JCO.SERVER could not find the server function
Hi,
I am calling "BAPI_COMPANY_GETDETAIL".thuough the zprogram"ZBAPI_COMPANY_GETDETAIL"
REPORT ZBAPI_COMPANY_GETDETAIL.
DATA:BEGIN OF ITAB,
RCOMP LIKE T880-RCOMP,
END OF ITAB.
ITAB-RCOMP = 99999.
CALL FUNCTION 'BAPI_COMPANY_GETDETAIL'
EXPORTING
COMPANYID = ITAB.
IMPORTING
COMPANY_DETAIL =
RETURN =
The Details I Gave......
In SM59 of R/3:
PROGRAMID:LCRSAPRFC_PIT
GATEWAYHOST:PITEST
GATEWAYSERVICE:sapgw01
Tested the connection and it is running
ID:
In Communication Channel.
Application server (Gateway):PITEST
Application server Service (Gateway):
PROGRAMID:LCRSAPRFC_PIT
RFC Metadata Repository parameter.
ip of XI Server
System No Xi System NO
username
pwd
In SM58 I find the Following error.
"JCO.SERVER could not find the server function BAPI_COMPANY_GETDETAIL.
I Tested RFC ADAPTOR in RWG and it is ok.
I do not Understand where the problem is.
Please clarify.
Thanks,
Srinivasa
Thanks for the reply,
Yes RFC is in the Sender side.
I am calling "BAPI_COMPANY_GETDETAIL".thuough the zprogram"ZBAPI_COMPANY_GETDETAIL"
REPORT ZBAPI_COMPANY_GETDETAIL.
DATA:BEGIN OF ITAB,
RCOMP LIKE T880-RCOMP,
END OF ITAB.
ITAB-RCOMP = 99999.
CALL FUNCTION 'BAPI_COMPANY_GETDETAIL'
EXPORTING
COMPANYID = ITAB.
IMPORTING
COMPANY_DETAIL =
RETURN =
The Details I Gave......
In SM59 of R/3:
PROGRAMID:LCRSAPRFC_PIT
GATEWAYHOST:PITEST(XI system name)
GATEWAYSERVICE:sapgw01
Tested the connection and it is running
ID:
In Communication Channel.
Application server (Gateway):PITEST(XI system name)
Application server Service (Gateway):
PROGRAMID:LCRSAPRFC_PIT
RFC Metadata Repository parameter.
ip of XI Server
System No Xi System NO
username
pwd
In SM58 I find the Following error.
"JCO.SERVER could not find the server function BAPI_COMPANY_GETDETAIL.
I Tested RFC ADAPTOR in RWG and it is ok.
I do not Understand where the problem is.
These is what I gave,
Similar Messages
-
my iPod is not working.
It doesn't turn on. it is not recognised my my Mac, and iTunes says that sentence.
what can I do?
Thanks in advanceHi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
-Griff W. -
RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'
Hi, All
the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolve my problem. all JCO, RFC connections and SDL DATA supplier(VA) seem OK. error message in SM21 is "Could not send SLD data"
detail from SM21
The system could not send the data that has been collected automatical
for the System Landscape Directory (SLD). Check whether the gateway
configured in transaction RZ70 has been started and whether the SLD
bridge has been registered with this gateway.
You can use transaction SM59 to check this in the sending system for t
implemented RFC destinations. The RFC destinations have the standard
names "SLD_UC" for Unicode sending systems and "SLD_NUC" for non-Unico
sending systems. If a different RFC destination has been entered in
RZ70, check this destination instead.
You can use the Gateway Monitor to check the target gateways. In ABAP
systems, this monitor is started with transaction SMGW, or you can use
the external SAP program "gwmon". Check whether the specified gateway
has an active registration.
OF COURSE I checked RFC of SLD_UC and SMGW
any different ideas
Regards
ABHHi
Please check the following notes are implemented
Note 906454
Note 907729
You may be aware but if you are not --->RZ70 creates the required SLD* RFCs during runtime - therefore if you have defined these RFCs manually first using the same namespace you can get RFC conflicts which result in a failed submission
Please also check the user in the RFC is known to both systems and has required authorization to write to SLD
Generally with SLD you have to install or select a suitable gateway to handle incoming data supply traffic
Also the gateway you are using has be known to SLD and reflected in RZ70 - i.e these defintions have to be the same
It is also recommended to delete all references to SLD_* RFCs in data supplier and target SLD
after a failed submission attempt to allow RZ70 to recreate these consistently once the above has been checked
Best wishes
Stuart -
JCO.Server could not find server function 'CONTROL_RECIPE_AVAILABLE'
Hi Experts,
I've been trying to read some of the topics in the forums to find answers about the error JCO.Server could not find server function but still haven't resolve the issue.
Basically, the scenario is from SAP r/3 to PI 7.1 ehp1 (process integration) system.
