Server response: "Error uploading file *-sprite.png. There was no respone from the server....."

Hi, I am experiencing a publish upload problem from Muse.
Upload to publish starts and continues until I reach uploading images 1-431.
After a few moments the following error is dashboarded:
>> Error uploading file u19121-sprite.png. There was no response from the server. Check your network connection, and try again. If this problem persists, try again later. <<
Server connections my side are fast and OK
Please advise.
Would I be correct that the receiving server at Business Catalyst is just busy? I notice it does start to continue uploading, however it does come up with similar errors further along the image count upload.
Message was edited by: EssexmanRSA

Under Business Catalyst, server... found response >> server modifications... June 5th evening.
So looks like problem all round while we wait til sorted.

Similar Messages

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

This message was not downloaded from the server

I have purchased a iphone the first week they were introduced. My problem is with pop email. I keep getting the message " this message has not been downloaded from the server" when I open a email with a lot of html graphics. After reloading the email many times I am able to get the email. Sometimes it takes only 2 times but sometimes it take 20 times. This has been happening since the first day I got the iphone. I thought it was because of a slow connection but it also happens on wifi. I thought apple would fix this problem eventually. But I don't think that is going to happen anytime soon. I have seen this problem being reported on this forum and is apparently quite widespread. I have also reported to apple in there feedback section. No response yet. There is a work around to forward pop email account to an imap account. I don't consider this a solution. Does anyone have any other solutions?

(1) Why does it happen?
The short answer is "I am not 100% sure why, and Apple have not said why!", but all I can really do now is to google it, and make up my own mind!
My Guess: I don't think that the Mail application on the iPhone actually saves any attachments on the iPhone when you download emails! It saves the body of the email, but NOT the attachments.
Why? Because if you attempt to browse an older email, which has an attachment, it gives you the message "Loading..." and after a couple of seconds it tells you "This message has not been downloaded from the server". BUT: If you attempt to do the same thing, with WiFi & EDGE turned OFF, then the Mail application will display the email body immediately, and give you a link to the attachments, that you can click on to download.
Basically it proves that the iPhone does not save attachments on the iPhone, only the email body!
(2) Can you fix this?
Well, this normally happens when you collect your email on your iPhone using the POP protocol!
Most of us download our email onto computers and select the option in Outlook/Outlook Express to "leave the email on the server for x days", typically 5 or 10 (which I do) days. We then setup our iPhones to download the same email, but to LEAVE it on the server - or "Delete from server: Never".
This means that for 10 days your iPhone will be able to access a specific email on the email server, and will be able to download (view) that attachment whenever you want.
BUT: AFTER this 10 day period your computer will remove that specific email from the mail server, and then your iPhone will not be able to retrieve it from the server. Which also means that you will not be able to read any attachments from the mail server.
SO, when your iPhone Mail app tries to download THAT attachment, it will not be able to, and INSTEAD of just displaying the email body, and the attachment link, it displays the error message: "This message has not been downloaded from the server"...
(3) Why does the iPhone NOT just save the attachment on the iPhone?
I have NO idea! Apple should definitely speak out about this and come up with a fix!
(4) Why Apple does NOT save the attachment? (My guess)
Well, if you are constantly re-downloading any attachment that you attempt to view on your iPhone, then you will constantly be downloading data using your EDGE package! AND your Mobile Service Provider CHARGES you a massive rate (per MB) to download data using EDGE! Which means that they (AT&T / MTN / Orange / whatever) are making loads of cash off you re-downloading your email attachments. Is this right?
(5) Quick Fix?
Change the settings on your computer so that it leaves the email on the server for an extended period of time! Change the 3 days, or 10 days to something like 30 days! This means that your iPhone will be able to re-download the attachment for a 30 day period after it has initially downloaded the email.
BUT you are STILL re-downloading the attachment, and while you are waiting, YES, WAITING.... you are still being charged for the data traffic!
The problem here is that some service providers only give you a 10MB email account on their server. This might not be enough for users who receive 100's of emails on a weekly basis!
(6) Longer Fix?
Change your email account from a POP account to an IMAP account.
Problem #1: Here again is that not all service providers offer IMAP facilities! Also, the emails would reside on your server.
Problem #2: You are still re-downloading all those attachments again! $$$
(7) The REAL solution?
The real solution needs to come from Apple! They need to increase the size of the first partition on the iPhone that you save your emails in. Maybe they need to save attachments in the second (media) partition so that you can always access them? At the moment the first partition on the iPhone is really small, just big enough for the OS and a few applications, never mind 100's of attached pictures and mp3s, etc that we commonly send around cyberspace!

