Server host multiple containers

Can Server host multiple containers?

It's possible to run multiple Ejb containers in one J2EE Server.
I don't know what's BEA's opinion in Weblogic environment but
in WebSphere (and couple of free Ejb servers) it's possible.
Search words "Administrating EJB container" etc. from
www.google.com and you will (I thing) find an article(s).
Br
Zick
PS. Check a comp.lang.java.bean discussion from this url:
http://groups.google.com/groups?q=multiple+container+group:comp.lang.java.beans&hl=fi&ie=ISO-8859-1&oe=ISO-8859-1&selm=8DA37762Ebausibmcom%40newshost.transarc.com&rnum=4
Rob Woollen <[email protected]> wrote:
>
>
What do you mean exactly? i.e. what are you trying to achieve with
multiple containers within a single app server?
-- Rob
"uma s. patil" wrote:
Can Server host multiple containers?--
AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
by Michael Girdley, Rob Woollen, and Sandra Emerson
http://learnWebLogic.com
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
What do you mean exactly? i.e. what are you trying to achieve with
multiple containers within a single app server?
<p>-- Rob
<p>"uma s. patil" wrote:
<blockquote TYPE=CITE>Can Server host multiple containers?</blockquote>
<pre>--
AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
by Michael Girdley, Rob Woollen, and Sandra Emerson
http://learnWebLogic.com</pre>
</html>

Similar Messages

Usage Tracking for BI Server Hosting Multiple Repositories

Hi all,
I've got my BI Server hosting two repositories:
[ REPOSITORY ]
DemoApp1 = DemoApp1.rpd, DEFAULT;
DemoApp2 = DemoApp2.rpd;
And started two Presentation Services connecting to these two repositories respectively, and two web front-ends at /analytics and /analytics2 to display the two different catalogs.
Next, I enabled usage tracking with direct insert to the following physical table:
PHYSICAL_TABLE_NAME = "OBIEEREP".""."OBIEEREP"."S_NQ_ACCT" ;
CONNECTION_POOL = "OBIEEREP"."Connection Pool" ;
Both repositories has the above physical table and connection pool defined. In DemoApp1.rpd, "OBIEEREP"."Connection Pool" points to a database OBIEEDB1, and in DemoApp2.rpd, it points to a database OBIEEDB2.
But then the problem occurs. All usage tracking data are inserted to OBIEEDB1 only, no matter which web front-end they are from. I tried removing the "DEFAULT" from NQSConfig.ini, but this doesn't help.
Is there any way to configure BI Server to insert usage tracking data from /analytics to OBIEEDB1, and those from /analytics2 to OBIEEDB2?
Thanks very much!!!
Edited by: Kaphenda on Jan 18, 2010 2:34 PM

HI Kaphenda,
That's probably just a side-effect of having two repositories. Keep in mind that having multiple repositories and multiple presentation servers is not support by Oracle, so they were not on the hook to modify the Usage Tracking algorithm to write to two different databases. It seems to me like they either didn't anticipate this scenario, or they didn't want to program for this scenario.
I don't think you have too many options in terms of making OBIEE insert the traffic logs into the appropriate database. However, once the data has been inserted, you can do just about anything you want to it in terms of ETL, triggers, materialized views, etc.
Here's what I would recommend:
1) Have the OBIEE usage tracking information logged into a neutral schema.
2) Write a materialized view in database 1: CREATE MATERIALIZED VIEW S_NQ_ACCT AS SELECT * from S_NQ_ACCT@NEUTRAL_SERVER WHERE REPOSITORY_NAME = 'DemoApp1'
3) Write a materialized view in database 2: CREATE MATERIALIZED VIEW S_NQ_ACCT AS SELECT * from S_NQ_ACCT@NEUTRAL_SERVER WHERE REPOSITORY_NAME = 'DemoApp2'
You can specify the refresh frequency of these materialized views to be as frequent as you want. The great thing about this strategy is that you get the best of all worlds. Each database has the traffic information broken down by their personal RPD. But the neutral schema can provide Global reporting across both repositories which can be very valuable itself.
Good luck and if you found this post useful, please award points!
Best regards,
-Joe
Edited by: Joe Bertram on Jan 18, 2010 9:59 AM

How do I host multiple domains on a single Messaging Server?