All of the aforementioned steps we're done.
R/3 (SAP) end
1.) Create RFC destination (T)
2. ) Indicate the program ID
3.) Indicate the server/hostname
4.) Indicate the sap gateway
Test connection was made and it was successful.
SAP PI end.
Integration Directory (Let me skip from the basics and state directly the setup of my senderRFC)
1.) RFC Comm Channel (set as Sender)
2.) Indicated the server hostname (sending system), sap gateway and Program ID (basically what was indicated in RFC setup in SAP end)
3.) RFC Metadata Repository Parameters (In here I used the details of PI environment)..Created user with SAP_ALL profile..I used system without Load Balancing (Parameter, AppServer, SysNo, Logon User, Logon Password, Language and Client)
I was able to test a message from SAP end but still "JCO.Server could not find server function" was the result upon checking sm58.
Did I miss something from my setup and config?Hi Michal,
I guess there's a big difference with RFC Server Parameters and with RFC Metadata Repository Parameters.
Note: Im using PI 7.1 ehp1
For RFC Server Parameters it includes:
- Application Server (gateway)*
- Application Server Service (gateway)*
- Program ID*
For RFC Metadata Repository Parameters it includes:
- Load Balancing or no Load Balancing (choices)..in here my choice is no Load Balancing
- Application Server*
- System No*
- Logon Language*
- Logon Client*
- Authentication Mode (Use Log-on Data for SAP System or Secure Network Connection for RFC)
if Use Log-on Data for SAP System it includes:
- Logon User*
- Logon Password*
If Secure Network Connection for RFC it includes:
- Quality of Protection
- SNC Partner Name
Looked onto your blogs mentioned several times, but no information on RFC Metadata Repository Parameters. -
SAP IGS: JCO.Server could not find server function 'PIGFARMDATA'
dEAR ALL,
Operating System: aix6.0
Database: Oracle 11g
IGS is not getting started.
SM59--IGS_RFC_DEST--CONNECTION TEST is fine
sigs-- IGS_RFC_DEST-- Error is generating " JCO.Server could not find server function 'PIGFARMDATA' ".
Tried starting IGS USING the below command:
/usr/sap/KBQ/DVEBMGS01/exe/igswd_mt -mode=profile pf=/usr/sap/KBQ/SYS/profile/KBL_DVEBMGS01_<Hostname>
Startup using profile
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 1/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40180) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40100) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40101) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40102) [nixxi.cpp 3735]
kbqadm> sapcontrol -nr 01 -function GetProcessList
22.07.2014 16:36:48
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
msg_server, MessageServer, GREEN, Running, 2014 07 22 16:33:57, 0:02:51, 8847548
disp+work, Dispatcher, GREEN Running, Message Server connection ok, Dialog Queue time: 0.00 sec, AS Java: ALL processes running, 2014 07 22 16:33:57, 0:02:51, 12976352
rslgcoll, Central Syslog Collector, GREEN, Running, 2014 07 22 16:33:58, 0:02:50, 9175214
rslgsend, Central Syslog Sender, GREEN, Running, 2014 07 22 16:33:58, 0:02:50, 8585278
DVEBMGS01\exe\ig.sapKBQ_DVEBMGS01, , GRAY, Stopped, , , 13566036
ps -ef | grep igs--all igs process are running
HTTP://<HOSTNAME>:40180---sap igs IS RUNNING
IGS Logs: ( /usr/sap/KBQ/DVEBMGS01/igs/log)
trace File pw_sapbwqa_1.trc
[Portwatcher::Ping] Ping was unsuccessful 3 times
[Portwatcher::Ping] Reconnect Portwatcher
Tue Jul 22 16:54:11 2014
[Portwatcher::Ping] Ping was unsuccessful 1 times
Tue Jul 22 16:54:41 2014
[Portwatcher::Ping] Ping was unsuccessful 2 times
igs vERSION IS Internet Graphics Service 7200.0.7.0
"mux_sapbwqa.trc---tRACE File
Tue Jul 22 16:29:13 2014
*** ERROR => [ListenerRfc::Loop] RfcListenAndDispatch() (IGS.KBQ sapbwqa sapgw01) returned error: RFC_INVALID_HANDLE [listenerrfc_ 1039]
*** ERROR => [ListenerRfc::OpenRfc] RfcRegisterServer() returned RFC_COMMUNICATION_FAILURE /
ERROR partner 'sapbwqa:sapgw01' not reached
TIME Tue Jul 22 16:29:13 2014
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -10
MODULE nixxi.cpp
LINE 2896
DETAIL NiPConnect: 10.10.90.150:3301
SYSTEM CALL connect
ERRNO 79
ERRNO TEXT Connection refused
COUNTER 18
[listenerrfc_ 948]
*** ERROR => [ListenerRfc::Loop] OpenRfc() (IGS.KBQ sapbwqa sapgw01) returned RFC_COMMUNICATION_FAILURE
Still trying... [listenerrfc_ 1007]
Tue Jul 22 16:30:13 2014
*** ERROR => [ListenerRfc::Loop] RfcListenAndDispatch() (IGS.KBQ sapbwqa sapgw01) returned error: RFC_INVALID_HANDLE [listenerrfc_ 1039]
trc file: "mux_sapbwqa.trc", trc level: 1, release: "720"
Tue Jul 22 16:39:40 2014
[IgsMux::Initialize] Internet Graphics Service 7200.0.7.1
[IgsMux::Initialize] Platform: IBM RS/6000 with AIX (rs6000_64)
[ListenerRfc::ListenerRfc] Constructed for R/3 NA
[ListenerHttp::ListenerHttp] Constructed for port 40180
