind the data to the table
    GetProviderData: function(){
    var oModel = new sap.ui.model.odata.ODataModel("../../../services/provider.xsodata/", true);
    var Context = "/PROVIDERS?expand=ASSIGNEDMEMBERS&$select=NAME,ID,ASSIGNEDMEMBERS/NAME,ASSIGNEDMEMBERS/ID,ASSIGNEDMEMBERS/PROVIDER_ID";
      var oTable = sap.ui.getCore().byId("tblProviders");
      oModel.read(Context, null, null, true, onSuccess, onError);
      function onSuccess(oEventdata){
      var outputJson = {};
      var p = 0;
      var r = {};
      if (oEventdata) {
      r = oEventdata;
      try {
      if (oEventdata.d){
      r = oEventdata.d;
      } catch(e){
      //alert('oEventdata.d failed');
      try {
      if (oEventdata.d.results){
      r = oEventdata.d.results;
      } catch(e){
      //alert('oEventdata.d.results failed');
      try {
      if (oEventdata.results){
      r = oEventdata.results;
      } catch(e){
      //alert('oEventdata.results failed');
      $.each(r, function(i, j) {
      outputJson[p] = {};
      outputJson[p]["NAME"] = j.NAME;
      outputJson[p]["ID"] = j.ID;
      outputJson[p]["PROVIDER_ID"] = j.ID;
      outputJson[p]["DELETE"] = 0;
      var m = 0;
      if (j.ASSIGNEDMEMBERS.results.length > 0) {
      $.each(j.ASSIGNEDMEMBERS.results, function(a,b) {
      outputJson[p][m] = { NAME: b.NAME,
      ID : b.ID,
      PROVIDER_ID: b.PROVIDER_ID,
      DELETE: 1};
      m++;
      p++;
    var oModel = new sap.ui.model.json.JSONModel();
      oModel.setData(outputJson);
      oTable.setModel(oModel);
      function onError(oEvent){
      console.log("Error on Provider Members");
    oTable.bindRows({
      path:"/"
    Its working fine in chrome but in IE the model data gets updated but the table is not reflecting the changes at front end.Can anyone suggest me a possible solution to fix this?
    Please have a look at the attached screen shots.
    Best regards,
    Amala Suganya.

    Hi Amala,
    I think this will help you:
    Disabling Cache for CRUD/FI OData scenarios for a UI5 Application on Internet Explorer
    Kind regards,
    RW

  • Server will not boot after update !! Help needed fast !!

    I have a new (Aug 2005) XServe G5, running 4.3.
    Active Directory integrated, stores home folders (AFP), manages preferences and 5 print queues for 55 Mac OS X.4.3 clients and 200 users.
    It downloaded the 4.4 update, unchecked the OS 4.4 update (I think was my first mistake), restarted. Now, at boot up, about the moment the apple would appear (maybe it appears for a split second) all I get is the ugly not sign.
    -- Am able to boot to external firewire drive
    -- Drive shows as boot option
    -- Disk repair reported no problems to fix
    -- Can not find any log entries after last shut down. No service ever starts for any entries to be made.
    -- Applied the 4.4 update successfully while booted from external fw drive, no effect. Startup disk reports system to be OS X Server 4.4 and lists as a boot option.
    -- Drive behaves same when transferred to my G5 tower: big not sign.
    What other steps can I do to troubleshoot this boot problem? If I don't get this server up this weekend, I'll get roasted by an angry mob.
    Any suggestions are welcomed and greatly appreciated.

    Eeh...
    Always clone the existing system prior to updating it. Do so when the server is not in use, shut off services where possible (you want it to be as quiescent as possible).
    Mike Bombich (at Apple) describes how you can do this via the command-line, which I prefer for this purpose (you can stagger the process):
    http://www.bombich.com/mactips/image.html
    Now then:
    Have you booted from the install CD and used Disk Utility to run Repair Permissions ? That should be your first step.
    It may change nothing, but can you boot into Safe mode ? Hold down the Shift key at powerup and keep holding it until you see: "Safe boot"
    If you CAN get it booted in that state, then run the 10.4.4 COMBO updater
    you need to run the combo updater at this point. After doing so, use Disk Utility to run repair permissions on the boot drive itself, and then reboot.
    Otherwise, start it in Target Disk Mode as you did before, connect it to a unit running 10.4.4, and run the /combo/ 10.4.4 Server updator (NOT client, of course) onto the server's mounted hard drive.
    I'm not sure you can do this while running 10.4.x client. You may need to do a quick install of 10.4 server (say onto a Firewire drive), boot your spare Mac from it, and -then- mount the server via Firewire target mode, and apply the 10.4.4 server combo updater.
    Good luck !