How do I host multiple domains on a single Messaging Server?
<p>
To host multiple domains on one Messaging Server, use the
mailAlternateAddress attribute. If you want to host two domains
(customer1.com and customer2.com) on your server mail1.domain.com,
make sure that:
The various domains (in DNS) point to the installed mail server
(you must have the MX records that
points mail for customer1.com to mail1.domain.com and
customer2.com to mail1.domain.com)
That each person receiving mail at customer1.com and
customer2.com has an appropriate mailAlternateAddress
attribute describing the appropriate email address. For
instance, John Doe can have an email address (i.e. the value
of the 'mail' attribute for the John Doe LDAP entry) of
[email protected] and receive his mail on
[email protected] (the value of the mailAlternateAddress
attribute)
With Messaging Server 3.5, mailAlternateAddress can take the
form of @mail1.domain.com. If jdoe's mailAlternateAddress is
set to @mail1.domain.com, mail sent to [email protected]
will be delivered to [email protected]

jaygatsby1123 wrote:
So what exactly am I doing with virtual hosts? There is a place for Aliases... What would I put in the "Aliases" box?
Any other host name that you want to resolve to the specified virtual host. It's quite literally an alias.
if you want www.example.com and www.example.org to end up at the same web site and you already have a virtual host — Apple refers to virtual hosts as sites — configured for www.example.com in Server.app, then you'd add www.example.org as an alias for the www.example.com virtual host (site).
Virtual hosts are implemented in a web server using some details of the HTTP or HTTPS protocol, and what the web browser (client) specified. The client gets handed an IP address or a domain name by the user, and the client then fetches the associated IP address for the target web server from the client's DNS services or local host database, and the client then connects to the IP address and passes over the text string that the user had requested — the IP address or domain name or even some local shortcut set up in the client system — via the HTTP or HTTPS protocol. The web server receives and processes this arriving text string from the client, and uses it to select which web site to render back to the web client. One subtle detail lurks here, too: the server's own DNS configuration really isn't involved in the selection of the virtual host.

Can you host multiple domain names on mobile me with iWeb '09?

Hi
Can anyone help, before I upgrade to iLife '09, I have a personal web domain name which I host on my mobileme account. My girlfriend now wants a website and I have bought her a domain name and want to use iWeb to design it but I can't seem to host multiple domains on iWeb '08, can you with iLife '09? Or will she have to buy her own mobile me account? Any help will be great!!!
Thanks

MobileMe -MME -is Apple's hosting service.
Domain Name System - DNS translates an understandable address like www.mywebsite.com into the IP address which is a number like 40:75:92:301.
Cname is a name of record in a database that records what domain name goes to what IP address.
IP address is just a unique number that identifies any device connected to the internet.
An FTP client is an application the uploads your files to a server using File Transfer Protocol.
I mainly use Web Site Maestro because it doesn't just upload the files but optimizes them first to remove all the unnecessary code that iWeb creates to allow your website to download at least 30% faster.
I also use Yummy FTP for sorting out and keeping track of my files on the server and uploading folders of images and music files along with their assets for flash presentations.
I have used Host Excellence for years because of the way they allow you to name your own root folder on the server and also their great tech support.
FTP and servers can be a bit confusing but, if you have a good hosting company, you can get by on very little knowledge and understanding. I do!
I couldn't agree more with you about the acronyms and jargon. The more people use them usually means the less they know. One of the most misused words is "domain". I tried to sort that one out here...
http://www.iwebformusicians.com/SearchEngines/Upload.html
Now I'm going FUH and ATNP.

Noob needs help with hosting multiple sites

Hello I am new to this multi hosting. I have looked on the forum for answers but haven't found any. I am trying to figure out how to host multiple sites. I have my dns working for my default site "example1.com", but need to know if I need to add another dns record for my second site. "example2.com". Also when I point to the new fold that has the second site in it and I assign it port 82 for testing purposes I get an error message saying 403 access forbidden. I need to find out how get permission to view the site for the public. Its in a separate folder on an external hard drive right now for testing purposes. Can any body help me or point me in the right direction? Thanks so much!!!
-Kcam1999