*** ERROR => [ListenerHttp::Loop] NiListen on port 40180 failed [listenerhttp 703]
[ListenerHttp::~ListenerHttp] Destroyed for port 40180
[Multiplexer::StartUp]
*** ERROR => [ServerTcpIp::NiServerLoop] Caught a NetError: [NetError] [NiBufListen failed] [ServerTcpIp::NiServerLoop()] [-4]. [servertcpip_ 254]
can you please tel the reason why the IGS is not working
Regards
gayathri.KHi Gayathri,
Startup using profile
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 1/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40180) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40100) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40101) [nixxi.cpp 3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
(SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40102) [nixxi.cpp 3735]
Just check the process which is using the port
netstat -tupan|grep 40180
With Regards
Ashutosh -
Error RFC sender scenario :JCO.Server could not find server function
Hi ,
The scenario which am working is as follows:
I already have a report in R/3 that calls a Bapi which is in CRM system, now I want to make this point-point connection through XI(RFC sender-XI-RFC Reciever) with out changing the report (only changing the RFC destination).
I have imported the bapi from CRM to XI , changed the rfc destination(to tcp/ip) that existed in R/3 to point to XI(test connection is working fine) and also created the RFC sender adapter .
Now on executing the report am getting the following error.
JCO.Server could not find server function
Please, let me know where I went wrong.
Should the function module exists on the XI server. If the functional module is not there then I am getting the error if the function module is there in XI then every thing is working fine.Hi Michal ,
Now my scenario is working . The error <b>"JCO.Server counld not find server function"</b> got fixed by giving the system details that contain the RFC in the adapter metadata parameters in the channel configuration.
Thanks & Regards,
Srikanth. -
JCO.Server could not find server function "ZVERIFY_FILE"
Hi Experts,
I am facing one problem, i have created on TCP/IP connection with connection type T and given it some Program Id.
I have register this Program id On SRM server.
Now from this server i want to call one JAVA file, for that purpose i have installed JCO on the server.
My server file looks like,
import com.sap.mw.jco.*;
//import com.tcs.jns.JSignNS;
//import com.tcs.jns.JSignNSException;
//import com.tcs.jns.CertDetails;
// added by paresh on 16.1.2009
import java.io.FileOutputStream;
import com.tcs.jie.jverify.JVerify;
import com.tcs.jie.jsign.JSign;
public class ds_listener extends JCO.Server {
Create an instance of my own server
@param gwhost (gateway host)
@param gwserv (gateway service number)
@param progid (program id)
@param repository (repository used by the server to lookup the definitions of an inc)
public ds_listener(String gwhost, String gwserv, String progid, boolean isUnicode, IRepository repository) {
super("sapdev14", "sapgw01", "DS_RFC", repository); this.setProperty("jco.server.unicode", isUnicode?"1":"0");
/** Overrides the default method. */
static ds_listener serverConnections[] = new ds_listener[1];
protected void handleRequest(JCO.Function function) {
JCO.ParameterList input = function.getImportParameterList();
JCO.ParameterList output = function.getExportParameterList();
if (function.getName().equals("ZVERIFY_DATA")) {
try{
JVerify JNS = new JVerify();
String dbPath = "/home/admin/FormSigner_23Apr/FormSigner_Release/certdbs";
//boolean res = JNS.init (dbPath); // commented by paresh on 16.1.2009 as its obsolute
//initialize method has to be called before calling any other method of the API
String recdSignature = input.getString("SIGNATURE");
boolean ret_update = JNS.updateSignature(recdSignature.getByetes());
if (ret_update){
int count = JNS.getSignerCount();
boolean ret_verify_sign = false;
while(count > 0){
ret_verify_sign = JNS.verifySignature(count - 1);
if (ret_verify_sign){
ret_verify_sign = false;
count = count - 1;
}else
break;
if (count == 0){
String decoded_data = new String(JNS.getDecodedData());
output.setValue("X", "STATUS");
output.setValue(decoded_data, "DATA");
}else{
output.setValue(" ", "STATUS");
output.setValue("Error in Signature Verification. Please check Certificate Validity of every signer.", "DATA");
}catch (Exception e1){
output.setValue(" ", "STATUS");
output.setValue(e1.getMessage(), "DATA");
}else if(function.getName().equals("ZVERIFY_FILE")) {
try{
JVerify JNS = new JVerify();
String dbPath = "/home/admin/FormSigner_23Apr/FormSigner_Release/certdbs";
//boolean res = JNS.init (dbPath); // commented by paresh on 16.1.2009 as its obsolute
//initialize method has to be called before calling any other method of the API
