Server command window disappears after running

Hi,
I have been having major problems with BEA weblogic. I'm just trying to run samples
from their book and I got things to work using version 6.1 which I downloaded
from the site but when it came to Entity Beans, the sample wouldn't work. So I
installed the 6.0 version from the CD and now the server itself doesn't run. When
I Start the Server from the Start Menu, the command window pops up and then just
disappears (at least for teh examples Server). The Default Server opens a command
window, asks for my password (which it prints to the screen by the way...it's
not supposed to do that) and then disappears. I don't know what to do!!
Any suggestions is really truly absolutely appreciated!!
Cindy

Hi,
See where that shortcut points and go to that directory to execute that start
script from command prompt, then you can see the exact exception it will be
throwing....
may be wrong start-up password i guess...
regards
aseem
Cindy wrote:
Hi,
I have been having major problems with BEA weblogic. I'm just trying to run samples
from their book and I got things to work using version 6.1 which I downloaded
from the site but when it came to Entity Beans, the sample wouldn't work. So I
installed the 6.0 version from the CD and now the server itself doesn't run. When
I Start the Server from the Start Menu, the command window pops up and then just
disappears (at least for teh examples Server). The Default Server opens a command
window, asks for my password (which it prints to the screen by the way...it's
not supposed to do that) and then disappears. I don't know what to do!!
Any suggestions is really truly absolutely appreciated!!
Cindy

Similar Messages

Emails in Reminder window disappears after sometime

Hi Team, I am using Outlook 2013 pro plus with office 365 Email Service. My query is
I flag emails as Flag and reminder to it. After perfect time time set as reminder the reminder window pops up correctly. I have multiple reminder set. so the reminder window has many emails with due dates and i dont dismiss them.
After some point of time Many of the emails from the reminder windows disappears.
I dont know the cause of it. does reminder window in outlook is sync with calender settings?
Is there any defualt time in the registry that causes my reminder window emails to disappear? i think emails which are there in reminder should be there intact until and unless i dismiss them.
Troubleshooting Which i had tried is
Creating a new profile
Repaired the office
Ran outlook in safe mode
Ran the switch /resettodobar /ClearReminders
Set all COM Addins to disabled
Disable Hardware Acceleration

Hi
As per the information and details provided by you, to solve this problem, please follow these steps: -
If your reminder is not working properly, I would suggest proceeding in the following order: -
First, check if the
Reminders are enabled, and make sure the check-box in the
Calendar section that is labeled “Default Reminders” is
checked.
In that same section, the Reminder time should be set to something reasonable, like 15 minutes.
If that does not fix it, then exit Outlook and restart it from the command line with the
“Outlook/cleanreminders” command.
Use Cleanreminders Switch
The easiest way to try to get rid of corrupt reminders is by closing Outlook and reopening it using the
/cleanreminders switch. To do this, press Windows key + R to open the
Run dialog. Type Outlook /cleanreminders in the field and press
OK.
Make sure you have a space between
Outlook and slash. Using Outlook.exe is optional just the program name should work.
A very few people will need to use the full path to Outlook.exe. Click
Browse and look under C:\Program Files\Microsoft Office\ (C:\Program Files (x86)\Microsoft Office\ if using 64-bit Windows).
I hope this information will be helpful for you.
Thanks and regards
Ashish@V

Window disappears after second selection

Hi,
I have an OO alv grid that calls a second window. On double-clicking on a value, the value drops into the first window - this works fine. My problem is that the window only closes on a second double-click (even though I can see that my value has dropped into the first window).
After the first selection it comes back into the PBO again, though I have no idea why.
Is there something I'm not setting to stop thsi happening ?
thanks.

Well, if you can copy and rename the executable and get it working, then it's a pretty clear indication that the origianl is under some kind of lock/ security supervision from some tool or the system itself. Have you checked the options for user permissions and execution prevention? Have you looked into the logs and blacklists of your firewall and virus scanner?
Mylenium

Thunderbird window disappears after GNOME Shell restart

When restart GNOME Shell with Alt f2+r, thunderbird window disappears and leaves a process you cannot kill.