{quote}
While what you are telling him is technically functional, it is not correct
I beg to differ, Paul. You are the one that is not correct.
CNAMES have been deprecated as of some years ago
What? huh? really?
Please show me any official document that states this (and not someone who just started a rumor because he didn't understand them). Indeed, the DNS RFC makes no such claim.
{quote}
I stand very much corrected. CNAMEs are not officially deprecated. Interestingly, your post cites precisely what happens when CNAMES used carelessly. How many transactions are needed to resolve Apple's CNAME chain below? RFC1912 (http://www.faqs.org/rfcs/rfc1912.html) has some recommendations that suggests Apple's own network folks have, like me and perhaps even others here, some learning to do. Is that a 'best practice?'
{quote}> Then make sure you tell Apple since this site depends on the use of CNAMEs:
dig discussions.apple.com
discussions.apple.com. 492 IN CNAME discussions.apple.com.edgesuite.net.
discussions.apple.com.edgesuite.net. 4427 IN CNAME a1399.b.akamai.net.
a1399.b.akamai.net. 2 IN A 128.241.220.82
a1399.b.akamai.net. 2 IN A 128.241.220.72
In fact, it uses TWO CNAMES in a chain. Oh my.{quote}
From RFC1912 (which I'm sure many have now read here), section 2.4 is as follows:
{quote}... having chained records such as CNAMEs pointing to CNAMEs may
make administration issues easier, but is known to tickle bugs in
some resolvers that fail to check loops correctly. As a result some
hosts may not be able to resolve such names.{quote}
{quote}> It is not valid to say "don't use these because they could cause problems'. A records can be just as problematic, as can PTRs. Let's not even talk about MX.{quote}
How, exactly, does is an A record problematic? No chains, no additional lookups, no wasted cycles...
We differ here -- and if we are dealing with a newbie, we don't need to enter into unnecessary complexity UNTIL it is a requirement for their solutions.
{quote}> There are many valid reasons to use CNAMEs in DNS, not least of which is the ease of moving a service if it uses CNAMEs. For example, if you have 10 A records all pointing at the same server and you want to migrate to a different machine you have to locate and update all 10 records. If they used a CNAME to the physical server you could move them all at once using a single change. This is especially important in cross-domain links where you may not control all the origin zone files.
{quote}
You're somewhat reaching here, and it is well beyond the scope of the OP's post or needs (well, until they tell us more about their needs, I suppose). There is nothing difficult about 'finding' and updating the necessary records. The final example you gave is a good one and I'll say THAT is an appropriate use of a CNAME, 'though there are other workarounds for it.
Thanks for keeping me honest.

Crio to host multiple remote front panels

Hello all,
I've a question abt remote front panel hosted by a cRIO system (cRIO9068 to be more specific, running RTOS).
I have a top level VI (main) as the start up vi in my cRIO system, and it would call a subvi during run. I'd like to enable remote front panel for both the main vi and the sub vi so that I can see both front panels using a web browser. I'm not sure if such a configuration is possible at all and would like to listen to comments by users who have similar experiences.
Thank you very much!
Best,
Jidong

Hello hhaamm,
To the best of my knowledge, I don't believe it is possible to host multiple remote front panels from the same executable, and, if it is, would be very difficult. The NI Web Server configuration file only specifies one port on which an executable can run web services, like remote front panels. In, short, I am not sure how you would be able to accomplish this.
Another thing to keep in mind is that what you want to accomplish can be done in many different ways that would be much easier than creating multiple remote front panels.
One of these is to move all of your controls and indicators to the top level VI. i.e. make the data you want to see from the sub-VI an output of the sub-VI and create a new indicator for this on your top-level front panel. This way you can still use a remote front panel and can use different decorations and labels to separate the top-level and sub-VI outputs.
Another way to do this is to use the tab control to create multiple tabs, one for your top-level indicators, and one for your sub-VI indicators. This would still enable you to use remote front panels and would allow for the separation of your different indicators. Here is a note on how to do that:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/creating_tab_controls/
And here is a more in-depth forum post on how to create them:
https://forums.ni.com/t5/LabVIEW/how-do-you-create-tabs-on-the-front-panel/td-p/201495
The final way I can think how you would accomplish this is to use a web service instead of remote front panels and host the output of the sub-VI as a separate website.
Hope this helps!
Collin D.
Applications Engineer
National Instruments

Sql server with multiple instance

hi All,
i want to install sql server with two instance and i want to assign two separate is ips for both default instance and named instance and both should work like
two different server
note: If i logged with one ip(default instance) it should show its own databases not both or named instance databases
thanks
chintala

Hi chintala,
According to your description, if you want to assign the two different IP to stand for default instance
and named instance, I recommend you set up aliases on a SQL Server with multiple instances. For example, a physical server is named WinServer and 2 instances of SQL Server named WinServer and WinServer\instance1.
We need to add 1 IP addresse to the WinServer, there is one IP address already assigned to WinServer, 192.168.1.1, by adding one new IP's, 192.168.1.2 .
We need to move into DNS to configure our host names and aliases. The physical machine must be steup as a static IP in DNS. SQLAlias1, which point to the default instance on WinServer, will be setup as a DNS with an address of 192.168.1.1.
SQLAlias2, which will point to WinServer\Instance1, will be setup as a new Host (A) record in DNS with an address of 192.168.1.2.
When everything has been completed on the DNS side, you need to open up SQL Server Configuration Manager on WinServer and configure the protocols for each instance one at a time, restart the 3 SQL services.
For more information about how to set up aliases on a SQL Server with multiple instances, you can review the similar article.
http://kevine323.blogspot.com/2013/08/setting-up-aliases-on-sql-server-with.html
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Hosting Multiple SSL Sites on Separate IP Addresses