FRM-92101 there was a failure in form server during startup

we are using R12, All the instance started successfully, but when i get in to the form server in application side the error comes like FRM-92101 there was a failure in form server during startup. this could happen due to invalid configuration. please look into web server log for details ,
it comes for all the three instances in this particular server , so what is the problem , and where is the web log server present ,
please give solutions ,
Thanks
Edited by: user12235518 on Mar 3, 2012 11:54 PM

12/03/06 05:24:57.339 formsweb: Forms session <3> aborted: runtime process failed during startup with errors /R12/d01/oracle/R12I/apps/tech_st/10.1.2/bin/frmweb: error
while loading shared libraries: libXm.so.2: cannot open shared object file: No such file or directory
12/03/06 05:24:57.339 formsweb: Forms session <3> exception stack trace:
oracle.forms.engine.RunformException: Forms session <3> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
This error s coming for both new instance and cloned instance
Edited by: user12235518 on Mar 6, 2012 4:17 AM

Error message: There was an error processing a page. There was a problem reading this document (110)

I opened a pdf document in Adobe Reader X. When I attempted to scroll through the pages the following error message appeared, “There was an error processing a page. There was a problem reading the document (110). After an Internet search to try to find the reason for the error and a solution, I came across a site that suggested it was an issue regarding the fonts of the document. I then reopened the document and went into the document’s font properties (FILE – PROPERTIES – FONTS tab). There I noticed that the “Gathering font information” stopped at 2% which, of course, I took to mean that Adobe Reader X was having a difficult time in loading the font’s information. Another site suggested opening the document in the pdf reader, Foxit. So I did, and the document loaded properly with no error messages. I was still curious as to why the document did not load entirely in Adobe Reader X and if the same problem would occur using a different reader. I then downloaded the pdf reader, Nitro Reader 2. I opened the same document and initially received the following message, “The requested page number is invalid and does not exist in this document.” I closed the message and proceeded to scroll through the document. As I scrolled, the following message appeared, “This file was damaged (corrupted) and has been repaired.” I thought, “Wonderful!” I then chose <FILE – SAVE AS – PDF DOCUMENT> and saved the “repaired” document under a new name. When I opened the “repaired” document with Adobe Reader X, behold, the document opened entirely with no error message. I was curious, so I went into the document’s font properties and noticed, this time around, that the “Gathering font information” loaded to 100%. Nitro Reader 2 detected the error and fixed it. Now I’m left to wonder…why wasn’t Adobe Reader X able to do the same? I hope this post helps others who are experiencing the same issue.

When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice.

Word2007 in windows 7 -There was a problem sending the command to the program!

I just bought my new HP laptop with windows 7 Home premier edition, and then I installed windows office 2007 suite. It's ok if I only open the word without any existing word file. But if I open word with a word file, it says " there was a problem sending
the command to the program". I try this action under safe mode, it's no problem, I can open an existing word file. If I open the winword.exe and use menu "file-open" to open a word file, it's alright. But If I double click a word file, it shows that error.
I tried to change the registry information according to the solution on internet, but it doesn't work. I checked the compatibility mode, it says run in "windows XP sp3", and it is grey, I can't uncheck it.
Anyone got any idea to fix this problem?
Thanks a lot.