String recdSignature = input.getString("SIGNATURE");
boolean ret_update = JNS.updateSignature(recdSignature.getBytes());
if (ret_update){
int count = JNS.getSignerCount();
boolean ret_verify_sign = false;
while(count > 0){
ret_verify_sign = JNS.verifySignature(count - 1);
if (ret_verify_sign){
ret_verify_sign = false;
count = count - 1;
}else
break;
if (count == 0){
output.setValue("X", "STATUS");
}else{
output.setValue(" ", "STATUS");
}catch (Exception e1){
output.setValue(" ", "STATUS");
}else{
return ;
Start the server
public static void startServers() {
JCO.addClientPool("POOL",3,"200","sisldp","paresh1234","EN","sapdev14","01");
IRepository repository = JCO.createRepository("REP", "POOL");
for (int i = 0; i < serverConnections.length; i++) {
// Server listens for incoming requests from system 1
// (Change gateway host, service, and program ID according to your needs)
serverConnections<i> = new ds_listener(
"sapdev14",//gateway host, often the same as host
"sapgw01", //gateway service, generally sapgw+<SYSNR>
"DS_RFC", // corresponds to program ID defined in SM59
true, // or false for non unicode listener
repository);
serverConnections<i>.start();
public static void main(String[] args) {
startServers();
The file have no error as i have compiled it on server, its listener file given in JCO with some modification.
I have tested the connection from SM59 it's working fine,but when i call my any of the 2 function(ZVERIFY_DATA & ZVERIFY_FILE) defined in my java file then i am getting an error "JCO.Server could not find server function 'ZVERIFY_FILE'" on SRM screen.
Can anyone tell me what can be the reason????
please help, i am in real trouble.Hi,
This is may be of the wrong FunctionModule name means check in case also,it may be case sensitive.
And check whether it is remotely enabled or not and check the RFC destination.
For more details refer these threads.
JCO.Server could not find server function 'SET_SLD_DATA'
JCO.Server could not find server function
Problems with sender RFC
Thanks. -
JCO.SERVER COULD NO FIND THE FINCTION" Z....."
Hi all,
I am Getting the Above error in the SM58 when i excute the Report under which I am calling th eFunction Module.
Please brief me this procedure.
Thanks,
SrinivasHello Phani,
Check this Note :
Note 938175 - JCO.Server could not find server function 'xxxx'
Symptom
ABAP runtime error with the following message: "JCO.Server could not find server function 'xxxx'".
'xxxx' being a RFC function module.
Other terms
eBridge, RFC
Reason and Prerequisites
The RFC repository of the eBridge is not up-to-date and does not contain the requested RFC function module.
Solution
Shut down and restart the eBridge, it will download the latest version of the RFC repository from the Amadeus Gateway.
regards
Prasad -
Setup problem - sql server 2014 - "could not find the database engine startup handle" - 0x851a0019
I tried to install ,deleted and re-installed several times and no help at all.
visual studio 2013 with update 2 rc and adk installed in my computer.
error code: 0x851a0019
error messege in setup: could not find the database engine startup handle
edition: Microsoft SQL Server 2014 Enterprise (Evaluation)
logs:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 13:53:29
End time: 2014-04-03 14:47:48
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: ARIELUBA-PC
Machine processor count: 8
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS Database Engine Services 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 SQLEXPRESS MSSQL11.SQLEXPRESS SQL Server Replication 1033
Express Edition 11.1.3128.0 No Yes
SQL Server 2012 ADK MSSQL11.ADK Database Engine Services
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 ADK MSSQL11.ADK SQL Server Replication
1033 Express Edition 11.0.2100.60 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3412.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Arie Luba\Downloads\WS2012R2DC\SQLServer2014-x64-ENU\x64\setup\
Installation edition: Evaluation
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Hebrew_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME:
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: ARIELUBA-PC\Arie Luba
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, MDS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Hebrew_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: ARIELUBA-PC\Arie Luba
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_135327\SystemConfigurationCheck_Report.htm
2014-04-03 14:14:28.01 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Enterprise Evaluation Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
2014-04-03 14:14:28.01 Server UTC adjustment: 3:00
2014-04-03 14:14:28.01 Server (c) Microsoft Corporation.
2014-04-03 14:14:28.01 Server All rights reserved.