You are using a theme which does'nt support gnome 3.10 yet.
Try using the default Adwaita theme.
Looks like you are using Zukitwo, try this Zukitwo beta theme for 3.10

Directory Server Admin Console "disappears" after logging in

Hi,
We are just starting to work with Directory Server 6.1, on RedHat 4. I access the server on which Directory Server is running via X. However, when I try to access the Admin Console and after logging in, the main Admin Console panel appears very briefly, and then everything, including the xterm window that I started with, disappears.
I've tried restarting both the slapd (slapd-xxx) and admin console (start-admin), but the same thing keeps happening.
This is the first time that I'm working with 6.1, but do I need to login/start the Admin Console a different way than before when using X?
Thanks,
Jim

Hi,
No one has responded to this thread, but for the record, one of my colleagues got it working today, and I hope that this info might help someone else someday...
I had neglected (sorry) to mention that we're in an environment where we can't run directly as root, but instead have to use sudo.
What I was doing earlier was ssh'ing to the server, then doing a "sudo bash", doing the "export DISPLAY=...", then running the startconsole to startup the Sun DS console.
So, today, I was fooling around with this with one of the other guys, and instead of doing the "sudo bash", he just did the "export DISPLAY=...", and then just "sudo ./startconsole", and, voila, we got the console GUI and were able to login without it disappearing.
I had not tried that previously, because I had thought that the "export DISPLAY=..." wouldn't have survived the sudo (I'm not that familiar with it), but I guess it does.
I'm not 100% sure what the problem was with doing the "sudo bash", but I believe it had something to do with "who we were logged-in as".
Maybe someone here who's more familiar with sudo, etc. and Cygwin X might be able to provide an explanation.
Jim

Premiere Elements 9 window disappears after loading project

Hello all,
I've been having issues with Premiere Elements (9) lately. I have read other threads similar to my problem and followed some of the instructions (deleting the Pref file, for example).
Whenever I open a specific project (that has worked before until recently), the loading progess bar goes from 0-100 and then it stays there. After that, the entire program disappears. It doesn't crash (as it's still in the task bar), but when I click on PrE9, nothing comes up. When I mouse-over the icon on the task bar, it's just the window buttons (minimize, expand, exit).
The reason I started this thread is because none of the problems I found were really similar to mine.
Any help would be much appreciated.
(Also, please pardon me if this thread is in the wrong place.)
Thanks!

Unitedmoviemaker
Have you looked at any possible involvement of the antivirus program in the way of recent updates for it? Recent Windows Updates? Can we assumed that you have not added, subtracted any programs that would coincide with the onset of the issue?
Have you checked to make sure that your video card is up to date according to the web site of the manufacturer of the video card?
Recently, with Premiere Elements 10 and NVIDIA video card, answers have come from rolling back the driver.
I guess you tried the Adobe Premiere Elements Prefs file deletion. But, did you try deleting the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists?
Do you have the Premiere Elements 9 installation disc for installations files in case a deactivation, uninstall, run through of ccleaner, reinstall is indicated?
But, let me backup for a moment. Is this issue confined to one previously created project or to all your Premiere Elements projects either new or old?
Let us start here and then move forward according to your answers.
Thanks.
ATR
Add On...Usual...confirm that you have the latest version of QuickTime installed, you are running the program as the 9.0.1 Update, and you are running the program Run As Administrator or from a User Account with Administrative Privileges.

Apple app windows disappear after coming out of sleep

In Yosemite, after coming out of sleep, some Apple apps are still active but the windows have disappeared. I have noticed this with the Activity Monitor and with the Calculator. I played around with Hide/Show Windows, etc and was finally able to make the Activity Monitor window show up. I was unable to get the window to show up in the Calculator. Killing and restarting the app resolved the issue.
I have not had any problems with non-Apple apps, and Finder and Safari seem to be OK.

Further correction: Even when initially launched, after a restart Activity Monitor and Settings will both launch with no windows. There is a window name shown when right clicking on the icon in the Dock and in the application menu, but clicking on the window does not bring it up for display. With no Activity Monitor, you have to use command line, ps command and kill to clear the processes, following which they can be relaunched with all windows displayed.

SWT window disappear while running Runtime.getRuntime().exec()

Hello,
I have create a SWT application. I am executing the folloiwng code from my SWT application.
Process process = Runtime.getRuntime().exec(param);
BufferedReader in = new BufferedReader(new InputStreamReader(process.getInputStream()));
String line = null;
while ((line = in.readLine()) != null) {
During execution of the above code when click on other icon of the window task bar and click back on SWT window Icon, The windows open but it does not show annything until the code execution finish. any help would be apprecited.

This isn't an SWT forum. In the future, please post such questions on a forum specifically for SWT issues.
But to answer your question, there's a 99.9% chance this is because you're launching the process on SWT's UI thread. Similar to performing long-running tasks on Swing's EDT, this is a no-no. The SWT UI won't be able to repaint itself until after your process has finished. To remedy this, launch your process in a separate Thread.

OTBI - Prompt value disappears after running report

Hello All,
Fairly new to the cloud work-space with its reporting tools.
When we try to run the report, the prompts are visible for the first time the report. Upon selecting the values, and running report, the prompts disappear. I tried setting the prompts on the side of the page as well as top of page. Both times, the prompts disappears.
Any thoughts?
Many thanks!