Hi
Thank you for using
Microsoft Office for IT Professionals Forums.
From your description, This sounds like a problem with the file associations in Windows.. If there is any misunderstanding, please feel free to let
me know.
The first thing to check is to make sure that the file extensions are correctly associated with Word.
1.
Click Start > type or copy following command to the Search box
"C:\Program Files\Microsoft Office\Office12\winword.exe" /unregserver
2.
You should then, immediately, use the following command:
"C:\Program Files\Microsoft Office\Office12\winword.exe" /regserver
Re-associate the Word file manually:
Please go to
Start \Control Panel\Programs\Default Programs\Set Associations.
Locate the files .doc, .docm,.docx, .dot, .dotm, check if there are associated with
Microsoft Word. If not, highlight the file and click the
Change Program button. Choose Microsoft Word from the list. If you are unable to see Microsoft Word from the list, click the
Browse button. Browse to the folder: C:\Program Files\Microsoft Office\Office12, and choose
WINWORD.EXE.
Click
OK to save the settings.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything
I can do for you, please feel free to let me know.
Hope that helps.
Sincerely
William Zhou CHN
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file. I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.

Can you drag it to the Desktop?

Adobe Muse won't publish (Error uploading file)

After making simple animations using Adobe Edge Animate it seems as though none of the assets will publish with my site after importing them into Muse.
In Edge animate I saved for "web animation" and published. Then I went to muse and hit "place". I went to preview and everything works fine. When I go to publish there are always errors in uploading my assets with '.png' extensions.
Any help is much appreciated. I have completely scrapped my website and created another, reinstalled Animate and have renamed all my files, I'm not sure whats wrong here.
I got one animation working, and that can be seen here under the Photography section, but I have multiples that will be shown on my page at one time.
http://chasebodydesign.businesscatalyst.com

I get the error uploading file everytime I try publishing the animation.

"The upload has failed. There was a problem running a virus scan for the file." any ideas???

"The upload has failed.
There was a problem running a virus scan for the file. "
This is the message i get when tryng to update
any ideas?

Error: "svr.VirusScanExecutionError"
An intermittent problem with acrobat.com's underlying virus scan component causes this issue. This issue happens occasionally on a small number of server instances.
The solution is to update the article again. Trying again typically routes you to a different host in the server array.

I get an error FRM-92101:There was a failure in the Forms Server

I get an error FRM-92101:There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details, when i open the form
it's a fresh installation for the oracle application 12.1.1 vis on linux redhat 5

Hi;
Please check below note:
FRM-92101: There Was a Failure in the Forms Server During Startup After Fresh R12 Installation [ID 429627.1]
R12 fresh install FORMS DO NOT LAUNCH - FRM-92101/500 [ID 427714.1]
FRM-92101: Forms Server oracle.forms.net.ConnectionException: Forms session <1> failed during startup: no response from runtime process [ID 880088.1]
Also check:
Re: R12 database and JRE Issue
Regard
Helios

Error Uploading Files - One or more files could not be uploaded

Hi, I used Adobe SendNow without any problems for years. Since the migration to Adobe Acrobat, I don't think I have once managed to successfully send any files. Each time I get the message: Error Uploading Files - One or more files could not be uploaded. Please try again. If someone could help that would be great or else I will need to subscribe to alternative file sharing service that actually uploads files. I previously filed a Case Request looking for assistance, and within 2 seconds I received an automated response: "With this response, we believe your issue is resolved and have therefore closed your case 0186251803" !!!

Hi,
Those sizes (and numbers and numbers of files) shouldn't present any problem, but obviously something is amiss.
If you wouldn't mind trying to upload via the Files tab, and then sending from there, that would help us to diagnose. To upload your files, simply sign in and click on the Files tab. You might want to make a folder to hold the files you are going to send. To do this, click on the folder with the + sign. Then open that folder and click on the cloud with the arrow.
(The other way to upload files is to simply drag and drop them.) If you have trouble uploading many files at once (you shouldn't!), try one at a time. Again, I am interested to know what method, if any, works for you.
Now that you have your files uploaded (at least, I hope you've been able to do it successfully!), click on the Send tab and follow the instructions for selecting Acrobat.com Files instead of My Computer.
You should now see the folder you just created. Open it up, and select the files you want to send.
If you have any trouble with this method, give a holler. Though since it's getting late here on the east coast, I might not be able to respond until the morning.