Hosting Multiple SSL Sites on Separate IP Addresses
I currently have a web server (XServe) hosting a number of different sites from its main IP address on port 80 using Apache 1.3. This has been working great, the ServerAdmin GUI has been pretty good about creating the appropriate Apache configs, and everybody is happy.
I have one particular site that I want to use SSL with so I decided to purchase a cert (from GoDaddy). Since I have one other cert on the server assigned to the main server IP, I understand that the appropriate way to setup additional SSL certificates is to bind another IP address to the XServe and use that IP. I was unable to use ServerAdmin to install my new certificate (not surprisingly) probably since it is a chain certificate, however I have been able to do it by hand and it seems to be working as intended…mostly.
This is where my problem begins. The site that I wanted to add SSL to is currently hosted on the main IP address (x.x.x.173:80) and the SSL certificate is working on the newly bound IP address (x.x.x.178:443). Fundamentally it would seem appropriate to change the IP address of the non-SSL site to match the new IP, except on port 80 – So I can achieve a seamless blend between standard and SSL (when necessary). The problem is that I can’t get Apache to work this way. Maybe I am missing a step, or overlooking something.
Excerpt from current, working (non-SSL) config: (Names have been changed to protect the innocent.)
<VirtualHost x.x.x.173:80>
ServerName www.site.com
ServerAdmin [email protected]
DocumentRoot "/Library/WebServer/Documents/www.site.com"
</VirtualHost>
Excerpt from current, working (SSL) config:
<VirtualHost x.x.x.178:443>
ServerName www.site.com
ServerAdmin [email protected]
DocumentRoot "/Library/WebServer/Documents/www.site.com"
</VirtualHost>
changing the first entry’s ip address to match the second one causes the site to be unresponsive (using the IP address to point the browser to the site) but the SSL version keeps working. Any suggestions would be greatly appreciated.
Thanks,
Jake
PowerBook, XServe G5 Mac OS X (10.4.6)

Thanks for your reply Roger, here are the results that you’ve requested:
I deleted a few lines that were redundant and unrelated (no errors)
Results of apachectl configtest:
Processing config directory: /etc/httpd/sites/*.conf
Processing config file: /etc/httpd/sites/0012x.x.x.173_80www.site.com.conf
Processing config file: /etc/httpd/sites/0016x.x.x.178_443www.site.com.conf
Processing config file: /etc/httpd/sites/virtualhostglobal.conf
[Thu Apr 6 09:06:27 2006] [warn] module mod_php4.c is already added, skipping
Syntax OK
Results from netstat -a -n | egrep 178:
tcp4 0 0 x.x.x.178.53 . LISTEN
udp4 0 0 x.x.x.178.123 .
udp4 0 0 x.x.x.178.53 .
Results from tail -f /var/log/httpd/error_log
/etc/httpd/sites/0012x.x.x.173_80www.site.com.conf
Processing gonfig file:
/etc/httpd/sites/0016x.x.x.178_443www.site.com.conf
Processing config file: /etc/httpd/sites/virtualhostglobal.conf
[Thu Apr 6 09:21:10 2006] [warn] module mod_php4.c is already added, skipping
[Thu Apr 6 09:21:10 2006] [notice] Apache/1.3.33 (Darwin) PHP/4.3.11 mod_ssl/2.8.24 OpenSSL/0.9.7i configured -- resuming normal operations
[Thu Apr 6 09:21:10 2006] [notice] Accept mutex: flock (Default: flock)
When I try to hit the site on port 80 http://x.x.x.178 there are no results, https://x.x.x.178 works great.
Thanks again for your help, hopefully this can shed some light on my problem,
Jake
PowerBook, XServe G5 Mac OS X (10.4.6)
PowerBook Mac OS X (10.4.6)