2014-04-03 14:14:28.01 Server Server process ID is 7148.
2014-04-03 14:14:28.01 Server System Manufacturer: 'Dell Inc.', System Model: 'Inspiron N5110'.
2014-04-03 14:14:28.01 Server Authentication mode is WINDOWS-ONLY.
2014-04-03 14:14:28.01 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2014-04-03 14:14:28.01 Server The service account is 'NT Service\MSSQLSERVER'. This is an informational message; no user action is required.
2014-04-03 14:14:28.01 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
2014-04-03 14:14:28.01 Server Command Line Startup Parameters:
-s "MSSQLSERVER"
-m "SqlSetup"
-Q
-q "Hebrew_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-03 14:14:28.28 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-03 14:14:28.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-03 14:14:28.28 Server Detected 8099 MB of RAM. This is an informational message; no user action is required.
2014-04-03 14:14:28.28 Server Using conventional memory in the memory manager.
2014-04-03 14:14:28.31 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
2014-04-03 14:14:28.34 Server Perfmon counters for resource governor pools and groups failed to initialize and are disabled.
2014-04-03 14:14:28.36 Server Query Store settings initialized with enabled = 1,
2014-04-03 14:14:28.36 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-03 14:14:28.36 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-03 14:14:28.38 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-03 14:14:28.39 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-03 14:14:28.39 spid8s Warning ******************
2014-04-03 14:14:28.39 spid8s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-03 14:14:28.40 spid8s Starting up database 'master'.
2014-04-03 14:14:28.42 Server Software Usage Metrics is disabled.
2014-04-03 14:14:28.48 Server CLR version v4.0.30319 loaded.
2014-04-03 14:14:28.56 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-03 14:14:28.62 spid8s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.63 spid8s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-03 14:14:28.64 spid8s SQL Trace ID 1 was started by login "sa".
2014-04-03 14:14:28.64 spid8s Server name is 'ARIELUBA-PC'. This is an informational message only. No user action is required.
2014-04-03 14:14:28.65 spid16s Password policy update was successful.
2014-04-03 14:14:28.66 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-04-03 14:14:28.66 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-03 14:14:28.66 spid16s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-03 14:14:28.66 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-03 14:14:28.66 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-03 14:14:28.67 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-03 14:14:28.67 spid16s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
________________________________________________________________________________________________Is it okay? (see below)
;SQL Server 2014 Configuration File
[OPTIONS]
; Specifies a Setup work flow, like INSTALL, UNINSTALL, or UPGRADE. This is a required parameter.
ACTION="Install"
; Detailed help for command line argument ROLE has not been defined yet.
ROLE="AllFeatures_WithDefaults"
; Use the /ENU parameter to install the English version of SQL Server on your localized Windows operating system.
ENU="True"
; Parameter that controls the user interface behavior. Valid values are Normal for the full UI,AutoAdvance for a simplied UI, and EnableUIOnServerCore for bypassing Server Core setup GUI block.
UIMODE="Normal"
; Setup will not display any user interface.
QUIET="False"
; Setup will display progress only, without any user interaction.
QUIETSIMPLE="False"
; Specify whether SQL Server Setup should discover and include product updates. The valid values are True and False or 1 and 0. By default SQL Server Setup will include updates that are found.
UpdateEnabled="True"
; Specify if errors can be reported to Microsoft to improve future SQL Server releases. Specify 1 or True to enable and 0 or False to disable this feature.
ERRORREPORTING="False"
; If this parameter is provided, then this computer will use Microsoft Update to check for updates.
USEMICROSOFTUPDATE="False"
; Specifies features to install, uninstall, or upgrade. The list of top-level features include SQL, AS, RS, IS, MDS, and Tools. The SQL feature will install the Database Engine, Replication, Full-Text, and Data Quality Services (DQS) server. The Tools feature
will install Management Tools, Books online components, SQL Server Data Tools, and other shared components.
FEATURES=SQLENGINE,REPLICATION,FULLTEXT,DQ,AS,RS,RS_SHP,RS_SHPWFE,DQC,CONN,IS,BC,SDK,BOL,SSMS,ADV_SSMS,DREPLAY_CTLR,DREPLAY_CLT,MDS
; Specify the location where SQL Server Setup will obtain product updates. The valid values are "MU" to search Microsoft Update, a valid folder path, a relative path such as .\MyUpdates or a UNC share. By default SQL Server Setup will search Microsoft Update
or a Windows Update service through the Window Server Update Services.
UpdateSource="MU"
; Displays the command line parameters usage
HELP="False"
; Specifies that the detailed Setup log should be piped to the console.
INDICATEPROGRESS="False"
; Specifies that Setup should install into WOW64. This command line argument is not supported on an IA64 or a 32-bit system.
X86="False"
; Specify the root installation directory for shared components. This directory remains unchanged after shared components are already installed.