Error - no response from the server

Attempting to upload my first file (18,888 KB) to the acrobat.com server with this consistent error message:
"Error: Acrobat did not get a response from the server. Try again later or contact your system administrator." When I cancel the message after a retry, the following message appears: "The following files were not uploaded due to an unknown error."
Support yesterday indicated to restart my machine - same result. A bit desperate to get this up and running since I like the whole concept of sharing and presenting technical information. Help!
Charles

Did you ever figure out a solution to this problem? I am getting the same message and can't figure out how to fix it. Thanks!

"This message may not have been delivered to User Name because there was no response from the server." in IM chat

Hello All,
Sometime users are getting below error message on the IM windows when they having P2P IM Chat.
"This message may not have been delivered to User Name because there
was no response from the server."
I can see below error on the Lync 2013 Monitoring page.

Hi,
Please make sure all required ports have been allowed. You can verify that all ports are open can accepting connections using telnet.
Telnet from External Client:
Test to SIP.domain.com 443/SIP
Test to WebConf.domain.com 443/PSOM
Test to AV.domain.com 443/STUN
Telnet from Lync 2013 Edge:
Telnet to Pool.domain.com 5061/SIP
Telnet from Lync 2013 Pool:
Telnet to LyncEdge.domain.com 5061
Telnet to LyncEdge.domain.com 443
Telnet to LyncEdge.domain.com 5062
Telnet to LyncEdge.domain.com 4443
Telnet to LyncEdge.domain.com 8057
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

An FTP Error occured - cannot make connection to host. No response from the server

"An FTP Error occured - cannot make connection to host. No response from the server".
As of today this is all i get when trying to connect to every single ftp account i have. It's not the server cause it's every one and there is several different. Tried passive and non-passive same result. I've connected fine with other FTP clients. So this must be another dreamweaver bug. Anyone know what to do?

Very hard to diagnose these problems, particularly as you can connect using a 3rd party program.
See if the 'timeout' issue could be at play here:
http://forums.adobe.com/message/708941#708941

SSRS in SharePoint2013:Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModule

SSRS in SharePoint2013: There is a report in SharePoint and it contains a sub-report and the sub-report hyperlink. When I click the hyperlink to go to the sub-report, after >10min, I click the "Back to.." button
on IE to go to the previous page. Then it catch the error as:
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled.
Details: Error parsing near '
<!DOCTYPE html PUB'.
I am using SQL2012 and Sharpoint2013.

Hi Alisa,
Thanks for your reply, I changed the web.config, but the issue did not resolved.
I add the codes in two parts of the web.config as below, you can find in by keywords “aspnet:MaxHttpCollectionKeys”
This issue can not reproduce on Chrome only occur on IE.
So, do you have some details suggestion for me to fix it?
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<configuration>
<configSections>
<sectionGroup name="SharePoint">
</sectionGroup>
<location path="_layouts/15/TA_AppMonitoringDetails.aspx">
<appSettings>
<add key="ChartImageHandler" value="storage=memory;timeout=20" />
</appSettings>
</location>
<location path="_layouts/15/ReportServer/RSViewerPage.aspx">
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
</appSettings>
</location>
<system.net>
<defaultProxy />
</system.net>
<appSettings>
<add key="aspnet:MaxHttpCollectionKeys" value="10000" />
<add key="aspnet:RestrictXmlControls" value="true" />
<add key="FeedCacheTime" value="300" />
<add key="FeedPageUrl" value="/_layouts/15/feed.aspx?" />
<add key="FeedXsl1" value="/Style Library/Xsl Style Sheets/Rss.xsl" />
<add key="ReportViewerMessages" value="Microsoft.SharePoint.Portal.Analytics.UI.ReportViewerMessages, Microsoft.SharePoint.Portal, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
</appSettings>

Server response: "Error uploading file *-sprite.png. There was no respone from the server....."

Similar Messages

Maybe you are looking for