Issue listeneing queue from Weblogic Cluster server with multiple managed server

Haveing issue listeneing queue from Weblogic Cluster server with multiple managed server.
Weblogic Cluster structure is like
Weblogic Cluster01
--ManagedServer01(http://server01.myhost.com:7001)
--ManagedServer02(http://server02.myhost.com:7001)
JMS Servers
JMSserver01 targeting: ManagedServer01
JMSserver02 targeting: ManagedServer02
JMSmodule
ConnectionFactory01 targeting:JMSserver01,JMSserver02
UDQueue01 targeting:JMSserver01,JMSserver02
Uniform Distributed Queue in Monitoring tab showing like this
mysystemmodule!JMSserver01@UDQueue01
mysystemmodule!JMSserver02@UDQueue01
So when I am sending message to any Host(by specifying the provider URL) its distributing equally on both server like
mysystemmodule!JMSserver01@UDQueue01 10
mysystemmodule!JMSserver02@UDQueue01 10
But when try to listen message from these queue, it is listening from one server, for which URL given to connect.
mysystemmodule!JMSserver01@UDQueue01 0
mysystemmodule!JMSserver02@UDQueue01 10
untill I connect to other server by giveing its URL, will not able to access other message left on the queue.
Solutions that tried
1) we have tried give both server URL coma sparated in provider URL
we need to configur same scenario for 5 managed server with 3 listener on other servers.
Do any one have solution for this.

You need to have:
1. Consumers connected to each UDQ member
OR
2. If no consumers in some of the members is expected, you can configure Forward Delay (specify the amount of time, in seconds, that a queue member with messages, but with no consumers, will wait before forwarding its messages to other queue members that do have consumers):
http://docs.oracle.com/cd/E12839_01/apirefs.1111/e13952/taskhelp/jms_modules/distributed_queues/ConfigureUDQGeneral.html
For example you can set it to 10 (10s)
Additional Information here:
http://docs.oracle.com/cd/E23943_01/web.1111/e13727/dds.htm#i1314228
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/mbeans/DistributedQueueBean.html?skipReload=true#ForwardDelay
How Does JMS Load Balancing Work with Distributed Queues and Uniform Distributed Queues? (Doc ID 827294.1)
I hope this helps
Best Regards
Luz

Single SSL Web Listener for hosting multiple web sites

Hi All,
We are currently hosting multiple websites with Single HTTP Web Listener .. As of now it's everything is working fine..
Now we have planned to have SSL for the hosted sites
Each hosting site will have different SSL Certificates and i am little confused to use Single SSL Web Listener to host multiple web Sites...
Can any one guide me to use Singel SSL Listener for using all hosted sites..
We are having TMG on DMZ Network on Single Nic..
KJSUBBU

Hi,
it is no problem to host multiple SSL websites with only one IP address / certificate on the TMG Server. Only the authentication options for the published websites must be unique, because you cannot use multiple authentication options in one Listener
TMG Server uses HTTPS to HTTPS bridging, so you can use Host header and more to distinguish between the different internal websites:
http://technet.microsoft.com/en-us/library/cc995178.aspx
Regarding the SSL certificate on the internal webservers. TMG must trust the issuing certificate authority which issued certificates for these websites and the name you used to connect from the TMG Server to the internal webserver must part of the CN (Common
Name) or SAN (Subject Alternate Name) on the certificates of the webservers
regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

Keepalive for Single web server with Multiple URLs

We require to configure CSS ( cisco 11500 series) switch configuration. Currently we have the settings mentioned below :
1. We have two IIS servers behind CSS switch hosting multiple websites for load balancing.
2. Keepalive type we are using is HTTP-HEAD
3. There is one virtual IP assigned to the CSS switch for all websites.
Now we have to provide the keep-alive URIs for the CSS switch. I am not sure which URI we have to provide for keepalive status check.
As per my understanding
1. there would be DNS entries for the websites pointing to the VIP of the CSS switch
e.g abc.com --> VIP
xyz.com --> VIP
aaa.com --> VIP
2. Name based virtual hosting to be configured on IIS server (i.e host header configuration)
3. We have to provide the URI for the keepalive prameters. As there are multiple websites are hosted on the server,firstly , is it possible in CSS switch to configure multiple keepalives for different websites ? secondly is it possible to give the complete URL (http://abc.com ) in the URI parameter of keepalive settings ? typically these settings are like
IP address : < IP address of Node >
URI : /index.html
I am not clear how this all settings will work. What is the ideal way or best practice of configuring the load balancing in the scenario of multiple websites to be hosted on IIS servers with CSS switch loadbalancer.
Is it correct to assign 1 VIP for multiple websites on server nodes?
Your inputs will be highly appreciated.
Thanks in Advance.