Hi,
We need to add a tag in the instanceconfig.xml file to achieve this.
Stop the services and place the below given tag in instanceconfig.xml
<PersistPageState>FALSE</PersistPageState>
The tag can be placed anywhere between the server instance tags in instanceconfig.xml.
Restart the services and login into the application and check by setting some values in the prompts.
Hope this helps.
Thanks,
Balaa...

Files disappeared after running disk utility disk repair but still space still remains. how do i recover the files?

stupidly repaired my external hard disk without backing it up via mavericks's disk utility repair option.
After the repair, all my folders disappeared but at the same time I noticed that the disk space still remained the same. Is there anyway to get these files back? My thesis is on it.

General File Recovery
If you stop using the drive it's possible to recover deleted files that have not been overwritten by using recovery software such as MAC Data Recovery, Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive. Two free alternatives are Disk Drill and TestDisk. Look for them and demos at MacUpdate or CNET Downloads. Recovery software usually provide trial versions that enable you to determine if the software would help before actually paying for it. Beyond this or if the drive has completely failed, then you would need to send the drive to a recovery service which is very expensive.
The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
Also visit The XLab FAQs and read the FAQ on Data Recovery.

[Solved] Wallpapers disappear after running nemo

Hi All,
I did search for my issue in the forums but found nothing (maybe the keyword "wallpaper" I used is too broad). I'm using gnome 3.10 and nemo 2.0.0. I create a file like adwaita-timed.xml to display the wallpapers:
<background>
<starttime>
<year>2011</year>
<month>11</month>
<day>24</day>
<hour>7</hour>
<minute>00</minute>
<second>00</second>
</starttime>
<transition type="overlay">
<duration>3456</duration>
<from>/home/ly/wallpapers/7.jpg</from>
<to>/home/ly/wallpapers/23.jpg</to>
</transition>
It works fine until I run nemo. Then the wallpaper is black and it's still black even after I close nemo. Does anybody know what's wrong with my machine?
Regards.
Edit: Thanks, Darkcloud.
Last edited by dxxvi (2013-10-23 11:38:38)

You need to disable the desktop icons feature in Nemo: https://wiki.archlinux.org/index.php/Nemo#Configuration
Last edited by Darkcloud (2013-10-23 08:09:57)

Siebel Tools 7.8: Watch window disappeared after undocking

Hi everyone,
during a debugging session in Siebel Tools 7.8 I right clicked on the Watch window and deselected "Docked". Since this time the Watch windows has disappeared forever. I can activate and deactivate it, but have never seen the window again and I really need it for debugging scripts... Restarting Tools didn't help either.
Does anyone know what happened here? How can I get the Watch window back?
Sebastian

Please check this SR on support web.
SR 38-3224965921:
Resolution:
The customer renamed the old Tools preferences file (devtools.prf) from the SIEBEL_TOOLS_ROOT\BIN directory to devtools.prf.old and the file was recreated by Siebel Tools when it restarted. The windows returned to their original settings.
Also refer to Using Siebel Tools > Customizing Your Siebel Tools Environment > About Development Tools Options, for further information on the devtools.prf file.

Adobe window disappears after input

Hi
I am using Adobe form, webservices with Javascript.
I am using simple javascript like xfa.host.messageBox and looping on response objects. I have 2 buttons on Adobe form with many input fields/dropdowns & Listboxes.
The form first displayed one input field and a Search button, after input isprovided and click on Button, it normally shows 2 xfa.host.messageBox
messages and then fetches the response from webserivce and displays the rest of the form.
The issue is that when click on the button and move open another IE/other application window, later when I want to see the result in form, the window doesnt appear.
When I open the Task Manager, the form is there, so I select the Form and click on "Switch to" to open the form and work further. My user will not want to have such a scenario.
Please advice as what can be done.
Thanks for your advice in advance.
Karthika

I do not understand what you are describing ...can you describe it again and add images or screen shots of what you are seeing to help clarify?
Paul