INSTALLSHAREDDIR="C:\Program Files\Microsoft SQL Server"
; Specify the root installation directory for the WOW64 shared components. This directory remains unchanged after WOW64 shared components are already installed.
INSTALLSHAREDWOWDIR="C:\Program Files (x86)\Microsoft SQL Server"
; Specify a default or named instance. MSSQLSERVER is the default instance for non-Express editions and SQLExpress for Express editions. This parameter is required when installing the SQL Server Database Engine (SQL), Analysis Services (AS), or Reporting Services
(RS).
INSTANCENAME="MSSQLSERVER"
; Specify that SQL Server feature usage data can be collected and sent to Microsoft. Specify 1 or True to enable and 0 or False to disable this feature.
SQMREPORTING="False"
; Specify the Instance ID for the SQL Server features you have specified. SQL Server directory structure, registry structure, and service names will incorporate the instance ID of the SQL Server instance.
INSTANCEID="MSSQLSERVER"
; The computer name that the client communicates with for the Distributed Replay Controller service.
CLTCTLRNAME="SQLDRC"
; The Windows account(s) used to grant permission to the Distributed Replay Controller service.
CTLRUSERS="ARIELUBA-PC\Arie Luba"
; The account used by the Distributed Replay Controller service.
CTLRSVCACCOUNT="NT Service\SQL Server Distributed Replay Controller"
; The startup type for the Distributed Replay Controller service.
CTLRSTARTUPTYPE="Manual"
; The account used by the Distributed Replay Client service.
CLTSVCACCOUNT="NT Service\SQL Server Distributed Replay Client"
; The startup type for the Distributed Replay Client service.
CLTSTARTUPTYPE="Manual"
; The result directory for the Distributed Replay Client service.
CLTRESULTDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir"
; The working directory for the Distributed Replay Client service.
CLTWORKINGDIR="C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir"
; RSInputSettings_RSInstallMode_Description
RSINSTALLMODE="DefaultNativeMode"
; RSInputSettings_RSInstallMode_Description
RSSHPINSTALLMODE="SharePointFilesOnlyMode"
; Specify the installation directory.
INSTANCEDIR="C:\Program Files\Microsoft SQL Server"
; Agent account name
AGTSVCACCOUNT="NT Service\SQLSERVERAGENT"
; Auto-start service after installation.
AGTSVCSTARTUPTYPE="Manual"
; Startup type for Integration Services.
ISSVCSTARTUPTYPE="Automatic"
; Account for Integration Services: Domain\User or system account.
ISSVCACCOUNT="NT Service\MsDtsServer120"
; The name of the account that the Analysis Services service runs under.
ASSVCACCOUNT="NT Service\MSSQLServerOLAPService"
; Controls the service startup type setting after the service has been created.
ASSVCSTARTUPTYPE="Automatic"
; The collation to be used by Analysis Services.
ASCOLLATION="Hebrew_CI_AS"
; The location for the Analysis Services data files.
ASDATADIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Data"
; The location for the Analysis Services log files.
ASLOGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Log"
; The location for the Analysis Services backup files.
ASBACKUPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Backup"
; The location for the Analysis Services temporary files.
ASTEMPDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Temp"
; The location for the Analysis Services configuration files.
ASCONFIGDIR="C:\Program Files\Microsoft SQL Server\MSAS12.MSSQLSERVER\OLAP\Config"
; Specifies whether or not the MSOLAP provider is allowed to run in process.
ASPROVIDERMSOLAP="1"
; Specifies the list of administrator accounts that need to be provisioned.
ASSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Specifies the server mode of the Analysis Services instance. Valid values are MULTIDIMENSIONAL and TABULAR. The default value is MULTIDIMENSIONAL.
ASSERVERMODE="MULTIDIMENSIONAL"
; CM brick TCP communication port
COMMFABRICPORT="0"
; How matrix will use private networks
COMMFABRICNETWORKLEVEL="0"
; How inter brick communication will be protected
COMMFABRICENCRYPTION="0"
; TCP port used by the CM brick
MATRIXCMBRICKCOMMPORT="0"
; Startup type for the SQL Server service.
SQLSVCSTARTUPTYPE="Automatic"
; Level to enable FILESTREAM feature at (0, 1, 2 or 3).
FILESTREAMLEVEL="0"
; Set to "1" to enable RANU for SQL Server Express.
ENABLERANU="False"
; Specifies a Windows collation or an SQL collation to use for the Database Engine.
SQLCOLLATION="Hebrew_CI_AS"
; Account for SQL Server service: Domain\User or system account.
SQLSVCACCOUNT="NT Service\MSSQLSERVER"
; Windows account(s) to provision as SQL Server system administrators.
SQLSYSADMINACCOUNTS="ARIELUBA-PC\Arie Luba"
; Provision current user as a Database Engine system administrator for %SQL_PRODUCT_SHORT_NAME% Express.