We have done this multiple ways.
1. we did port mapping on the backend.
server www1
ip address x.x.x.x
keepalive type http
keepalive port 80
keepalive uri "/lb.htm"
acitve
server www2
ip address x.x.x.x {same as above}
keepalive type http
keepalive port 81
keepalive uri "/lb.htm"
active
or via host header checking
2.
service www1-1
ip address x.x.x.x
keepalive type script ap-kal-httptag "www1-1 /lb.htm www1"
active
service www2-1
ip address x.x.x.x {same as above}
keepalive type script ap-kal-httptag "www2-1 /lb.htm www2"
active
With the script ap-kal-httptag, you will need to have dns entries that the CSS will be able to resolve to the individual web site addreses.
-Rich

Can Snow Leopard host multiple web sites...

I have set up Snow Leopard to host a website by putting my files in the Home/Library/Webserver/Documents to access this site publicly. It works fine. How do I host multiple websites with 1 public IP with out having to use Leopard Server?
Any help is appreciated.

just make a folder in /Library/Webserver/Documents and put all the new stuff there. then add the name of this folder to the website address when entering it in a browser.

Hosting multiple web sites.

Dear members:
I am considering OS X Server for a personal project and would like some advice to help me decided what route to take.
My computer will soon be turned into a server hosting my web sites and some other services at my home office. I am thinking about OS X Server as I have done some research and found OS X to require quite a bit of work so that it can do virtual hosting.
How simple is it to configure virtual hosting in OS X Server ? I am considering the latest Leopard version in case it matters. I am not experienced and wish to employ an application that will simplify this process.
Any help will be very appreciated.
Thank you,
Joseph Chamberlain

Joseph:
Although I wouldn't touch any Web-server software other than Mac OS X Server, I should warn you that Apple occasionally favors "pretty" over "practical." I've used PCs and Macs since the Mac Plus was hot, and I've used OS X Server 10.3, 10.4, and now 10.5.3. The last is really excellent, with a gorgeous/powerful Server Admin user-interface, many supporting tools, and thousands of hardball features, but like many Apple "industrial-strength" software products, Mac OS X Server still contains a very few really BAD bugs -- or "oversights" if you prefer.
Before taking the plunge (maybe you already did?), read up on troubleshooting OSX Server's Postfix-based mail service. Even the 10.5.3 upgrade can turn "easy setup" into major frustration; you can do everything by the book and still have weird mail-server glitches. Don't even get me started on documentation for and "centralized" management of Open Directory, Kerberos, etc. I will be migrating to SSL mail security to avoid the user-directory thrash.
When trying to make OSX Server 10.5.3 (a clean install) host *multiple top-level Web domains under a single IP number*, Apple documentation online and on disc didn't offer enough setup detail and virtually NO troubleshooting. Google.com can find what's missing. This archived earlier forum thread saved my bacon....
Topic : "multiple web sites"
http://discussions.apple.com/thread.jspa?threadID=682507
In a nutshell: a multiple-website installation of OSX Server requires careful interaction between the domain-name, IP#, port#, and aliases for each site. When I created my several sites. I relied on the default installation (and Apple instructions) which leaves a wildcard "*" asterisk in each site's Web>Sites>Aliases>WebServerAliases field (in Server Admin). No matter how I diddled with each site's domain-name, IP#, and port# (to create unique combinations), I couldn't force the individual domains to get served independently (despite their shared static IP#) until I DELETED the wildcard WebServerAliases for all the sites. Poof, now it works fine.
Part of the problem is that Apple still publishes documentation on its legendary *drool-proof paper* ("do not expose your LaserWriter to open flame").

RAS Server allowing multiple clients in and telnet redirection to correct reciever.