Video and Picture windows disappear after upload

Posting again with the hope someone out there can help. I
cannot make sense of this problem.
Hi,
A couple of pages I uploaded to the Internet contain both a
scrolling picture viewer and a Flash video player window (with
video). Both worked during the design in Dreamweaver... in preview
(both IExplorer and FIrefox). However, after upload, neither window
appears on the site... not even the spacing is allotted for those
windows. What happened? Why aren't the viewer windows appearing as
they do in preview? Here's the code as it appeared in DW. Thank
you.
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="293" height="273">
<param name="flash_component" value="ImageViewer.swc"
/>
<param name="movie" value="Home Viewer.swf" />
<param name="quality" value="high" />
<param name="FlashVars"
value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',showC ontrols:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSize:1 0,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['hands6.jpg','ma nwheelchair.jpg','motherdaughter.jpg'],slideLoop:true,frameThickness:2,imageLinks:['hands6 .jpg','manwheelchair.jpg','motherdaughter.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCa ptions:[]}"
/>
<embed src="Home Viewer.swf" quality="high"
flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',s howControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSi ze:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['hands6.jpg' ,'manwheelchair.jpg','motherdaughter.jpg'],slideLoop:true,frameThickness:2,imageLinks:['ha nds6.jpg','manwheelchair.jpg','motherdaughter.jpg'],frameColor:#333333,bgColor:#FFFFFF,ima geCaptions:[]}"
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="293" height="273">
</embed>
</object>
Attach Code
<object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0"
width="293" height="273">
<param name="flash_component" value="ImageViewer.swc"
/>
<param name="movie" value="Home Viewer.swf" />
<param name="quality" value="high" />
<param name="FlashVars"
value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',showC ontrols:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSize:1 0,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['hands6.jpg','ma nwheelchair.jpg','motherdaughter.jpg'],slideLoop:true,frameThickness:2,imageLinks:['hands6 .jpg','manwheelchair.jpg','motherdaughter.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCa ptions:[]}"
/>
<embed src="Home Viewer.swf" quality="high"
flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',s howControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSi ze:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['hands6.jpg' ,'manwheelchair.jpg','motherdaughter.jpg'],slideLoop:true,frameThickness:2,imageLinks:['ha nds6.jpg','manwheelchair.jpg','motherdaughter.jpg'],frameColor:#333333,bgColor:#FFFFFF,ima geCaptions:[]}"
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="293" height="273">
</embed>
</object>

Post a link to the page please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"BDStroh" <[email protected]> wrote in
message
news:[email protected]...
> Posting again with the hope someone out there can help.
I cannot make
> sense of
> this problem.
> Hi,
> A couple of pages I uploaded to the Internet contain
both a scrolling
> picture
> viewer and a Flash video player window (with video).
Both worked during
> the
> design in Dreamweaver... in preview (both IExplorer and
FIrefox). However,
> after upload, neither window appears on the site... not
even the spacing
> is
> allotted for those windows. What happened? Why aren't
the viewer windows
> appearing as they do in preview? Here's the code as it
appeared in DW.
> Thank
> you.
>
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=9,0,28,0" width="293" height="273">
> <param name="flash_component" value="ImageViewer.swc"
/>
> <param name="movie" value="Home Viewer.swf" />
> <param name="quality" value="high" />
> <param name="FlashVars"
>
value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verda
>
na',showControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:
>
#333333,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:tru
>
e,imageURLs:['hands6.jpg','manwheelchair.jpg','motherdaughter.jpg'],slideLoop:tr
>
ue,frameThickness:2,imageLinks:['hands6.jpg','manwheelchair.jpg','motherdaughter
>
.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}" />
> <embed src="Home Viewer.swf" quality="high"
>
flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'V
>
erdana',showControls:false,frameShow:false,slideDelay:5,captionSize:10,captionCo
>
lor:#333333,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay
>
:true,imageURLs:['hands6.jpg','manwheelchair.jpg','motherdaughter.jpg'],slideLoo
>
p:true,frameThickness:2,imageLinks:['hands6.jpg','manwheelchair.jpg','motherdaug
>
hter.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}"
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> n=ShockwaveFlash" type="application/x-shockwave-flash"
width="293"
> height="273"> </embed>
> </object>
>
> Attach Code
>
> <object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=9,0,28,0" width="293" height="273">
> <param name="flash_component" value="ImageViewer.swc"
/>
> <param name="movie" value="Home Viewer.swf" />
> <param name="quality" value="high" />
> <param name="FlashVars"
>
value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verda
>
na',showControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:
>
#333333,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:tru
>
e,imageURLs:['hands6.jpg','manwheelchair.jpg','motherdaughter.jpg'],slideLoop:tr
>
ue,frameThickness:2,imageLinks:['hands6.jpg','manwheelchair.jpg','motherdaughter
>
.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}" />
> <embed src="Home Viewer.swf" quality="high"
>
flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'V
>
erdana',showControls:false,frameShow:false,slideDelay:5,captionSize:10,captionCo
>
lor:#333333,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay
>
:true,imageURLs:['hands6.jpg','manwheelchair.jpg','motherdaughter.jpg'],slideLoo
>
p:true,frameThickness:2,imageLinks:['hands6.jpg','manwheelchair.jpg','motherdaug
>
hter.jpg'],frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}"
> pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Versio
> n=ShockwaveFlash" type="application/x-shockwave-flash"
width="293"
> height="273"> </embed>
> </object>
>
>
>

App updates don't disappear after running in OS7

App updates appear in App Store. I push 'update' and they update. But then the icon sits in the app updates section of my account. They won't go away. This has only started to happen after I updated to OS 7. Bug?

Feature.
Welcome to the weird, wacky, wonky world of iOS 7.

Server command window disappears after running

Similar Messages

Maybe you are looking for