ADDCURRENTUSERASSQLADMIN="True"
; Specify 0 to disable or 1 to enable the TCP/IP protocol.
TCPENABLED="1"
; Specify 0 to disable or 1 to enable the Named Pipes protocol.
NPENABLED="0"
; Startup type for Browser Service.
BROWSERSVCSTARTUPTYPE="Automatic"
; Specifies which account the report server NT service should execute under. When omitted or when the value is empty string, the default built-in account for the current operating system.
; The username part of RSSVCACCOUNT is a maximum of 20 characters long and
; The domain part of RSSVCACCOUNT is a maximum of 254 characters long.
RSSVCACCOUNT="NT Service\ReportServer"
; Specifies how the startup mode of the report server NT service. When
; Manual - Service startup is manual mode (default).
; Automatic - Service startup is automatic mode.
; Disabled - Service is disabled
RSSVCSTARTUPTYPE="Automatic"
; Add description of input argument FTSVCACCOUNT
FTSVCACCOUNT="NT Service\MSSQLFDLauncher" -
Belkin wireless router connected but browser could not find the host server
my new roommate has a belkin n wireless router connected to a cable modem which functions perfectly on her pc laptop. i am trying to connect my MacBook Pro to the router using her WEP password. this all works fine and my System Preferences/Network/Status shows that AirPort is connected with full strength, but i cannot load any web pages (i have not yet been able to load any pages at all using this router). the page load error reads "Firefox can't find the server at www.cnn.com" and "The browser could not find the host server for the provided address".
I spoke with Belkin support and they say the router is functioning properly, that is a problem with my mac.
When I go to Network Diagnostics, the status shows all green and says "This computer's Internet connection appears to be operating normally. Are you sure you want to use Network Diagnostics?
Could this be a firewall issue? A couple people have suggested that, but I'm not sure how to fix that.
I have tried rebooting the router and cable modem, rebooting the mac, etc.
any ideas on what settings i may need to investigate??
thank you!
Message was edited by: photoeyeseattlephotoeyeseattle wrote:
how do I know if the router has useful DNS servers? i am looking at the settings of the router on the pc that is online.
Somewhere in the settings of the router should be the DNS servers that it is using. Since the router is offering via DHCP to do DNS translation for your Mac, it must have useful DNS servers listed.
There are "public" DNS servers. I have no experience with it, but this Web page describes one from Google:
http://code.google.com/speed/public-dns/
Supposedly Google has a DNS server at IP addresses 8.8.8.8 and 8.8.4.4 that you might try. Since the DNS server setting on your Mac is grayed out, as a test you might try noting the setting in the "TCP/IP" tab of your AirPort connection item of the Network panel of System Preferences. Then switch from "Using DHCP" to "Manually", fill in the values you just noted, switch to the DNS tab and fill in Google's DNS addresses, and see if things work better.
do you have any other suggestions of where to seek help???
Perhaps a Belkin discussion group? -
SQL Server Express 2014 on Win8.1: Could not find the Database Engine startup handle
Hello,
I tried to follow all the similarly titled posts in this forum, yet no solution seems to work, so I hope I can find some up-to-date suggestion here (most of the older posts refer to versions from 2008 to 2012...).
I have installed Visual Studio 2013 (with the latest Update 2 RC) on a freshly installed development workstation with Win 8.1 with all its updates. Now I'd want to install SQL Server 2014 Express, but the setup keeps failing with the dreaded "Could
not find the Database Engine startup handle" error (the log follows below).
What I tried:
1) download again and repair. Same error.
2) completely uninstall by launching setup.exe /Action=uninstall (success), then rebooting the OS, then installing again. Same error. I did this twice, the second time I also manually removed any directory left out in C:\Program Files etc.
When I launch the setup, I select all the components for installation in the package SQLEXPRADV_x64_ENU.exe (1.12 GB, last downloaded today -Apr 3, 2014-), and accept all the defaults including the proposed services accounts. There is no preexisting
SQL Server instance, as expected.
The setup takes its time, and finally fails with the error quoted above. I really do not want to reformat my HD and fully reconfigure my workstation, which took about 3 days... Could anyone suggest a solution to have SQL Server 2014 setup so I can start
developing instead of wasting time in administering the system?
Thanks to all! The log follows.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2014-04-03 18:30:58
End time: 2014-04-03 19:04:41
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: DIOMEDES
Machine processor count: 4
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Users\Daniele\Downloads\SQLEXPRADV_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, CONN, BC, SDK, BOL, SSMS, ADV_SSMS, LOCALDB
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQLEXPRESS
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SQLEXPRESS
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: DIOMEDES\Daniele
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4025
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140403_183057\SystemConfigurationCheck_Report.htmThank you, it worked! I suppose that it was really your nr.3 which made the difference. I changed NT Service\MSSQL$SQLEXPRESS to NT AUTHORITY\System for the Data service. I'll then change it again as suggested (any suggestion about a "standard"
account to be used here?), even if this is a development workstation using SQL Server Express only as a local database for debugging, so security is not really a big concern.