Product being used:
IOS (tm) 3700 Software (C3725-ADVIPSERVICESK9-M), Version 12.3(26), RELEASE SOFTWARE (fc2)
cisco 3725 (R7000) processor (revision 0.1) with 118784K/12288K bytes of memory.
R7000 CPU at 240MHz, Implementation 39, Rev 3.3, 256KB L2 Cache
MICA-6DM Firmware: CP ver 2940 - 7/24/2002, SP ver 2940 - 7/24/2002.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface(s)
24 Serial network interface(s)
24 terminal line(s)
1 Channelized T1/PRI port(s)
In combination with a server running:
tac_plus version F4.0.3.alpha.v9 (Extended Tac_plus)
• The goal is create a RAS Server to allow multiple clients to call in and separate them via DNIS.
Then specify an auto-command to send the traffic to the correct receiver of that call.
We are not stuck on doing this with tacacs if there is a more efficient way of doing this.
The thought was to only send the authorization to tacacs to allow for the dnis map to point the traffic to the correct receiver.
aaa authentication login DIALIN none
aaa authorization exec DIALIN none
• If we set aaa authentication login DIALIN none it works without any issues but does not go to the tacacs server and therefore does not allow us to use the dnis map commands.
aaa authentication login DIALIN group AAA-mydial
aaa authorization exec DIALIN none
• If we set aaa authentication login DIALIN group AAA-mydial using the aaa group server tacacs+ AAA-mydial it goes out to the tacacs server as expected but then it requires a login ID at least in order to get into a session.
aaa authentication login DIALIN none
aaa authorization exec DIALIN group AAA-mydial
• When we change the aaa authorization exec DIALIN group AAA-mydial it fails and does not even send the information out to the tacacs server.
aaa authentication login DIALIN “see above for options “
aaa authorization exec DIALIN “see above for options”
aaa new-model
aaa group server tacacs+ AAA-2035554677
server 172.16.0.109
aaa group server tacacs+ AAA-2035554570
server 172.16.0.109
aaa group server tacacs+ AAA-2035554571
server 172.16.0.109
aaa group server tacacs+ AAA-mydial
server 172.16.0.109
aaa authentication login DIALIN none
aaa accounting exec default start-stop group AAA-2035554570
aaa dnis map enable
aaa dnis map 2035554677 authorization network group AAA-2035554677
aaa dnis map 2035554677 accounting network start-stop group AAA-2035554677
aaa dnis map 2035554570 authentication login group AAA-2035554570
aaa dnis map 2035554570 authorization network group AAA-2035554570
aaa dnis map 2035554570 accounting network start-stop group AAA-203554570
aaa dnis map 2035554571 authorization network group AAA-2035554571
aaa dnis map 2035554571 accounting network start-stop group AAA-2035554571
aaa session-id common
ip subnet-zero
ip cef
line con 0
line 65 88
no motd-banner
no exec-banner
privilege level 15
no vacant-message
login authentication DIALIN
modem Dialin
transport preferred none
transport output telnet
escape-character NONE
telnet transparent
line aux 0
line vty 0
exec-timeout 0 0
password cisco
line vty 1
exec-timeout 0 0
transport preferred telnet
transport input all

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
NOTHING LIKE ANSWERING YOUR OWN POST:::
--Well after looking around I found the following on a forum which seems to have gotten us to our destination but uses local authentication to direct the DNIS numbers to the correct receiving system. Just need to give things a final polishing to make the configuration as clean as possible.
hostname Router
boot-start-marker
boot-end-marker
logging buffered 65536 debugging
enable password cisco
clock timezone EDT -5
clock summer-time EDT recurring
aaa new-model
aaa user profile TEST
aaa group server tacacs+ AAA-mydial
server 172.16.0.109
!!!!! Below defines the AAA-mydial group you are sending the accounting information to.
aaa group server radius AAA-myradius
server 172.16.0.109 auth-port 1645 acct-port 1646
!!!!! Below you are using the DNISTEST local group for authentication and authorization.
aaa authentication banner ^C^C
aaa authentication login DNISTEST local
aaa authorization exec DNISTEST local
aaa accounting update newinfo
aaa accounting connection DNISTEST start-stop group tacacs+ group AAA-mydial
aaa session-id common
ip subnet-zero
ip cef
ip audit po max-events 100
isdn switch-type primary-ni
isdn voice-call-failure 0
isdn logging
!!!!! Below you are directing which DNIS number goes to which receiving host.
username cisco-kid password 0 cisco
username DNIS##1212 nopassword dnis
username DNIS##1212 autocommand telnet 172.16.0.5 22 /stream /quiet
username DNIS##4677 nopassword dnis
username DNIS##4677 autocommand telnet 172.16.0.6 22 /stream /quiet
username DNIS##4570 nopassword dnis
username DNIS##4570 autocommand telnet 172.16.0.7 22 /stream /quiet
controller T1 1/0
framing esf
linecode b8zs
pri-group timeslots 1-24
interface FastEthernet0/0
ip address 172.16.0.35 255.255.255.0
speed auto
full-duplex
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface Serial1/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice modem
no cdp enable
interface Group-Async0
no ip address
encapsulation slip
dialer in-band
dialer-group 1
async mode interactive
group-range 65 88
interface Dialer0
no ip address
dialer in-band
dialer idle-timeout 3600
dialer-group 1
ip classless
ip route 0.0.0.0 0.0.0.0 172.16.0.254
no ip http server
no ip http secure-server
ip tacacs source-interface FastEthernet0/0
dialer-list 1 protocol ip permit
!!!!! Below you are further defining the tacacs server and the encryption key to be used.
tacacs-server host 172.16.0.109 key cisco
no tacacs-server directed-request
radius-server host 172.16.0.109 auth-port 1645 acct-port 1646 key ras-secret123
line con 0
!!!!! Below you are directing all calls to go to DNISTEST for authentication, authorization, & accounting.
!!!!! Then we are stripping all prompting so that the connection is completely clean.
!!!!! The only issue was that the aaa banner was still there which is why there is a
!!!!! “aaa authentication banner ^C^C” above in the aaa section.
line 65 88
no motd-banner
no exec-banner
privilege level 15
authorization exec DNISTEST
accounting connection DNISTEST
no vacant-message
login authentication DNISTEST
modem Dialin
transport preferred none
transport output telnet
escape-character NONE
telnet transparent
line aux 0
line vty 0 4
exec-timeout 0 0
password cisco
transport preferred telnet
transport input all
transport output all
escape-character NONE
telnet transparent
end
tacacs+ config just needs to have an accounting log file defined and all output will be logged there:
Here is my tac_plus.cfg file:
===========================================================
key = "cisco"
accounting file = /var/log/tac_plus-f404.log
----------------------- the info below this line is irrelevant ---------------------------
--- Just from me trying to use tacacs for the authentication & authroization----
user = default {
        login = nopassword
        service = exec {
               autocmd = "telnet 172.16.0.5 22 /stream /quiet"
user = Router {
        login = nopassword
        member = dialup
group = dialup {
        default service = permit
        expires = "Apr 1 2010"
        service = exec {
                idletime = 15
                autocmd = "telnet 172.16.0.5 22 /stream /quiet"
        cmd = disconnect {
                permit .*
user = test {
        name = "Dial"
        login = nopassword
        member = dialup