  • Applet works in Windows Server and not in Unix server

    My friends,
    I have a signed applet working fine in a windows server and a client with win98. When a put this applet in a AIX/Unix server in same win98 client did not work.
    The applet call a program in the client by Runtime.exec and a give "error=0".
    Someone can help me ?

    Show the code with the runtimeexec line.
    Windows file system is different than UNix.
    Windows eg. Runtime.exec (c:/fileToRun.exe)
    *ix eg.          Runtime.exec (fileToRun)                                                                                                                                                                                                                                                                                                                                                       

  • Installing 10g R2 on 32-bit Windows Server 2008 (not R2!)

    I want to install 10g R2 on Windows Server 2008 32-bit OS.
    It looks like 10.2.0.4 is the current release that supports Server 2008, however it doesn't seem to be available as an installation option.
    The download page says to download 10.2.0.3 and then use the patchset 10.2.0.4 from Oracle MySupport.
    Doesn't the patchset have to be installed over a current installation? How do I get an installation on my OS, if 10.2.0.3 will not install on it? Or will it?

    CKPT wrote:
    I want to install 10g R2 on Windows Server 2008 32-bit OS.
    It looks like 10.2.0.4 is the current release that supports Server 2008, however it doesn't seem to be available as an installation option.
    The download page says to download 10.2.0.3 and then use the patchset 10.2.0.4 from Oracle MySupport.
    Doesn't the patchset have to be installed over a current installation? How do I get an installation on my OS, if 10.2.0.3 will not install on it? Or will it?What is your current BASE patchset? You can upgrade from 10.2.0.1 to 10.2.0.4 directly.BASE patchset? Not sure what you mean. This is a new install.
    Are you implying that install 10.2.0.1 first is the way t go. Not sure if that will install on Server 2008.
    I can't fiddle with the product prereqs xml to make it install. We will be instructing the customer on the installation and they will not want to do that.

  • Marketing Workflow (running on Windows Server) can not read files on Linux

    We are currently facing an issue in fetching the WSD responses stored in XML format and importing it into Siebel DB. These XML files are created in Siebel Linux servers(Temp folder) where EAI Object manager is running. But Marketing workflows (Mktg Master import workflow) is running on Windows server ( where marketing file system installed). Mktg Master import workflows are not able to read XMLs stored in Linux servers.
    When we monitor the workflow we see an error:
    “Error invoking service 'Mktg File Manager', method 'ProcessFile' at step 'File Processing'.(SBL-BPR-00162) --Error getting XML from file '/siebel/gtwysrvr/fs/temp/1-158U3XB121038.xml'.” (SBL-EAI-04261)
    How do I overcome this? What is best practice?

    Moderator Action:
    Same post is multi-posted to the Siebel sub-forum:
    Error in fetching WSD responses stored in XML format and importing it
    This off-topic post is now locked and likely will be removed.

  • Windows Server 2012R2 fails to get update from WSUS with error code 80072ee6

    Hi all,
    I've deployed WSUS role on a Windows Server 2012R2 machine. WSUS listen on port 8530. Now I'm trying a test server (this machine runs WIndows Server 2012R2 too). I've configured a GPO but when I try to check for updates I get the errore in the subject.
    I've checked windowsupdate.log and theese are the settings of the client:
    AIR Mode is disabled
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Policy Driven Provider:  http://MyWSUS.MyDomain.local:8530
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Detection frequency: 22
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Target group: CSM Servers
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Approval type: Pre-install notify (Policy)
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Auto-install minor updates: No (User preference)
    2014-02-05 12:59:00:357
    776 fe0
    AU  # Will interact with non-admins (Non-admins are elevated (User preference))
    I confirm that from the test server I can telnet to my wsus server on TCP port 8530

    Hi,
    This issue occurs if the URL under the Group Policy setting 'Specify intranet Microsoft update service location' is invalid.
    You receive a "80072EE6" error code when you download an update from Windows Server Update Services in Windows 7-based or Windows Server 2008 R2-based
    computer
    http://support.microsoft.com/kb/2724184
    Make sure that the URL is correct and the name can be resolved.
    Hope this helps.

Maybe you are looking for