Thanks for the feedback.Ya I know No3 was real step but just added more info so as to rule out any other possibility.
No not as such, you wont believe,quite few pf my clients I have worked for keep it with local system and they have not complained yet ,they are afraid to change account as few of them faced issue SQL Server not coming online due to logon failure( after changing
startup account to some domain a and that was happening due to some AD policy.But if you have nay plans to move Critical database in production which would be act as Database to some Internet facing application please follow my suggestion
of running SQL Server with Least privileged domain account.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
FrancescoWell, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana -
I am constantly told by Itunes that 107 items are not synching from my Ipod Touch to/from Outlook Contacts. I try to resolve the issue and eventually a message pops up saying it could not be completed because it could not find the sync server. This started after one of the updates a couple of months ago. If anyone has found a similar problem and resolved it I would appreciate any assistance.
ThanksTry here:
Advanced troubleshooting for Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
Sync Services: Advanced troubleshooting for contact and calendar syncing -
Server could not find any Meta-Data devices!
Our MDC dropped out and the backups did not engage.
On a reboot of the MDC we were able to mount the volume, but all files (QuickTme movies, FCP projct files) could not be opened with an "unknown file type error".
We shut all the clients down we checked the volume and (cvfsck -nv) and while "dirty" it did not report any errors.
Stopped the volume and ran a cvfsck -w which gave us:
"Server could not find any Meta-Data devices!"
Checking Xsan admin logs shows us:
"PioOpen: no such device.
Fatal: Cannot open stripe group "md" - Operation not supported by device
Fatal: Physio_init failed."
Where "md" is our metadata storage pool.
We shutdown all switches, RAIDS, clients, etc, but bring them all back up and checking with one MDC or another is the same result. Volume will not mount.
All fiber connections seem good, checked in RAID admin and on switch.
Ideas?AppleCare suggested that maybe a metadata backup could have helped.
http://docs.info.apple.com/article.html?artnum=303371
In any case, we nuked and paved. -
OK, something seemed to have changed with my system because this error is NEW. It might be related to my system upgrade from Vista to Win7, but just guessing here.
I run a database on a corporate MS Sql Server (2005) and an ASP application that connects via ODBC. The real world application works fine, however when I attempt to access Stored Procedures from Dreamweaver (on my development machine) I am getting the following error:
[Microsoft][ODBC SQL Server Driver][SQL Server]Could not find stored procedure 'dbo.sp_SPNAMEHERE'.
This only seems to happen on Stored procedures that RETURN a recordset.
system:
Win7
Dreamweaver CS4
Code: VBScript/Classic ASP
SQL Server 2005
Connecting via ODBC: MM_MY_STRING = "Driver={SQL Server};Server=wscxxxxxxxxx;Database=dbsystem;Uid=username;Pwd=XXXXXXXXXXXX"
Stored procedures that do not return a recordset are not an issue.... this has put my development work at a standstill!!
Thanks in advance!Well, I hate bumps, but I am really running out of solutions. I have now tried to use a system DSN on my development machine and that didnt solve the problem. I just un-installed DW and re-installed it and that didnt solve my problem either.
This is very frustrating, because I cannot use any stored procs that return recordsets... I am stuck... can anybody think of a relatively easy work-around to working in DW w/ recordsets that come from SPs when you cant actually access them?
The really weird thing is, when I build the command, and choose the stored proc, and give it valid input variables, and TEST it from the TEST button, everything works and data is returned as expected. Once I click "OK" and actually add it to the ASP page the recordset that should be visible isnt... and when I click the plus sign in the bindings window I get the error...
Help!!
Maybe you are looking for
-
How to invoke a Pop up window on screens.
-
Importing excel documents into Numbers problem
When I try to open .xls files in Numbers, I often get the message that the file is to large to translate. Is there a solution to this? I don't want to buy Microsoft Office! Message was edited by: downtoearth
-
Some may have noticed that there are a number of threads now dealing with essentially the same issue of problematic connectivity using Airport on Leopard. Lots of different platforms, lots of different attempts at a work-arounds... and not much luck.
-
How to Set File Handling on LIghtroom CC??
I was watching a you tube on Lightroom CC and the person is using a mac - I am on WIndows. The insructor selected the words "lightroom" to the left of "File" to get to catalogue settins. I don't see that option so that I can set file handling etc f
-
Loss of cues marks when saving WAV files in Acrobat 1.5
I have been using Audition 1.5 for several years, but today I have been experiencing a new and fundamental problem. After downloading an MP3 file and converting it to a Windows PCM WAV file using Audition, I have inserted cue (track) marks. When I s