How to control one server with multiple clients via TCP/IP

I am wanting to control a single server with multiple clients. Only one client would be active at a time, so there would be no conflict. I want to use TCP/IP. So far, I have programmed a cluster that passes data back to the server with no problems. The challenge come in when a second client is added to the mix. I have't been able to figure out how to turn each client on and send the appropriate data and then turn it off so it doesn't keep sending the same data to the server.
Here are the things that I have considered and did some preliminary testing, but don't really know how to impliment:
1. Send a numeric on the front of the cluster packet that tells the server that data is on the way.
2. Send a boolean on the front of the cluster packet to somehow turn the server TCP/IP on.
The problem I have found is that LabVIEW TCP/IP doesn't like to be turned on and off. If it doesn't get the data it expects, it goes into a reset mode and that kills the response time.
Any help?

You should consider implementing a set of simple one-byte commands that can be sent back and forth between the Server and the Clients. You can base all of these ideas off the example in the Example Finder under Networking >> TCP and UDP called Multiple Connections - Server.
You will have two loops in the server VI: one to wait for new connections, and one to send and receive data from the existing connections. For instance, after one of the clients connects, it can request control of the server to send data to it by sending the character "R" for request. Every time the send/receive loop of the Server executes, the first thing it can do is to check all the existing connections to see if any of the clients have sent a control request ("R"). If so, it will create a buffer (array) of control requests. This could be in the form of Connection IDs or indexes in the array for a particular Connection ID. Your choice.
After the Server receives a request for contol, if it is not already under control by another client, then it can send a response to the first client on the control request list. For instance, the server could send the first client a "S" command for send. Note that after the clients send their control request, they should execute a TCP Read and wait indefinitely for the server to respond with the one-byte "S" command. Then, once the client in control is finished sending data to the server, it could send the character "X" telling the Server to release it from control.
The example I mentioned above already does a similar thing. Note how when a client wants to disconnect, they send the letter "Q". You can see this in the Multiple Connections - Client VI. The Server then checks each individual connection to see if it's received this one-byte command, and if it has, it closes the connection to the client. This is what you would want to implement, but instead of having just one command, you'll have to distinguish between a few and build up a buffer of control requests.
Finally, if a client does decide to disconnect in your application, they could send the command "Q" just like the example above. At this point, close the connection and remove that Connection ID from the array of connections. You will also have to handle the case that this client was in the request control waiting line when it disconnected, in which case you need to delete it from that array as well.
This will definitely work for you, but it will take some work. Best of luck!
Jarrod S.
National Instruments

Server host multiple containers

Similar Messages

Maybe you are looking for